dd991bd5a1
These firmwares were obtained from the beta "Chelsio T5/T4 Unified Wire v2.12.0.2 for Linux" release. Changes since last release are listed in the "Release Notes" accompanying the beta release and are copy-pasted here as well. The plan is to have only GA'd firmwares in any -STABLE FreeBSD branch so I'll MFC this (after 2 months) only if it ends up in a GA release. ================================================================================ ================================================================================ 22.1. T5 Firmware +++++++++++++++++++++++++++++++++ Version : 1.15.28.0 Date : 02/29/2016 ================================================================================ FIXES ----- BASE: - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress queue was ignored. - Fixed an issue where adapter failed to load fw by adjusting DRAM frequency. - Fixed an issue in watchdog which was causing VM bring-up failure after reboot. - Fixed 40G link failures with some switches when auto-negotiation enabled. - Fixed to improve on link bring-up time. - Per port buffer groups size doubled to improve performance. - Fixed an issue where bogus d3hot bits were set causing traffic stall. - Fixed an issue where sometimes adapter was not seen after reboot. - Fixed an issue where iWARP was crashing in conjunction with traffic management. - Fixed an issue where link failed to come up after removing twinax cable and inserting optical module. OFLD - Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag. FOiSCSI - Fixed an issue in recovery path where connection was getting closed before recovery processing was done. - Fixed an issue in TCP port reuse. - Fixed an issue in recovery path when large number (>64) of iSCSI connections were in use. - Returned ENETUNREACH if IP was not been provisioned yet and driver tried to use given inerface. ENHANCEMENTS ------------ BASE: - Added new interface to program DCA settings in SGE contexts; allow 32-byte IQE size - Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment. - Added MPS raw interface. ETH: - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx. OFLD: - WR opcode is returned to host in cqe error response. ================================================================================ ================================================================================ 22.2. T4 Firmware +++++++++++++++++ Version : 1.15.28.0 Date : 02/29/2016 ================================================================================ FIXES ----- BASE: - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue was ignored. - Fixed an issue in watchdog which was causing VM bring-up failure after reboot. - Per port buffer groups size doubled to improve performance. - Fixed an issue where iWARP was crashing in conjunction with traffic management. FOiSCSI: - Fixed an issue in recovery path where connection was getting closed before recovery processing was done. - Fixed an issue in TCP port reuse. - Fixed an issue in recovery path when large number (>64) of iSCSI connections were in use. - Returned ENETUNREACH if IP had not been provisioned yet and driver tried to use given inerface. ENHANCEMENTS ------------ BASE: - Added MPS raw interface. ETH: - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx. ================================================================================ Obtained from: Chelsio Communications MFC after: 2 months Sponsored by: Chelsio Communications
193 lines
3.8 KiB
Plaintext
193 lines
3.8 KiB
Plaintext
# Firmware configuration file.
|
|
#
|
|
# Global limits (some are hardware limits, others are due to the firmware).
|
|
# nvi = 128 virtual interfaces
|
|
# niqflint = 1023 ingress queues with freelists and/or interrupts
|
|
# nethctrl = 64K Ethernet or ctrl egress queues
|
|
# neq = 64K egress queues of all kinds, including freelists
|
|
# nexactf = 512 MPS TCAM entries, can oversubscribe.
|
|
#
|
|
|
|
[global]
