4b7ec27007
one. Interestingly, these are actually the default for quite some time (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9) since r52045) but even recently added device drivers do this unnecessarily. Discussed with: jhb, marcel - While at it, use DEVMETHOD_END. Discussed with: jhb - Also while at it, use __FBSDID.
990 lines
25 KiB
C
990 lines
25 KiB
C
/*-
|
|
* Copyright (c) 2010-2011 Juli Mallett <jmallett@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
|
|
#include <sys/bus.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/interrupt.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/module.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
#include <vm/vm_extern.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/cpu.h>
|
|
#include <machine/pmap.h>
|
|
|
|
#include <contrib/octeon-sdk/cvmx.h>
|
|
#include <contrib/octeon-sdk/cvmx-interrupt.h>
|
|
#include <contrib/octeon-sdk/cvmx-pcie.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <dev/pci/pcib_private.h>
|
|
|
|
#include <mips/cavium/octopcireg.h>
|
|
#include <mips/cavium/octopcivar.h>
|
|
|
|
#include "pcib_if.h"
|
|
|
|
#define NPI_WRITE(addr, value) cvmx_write64_uint32((addr) ^ 4, (value))
|
|
#define NPI_READ(addr) cvmx_read64_uint32((addr) ^ 4)
|
|
|
|
struct octopci_softc {
|
|
device_t sc_dev;
|
|
|
|
unsigned sc_domain;
|
|
unsigned sc_bus;
|
|
|
|
bus_addr_t sc_io_base;
|
|
unsigned sc_io_next;
|
|
struct rman sc_io;
|
|
|
|
bus_addr_t sc_mem1_base;
|
|
unsigned sc_mem1_next;
|
|
struct rman sc_mem1;
|
|
};
|
|
|
|
static void octopci_identify(driver_t *, device_t);
|
|
static int octopci_probe(device_t);
|
|
static int octopci_attach(device_t);
|
|
static int octopci_read_ivar(device_t, device_t, int,
|
|
uintptr_t *);
|
|
static struct resource *octopci_alloc_resource(device_t, device_t, int, int *,
|
|
u_long, u_long, u_long, u_int);
|
|
static int octopci_activate_resource(device_t, device_t, int, int,
|
|
struct resource *);
|
|
static int octopci_maxslots(device_t);
|
|
static uint32_t octopci_read_config(device_t, u_int, u_int, u_int, u_int, int);
|
|
static void octopci_write_config(device_t, u_int, u_int, u_int, u_int,
|
|
uint32_t, int);
|
|
static int octopci_route_interrupt(device_t, device_t, int);
|
|
|
|
static unsigned octopci_init_bar(device_t, unsigned, unsigned, unsigned, unsigned, uint8_t *);
|
|
static unsigned octopci_init_device(device_t, unsigned, unsigned, unsigned, unsigned);
|
|
static unsigned octopci_init_bus(device_t, unsigned);
|
|
static void octopci_init_pci(device_t);
|
|
static uint64_t octopci_cs_addr(unsigned, unsigned, unsigned, unsigned);
|
|
|
|
static void
|
|
octopci_identify(driver_t *drv, device_t parent)
|
|
{
|
|
/* XXX Check sysinfo flag. */
|
|
|
|
BUS_ADD_CHILD(parent, 0, "pcib", 0);
|
|
if (octeon_has_feature(OCTEON_FEATURE_PCIE))
|
|
BUS_ADD_CHILD(parent, 0, "pcib", 1);
|
|
}
|
|
|
|
static int
|
|
octopci_probe(device_t dev)
|
|
{
|
|
if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
|
|
device_set_desc(dev, "Cavium Octeon PCIe bridge");
|
|
return (0);
|
|
}
|
|
|
|
if (device_get_unit(dev) != 0)
|
|
return (ENXIO);
|
|
|
|
device_set_desc(dev, "Cavium Octeon PCI bridge");
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
octopci_attach(device_t dev)
|
|
{
|
|
struct octopci_softc *sc;
|
|
unsigned subbus;
|
|
int error;
|
|
|
|
sc = device_get_softc(dev);
|
|
sc->sc_dev = dev;
|
|
|
|
if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
|
|
sc->sc_domain = device_get_unit(dev);
|
|
|
|
error = cvmx_pcie_rc_initialize(sc->sc_domain);
|
|
if (error != 0) {
|
|
device_printf(dev, "Failed to put PCIe bus in host mode.\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* In RC mode, the Simple Executive programs the first bus to
|
|
* be numbered as bus 1, because some IDT bridges used in
|
|
* Octeon systems object to being attached to bus 0.
