d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1fe048505d
freebsd-nq/sys/pci
History
Justin T. Gibbs ea4f3c468a Clean up the memory mapped/Programmed I/O stuff so that the driver completely 
uses one or the other.  This required some changes to the ahc_reset()
function, and how early the probes had to allocate their softc.

Turn the AHC_IN/OUT* macros into inline functions and lowercase their names
to indicate this change.  Geting AHC_OUTSB to work as a macro doing
conditional memory mapped I/O would have been too gross.

Be smart about the STPWEN control bit in SCFRCTL1.  It should only be set
if the low byte of the bus is to be terminated.  We figure this out either
by "caching" the value left over from the BIOS setup before we reset the card
or by using the values stored in the seeprom if it is availible.
1996-11-11 05:26:14 +00:00
..
aic7870.c Clean up the memory mapped/Programmed I/O stuff so that the driver completely 1996-11-11 05:26:14 +00:00
bt9xx.c Updated #includes to 4.4lite style. 1996-10-15 19:22:46 +00:00
cy_pci.c Updated #includes to 4.4lite style. 1996-10-15 19:22:46 +00:00
cy_pcireg.h Changes to add support for the PCI version of the Cyclades Cyclom-Y 1996-10-13 01:09:24 +00:00
dc21040.h Updated driver to a newer version from Matt Thomas, preserving our local 1996-09-18 14:44:31 +00:00
if_de.c Put the packet error printf inside #ifdef DIAGNOSTIC. 1996-11-10 13:36:46 +00:00
if_ed_p.c Updated #includes to 4.4lite style. 1996-10-15 19:22:46 +00:00
if_fxp.c Removed nested include if <sys/socket.h> from <net/if.h> and 1996-10-12 19:49:43 +00:00
if_fxpreg.h Removed sections 3 and 4 from my copyright. 1996-04-08 01:31:42 +00:00
if_lnc_p.c FINALLY: PCI support for the Lance Ethernet driver. 1996-07-18 22:03:47 +00:00
if_pdq.c Updated #includes to 4.4Lite style. 1996-09-10 08:32:01 +00:00
if_sr_p.c Add support for the SDL RISCom N2pci cards. Bring in the enhancements 1996-10-29 03:53:21 +00:00
if_vx_pci.c New vx driver for: 1996-11-04 22:17:20 +00:00
locate.pl Perl script to convert NCR script address into label+offset. 1995-09-08 19:37:11 +00:00
meteor_reg.h Here is a patch that fix a few problems with the RGB version of 1996-06-07 03:03:25 +00:00
meteor.c Updated #includes to 4.4lite style. 1996-10-15 19:22:46 +00:00
ncr.c Only access the specific interrupt status registers if required. 1996-11-08 23:46:04 +00:00
ncrreg.h Improve support of SCSI cards based on the 53c860 and 53c875. 1996-10-11 19:50:12 +00:00
pci_ioctl.h Definitions for ioctl() accesses to PCI config space registers. 1996-10-22 20:33:19 +00:00
pci.c Add support for ioctl() accesses to PCI config space registers. 1996-10-22 20:20:14 +00:00
pcibus.h Fix a bunch of spelling errors in the comment fields of 1996-01-30 23:02:38 +00:00
pcireg.h Add support for ioctl() accesses to PCI config space registers. 1996-10-22 20:20:14 +00:00
pcisupport.c Re-enable conf82371fb2 now that I have verified that it works, even if 1996-09-16 08:56:39 +00:00
pcivar.h Removed more devconf leftovers. 1996-09-10 23:31:13 +00:00
pdq_os.h Removed $Log$ 1996-05-02 14:58:15 +00:00
pdq.c Updated #includes to 4.4Lite style. 1996-09-10 08:32:01 +00:00
pdqreg.h Fix a bunch of spelling errors in the comment fields of 1996-01-30 23:02:38 +00:00
README.de Make this documentation more sane in the context of 2.0. 1994-10-29 13:13:40 +00:00
README.de-le Make this documentation more sane in the context of 2.0. 1994-10-29 13:13:40 +00:00
wd82371.c The Great PC98 Merge. 1996-06-14 11:02:28 +00:00
wd82371reg.h Implement a prototype interface to bus-master IDE DMA on the Triton 1996-01-28 22:16:20 +00:00

README.de-le 

$Id: README.de-le,v 1.1 1994/10/01 20:16:44 wollman Exp $

----------------

The enclosed drivers should be considered beta-test software.  These
drivers are in no way supported by Digital Equipment.  See the
disclaimers in the sources for more information.  Please be aware that
Digital does not employee me to write drivers for FreeBSD.

This kit contains one driver:

	de	DEC DE435 PCI NIC or compatible

See README.de for information and installation instruction specific to this
driver.

Could you please send me the startup messages in the boot
long along with the type of your PC once the driver configures?  

If you have any problems, comments, suggestions, rant or raves, don't
hesitate to send me mail @ thomas@lkg.dec.com.

Lastly, if you change or modify the code, I want context diffs of your
changes.  I want this to the canonical DEC EtherWORKS driver kit for
FreeBSD, NetBSD, BSD/386, and any other BSD based O/S.  Please make
sure your diffs are approriate conditionalized.

Thanks,
Matt Thomas
--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/