d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
2d46b036a0
freebsd-nq/sys/dev
History
Stanislav Galabov 2d46b036a0 Enable 4-byte address support for the mx25l family of SPI flash devices. 
Introduce 2 new flags:
- FL_ENABLE_4B_ADDR (forces the use of 4-byte addresses)
- FL_DISABLE_4B_ADDR (forces the use of 3-byte addresses)

If an SPI flash chip is defined with FL_ENABLE_4B_ADDR in its flags,
then an 'Enter 4-byte mode' command is sent to the chip at attach time
and, later, all commands that require addressing are issued with 4-byte
addresses.
If an SPI flash chip is defined with FL_DISABLE_4B_ADDR in its flags,
then an 'Exit 4-byte mode' command is sent to the chip at attach time
and, later, all commands that require addressing are issued with 3-byte
addresses.
For chips that do not have any of these flags defined the behaviour is
unchanged.

This change also adds support for the MX25L25735F and MX25L25635E chips
(vendor id 0xc2, device id 0x2019), which support 4-byte mode and enables
4-byte mode for them. These are 256Mbit devices (32MiB) and, as such, can
only be fully addressed by using 4-byte addresses.

Approved by:	adrian (mentor)
Sponsored by:	Smartcom - Bulgaria AD
Differential Revision:	https://reviews.freebsd.org/D5808
2016-04-04 06:55:48 +00:00
..
aac Remove taskqueue_enqueue_fast(). 2016-03-01 17:47:32 +00:00
aacraid Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
acpi_support Fix previous commit (r284357) 2015-06-13 22:29:43 +00:00
acpica Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. 2016-03-18 01:28:41 +00:00
adb
adlink
advansys Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. 2016-03-18 01:28:41 +00:00
ae Fix a potentially "forever" loop. 2016-02-17 21:24:26 +00:00
age Fix variable assignment. 2016-02-18 01:24:10 +00:00
agp agp: Do not attach to Intel GEN6+ 2016-03-12 09:44:23 +00:00
aha Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
ahb Remove MAXBSIZE use from drivers where it has nothing to do. 2015-03-22 16:10:28 +00:00
ahci Disable MSI-x for AHCI on Alpine plattform 2016-03-31 11:18:52 +00:00
aic Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
aic7xxx Fix LDADD/DPADD that should be LIBADD. 2015-12-04 03:17:47 +00:00
alc Fix variable assignment. 2016-02-18 01:24:10 +00:00
ale Fix variable assignment. 2016-02-18 01:24:10 +00:00
alpm
altera As <machine/vm.h> is included from <vm/vm.h>, there is no need to 2016-02-22 09:10:23 +00:00
amdpm
amdsbwd Add support for AMD FCH watchdog timers. 2016-03-29 12:19:46 +00:00
amdsmb
amdtemp Add one more AMD Kaveri APU device ID. 2014-10-13 13:13:42 +00:00
amr Don't assume that bio_cmd is a bitfield. 2016-03-10 00:36:52 +00:00
an Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
arcmsr Make sure we check for CAM_CDB_POINTER for all drivers. Also, for the 2016-03-15 05:17:29 +00:00
asmc Fix undefined behavior when using asmc_fan_getstring() 2016-01-05 10:25:22 +00:00
ata Small typo. 2016-03-29 23:33:44 +00:00
ath [net80211] migrate the time_* macros to ieee80211_* namespace. 2016-03-30 00:44:10 +00:00
atkbdc Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. 2016-03-18 01:28:41 +00:00
auxio
bce Correct a typo. 2015-02-24 01:00:46 +00:00
beri Allow BERI virtio-platform code to operate with no PIO devices specified. 2015-07-03 14:27:28 +00:00
bfe
bge bge(4): Small memory leak 2015-03-08 19:55:46 +00:00
bhnd Fix the resource_list_print_type() calls to use uintmax_t. 2016-03-22 22:25:08 +00:00
bktr
bm
buslogic Remove MAXBSIZE use from drivers where it has nothing to do. 2015-03-22 16:10:28 +00:00
bvm
bwi net80211 drivers: fix ieee80211_init_channels() usage 2016-01-07 18:41:03 +00:00
bwn [bwn] fix time_before -> ieee80211_time_before() 2016-03-30 06:48:09 +00:00
bxe Modifications to achieve a common source base from FreeBSD7.x thru 10.x 2016-03-21 18:48:20 +00:00
cadence Use the new ifnet API. Also, allocate bus_dma_maps as needed instead of 2015-03-09 22:39:58 +00:00