|
|
*/
|
|
sc->sc_bus = 1;
|
|
|
|
sc->sc_io_base = CVMX_ADD_IO_SEG(cvmx_pcie_get_io_base_address(sc->sc_domain));
|
|
sc->sc_io.rm_descr = "Cavium Octeon PCIe I/O Ports";
|
|
|
|
sc->sc_mem1_base = CVMX_ADD_IO_SEG(cvmx_pcie_get_mem_base_address(sc->sc_domain));
|
|
sc->sc_mem1.rm_descr = "Cavium Octeon PCIe Memory";
|
|
} else {
|
|
octopci_init_pci(dev);
|
|
|
|
sc->sc_domain = 0;
|
|
sc->sc_bus = 0;
|
|
|
|
sc->sc_io_base = CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI, CVMX_OCT_SUBDID_PCI_IO));
|
|
sc->sc_io.rm_descr = "Cavium Octeon PCI I/O Ports";
|
|
|
|
sc->sc_mem1_base = CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI, CVMX_OCT_SUBDID_PCI_MEM1));
|
|
sc->sc_mem1.rm_descr = "Cavium Octeon PCI Memory";
|
|
}
|
|
|
|
sc->sc_io.rm_type = RMAN_ARRAY;
|
|
error = rman_init(&sc->sc_io);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
error = rman_manage_region(&sc->sc_io, CVMX_OCT_PCI_IO_BASE,
|
|
CVMX_OCT_PCI_IO_BASE + CVMX_OCT_PCI_IO_SIZE);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
sc->sc_mem1.rm_type = RMAN_ARRAY;
|
|
error = rman_init(&sc->sc_mem1);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
error = rman_manage_region(&sc->sc_mem1, CVMX_OCT_PCI_MEM1_BASE,
|
|
CVMX_OCT_PCI_MEM1_BASE + CVMX_OCT_PCI_MEM1_SIZE);
|
|
if (error != 0)
|
|
return (error);
|
|
|
|
/*
|
|
* Next offsets for resource allocation in octopci_init_bar.
|
|
*/
|
|
sc->sc_io_next = 0;
|
|
sc->sc_mem1_next = 0;
|
|
|
|
/*
|
|
* Configure devices.
|
|
*/
|
|
octopci_write_config(dev, sc->sc_bus, 0, 0, PCIR_SUBBUS_1, 0xff, 1);
|
|
subbus = octopci_init_bus(dev, sc->sc_bus);
|
|
octopci_write_config(dev, sc->sc_bus, 0, 0, PCIR_SUBBUS_1, subbus, 1);
|
|
|
|
device_add_child(dev, "pci", device_get_unit(dev));
|
|
|
|
return (bus_generic_attach(dev));
|
|
}
|
|
|
|
static int
|
|
octopci_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
|
|
{
|
|
struct octopci_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
switch (which) {
|
|
case PCIB_IVAR_DOMAIN:
|
|
*result = sc->sc_domain;
|
|
return (0);
|
|
case PCIB_IVAR_BUS:
|
|
*result = sc->sc_bus;
|
|
return (0);
|
|
|
|
}
|
|
return (ENOENT);
|
|
}
|
|
|
|
static struct resource *
|
|
octopci_alloc_resource(device_t bus, device_t child, int type, int *rid,
|
|
u_long start, u_long end, u_long count, u_int flags)
|
|
{
|
|
struct octopci_softc *sc;
|
|
struct resource *res;
|
|
struct rman *rm;
|
|
int error;
|
|
|
|
sc = device_get_softc(bus);
|
|
|
|
switch (type) {
|
|
case SYS_RES_IRQ:
|
|
res = bus_generic_alloc_resource(bus, child, type, rid, start,
|
|
end, count, flags);
|
|
if (res != NULL)
|
|
return (res);
|
|
return (NULL);
|
|
case SYS_RES_MEMORY:
|
|
rm = &sc->sc_mem1;
|
|
break;
|
|
case SYS_RES_IOPORT:
|
|
rm = &sc->sc_io;
|
|
break;
|
|
default:
|
|
return (NULL);
|
|
}
|
|
|
|
res = rman_reserve_resource(rm, start, end, count, flags, child);
|
|
if (res == NULL)
|
|
return (NULL);
|
|
|
|
rman_set_rid(res, *rid);
|
|
rman_set_bustag(res, octopci_bus_space);
|
|
|
|
switch (type) {
|
|
case SYS_RES_MEMORY:
|
|
rman_set_bushandle(res, sc->sc_mem1_base + rman_get_start(res));
|
|
break;
|
|
case SYS_RES_IOPORT:
|
|
rman_set_bushandle(res, sc->sc_io_base + rman_get_start(res));
|
|
#if __mips_n64
|
|
rman_set_virtual(res, (void *)rman_get_bushandle(res));
|
|
#else
|
|
/*
|
|
* XXX
|
|
* We can't access ports via a 32-bit pointer.
