freebsd-nq/sys/dev
Adrian Chadd 41059135ce [ath] [ath_hal] (etc, etc) - begin the task of re-modularising the HAL.
In the deep past, when this code compiled as a binary module, ath_hal
built as a module.  This allowed custom, smaller HAL modules to be built.
This was especially beneficial for small embedded platforms where you
didn't require /everything/ just to run.

However, sometime around the HAL opening fanfare, the HAL landed here
as one big driver+HAL thing, and a lot of the (dirty) infrastructure
(ie, #ifdef AH_SUPPORT_XXX) to build specific subsets of the HAL went away.
This was retained in sys/conf/files as "ath_hal_XXX" but it wasn't
really floated up to the modules themselves.

I'm now in a position where for the reaaaaaly embedded boards (both the
really old and the last couple generation of QCA MIPS boards) having a
cut down HAL module and driver loaded at runtime is /actually/ beneficial.

This reduces the kernel size down by quite a bit.  The MIPS modules look
like this:

adrian@gertrude:~/work/freebsd/head-embedded/src % ls -l ../root/mips_ap/boot/kernel.CARAMBOLA2/ath*ko
-r-xr-xr-x  1 adrian  adrian    5076 May 23 23:45 ../root/mips_ap/boot/kernel.CARAMBOLA2/ath_dfs.ko
-r-xr-xr-x  1 adrian  adrian  100588 May 23 23:45 ../root/mips_ap/boot/kernel.CARAMBOLA2/ath_hal.ko
-r-xr-xr-x  1 adrian  adrian  627324 May 23 23:45 ../root/mips_ap/boot/kernel.CARAMBOLA2/ath_hal_ar9300.ko
-r-xr-xr-x  1 adrian  adrian  314588 May 23 23:45 ../root/mips_ap/boot/kernel.CARAMBOLA2/ath_main.ko
-r-xr-xr-x  1 adrian  adrian   23472 May 23 23:45 ../root/mips_ap/boot/kernel.CARAMBOLA2/ath_rate.ko

And the x86 versions, like this:

root@gertrude:/home/adrian # ls -l /boot/kernel/ath*ko
-r-xr-xr-x  1 root  wheel   36632 May 24 18:32 /boot/kernel/ath_dfs.ko
-r-xr-xr-x  1 root  wheel  134440 May 24 18:32 /boot/kernel/ath_hal.ko
-r-xr-xr-x  1 root  wheel   82320 May 24 18:32 /boot/kernel/ath_hal_ar5210.ko
-r-xr-xr-x  1 root  wheel  104976 May 24 18:32 /boot/kernel/ath_hal_ar5211.ko
-r-xr-xr-x  1 root  wheel  236144 May 24 18:32 /boot/kernel/ath_hal_ar5212.ko
-r-xr-xr-x  1 root  wheel  336104 May 24 18:32 /boot/kernel/ath_hal_ar5416.ko
-r-xr-xr-x  1 root  wheel  598336 May 24 18:32 /boot/kernel/ath_hal_ar9300.ko
-r-xr-xr-x  1 root  wheel  406144 May 24 18:32 /boot/kernel/ath_main.ko
-r-xr-xr-x  1 root  wheel   55352 May 24 18:32 /boot/kernel/ath_rate.ko

.. so you can see, not building the whole HAL can save quite a bit.
For example, if you don't need AR9300 support, you can actually avoid
wasting half a megabyte of RAM.  On embedded routers this is quite a
big deal.

The AR9300 HAL can be later further shrunk because, hilariously,
it indeed supports AH_SUPPORT_<xxx> for optionally adding chipset support.
(I'll chase that down later as it's quite a big savings if you're only
building for a single embedded target.)

So:

* Create a very hackish way to load/unload HAL modules
* Create module metadata for each HAL subtype - ah_osdep_arXXXX.c
* Create module metadata for ath_rate and ath_dfs (bluetooth is
  currently just built as part of it)
* .. yes, this means we could actually build multiple rate control
  modules and pick one at load time, but I'd rather just glue this
  into net80211's rate control code.  Oh well, baby steps.
* Main driver is now "ath_main"
* Create an "if_ath" module that does what the ye olde one did -
  load PCI glue, main driver, HAL and all child modules.
  In this way, if you have "if_ath_load=YES" in /boot/modules.conf
  it will load everything the old way and stuff should still work.
* For module autoloading purposes, I actually /did/ fix up
  the name of the modules in if_ath_pci and if_ath_ahb.