cardbus Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. 2016-03-18 01:28:41 +00:00
cas
ce As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to 2016-02-22 09:02:20 +00:00
cesa Make the fdt_get_mem_regions memsize argument optional. It's only used in 2016-03-01 09:45:27 +00:00
cfe Convert remaining {g,s}etenv->kern_{g,s}etenv 2014-10-17 17:34:05 +00:00
cfi Provide a workaround for setting the correct endianness when doing CFI on 2016-02-04 22:39:27 +00:00
ciss r249170 was just plain wrong. The effect of the change is to always 2015-09-03 17:46:57 +00:00
cm Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
cmx Create a generic PCCARD_PNP_INFO from the MODULE_PNP_INFO building 2015-12-11 05:27:56 +00:00
coretemp
cp As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to 2016-02-22 09:02:20 +00:00
cpuctl Increase allowed size of the microcode blob to 32KB. Some Intel CPU's 2014-12-20 16:40:49 +00:00
cpufreq
cs Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
ct Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
ctau Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. 2016-03-18 01:28:41 +00:00
cx Convert rman to use rman_res_t instead of u_long 2016-01-27 02:23:54 +00:00
cxgb tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication 2016-04-01 06:28:33 +00:00
cxgbe tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication 2016-04-01 06:28:33 +00:00
cy Fix the build. 2016-02-25 04:32:17 +00:00
cyapa Allow building a kernel with baked in ig4, isl and cyapa drivers. 2015-08-19 09:49:29 +00:00
dc Remove break after return. 2015-01-23 15:14:30 +00:00
dcons CALLOUT_MPSAFE has lost its meaning since r141428, i.e., for more than ten 2015-05-22 17:05:21 +00:00
de Fix build when KTR is defined but not KTR_TULIP. 2015-11-20 09:37:04 +00:00
digi Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
dpaa Use the m_extadd() function instead of deprecated MEXTADD(). 2016-03-02 02:29:35 +00:00
dpms
dpt Remove MAXBSIZE use from drivers where it has nothing to do. 2015-03-22 16:10:28 +00:00
drm As <machine/param.h> is included from <sys/param.h>, there is no need 2016-02-22 09:04:36 +00:00
drm2 Handle the driver KPI change from r292373. Ensure that managed device 2016-03-24 09:56:53 +00:00
dwc Add support for resetting the PHY via GPIO. 2016-03-03 22:26:36 +00:00
e1000 tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication 2016-04-01 06:28:33 +00:00
ed Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. 2016-03-18 01:28:41 +00:00
eisa Introduce a RMAN_IS_DEFAULT_RANGE() macro, and use it. 2016-02-20 01:32:58 +00:00
en To ease changes to underlying mbuf structure and the mbuf allocator, reduce 2015-01-05 09:58:32 +00:00
ep These files were getting sys/malloc.h and vm/uma.h with header pollution 2016-02-01 17:41:21 +00:00
esp
et
etherswitch [mdio] migrate mdiobus out of etherswitch and into a top-level device of its own. 2015-12-26 02:31:39 +00:00
ex Create a generic PCCARD_PNP_INFO from the MODULE_PNP_INFO building 2015-12-11 05:27:56 +00:00
exca
extres Pass clkdev_if methods through to parent device by default. 2016-03-28 11:51:35 +00:00
fatm To ease changes to underlying mbuf structure and the mbuf allocator, reduce 2015-01-05 09:58:32 +00:00
fb As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to 2016-02-22 09:02:20 +00:00
fdc Add raw RX-50 support. These are 400k single sided disks with 80 2016-03-10 00:36:38 +00:00
fdt ARM: Parse command line delivered by U-Boot: 2016-03-26 06:59:01 +00:00
fe Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
ffec Add busdma sync ops before reading and after modifying the descriptor rings. 2014-11-24 16:12:11 +00:00
filemon Remove unneeded return left from refactoring. 2016-03-25 00:14:56 +00:00
firewire Don't assume bio_cmd is a bit field. 2016-03-10 00:36:45 +00:00