|
|
*/
|
|
rman_set_virtual(res, NULL);
|
|
#endif
|
|
break;
|
|
}
|
|
|
|
if ((flags & RF_ACTIVE) != 0) {
|
|
error = bus_activate_resource(child, type, *rid, res);
|
|
if (error != 0) {
|
|
rman_release_resource(res);
|
|
return (NULL);
|
|
}
|
|
}
|
|
|
|
return (res);
|
|
}
|
|
|
|
static int
|
|
octopci_activate_resource(device_t bus, device_t child, int type, int rid,
|
|
struct resource *res)
|
|
{
|
|
bus_space_handle_t bh;
|
|
int error;
|
|
|
|
switch (type) {
|
|
case SYS_RES_IRQ:
|
|
error = bus_generic_activate_resource(bus, child, type, rid,
|
|
res);
|
|
if (error != 0)
|
|
return (error);
|
|
return (0);
|
|
case SYS_RES_MEMORY:
|
|
case SYS_RES_IOPORT:
|
|
error = bus_space_map(rman_get_bustag(res),
|
|
rman_get_bushandle(res), rman_get_size(res), 0, &bh);
|
|
if (error != 0)
|
|
return (error);
|
|
rman_set_bushandle(res, bh);
|
|
break;
|
|
default:
|
|
return (ENXIO);
|
|
}
|
|
|
|
error = rman_activate_resource(res);
|
|
if (error != 0)
|
|
return (error);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
octopci_maxslots(device_t dev)
|
|
{
|
|
return (PCI_SLOTMAX);
|
|
}
|
|
|
|
static uint32_t
|
|
octopci_read_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg,
|
|
int bytes)
|
|
{
|
|
struct octopci_softc *sc;
|
|
uint64_t addr;
|
|
uint32_t data;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
|
|
if (bus == 0 && slot == 0 && func == 0)
|
|
return ((uint32_t)-1);
|
|
|
|
switch (bytes) {
|
|
case 4:
|
|
return (cvmx_pcie_config_read32(sc->sc_domain, bus, slot, func, reg));
|
|
case 2:
|
|
return (cvmx_pcie_config_read16(sc->sc_domain, bus, slot, func, reg));
|
|
case 1:
|
|
return (cvmx_pcie_config_read8(sc->sc_domain, bus, slot, func, reg));
|
|
default:
|
|
return ((uint32_t)-1);
|
|
}
|
|
}
|
|
|
|
addr = octopci_cs_addr(bus, slot, func, reg);
|
|
|
|
switch (bytes) {
|
|
case 4:
|
|
data = le32toh(cvmx_read64_uint32(addr));
|
|
return (data);
|
|
case 2:
|
|
data = le16toh(cvmx_read64_uint16(addr));
|
|
return (data);
|
|
case 1:
|
|
data = cvmx_read64_uint8(addr);
|
|
return (data);
|
|
default:
|
|
return ((uint32_t)-1);
|
|
}
|
|
}
|
|
|
|
static void
|
|
octopci_write_config(device_t dev, u_int bus, u_int slot, u_int func,
|
|
u_int reg, uint32_t data, int bytes)
|
|
{
|
|
struct octopci_softc *sc;
|
|
uint64_t addr;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (octeon_has_feature(OCTEON_FEATURE_PCIE)) {
|
|
switch (bytes) {
|
|
case 4:
|
|
cvmx_pcie_config_write32(sc->sc_domain, bus, slot, func, reg, data);
|
|
return;
|
|
case 2:
|
|
cvmx_pcie_config_write16(sc->sc_domain, bus, slot, func, reg, data);
|
|
return;
|
|
case 1:
|
|
cvmx_pcie_config_write8(sc->sc_domain, bus, slot, func, reg, data);
|
|
return;
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
|
|
addr = octopci_cs_addr(bus, slot, func, reg);
|
|
|
|
switch (bytes) {
|
|
case 4:
|
|
cvmx_write64_uint32(addr, htole32(data));
|
|
return;
|
|
case 2:
|
|
cvmx_write64_uint16(addr, htole16(data));
|
|
return;
|
|
case 1:
|
|
cvmx_write64_uint8(addr, data);
|
|
return;
|
|
default:
|
|
return;
|
|
}
|
|
}
|
|
|
|
static int
|
|
octopci_route_interrupt(device_t dev, device_t child, int pin)
|
|
{
|
|
struct octopci_softc *sc;
|
|
unsigned bus, slot, func;
|
|
unsigned irq;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (octeon_has_feature(OCTEON_FEATURE_PCIE))
|
|
return (CVMX_IRQ_PCI_INT0 + pin - 1);
|
|
|
|
bus = pci_get_bus(child);
|
|
slot = pci_get_slot(child);
|
|
func = pci_get_function(child);
|
|
|
|
/*
|
|
* Board types we have to know at compile-time.
|
|
*/
|
|
#if defined(OCTEON_BOARD_CAPK_0100ND)
|
|
if (bus == 0 && slot == 12 && func == 0)
|
|
return (CVMX_IRQ_PCI_INT2);
|
|
#endif
|
|
|
|
/*
|
|
* For board types we can determine at runtime.