If you want to selectively load things (eg on ye cheape ARM/MIPS platforms
where RAM is at a premium) you should:

* load ath_hal
* load the chip modules in question
* load ath_rate, ath_dfs
* load ath_main
* load if_ath_pci and/or if_ath_ahb depending upon your particular
  bus bind type - this is where probe/attach is done.

TODO:

* AR5312 module and associated pieces - yes, we have the SoC side support
  now so the wifi support would be good to "round things out";
* Just nuke AH_SUPPORT_AR5416 for now and always bloat the packet
  structures; this'll simplify other things.
* Should add a simple refcnt thing to the HAL RF/chip modules so you
  can't unload them whilst you're using them.
* Manpage updates, UPDATING if appropriate, etc.
2017-05-25 04:18:46 +00:00
..
aac Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name) 2017-01-04 20:26:42 +00:00
aacraid aacraid: rework r315083 for a clean build with and without AACRAID_DEBUG 2017-03-23 11:59:17 +00:00
acpi_support Hide unneeded message under bootverbose. 2017-01-27 14:17:48 +00:00
acpica hyperv/vmbus: Reorganize vmbus device tree 2017-05-10 05:28:14 +00:00
adb Force the setting of bit 7 in the sysmouse packet byte 1 to be unsigned. 2017-01-30 02:32:33 +00:00
adlink
advansys Remove dead mentions of CAM target mode APIs from drivers. 2017-02-19 17:27:58 +00:00
ae Fix a potentially forever loop. 2017-04-14 02:24:02 +00:00
age Remove dead code. 2017-04-14 08:27:42 +00:00
agp sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
aha Remove dead mentions of CAM target mode APIs from drivers. 2017-02-19 17:27:58 +00:00
ahci Check if the device is marked as dma-coherent in the FDT, and if so, let 2017-04-26 16:13:22 +00:00
aic Remove pc98 support completely. 2017-01-28 02:22:15 +00:00
aic7xxx Fix LUN enabling on wildcard target, as done by CTL. 2017-02-26 19:25:33 +00:00
al_eth sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
alc alc: Add Killer E2500 support 2017-01-16 03:03:47 +00:00
ale
alpm
altera Merge enhancements to the ALTERA Avalon bus generic device attachment 2017-01-28 13:25:06 +00:00
amd_ecc_inject add a module that provides support for DRAM ECC error injection on AMD CPUs 2017-03-03 22:51:04 +00:00
amdpm
amdsbwd the rest of changes intended to be committed in r306290 2016-09-24 07:59:54 +00:00
amdsmb
amdtemp
amr Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name) 2017-01-04 20:26:42 +00:00
an sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
arcmsr sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
asmc [asmc] Add support for MacBook Pro 11,2 2017-02-17 18:49:18 +00:00
ata Remove dead mentions of CAM target mode APIs from drivers. 2017-02-19 17:27:58 +00:00
ath [ath] [ath_hal] (etc, etc) - begin the task of re-modularising the HAL. 2017-05-25 04:18:46 +00:00
atkbdc Reduce synaptics touch sensitivity 2017-05-04 23:19:27 +00:00
auxio Consistently use device_t 2016-08-09 19:32:06 +00:00
axgbe Port the Linux AMX 10G network driver to FreeBSD as axgbe. It is unlikely 2017-02-15 13:56:04 +00:00
bce sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
beri sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
bfe Check m_getcl() return value. 2016-10-25 16:28:30 +00:00
bge
bhnd bhnd(4): Fix a SPROM identification regression introduced in r315866 2017-05-23 22:30:15 +00:00
bktr bktr(4): double assignment. 2017-02-23 16:18:57 +00:00
bm
bnxt Add version tag to the driver. 2017-05-16 18:05:34 +00:00
buslogic sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
bvm