flash Enable 4-byte address support for the mx25l family of SPI flash devices. 2016-04-04 06:55:48 +00:00
fxp These files were getting sys/malloc.h and vm/uma.h with header pollution 2016-02-01 17:41:21 +00:00
gem
glxiic Prevent overflow issues in timeout processing 2014-11-21 21:01:24 +00:00
glxsb Huge cleanup of random(4) code. 2015-06-30 17:00:45 +00:00
gpio Fix the resource_list_print_type() calls to use uintmax_t. 2016-03-22 22:25:08 +00:00
gxemul CALLOUT_MPSAFE has lost its meaning since r141428, i.e., for more than ten 2015-05-22 17:05:21 +00:00
hatm Fix multiple incorrect SYSCTL arguments in the kernel: 2014-10-21 07:31:21 +00:00
hifn Huge cleanup of random(4) code. 2015-06-30 17:00:45 +00:00
hme
hpt27xx Replace several bus_alloc_resource() calls with bus_alloc_resource_any() 2016-02-27 03:34:01 +00:00
hptiop Replace several bus_alloc_resource() calls using default arguments with bus_alloc_resource_any() 2016-02-19 03:37:56 +00:00
hptmv Replace several bus_alloc_resource() calls with bus_alloc_resource_any() 2016-02-27 03:34:01 +00:00
hptnr Replace several bus_alloc_resource() calls with bus_alloc_resource_any() 2016-02-27 03:34:01 +00:00
hptrr Replace several bus_alloc_resource() calls with bus_alloc_resource_any() 2016-02-27 03:34:01 +00:00
hwpmc If full width writes to the performance monitoring counters are 2016-02-12 07:27:24 +00:00
hyperv tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication 2016-04-01 06:28:33 +00:00
ic - Add support for Advantech PCI-1602 Rev. B1 and PCI-1603 cards. [1] 2016-01-10 18:11:23 +00:00
ichiic Allow building a kernel with baked in ig4, isl and cyapa drivers. 2015-08-19 09:49:29 +00:00
ichsmb Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
ichwd Unify ichwd(4) attachment messages in dmesg. 2016-03-24 23:24:00 +00:00
ida Remove MAXBSIZE use from drivers where it has nothing to do. 2015-03-22 16:10:28 +00:00
ie In order to reduce use of M_EXT outside of the mbuf allocator and 2015-01-06 12:59:37 +00:00
if_ndis Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
iicbus Fix the resource_list_print_type() calls to use uintmax_t. 2016-03-22 22:25:08 +00:00
iir Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. 2016-03-18 01:28:41 +00:00
intpm
io
ioat ioat(4): On error detected in ithread, defer HW reset to taskqueue 2016-02-13 22:51:25 +00:00
ipmi Optimize IPMI watchdog patting. 2016-03-22 06:24:52 +00:00
ips - Use the existing driver lock in cdevsw methods and remove D_NEEDGIANT. 2014-11-13 22:06:57 +00:00
ipw net80211 & wireless drivers: remove duplicate defines (noop) 2015-09-22 02:44:59 +00:00
isci Make sure we check for CAM_CDB_POINTER for all drivers. Also, for the 2016-03-15 05:17:29 +00:00
iscsi Fix iSCSI initiator crash that could happen with out-of-memory 2016-03-25 16:01:40 +00:00
iscsi_initiator These files were getting sys/malloc.h and vm/uma.h with header pollution 2016-02-01 17:41:21 +00:00
isl Allow building a kernel with baked in ig4, isl and cyapa drivers. 2015-08-19 09:49:29 +00:00
ismt ismt: fix ISMT_DESC_ADDR_RW macro 2016-01-07 21:16:44 +00:00
isp Move to new value for XPT_GET_SIM_KNOB to avoid clash with XPT_ATA_IO. 2016-03-10 06:25:05 +00:00
ispfw Rip off target mode support for parallel SCSI QLogic adapters. 2015-11-23 10:06:19 +00:00
iwi net80211 drivers: fix ieee80211_init_channels() usage 2016-01-07 18:41:03 +00:00
iwm [iwm] fix up the rate control setup code to initialise rates in the order 2016-01-18 05:43:34 +00:00
iwn [iwn] Don't try to seamlessly recover from a firmware panic; just restart 2016-04-03 23:39:58 +00:00
ixgb Replace several bus_alloc_resource() calls using default arguments with bus_alloc_resource_any() 2016-02-19 03:37:56 +00:00
ixgbe tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication 2016-04-01 06:28:33 +00:00
ixl tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication 2016-04-01 06:28:33 +00:00