|
|
*/
|
|
switch (cvmx_sysinfo_get()->board_type) {
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
|
|
return (CVMX_IRQ_PCI_INT0 + pin - 1);
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR320:
|
|
if (slot < 32) {
|
|
if (slot == 3 || slot == 9)
|
|
irq = pin;
|
|
else
|
|
irq = pin - 1;
|
|
return (CVMX_IRQ_PCI_INT0 + (irq & 3));
|
|
}
|
|
break;
|
|
#endif
|
|
default:
|
|
break;
|
|
}
|
|
|
|
irq = slot + pin - 3;
|
|
|
|
return (CVMX_IRQ_PCI_INT0 + (irq & 3));
|
|
}
|
|
|
|
static unsigned
|
|
octopci_init_bar(device_t dev, unsigned b, unsigned s, unsigned f, unsigned barnum, uint8_t *commandp)
|
|
{
|
|
struct octopci_softc *sc;
|
|
uint64_t bar;
|
|
unsigned size;
|
|
int barsize;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
octopci_write_config(dev, b, s, f, PCIR_BAR(barnum), 0xffffffff, 4);
|
|
bar = octopci_read_config(dev, b, s, f, PCIR_BAR(barnum), 4);
|
|
|
|
if (bar == 0) {
|
|
/* Bar not implemented; got to next bar. */
|
|
return (barnum + 1);
|
|
}
|
|
|
|
if (PCI_BAR_IO(bar)) {
|
|
size = ~(bar & PCIM_BAR_IO_BASE) + 1;
|
|
|
|
sc->sc_io_next = (sc->sc_io_next + size - 1) & ~(size - 1);
|
|
if (sc->sc_io_next + size > CVMX_OCT_PCI_IO_SIZE) {
|
|
device_printf(dev, "%02x.%02x:%02x: no ports for BAR%u.\n",
|
|
b, s, f, barnum);
|
|
return (barnum + 1);
|
|
}
|
|
octopci_write_config(dev, b, s, f, PCIR_BAR(barnum),
|
|
CVMX_OCT_PCI_IO_BASE + sc->sc_io_next, 4);
|
|
sc->sc_io_next += size;
|
|
|
|
/*
|
|
* Enable I/O ports.
|
|
*/
|
|
*commandp |= PCIM_CMD_PORTEN;
|
|
|
|
return (barnum + 1);
|
|
} else {
|
|
if (PCIR_BAR(barnum) == PCIR_BIOS) {
|
|
/*
|
|
* ROM BAR is always 32-bit.
|
|
*/
|
|
barsize = 1;
|
|
} else {
|
|
switch (bar & PCIM_BAR_MEM_TYPE) {
|
|
case PCIM_BAR_MEM_64:
|
|
/*
|
|
* XXX
|
|
* High 32 bits are all zeroes for now.
|
|
*/
|
|
octopci_write_config(dev, b, s, f, PCIR_BAR(barnum + 1), 0, 4);
|
|
barsize = 2;
|
|
break;
|
|
default:
|
|
barsize = 1;
|
|
break;
|
|
}
|
|
}
|
|
|
|
size = ~(bar & (uint32_t)PCIM_BAR_MEM_BASE) + 1;
|
|
|
|
sc->sc_mem1_next = (sc->sc_mem1_next + size - 1) & ~(size - 1);
|
|
if (sc->sc_mem1_next + size > CVMX_OCT_PCI_MEM1_SIZE) {
|
|
device_printf(dev, "%02x.%02x:%02x: no memory for BAR%u.\n",
|
|
b, s, f, barnum);
|
|
return (barnum + barsize);
|
|
}
|
|
octopci_write_config(dev, b, s, f, PCIR_BAR(barnum),
|
|
CVMX_OCT_PCI_MEM1_BASE + sc->sc_mem1_next, 4);
|
|
sc->sc_mem1_next += size;
|
|
|
|
/*
|
|
* Enable memory access.
|
|
*/
|
|
*commandp |= PCIM_CMD_MEMEN;
|
|
|
|
return (barnum + barsize);
|
|
}
|
|
}
|
|
|
|
static unsigned
|
|
octopci_init_device(device_t dev, unsigned b, unsigned s, unsigned f, unsigned secbus)
|
|
{
|
|
unsigned barnum, bars;
|
|
uint8_t brctl;
|
|
uint8_t class, subclass;
|
|
uint8_t command;
|
|
uint8_t hdrtype;
|
|
|
|
/* Read header type (again.) */
|
|
hdrtype = octopci_read_config(dev, b, s, f, PCIR_HDRTYPE, 1);
|
|
|
|
/*
|
|
* Disable memory and I/O while programming BARs.