bwi net80211 drivers: fix rate setup for EAPOL frames, obtain Tx parameters 2017-02-26 20:49:35 +00:00
bwn bwn(4): Fix trivial null dereference 2017-04-06 17:08:59 +00:00
bxe 1. state checks in bxe_tx_mq_start_locked() and bxe_tx_mq_start() to sync threads during interface down or detach. 2017-02-27 23:38:51 +00:00
cadence
cardbus
cas
ce dev/ce: double assignment. 2017-02-23 15:30:21 +00:00
cesa Enable proper configuration of CESA MBUS windows 2017-05-19 08:19:39 +00:00
cfe Sync CFE interface with upstream cfe-1.4.2 release. 2016-08-01 16:26:08 +00:00
cfi [cfi] fix CFI flash reset command for MX29LV320T/B. 2017-05-06 05:52:01 +00:00
chromebook_platform chromebook_platform: catch up with ig4iic -> ig4iic_pci in r310621 2017-02-25 15:55:46 +00:00
ciss In the same vein as r311350, fix whitespace in handling of XPT_PATH_INQ in 2017-01-05 03:08:57 +00:00
cm sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
cmx
coretemp
cp sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
cpuctl Update the list of cpudev ioctls which require write access. 2017-03-19 21:25:27 +00:00
cpufreq Add generic device-tree cpufreq driver. 2016-09-06 20:43:26 +00:00
cs Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
ctau sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
cx sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
cxgb Add some ntohl() love to r315277 2017-03-14 20:57:54 +00:00
cxgbe cxgbe/iw_cxgbe: sodisconnect failures are harmless and should not be 2017-05-24 04:48:09 +00:00
cy Revert r317446 and bring back cy(4). 2017-04-27 16:14:32 +00:00
cyapa add iic interface to ig4 driver, move isl and cyapa to iicbus 2016-10-30 12:15:33 +00:00
dc
dcons
de sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
dme Remove outdated comment. 2016-11-17 14:43:13 +00:00
dpaa Use UMA_ALIGN_PTR to specify pointer alignment 2017-05-12 04:10:02 +00:00
dpms
dpt Remove EISA support from dpt. Remove known EISA models from 2017-02-16 21:57:13 +00:00
drm All these files need sys/vmmeter.h, but now they got it implicitly 2017-04-17 17:07:00 +00:00
drm2 Don't bother enqueuing a page immediately before freeing it. 2017-05-18 18:37:19 +00:00
dwc
e1000 e1000api: misleading-indentation 2017-05-15 16:53:02 +00:00
ed sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
efidev Do not try to create /dev/efi device node before devfs is initialized. 2016-10-16 06:07:43 +00:00
ena Add support for Amazon Elastic Network Adapter (ENA) NIC 2017-05-22 14:46:13 +00:00
ep Remove EISA support for ep driver. Left in place EISA strings that are 2017-02-16 21:56:51 +00:00
esp Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name) 2017-01-04 20:26:42 +00:00
et
etherswitch [arswitch] add phy debugging to the internal PHY read/write functions. 2017-05-23 03:48:42 +00:00
evdev [evdev] Fix Right Alt and Keypad Enter event codes for atkbd(4) and kbdmux(4) drivers 2017-03-12 19:28:44 +00:00
ex remove archaic register keyword from ixgb and ex 2017-04-06 17:16:41 +00:00
exca Remove pc98 support completely. 2017-01-28 02:22:15 +00:00
extres Export a sysctl dev.<clkdom>.<unit>.clocks for each clock domain containing 2017-03-05 07:13:29 +00:00
fb Write-combine framebuffer writes through user-space mappings, if possible. 2017-04-20 15:18:15 +00:00
fdc Renumber copyright clause 4 2017-02-28 23:42:47 +00:00
fdt Set the correct default for #address-cells variable when the property does 2017-04-30 07:31:48 +00:00
fe sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
ffec Add imx6ul SoC support, and get the PHY number from the FDT data. If there 2017-04-16 03:49:14 +00:00