jme Fix variable assignment. 2016-02-18 01:24:10 +00:00
joy There never was a PC Card joystick attachment that worked. Kill the 2014-11-22 20:31:20 +00:00
kbd
kbdmux Revert r281889: 2015-04-29 20:08:03 +00:00
ksyms
le Fix the resource_list_print_type() calls to use uintmax_t. 2016-03-22 22:25:08 +00:00
led This implements default-state support as described in: 2015-05-24 07:45:42 +00:00
lge
lmc Replace several bus_alloc_resource() calls using default arguments with bus_alloc_resource_any() 2016-02-19 03:37:56 +00:00
malo Remove taskqueue_enqueue_fast(). 2016-03-01 17:47:32 +00:00
mbox
mc146818 Use FreeBSD-bit-checking-style 2014-10-10 14:17:42 +00:00
mca Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. 2016-03-18 01:28:41 +00:00
mcd Add locking to mcd(4) and mark MPSAFE. 2014-11-18 21:51:01 +00:00
md For the MD_ROOT option don't inject /dev/md0 as root dev when ROOTDEVNAME 2016-03-09 19:36:25 +00:00
mdio [mdio] Add MDIO support for "extended" registers as defined by IEEE 802.3 Clause 45. 2015-12-26 17:22:02 +00:00
mem Remove Giant from /dev/mem and /dev/kmem. It is definitely not needed 2015-01-24 12:51:15 +00:00
mfi Remove bare & 0x3; it encodes the values of BIO_READ and 2016-03-15 04:56:39 +00:00
mge [mdio] migrate mdiobus out of etherswitch and into a top-level device of its own. 2015-12-26 02:31:39 +00:00
mii Disable EEE(Energy Efficient Ethernet) for RTL8211F PHY. 2015-12-03 05:27:39 +00:00
mk48txx
mlx Remove MAXBSIZE use from drivers where it has nothing to do. 2015-03-22 16:10:28 +00:00
mlx5 tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication 2016-04-01 06:28:33 +00:00
mly Remove MAXBSIZE use from drivers where it has nothing to do. 2015-03-22 16:10:28 +00:00
mmc Use correct response bits for MMC_RSP_R4-R7 types 2016-03-27 23:19:21 +00:00
mn In order to reduce use of M_EXT outside of the mbuf allocator and 2015-01-06 12:59:37 +00:00
mpr Don't retry SAS commands in response to protocol errors 2015-12-14 19:40:47 +00:00
mps Add sysctls for dumping out the device mapping tables. I'm finding this 2016-02-04 23:38:55 +00:00
mpt - In mpt_send_handshake_cmd(), use bus_space_write_stream_4(9) for writing 2015-07-24 16:00:35 +00:00
mrsas Fix NULL pointer dereferences 2016-02-25 02:46:47 +00:00
mse Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
msk ifnet lock was changed to use sx(9) long time ago. 2016-02-22 00:58:04 +00:00
mvs Fix some more long -> rman_res_t 2016-03-21 22:19:53 +00:00
mwl net80211: move ieee80211_free_node() call on error from ic_raw_xmit() to ieee80211_raw_output(). 2015-10-12 04:55:20 +00:00
mxge tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication 2016-04-01 06:28:33 +00:00
my In order to reduce use of M_EXT outside of the mbuf allocator and 2015-01-06 12:59:37 +00:00
nand No need to test command values this way. There can be only one, even 2015-12-18 05:55:24 +00:00
ncr Make sure we check for CAM_CDB_POINTER for all drivers. Also, for the 2016-03-15 05:17:29 +00:00
nctgpio Add support for the Nuvoton NCT5104D. 2016-03-31 04:57:38 +00:00
ncv Convert rman to use rman_res_t instead of u_long 2016-01-27 02:23:54 +00:00
netfpga10g/nf10bmac
netmap Plug leak in m_unshare. 2016-03-26 23:39:53 +00:00
nfe Remove taskqueue_enqueue_fast(). 2016-03-01 17:47:32 +00:00
nfsmb
nge Receive filter configuration is done in nge_rxfilter(). Remove 2015-01-12 07:43:19 +00:00
nmdm
nsp Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
ntb As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to 2016-02-22 09:02:20 +00:00
null Add missing privilege check when setting the dump device. Before that change it 2014-11-11 04:48:09 +00:00
nvd Revert r292074 (by smh): Limit stripesize reported from nvd(4) to 4K 2016-03-10 17:13:10 +00:00
nvme Revert r292074 (by smh): Limit stripesize reported from nvd(4) to 4K 2016-03-10 17:13:10 +00:00
nvram
nvram2env Convert remaining {g,s}etenv->kern_{g,s}etenv 2014-10-17 17:34:05 +00:00