|
|
*/
|
|
command = octopci_read_config(dev, b, s, f, PCIR_COMMAND, 1);
|
|
command &= ~(PCIM_CMD_MEMEN | PCIM_CMD_PORTEN);
|
|
octopci_write_config(dev, b, s, f, PCIR_COMMAND, command, 1);
|
|
|
|
DELAY(10000);
|
|
|
|
/* Program BARs. */
|
|
switch (hdrtype & PCIM_HDRTYPE) {
|
|
case PCIM_HDRTYPE_NORMAL:
|
|
bars = 6;
|
|
break;
|
|
case PCIM_HDRTYPE_BRIDGE:
|
|
bars = 2;
|
|
break;
|
|
case PCIM_HDRTYPE_CARDBUS:
|
|
bars = 0;
|
|
break;
|
|
default:
|
|
device_printf(dev, "%02x.%02x:%02x: invalid header type %#x\n",
|
|
b, s, f, hdrtype);
|
|
return (secbus);
|
|
}
|
|
|
|
barnum = 0;
|
|
while (barnum < bars)
|
|
barnum = octopci_init_bar(dev, b, s, f, barnum, &command);
|
|
|
|
/* Enable bus mastering. */
|
|
command |= PCIM_CMD_BUSMASTEREN;
|
|
|
|
/* Enable whatever facilities the BARs require. */
|
|
octopci_write_config(dev, b, s, f, PCIR_COMMAND, command, 1);
|
|
|
|
DELAY(10000);
|
|
|
|
/*
|
|
* Set cache line size. On Octeon it should be 128 bytes,
|
|
* but according to Linux some Intel bridges have trouble
|
|
* with values over 64 bytes, so use 64 bytes.
|
|
*/
|
|
octopci_write_config(dev, b, s, f, PCIR_CACHELNSZ, 16, 1);
|
|
|
|
/* Set latency timer. */
|
|
octopci_write_config(dev, b, s, f, PCIR_LATTIMER, 48, 1);
|
|
|
|
/* Board-specific or device-specific fixups and workarounds. */
|
|
switch (cvmx_sysinfo_get()->board_type) {
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
|
|
if (b == 1 && s == 7 && f == 0) {
|
|
bus_addr_t busaddr, unitbusaddr;
|
|
uint32_t bar;
|
|
uint32_t tmp;
|
|
unsigned unit;
|
|
|
|
/*
|
|
* Set Tx DMA power.
|
|
*/
|
|
bar = octopci_read_config(dev, b, s, f,
|
|
PCIR_BAR(3), 4);
|
|
busaddr = CVMX_ADDR_DID(CVMX_FULL_DID(CVMX_OCT_DID_PCI,
|
|
CVMX_OCT_SUBDID_PCI_MEM1));
|
|
busaddr += (bar & (uint32_t)PCIM_BAR_MEM_BASE);
|
|
for (unit = 0; unit < 4; unit++) {
|
|
unitbusaddr = busaddr + 0x430 + (unit << 8);
|
|
tmp = le32toh(cvmx_read64_uint32(unitbusaddr));
|
|
tmp &= ~0x700;
|
|
tmp |= 0x300;
|
|
cvmx_write64_uint32(unitbusaddr, htole32(tmp));
|
|
}
|
|
}
|
|
break;
|
|
#endif
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Configure PCI-PCI bridges. */
|
|
class = octopci_read_config(dev, b, s, f, PCIR_CLASS, 1);
|
|
if (class != PCIC_BRIDGE)
|
|
return (secbus);
|
|
|
|
subclass = octopci_read_config(dev, b, s, f, PCIR_SUBCLASS, 1);
|
|
if (subclass != PCIS_BRIDGE_PCI)
|
|
return (secbus);
|
|
|
|
/* Enable memory and I/O access. */
|
|
command |= PCIM_CMD_MEMEN | PCIM_CMD_PORTEN;
|
|
octopci_write_config(dev, b, s, f, PCIR_COMMAND, command, 1);
|
|
|
|
/* Enable errors and parity checking. Do a bus reset. */
|
|
brctl = octopci_read_config(dev, b, s, f, PCIR_BRIDGECTL_1, 1);
|
|
brctl |= PCIB_BCR_PERR_ENABLE | PCIB_BCR_SERR_ENABLE;
|
|
|
|
/* Perform a secondary bus reset. */
|
|
brctl |= PCIB_BCR_SECBUS_RESET;
|
|
octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1);
|
|
DELAY(100000);
|
|
brctl &= ~PCIB_BCR_SECBUS_RESET;
|
|
octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1);
|
|
|
|
secbus++;
|
|
|
|
/* Program memory and I/O ranges. */
|
|
octopci_write_config(dev, b, s, f, PCIR_MEMBASE_1,
|
|
CVMX_OCT_PCI_MEM1_BASE >> 16, 2);
|
|
octopci_write_config(dev, b, s, f, PCIR_MEMLIMIT_1,
|
|
(CVMX_OCT_PCI_MEM1_BASE + CVMX_OCT_PCI_MEM1_SIZE - 1) >> 16, 2);
|
|
|
|
octopci_write_config(dev, b, s, f, PCIR_IOBASEL_1,
|
|
CVMX_OCT_PCI_IO_BASE >> 8, 1);
|
|
octopci_write_config(dev, b, s, f, PCIR_IOBASEH_1,
|
|