filemon Avoid taking PROC_LOCK in syscalls if not being traced. 2016-08-12 16:05:53 +00:00
firewire firewire/sbp: try to improve locking, plus a few style nits 2017-03-07 16:07:52 +00:00
flash [mx25l] add new device ids. 2017-05-06 06:08:44 +00:00
fxp Remove unnecessary comparison. 2017-04-14 02:33:26 +00:00
gem
glxiic
glxsb
gpio [gpioths] new driver for temperature/humidity sensor DHT11 2017-01-16 15:36:36 +00:00
gxemul gxemul: 2017-02-06 11:37:20 +00:00
hdmi Add support for audio on I2S based DesignWare HDMI controllers. 2016-12-29 14:08:24 +00:00
hifn
hme
hpt27xx Clean redundant MIN/MAX declarations in some HighPoint drivers. 2017-02-10 15:18:41 +00:00
hptiop sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
hptmv sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
hptnr Clean redundant MIN/MAX declarations in some HighPoint drivers. 2017-02-10 15:18:41 +00:00
hptrr Clean redundant MIN/MAX declarations in some HighPoint drivers. 2017-02-10 15:18:41 +00:00
hwpmc Fix arm stack frame walking support: 2017-03-14 16:06:57 +00:00
hyperv hyperv/vmbus: Reorganize vmbus device tree 2017-05-10 05:28:14 +00:00
ic Renumber copyright clause 4 2017-02-28 23:42:47 +00:00
ichiic [ig4] Add ACPI platform support for ig4 driver 2016-12-26 22:13:43 +00:00
ichsmb Add IDs for several missing Intel SMBus controllers. 2017-04-02 11:36:25 +00:00
ichwd Fixed TCO v3 tick convert 2017-03-01 05:18:43 +00:00
ida Remove support for EISA in the ida driver. Remove references to 2017-02-16 21:56:57 +00:00
if_ndis Fix regression in ndis(4) after r286410. This adds a bunch of checks for 2017-05-22 20:00:01 +00:00
iicbus sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
iir Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name) 2017-01-04 20:26:42 +00:00
intel [intelspi] Add SPI driver for Intel BayTrail SoC 2016-12-27 22:37:24 +00:00
intpm intpm: clean up intsmb_bread and intsmb_pcall 2016-11-11 15:08:12 +00:00
io
ioat ioat: don't specify inline for function with variable argument list 2017-03-04 12:51:57 +00:00
ipmi
ips
ipw
isci scif_sas_controller: Fix inverted logic range check 2017-03-13 17:58:08 +00:00
iscsi Inline some trivial wrapper functions. 2017-03-02 16:14:15 +00:00
iscsi_initiator Use getsock_cap() instead of deprecated fgetsock(). 2017-01-13 18:36:46 +00:00
iser Make the iSCSI parameter negotiation more flexible. 2016-08-25 05:22:53 +00:00
isl add iic interface to ig4 driver, move isl and cyapa to iicbus 2016-10-30 12:15:33 +00:00
ismt
isp Correct loop mode CRN resets to adhere to FCP-4 section 4.10 2017-05-03 13:17:01 +00:00
ispfw
iwi iwi, ral, zyd: fix possible use-after-free. 2017-02-17 23:20:22 +00:00
iwm [iwm] Recognize IWM_FW_PAGING_BLOCK_CMD wide cmd response correctly. 2017-05-12 06:35:20 +00:00
iwn iwn: use correct mask for queue ids (0xf -> 0x1f). 2017-04-02 13:24:58 +00:00
ixgb Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
ixgbe Don't overrite vf->flags variable at the end of ixgbe(4) ixgbe_add_vf(). 2017-04-05 22:01:49 +00:00
ixl ixl(4): Update to 1.7.12-k 2017-02-10 01:04:11 +00:00
jedec_ts jedec_ts: fix slave address check 2017-02-21 12:24:31 +00:00
jme Don't overwrite mapped bits. 2017-04-14 08:11:50 +00:00
joy
kbd Remove pc98 support completely. 2017-01-28 02:22:15 +00:00
kbdmux [evdev] Add evdev support to kbdmux(4) driver 2016-11-15 04:12:19 +00:00
ksyms
le sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
led
lge Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
lmc lmc(4): fix the build without the bpf device 2016-10-01 22:21:10 +00:00
malo
mbox
mc146818
