Bill Paul
c2c6548b3a
Teach the re(4) driver about the CFG2 register, which tells us whether
...
we're on a 32-bit/64-bit bus or not. Use this to decide if we should
set the PCI dual-address cycle enable bit in the C+ command register.
(Enabling DAC on a 32-bit bus seems to do bad things.)
Also, initialize the C+ command register early in the re_init() routine.
The documentation says this register should be configured first.
2003-09-13 23:51:35 +00:00
..
2003-08-22 07:20:27 +00:00
2003-08-22 07:20:27 +00:00
2003-08-22 07:20:27 +00:00
2003-04-07 10:06:48 +00:00
2003-08-22 07:20:27 +00:00
2003-08-23 19:32:18 +00:00
2003-08-22 07:20:27 +00:00
2003-08-22 07:20:27 +00:00
2003-08-22 07:20:27 +00:00
2003-08-23 18:00:31 +00:00
2003-08-22 07:20:27 +00:00
2003-09-06 14:04:30 +00:00
2003-06-11 06:34:30 +00:00
2003-09-02 17:30:40 +00:00
2003-07-19 06:01:15 +00:00
2003-08-22 07:20:27 +00:00
2003-06-13 22:34:03 +00:00
2003-09-02 17:30:40 +00:00
2003-08-22 07:20:27 +00:00
2003-09-11 04:05:01 +00:00
2003-09-13 23:51:35 +00:00
2003-08-22 07:20:27 +00:00
2003-09-05 22:33:44 +00:00
2003-09-05 22:33:44 +00:00
2003-08-22 07:20:27 +00:00
2003-08-22 07:20:27 +00:00
2002-12-23 21:50:47 +00:00
2003-08-22 07:20:27 +00:00
2002-11-09 12:55:07 +00:00
2003-08-22 07:20:27 +00:00
2002-10-21 02:54:50 +00:00
2003-08-22 07:20:27 +00:00
2003-02-01 01:27:05 +00:00
2003-08-22 07:20:27 +00:00
2003-08-23 18:09:25 +00:00
2003-07-10 05:24:33 +00:00
2003-08-22 07:20:27 +00:00
2003-08-26 16:57:24 +00:00
2003-08-23 02:25:04 +00:00
2002-06-26 03:37:47 +00:00
2002-06-26 03:37:47 +00:00
2003-08-22 07:20:27 +00:00
2003-09-02 17:30:40 +00:00