CVMX_OCT_PCI_IO_BASE >> 16, 2);
|
|
|
|
octopci_write_config(dev, b, s, f, PCIR_IOLIMITL_1,
|
|
(CVMX_OCT_PCI_IO_BASE + CVMX_OCT_PCI_IO_SIZE - 1) >> 8, 1);
|
|
octopci_write_config(dev, b, s, f, PCIR_IOLIMITH_1,
|
|
(CVMX_OCT_PCI_IO_BASE + CVMX_OCT_PCI_IO_SIZE - 1) >> 16, 2);
|
|
|
|
/* Program prefetchable memory decoder. */
|
|
/* XXX */
|
|
|
|
/* Probe secondary/subordinate buses. */
|
|
octopci_write_config(dev, b, s, f, PCIR_PRIBUS_1, b, 1);
|
|
octopci_write_config(dev, b, s, f, PCIR_SECBUS_1, secbus, 1);
|
|
octopci_write_config(dev, b, s, f, PCIR_SUBBUS_1, 0xff, 1);
|
|
|
|
/* Perform a secondary bus reset. */
|
|
brctl |= PCIB_BCR_SECBUS_RESET;
|
|
octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1);
|
|
DELAY(100000);
|
|
brctl &= ~PCIB_BCR_SECBUS_RESET;
|
|
octopci_write_config(dev, b, s, f, PCIR_BRIDGECTL_1, brctl, 1);
|
|
|
|
/* Give the bus time to settle now before reading configspace. */
|
|
DELAY(100000);
|
|
|
|
secbus = octopci_init_bus(dev, secbus);
|
|
|
|
octopci_write_config(dev, b, s, f, PCIR_SUBBUS_1, secbus, 1);
|
|
|
|
return (secbus);
|
|
}
|
|
|
|
static unsigned
|
|
octopci_init_bus(device_t dev, unsigned b)
|
|
{
|
|
unsigned s, f;
|
|
uint8_t hdrtype;
|
|
unsigned secbus;
|
|
|
|
secbus = b;
|
|
|
|
for (s = 0; s <= PCI_SLOTMAX; s++) {
|
|
for (f = 0; f <= PCI_FUNCMAX; f++) {
|
|
hdrtype = octopci_read_config(dev, b, s, f, PCIR_HDRTYPE, 1);
|
|
|
|
if (hdrtype == 0xff) {
|
|
if (f == 0)
|
|
break; /* Next slot. */
|
|
continue; /* Next function. */
|
|
}
|
|
|
|
secbus = octopci_init_device(dev, b, s, f, secbus);
|
|
|
|
if (f == 0 && (hdrtype & PCIM_MFDEV) == 0)
|
|
break; /* Next slot. */
|
|
}
|
|
}
|
|
|
|
return (secbus);
|
|
}
|
|
|
|
static uint64_t
|
|
octopci_cs_addr(unsigned bus, unsigned slot, unsigned func, unsigned reg)
|
|
{
|
|
octeon_pci_config_space_address_t pci_addr;
|
|
|
|
pci_addr.u64 = 0;
|
|
pci_addr.s.upper = 2;
|
|
pci_addr.s.io = 1;
|
|
pci_addr.s.did = 3;
|
|
pci_addr.s.subdid = CVMX_OCT_SUBDID_PCI_CFG;
|
|
pci_addr.s.endian_swap = 1;
|
|
pci_addr.s.bus = bus;
|
|
pci_addr.s.dev = slot;
|
|
pci_addr.s.func = func;
|
|
pci_addr.s.reg = reg;
|
|
|
|
return (pci_addr.u64);
|
|
}
|
|
|
|
static void
|
|
octopci_init_pci(device_t dev)
|
|
{
|
|
cvmx_npi_mem_access_subid_t npi_mem_access_subid;
|
|
cvmx_npi_pci_int_arb_cfg_t npi_pci_int_arb_cfg;
|
|
cvmx_npi_ctl_status_t npi_ctl_status;
|
|
cvmx_pci_ctl_status_2_t pci_ctl_status_2;
|
|
cvmx_pci_cfg56_t pci_cfg56;
|
|
cvmx_pci_cfg22_t pci_cfg22;
|
|
cvmx_pci_cfg16_t pci_cfg16;
|
|
cvmx_pci_cfg19_t pci_cfg19;
|
|
cvmx_pci_cfg01_t pci_cfg01;
|
|
unsigned i;
|
|
|
|
/*
|
|
* Reset the PCI bus.
|
|
*/
|
|
cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x1);
|
|
cvmx_read_csr(CVMX_CIU_SOFT_PRST);
|
|
|
|
DELAY(2000);
|
|
|
|
npi_ctl_status.u64 = 0;
|
|
npi_ctl_status.s.max_word = 1;
|
|
npi_ctl_status.s.timer = 1;
|
|
cvmx_write_csr(CVMX_NPI_CTL_STATUS, npi_ctl_status.u64);
|
|
|
|
/*
|
|
* Set host mode.
|
|
*/
|
|
switch (cvmx_sysinfo_get()->board_type) {
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR320:
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
|
|
/* 32-bit PCI-X */
|
|
cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x0);
|
|
break;
|
|
#endif
|
|
default:
|
|
/* 64-bit PCI-X */
|
|
cvmx_write_csr(CVMX_CIU_SOFT_PRST, 0x4);
|
|
break;
|
|
}
|
|
cvmx_read_csr(CVMX_CIU_SOFT_PRST);
|
|
|
|
DELAY(2000);
|
|
|
|
/*
|
|
* Enable BARs and configure big BAR mode.