md Renumber copyright clause 4 2017-02-28 23:42:47 +00:00
mdio
mem
mfi Always null-terminate ccb_pathinq.(sim_vid|hba_vid|dev_name) 2017-01-04 20:26:42 +00:00
mge
mii Add support for the Micrel KSZ8081 ethernet PHY. 2017-04-16 01:40:17 +00:00
mk48txx
mlx Remove references to EISA support in mlx. The driver never supported 2017-02-16 21:56:32 +00:00
mlx4 mlx4: Use the CQ quota for SRIOV when creating completion EQs 2017-05-19 12:22:48 +00:00
mlx5 Improve sysadmin visibility of physical port error counters in the 2017-04-28 19:38:57 +00:00
mly In the same vein as r311350, fix whitespace in handling of XPT_PATH_INQ in 2017-01-05 03:08:57 +00:00
mmc o Add support for eMMC DDR bus speed mode at 52 MHz to sdhci(4) and 2017-03-19 23:27:17 +00:00
mn
mpr Fix powerpc compiler error. 2017-05-22 20:27:29 +00:00
mps Improve error messages during command timeout for the mpr and mps 2017-05-11 15:19:04 +00:00
mpt Partially fix target task management requests handling. 2017-03-11 14:25:14 +00:00
mrsas Fix a typo introduced in r306024. 2017-01-23 21:09:27 +00:00
mse Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
msk Remove unnecessary assignment. 2017-04-14 07:27:23 +00:00
mvs Remove dead mentions of CAM target mode APIs from drivers. 2017-02-19 17:27:58 +00:00
mwl [net80211] RX parameter shuffle in net80211 in preparation for 4x4 NICs and 160MHz channels. 2017-02-20 02:08:08 +00:00
mxge
my Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
nand The nandsim(4) simulator driver doesn't have any protection against 2017-05-04 20:42:31 +00:00
ncr sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
nctgpio
ncv
netfpga10g/nf10bmac
netmap sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
nfe
nfsmb
nge
nmdm Renumber copyright clause 4 2017-02-28 23:42:47 +00:00
nsp
ntb Report NTB link speed to console and interface. 2017-04-23 14:25:51 +00:00
null Add support for encrypted kernel crash dumps. 2016-12-10 16:20:39 +00:00
nvd Report random flash storage as non-rotating to GEOM_DISK. 2017-01-12 08:53:10 +00:00
nvme Avoid dereferencing unintialized elements in the error path. 2017-03-07 23:06:41 +00:00
nvram
nvram2env
nxge
oce Update oce to version 11.0.50.0 2016-09-22 22:51:11 +00:00
ofw Update comment ot reflect realilty, we know also take care of CPUs that 2017-04-20 15:06:16 +00:00
otus net80211 drivers: fix rate setup for EAPOL frames, obtain Tx parameters 2017-02-26 20:49:35 +00:00
ow ow_temp: Update the temperature visible via the sysctl atomically, rather 2016-12-22 00:09:53 +00:00
pbio
pccard sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
pccbb Remove pc98 support completely. 2017-01-28 02:22:15 +00:00
pcf
pci Various fixes for PCI _OSC handling so HotPlug works again. 2017-04-27 16:32:42 +00:00
pcn Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
pdq Remove EISA attachment (fea) from pdq driver. Remove vestiges of 2017-02-16 21:57:08 +00:00
pms sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
powermac_nvram
ppbus Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
ppc Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
proto
psci Call the PSCI reset from cpu_reset on arm64. When rebooting from DDB the 2017-04-24 11:06:10 +00:00
pst
pty
puc Fix device delete child function. 2016-10-17 10:20:38 +00:00
qlnx/qlnxe Check for IPV6 TCP/UDP CSUM offload in pkt header during transmits. 2017-05-22 19:57:28 +00:00
qlxgb Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
qlxgbe Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
qlxge Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
quicc