|
|
rss_glb_config_mode = basicvirtual
|
|
rss_glb_config_options = tnlmapen, hashtoeplitz, tnlalllkp
|
|
|
|
# PL_TIMEOUT register
|
|
pl_timeout_value = 200 # the timeout value in units of us
|
|
|
|
sge_timer_value = 1, 5, 10, 50, 100, 200 # usecs
|
|
|
|
# enable TP_OUT_CONFIG.IPIDSPLITMODE
|
|
reg[0x7d04] = 0x00010000/0x00010000
|
|
|
|
# disable TP_PARA_REG3.RxFragEn
|
|
reg[0x7d6c] = 0x00000000/0x00007000
|
|
|
|
# enable TP_PARA_REG6.EnableCSnd
|
|
reg[0x7d78] = 0x00000400/0x00000000
|
|
|
|
# TP_SHIFT_CNT
|
|
reg[0x7dc0] = 0x62f8849
|
|
|
|
# TP_GLOBAL_CONFIG
|
|
reg[0x7d08] = 0x00000800/0x00000800 # set IssFromCplEnable
|
|
|
|
# TP_PARA_REG0
|
|
reg[0x7d60] = 0x06000000/0x07000000 # set InitCWND to 6
|
|
|
|
filterMode = fragmentation, mpshittype, protocol, vlan, port, fcoe
|
|
filterMask = protocol, fcoe
|
|
|
|
# TP rx and tx channels (0 = auto).
|
|
tp_nrxch = 0
|
|
tp_ntxch = 0
|
|
|
|
# TP rx and tx payload memory (% of the total EDRAM + DDR3).
|
|
tp_pmrx = 38, 512
|
|
tp_pmtx = 60, 512
|
|
tp_pmrx_pagesize = 64K
|
|
tp_pmtx_pagesize = 64K
|
|
|
|
# cluster, lan, or wan.
|
|
tp_tcptuning = lan
|
|
|
|
# TP OFLD MTUs
|
|
tp_mtus = 88, 256, 512, 576, 808, 1024, 1280, 1488, 1500, 2002, 2048, 4096, 4352, 8192, 9000, 9600
|
|
|
|
# MC configuration
|
|
mc_mode_brc[0] = 1 # mc0 - 1: enable BRC, 0: enable RBC
|
|
mc_mode_brc[1] = 1 # mc1 - 1: enable BRC, 0: enable RBC
|
|
|
|
# ULP_TX_CONFIG
|
|
reg[0x8dc0] = 0x00000004/0x00000004 # Enable more error msg for ...
|
|
# TPT error.
|
|
|
|
# PFs 0-3. These get 8 MSI/8 MSI-X vectors each. VFs are supported by
|
|
# these 4 PFs only. Not used here at all.
|
|
[function "0"]
|
|
nvf = 16
|
|
nvi = 1
|
|
rssnvi = 0
|
|
[function "0/*"]
|
|
nvi = 1
|
|
rssnvi = 0
|
|
|
|
[function "1"]
|
|
nvf = 16
|
|
nvi = 1
|
|
rssnvi = 0
|
|
[function "1/*"]
|
|
nvi = 1
|
|
rssnvi = 0
|
|
|
|
[function "2"]
|
|
nvf = 16
|
|
nvi = 1
|
|
rssnvi = 0
|
|
[function "2/*"]
|
|
nvi = 1
|
|
rssnvi = 0
|
|
|
|
[function "3"]
|
|
nvf = 16
|
|
nvi = 1
|
|
rssnvi = 0
|
|
[function "3/*"]
|
|
nvi = 1
|
|
rssnvi = 0
|
|
|
|
# PF4 is the resource-rich PF that the bus/nexus driver attaches to.
|
|
# It gets 32 MSI/128 MSI-X vectors.
|
|
[function "4"]
|
|
wx_caps = all
|
|
r_caps = all
|
|
nvi = 32
|
|
rssnvi = 8
|
|
niqflint = 512
|
|
nethctrl = 1024
|
|
neq = 2048
|
|
nexactf = 328
|
|
cmask = all
|
|
pmask = all
|
|
|
|
# driver will mask off features it won't use
|
|
protocol = ofld
|
|
|
|
tp_l2t = 4096
|
|
tp_ddp = 2
|
|
|
|
# TCAM has 8K cells; each region must start at a multiple of 128 cell.
|
|
# Each entry in these categories takes 4 cells each. nhash will use the
|
|
# TCAM iff there is room left (that is, the rest don't add up to 2048).
|
|
nroute = 32
|
|
nclip = 32
|
|
nfilter = 1008
|
|
nserver = 512
|
|
nhash = 16384
|
|
|
|
# PF5 is the SCSI Controller PF. It gets 32 MSI/40 MSI-X vectors.
|
|
# Not used right now.
|
|
[function "5"]
|
|
nvi = 1
|
|
rssnvi = 0
|
|
|
|
# PF6 is the FCoE Controller PF. It gets 32 MSI/40 MSI-X vectors.
|
|
# Not used right now.
|
|
[function "6"]
|
|
nvi = 1
|
|
rssnvi = 0
|
|
|
|
# The following function, 1023, is not an actual PCIE function but is used to
|
|
# configure and reserve firmware internal resources that come from the global
|
|
# resource pool.
|
|
[function "1023"]
|
|
wx_caps = all
|
|
r_caps = all
|
|
nvi = 4
|
|
rssnvi = 0
|
|
cmask = all
|
|
pmask = all
|
|
nexactf = 8
|
|
nfilter = 16
|
|
|
|
# MPS has 192K buffer space for ingress packets from the wire as well as
|
|
# loopback path of the L2 switch.
|
|
[port "0"]
|
|
dcb = none
|
|
bg_mem = 25
|
|
lpbk_mem = 25
|
|
hwm = 30
|
|
lwm = 15
|
|
dwm = 30
|
|
|
|
[port "1"]
|
|
dcb = none
|
|
bg_mem = 25
|
|
lpbk_mem = 25
|
|
hwm = 30
|
|
lwm = 15
|
|
dwm = 30
|
|
|
|
[port "2"]
|
|
dcb = none
|
|
bg_mem = 25
|
|
lpbk_mem = 25
|
|
hwm = 30
|
|
lwm = 15
|
|
dwm = 30
|
|
|
|
[port "3"]
|
|
dcb = none
|
|
bg_mem = 25
|
|
lpbk_mem = 25
|
|
hwm = 30
|
|
lwm = 15
|
|
dwm = 30
|
|
|
|
[fini]
|
|
version = 0x1
|
|
checksum = 0x7044b7fd
|
|
#
|
|
# $FreeBSD$
|
|
#
|