nxge Fix what looks like a consistent copy&paste error. 2015-09-27 12:19:36 +00:00
oce tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication 2016-04-01 06:28:33 +00:00
ofw Reduce OFW PCI code duplication - involves ARM, PPC and SPARC64 2016-03-29 15:19:56 +00:00
otus These files were getting sys/malloc.h and vm/uma.h with header pollution 2016-02-01 17:41:21 +00:00
ow Simply to appease gcc's warnings. 2015-08-28 02:29:31 +00:00
patm Fix LDADD/DPADD that should be LIBADD. 2015-12-04 03:17:47 +00:00
pbio Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
pccard Move pccard_safe_quote() up to subr_bus.c and rename to 2016-03-28 20:16:29 +00:00
pccbb Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. 2016-03-18 01:28:41 +00:00
pcf Convert rman to use rman_res_t instead of u_long 2016-01-27 02:23:54 +00:00
pci Convert the printfs here from %lx to %jx as well after r297000 in order 2016-03-18 19:36:43 +00:00
pcn In order to reduce use of M_EXT outside of the mbuf allocator and 2015-01-06 12:59:37 +00:00
pdq In order to reduce use of M_EXT outside of the mbuf allocator and 2015-01-06 12:59:37 +00:00
pms As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to 2016-02-22 09:02:20 +00:00
powermac_nvram
ppbus Fix debug printf 2016-03-16 16:56:28 +00:00
ppc Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. 2016-03-18 01:28:41 +00:00
proto Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. 2016-03-18 01:28:41 +00:00
psci Start to support PSCI 1.0. For all the functions we currently support this 2015-08-11 13:42:58 +00:00
pst Cleanups to pst(4): 2014-11-18 21:58:57 +00:00
pty Remove printf only useful for debugging. 2016-01-22 20:28:24 +00:00
puc Replace some more default range checks with RMAN_IS_DEFAULT_RANGE(). 2016-03-02 03:26:56 +00:00
qlxgb tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication 2016-04-01 06:28:33 +00:00
qlxgbe Upgrade FW to 5.4.56 2016-01-26 22:32:58 +00:00
qlxge tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication 2016-04-01 06:28:33 +00:00
quicc Replace some more default range checks with RMAN_IS_DEFAULT_RANGE(). 2016-03-02 03:26:56 +00:00
ral net80211 drivers: fix ieee80211_init_channels() usage 2016-01-07 18:41:03 +00:00
random Don't start the random harvester process until timers are working. 2016-03-28 21:51:56 +00:00
rc Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
rccgpio Fix off-by-one bugs. 2015-09-07 21:59:11 +00:00
re Remove taskqueue_enqueue_fast(). 2016-03-01 17:47:32 +00:00
rl Fix a bug introduced in r295736 2016-02-18 03:05:08 +00:00
rndtest Huge cleanup of random(4) code. 2015-06-30 17:00:45 +00:00
rp Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
rt As <machine/pmap.h> is included from <vm/pmap.h>, there is no need to 2016-02-22 09:02:20 +00:00
rtwn rtwn: import r290048. 2016-02-21 18:51:48 +00:00
safe Huge cleanup of random(4) code. 2015-06-30 17:00:45 +00:00
sbni Allocate the PCI BAR resource with bus_alloc_resource_any() 2016-03-03 01:07:17 +00:00
scc Replace some more default range checks with RMAN_IS_DEFAULT_RANGE(). 2016-03-02 03:26:56 +00:00
scd Add locking to scd(4) and mark MPSAFE. 2014-11-18 22:02:37 +00:00
sdhci Fix fallout from r292180 (Dec 2015)... ensure that every driver which has 2016-03-21 00:52:24 +00:00
sec Accidentally dropped the 0 padding. 2016-01-01 17:56:52 +00:00
sf
sfxge Remove NULL checks after M_WAITOK allocations, which - by definition - can 2016-03-31 13:20:02 +00:00
sge
si Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
siba Fix the resource_list_print_type() calls to use uintmax_t. 2016-03-22 22:25:08 +00:00
siis Fix some more long -> rman_res_t 2016-03-21 22:19:53 +00:00
sio Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
sis Enable receive filter in sis_rxfilter(). 2015-01-12 07:37:06 +00:00
sk ifnet lock was changed to use sx(9) long time ago. 2016-02-22 00:58:04 +00:00