ral net80211 drivers: fix rate setup for EAPOL frames, obtain Tx parameters 2017-02-26 20:49:35 +00:00
random Replace the RC4 algorithm for generating in-kernel secure random 2017-04-16 09:11:02 +00:00
rc
rccgpio Fix rcc_gpio_modify_bits(). Obviously (1 << 0) is not the same as 0. 2016-12-31 02:23:15 +00:00
re Disable CLKREQ for ASPM since re(4) doesn't implement link level power saving. 2016-10-27 02:20:13 +00:00
rl Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
rndtest
rp
rt [mips] [rt2880] Add oldest Ralink MIPS SOC RT2880 support code. 2017-05-06 06:20:34 +00:00
rtwn rtwn: remove out-of-bounds access + fix debug output. 2017-04-12 07:21:54 +00:00
safe
sbni sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
scc
sdhci Add the Marvell SDHCI controller to the list of supported devices in 2017-05-16 05:10:15 +00:00
sec
sf
sfxge sfxge(4): compact the first hot part of RxQ control 2017-01-27 11:59:02 +00:00
sge
siba
siis Remove dead mentions of CAM target mode APIs from drivers. 2017-02-19 17:27:58 +00:00
sio Renumber copyright clause 4 2017-02-28 23:42:47 +00:00
sis
sk
smbus smb: fix SMB_READB, SMB_READW, SMB_PCALL to work as documented 2016-11-11 14:41:02 +00:00
smc
sn sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
snp Commit the 64-bit inode project. 2017-05-23 09:29:05 +00:00
sound Increase the allowed maximum number of audio channels from 31 to 127 2017-05-24 21:42:48 +00:00
speaker Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
spibus [spigen] make spigen device ready to be compiled as a module 2017-03-09 01:00:27 +00:00
ste
stg
stge
sym sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
syscons Change the drawing method for the mouse cursor in planar mode to support 2017-04-23 08:59:35 +00:00
tdfx
terasic
ti
tl Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
tpm Remove dead code. 2017-04-06 22:21:49 +00:00
trm Remove dead mentions of CAM target mode APIs from drivers. 2017-02-19 17:27:58 +00:00
tsec Don't calltsec_receive_intr_locked() from the error interrupt handler. 2017-04-04 02:55:55 +00:00
twa Update tw_cl_share.h to allow 255 LUNs 2017-03-01 04:40:57 +00:00
twe
tws Increase the number of LUNs this hardware can support. 2017-05-17 13:22:13 +00:00
tx
txp Remove unnecessary check aginst NULL. txp_ext_command() with 2017-04-14 03:23:03 +00:00
uart Fix typo in r317659. 2017-05-03 16:34:03 +00:00
ubsec
usb Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
vge
viapm
viawd
videomode
virtio vtnet: don't update VLAN filter when parent is not running 2017-02-13 21:44:29 +00:00
vkbd
vmware/vmxnet3 Spell VMXNET3_LEGACY_TX correctly. 2017-02-18 06:18:14 +00:00
vnic Rework BGX detection to support both new and old firmware 2017-03-31 18:04:34 +00:00
vr
vt - Revert r317171. [1] 2017-05-15 23:12:04 +00:00
vte
vx sys/dev: Replace zero with NULL for pointers. 2017-02-20 03:43:12 +00:00
vxge vxge(4): Yet another (minor) mismatch. 2017-02-23 18:56:31 +00:00
watchdog Some cosmetic polishing for pre-timeouts. 2017-04-20 09:01:31 +00:00
wb Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00
wbwd
wi Fix unreachable code in wi_pci_resume(). 2017-03-15 09:31:58 +00:00
wpi net80211 drivers: fix rate setup for EAPOL frames, obtain Tx parameters 2017-02-26 20:49:35 +00:00
wtap
xdma Add parenthesis. 2016-12-30 16:26:54 +00:00
xe
xen xen/netfront: don't drop the RX lock in xn_rxeof 2017-05-22 11:33:44 +00:00
xilinx ofw_spi: Parse property for the SPI mode and CS polarity. 2016-12-18 14:54:20 +00:00
xl Remove register keyword from sys/ and ANSIfy prototypes 2017-05-17 00:34:34 +00:00