|
|
*/
|
|
pci_ctl_status_2.u32 = 0;
|
|
pci_ctl_status_2.s.bb1_hole = 5; /* 256MB hole in BAR1 */
|
|
pci_ctl_status_2.s.bb1_siz = 1; /* BAR1 is 2GB */
|
|
pci_ctl_status_2.s.bb_ca = 1; /* Bypass cache for big BAR */
|
|
pci_ctl_status_2.s.bb_es = 1; /* Do big BAR byte-swapping */
|
|
pci_ctl_status_2.s.bb1 = 1; /* BAR1 is big */
|
|
pci_ctl_status_2.s.bb0 = 1; /* BAR0 is big */
|
|
pci_ctl_status_2.s.bar2pres = 1; /* BAR2 present */
|
|
pci_ctl_status_2.s.pmo_amod = 1; /* Round-robin priority */
|
|
pci_ctl_status_2.s.tsr_hwm = 1;
|
|
pci_ctl_status_2.s.bar2_enb = 1; /* Enable BAR2 */
|
|
pci_ctl_status_2.s.bar2_esx = 1; /* Do BAR2 byte-swapping */
|
|
pci_ctl_status_2.s.bar2_cax = 1; /* Bypass cache for BAR2 */
|
|
|
|
NPI_WRITE(CVMX_NPI_PCI_CTL_STATUS_2, pci_ctl_status_2.u32);
|
|
|
|
DELAY(2000);
|
|
|
|
pci_ctl_status_2.u32 = NPI_READ(CVMX_NPI_PCI_CTL_STATUS_2);
|
|
|
|
device_printf(dev, "%u-bit PCI%s bus.\n",
|
|
pci_ctl_status_2.s.ap_64ad ? 64 : 32,
|
|
pci_ctl_status_2.s.ap_pcix ? "-X" : "");
|
|
|
|
/*
|
|
* Set up transaction splitting, etc., parameters.
|
|
*/
|
|
pci_cfg19.u32 = 0;
|
|
pci_cfg19.s.mrbcm = 1;
|
|
if (pci_ctl_status_2.s.ap_pcix) {
|
|
pci_cfg19.s.mdrrmc = 0;
|
|
pci_cfg19.s.tdomc = 4;
|
|
} else {
|
|
pci_cfg19.s.mdrrmc = 2;
|
|
pci_cfg19.s.tdomc = 1;
|
|
}
|
|
NPI_WRITE(CVMX_NPI_PCI_CFG19, pci_cfg19.u32);
|
|
NPI_READ(CVMX_NPI_PCI_CFG19);
|
|
|
|
/*
|
|
* Set up PCI error handling and memory access.
|
|
*/
|
|
pci_cfg01.u32 = 0;
|
|
pci_cfg01.s.fbbe = 1;
|
|
pci_cfg01.s.see = 1;
|
|
pci_cfg01.s.pee = 1;
|
|
pci_cfg01.s.me = 1;
|
|
pci_cfg01.s.msae = 1;
|
|
if (pci_ctl_status_2.s.ap_pcix) {
|
|
pci_cfg01.s.fbb = 0;
|
|
} else {
|
|
pci_cfg01.s.fbb = 1;
|
|
}
|
|
NPI_WRITE(CVMX_NPI_PCI_CFG01, pci_cfg01.u32);
|
|
NPI_READ(CVMX_NPI_PCI_CFG01);
|
|
|
|
/*
|
|
* Enable the Octeon bus arbiter.
|
|
*/
|
|
npi_pci_int_arb_cfg.u64 = 0;
|
|
npi_pci_int_arb_cfg.s.en = 1;
|
|
cvmx_write_csr(CVMX_NPI_PCI_INT_ARB_CFG, npi_pci_int_arb_cfg.u64);
|
|
|
|
/*
|
|
* Disable master latency timer.
|
|
*/
|
|
pci_cfg16.u32 = 0;
|
|
pci_cfg16.s.mltd = 1;
|
|
NPI_WRITE(CVMX_NPI_PCI_CFG16, pci_cfg16.u32);
|
|
NPI_READ(CVMX_NPI_PCI_CFG16);
|
|
|
|
/*
|
|
* Configure master arbiter.
|
|
*/
|
|
pci_cfg22.u32 = 0;
|
|
pci_cfg22.s.flush = 1;
|
|
pci_cfg22.s.mrv = 255;
|
|
NPI_WRITE(CVMX_NPI_PCI_CFG22, pci_cfg22.u32);
|
|
NPI_READ(CVMX_NPI_PCI_CFG22);
|
|
|
|
/*
|
|
* Set up PCI-X capabilities.