smbus Expand SMBUS API to add smbus_trans() function. 2015-04-25 16:15:01 +00:00
smc Remove taskqueue_enqueue_fast(). 2016-03-01 17:47:32 +00:00
sn Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
snc Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
snp
sound Add some device IDs found on AMD FCH shipsets. 2016-03-29 12:50:42 +00:00
speaker
spibus Add copyright statement I should have had on these files in 2006, 2015-02-18 14:33:33 +00:00
ste
stg Convert rman to use rman_res_t instead of u_long 2016-01-27 02:23:54 +00:00
stge Fix variable assignment. 2016-02-18 01:24:10 +00:00
streams fd: remove filedesc argument from fdclose 2015-04-11 15:40:28 +00:00
sym Add the arm64 define. 2015-10-08 17:32:17 +00:00
syscons Replace the cosine table with a sine table, which (due to the vagaries of 2016-01-02 16:40:37 +00:00
tdfx
terasic Merge from CheriBSD: 2014-11-21 21:34:19 +00:00
ti New sendfile(2) syscall. A joint effort of NGINX and Netflix from 2013 and 2016-01-08 20:34:57 +00:00
tl In order to reduce use of M_EXT outside of the mbuf allocator and 2015-01-06 12:59:37 +00:00
tpm
trm Remove MAXBSIZE use from drivers where it has nothing to do. 2015-03-22 16:10:28 +00:00
tsec Allow callers of OF_decode_addr to get the size of the found mapping. This 2016-02-16 15:18:12 +00:00
twa Replace several bus_alloc_resource() calls using default arguments with bus_alloc_resource_any() 2016-02-19 03:37:56 +00:00
twe Remove MAXBSIZE use from drivers where it has nothing to do. 2015-03-22 16:10:28 +00:00
tws Replace several bus_alloc_resource() calls with bus_alloc_resource_any() 2016-02-27 03:34:01 +00:00
tx These files were getting sys/malloc.h and vm/uma.h with header pollution 2016-02-01 17:41:21 +00:00
txp
uart Move support for Synopsys Designware APB UART out of ns8250 and into a 2016-04-01 20:26:45 +00:00
ubsec Huge cleanup of random(4) code. 2015-06-30 17:00:45 +00:00
urtwn [urtwn] welcome basic 11n support to urtwn. 2016-03-22 01:09:15 +00:00
usb Add new USB ID to UDL driver. 2016-03-30 10:05:52 +00:00
utopia
vge
viapm
viawd
videomode Add hskew field to struct videomode. It is required by some controllers 2015-06-18 00:22:14 +00:00
virtio Create an API to reset a struct bio (g_reset_bio). This is mandatory 2016-02-17 17:16:02 +00:00
vkbd
vmware/vmxnet3 Only use a power of 2 for the number of receive and transmit queues. 2015-11-16 21:36:50 +00:00
vnic tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication 2016-04-01 06:28:33 +00:00
vr Remove taskqueue_enqueue_fast(). 2016-03-01 17:47:32 +00:00
vt vt: Use textmode when we're running on hypervisors 2016-03-28 07:36:54 +00:00
vte Fix variable assignment. 2016-02-18 01:24:10 +00:00
vx In order to reduce use of M_EXT outside of the mbuf allocator and 2015-01-06 12:59:37 +00:00
vxge tcp/lro: Use tcp_lro_flush_all in device drivers to avoid code duplication 2016-04-01 06:28:33 +00:00
watchdog CALLOUT_MPSAFE has lost its meaning since r141428, i.e., for more than ten 2015-05-22 17:05:21 +00:00
wb In order to reduce use of M_EXT outside of the mbuf allocator and 2015-01-06 12:59:37 +00:00
wbwd Polish wbwd(4) driver and add more supported chips. 2016-03-24 20:52:35 +00:00
wds Add locking to wds(4) and mark MPSAFE. 2014-11-18 22:12:51 +00:00
wi Migrate many bus_alloc_resource() calls to bus_alloc_resource_anywhere(). 2016-02-27 03:38:01 +00:00
wl Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. 2016-03-18 01:28:41 +00:00
wpi wpi, iwn: fix check in find_eeprom_channel() 2016-04-03 14:38:26 +00:00
wtap wtap: do not include <sys/types.h> when <sys/param.h> is already included 2015-12-13 20:53:51 +00:00
xe Use uintmax_t (typedef'd to rman_res_t type) for rman ranges. 2016-03-18 01:28:41 +00:00
xen Pass through some new block device features. 2016-04-03 11:18:20 +00:00
xl These files were getting sys/malloc.h and vm/uma.h with header pollution 2016-02-01 17:41:21 +00:00