|
|
*/
|
|
if (pci_ctl_status_2.s.ap_pcix) {
|
|
pci_cfg56.u32 = 0;
|
|
pci_cfg56.s.most = 3;
|
|
pci_cfg56.s.roe = 1; /* Enable relaxed ordering */
|
|
pci_cfg56.s.dpere = 1;
|
|
pci_cfg56.s.ncp = 0xe8;
|
|
pci_cfg56.s.pxcid = 7;
|
|
NPI_WRITE(CVMX_NPI_PCI_CFG56, pci_cfg56.u32);
|
|
NPI_READ(CVMX_NPI_PCI_CFG56);
|
|
}
|
|
|
|
NPI_WRITE(CVMX_NPI_PCI_READ_CMD_6, 0x22);
|
|
NPI_READ(CVMX_NPI_PCI_READ_CMD_6);
|
|
NPI_WRITE(CVMX_NPI_PCI_READ_CMD_C, 0x33);
|
|
NPI_READ(CVMX_NPI_PCI_READ_CMD_C);
|
|
NPI_WRITE(CVMX_NPI_PCI_READ_CMD_E, 0x33);
|
|
NPI_READ(CVMX_NPI_PCI_READ_CMD_E);
|
|
|
|
/*
|
|
* Configure MEM1 sub-DID access.
|
|
*/
|
|
npi_mem_access_subid.u64 = 0;
|
|
npi_mem_access_subid.s.esr = 1; /* Byte-swap on read */
|
|
npi_mem_access_subid.s.esw = 1; /* Byte-swap on write */
|
|
switch (cvmx_sysinfo_get()->board_type) {
|
|
#if defined(OCTEON_VENDOR_LANNER)
|
|
case CVMX_BOARD_TYPE_CUST_LANNER_MR955:
|
|
npi_mem_access_subid.s.shortl = 1;
|
|
break;
|
|
#endif
|
|
default:
|
|
break;
|
|
}
|
|
cvmx_write_csr(CVMX_NPI_MEM_ACCESS_SUBID3, npi_mem_access_subid.u64);
|
|
|
|
/*
|
|
* Configure BAR2. Linux says this has to come first.
|
|
*/
|
|
NPI_WRITE(CVMX_NPI_PCI_CFG08, 0x00000000);
|
|
NPI_READ(CVMX_NPI_PCI_CFG08);
|
|
NPI_WRITE(CVMX_NPI_PCI_CFG09, 0x00000080);
|
|
NPI_READ(CVMX_NPI_PCI_CFG09);
|
|
|
|
/*
|
|
* Disable BAR1 IndexX.
|
|
*/
|
|
for (i = 0; i < 32; i++) {
|
|
NPI_WRITE(CVMX_NPI_PCI_BAR1_INDEXX(i), 0);
|
|
NPI_READ(CVMX_NPI_PCI_BAR1_INDEXX(i));
|
|
}
|
|
|
|
/*
|
|
* Configure BAR0 and BAR1.
|
|
*/
|
|
NPI_WRITE(CVMX_NPI_PCI_CFG04, 0x00000000);
|
|
NPI_READ(CVMX_NPI_PCI_CFG04);
|
|
NPI_WRITE(CVMX_NPI_PCI_CFG05, 0x00000000);
|
|
NPI_READ(CVMX_NPI_PCI_CFG05);
|
|
|
|
NPI_WRITE(CVMX_NPI_PCI_CFG06, 0x80000000);
|
|
NPI_READ(CVMX_NPI_PCI_CFG06);
|
|
NPI_WRITE(CVMX_NPI_PCI_CFG07, 0x00000000);
|
|
NPI_READ(CVMX_NPI_PCI_CFG07);
|
|
|
|
/*
|
|
* Clear PCI interrupts.
|
|
*/
|
|
cvmx_write_csr(CVMX_NPI_PCI_INT_SUM2, 0xffffffffffffffffull);
|
|
}
|
|
|
|
static device_method_t octopci_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_identify, octopci_identify),
|
|
DEVMETHOD(device_probe, octopci_probe),
|
|
DEVMETHOD(device_attach, octopci_attach),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_read_ivar, octopci_read_ivar),
|
|
DEVMETHOD(bus_alloc_resource, octopci_alloc_resource),
|
|
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
|
|
DEVMETHOD(bus_activate_resource,octopci_activate_resource),
|
|
DEVMETHOD(bus_deactivate_resource,bus_generic_deactivate_resource),
|
|
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
|
|
|
|
DEVMETHOD(bus_add_child, bus_generic_add_child),
|
|
|
|
/* pcib interface */
|
|
DEVMETHOD(pcib_maxslots, octopci_maxslots),
|
|
DEVMETHOD(pcib_read_config, octopci_read_config),
|
|
DEVMETHOD(pcib_write_config, octopci_write_config),
|
|
DEVMETHOD(pcib_route_interrupt, octopci_route_interrupt),
|
|
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t octopci_driver = {
|
|
"pcib",
|
|
octopci_methods,
|
|
sizeof(struct octopci_softc),
|
|
};
|
|
static devclass_t octopci_devclass;
|
|
DRIVER_MODULE(octopci, ciu, octopci_driver, octopci_devclass, 0, 0);
|