freebsd-nq/sys/dev/cxgbe
Navdeep Parhar 96807c23ce cxgbe(4): Update T5 and T4 firmwares to 1.15.37.0.
These firmwares were obtained from the "Chelsio T5/T4 Unified Wire
v2.12.0.3 for Linux" release.  Changes since 1.14.4.0 (which is the
firmware in -STABLE branches) are in the "Release Notes" accompanying
the Unified Wire release and are copy-pasted here as well.

22.1. T5 Firmware
+++++++++++++++++++++++++++++++++

Version : 1.15.37.0
Date    : 04/27/2016
================================================================================

FIXES
-----

BASE:
 - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where the default ingress
   queue was ignored.
 - Fixed an issue where adapter failed to load fw by adjusting DRAM frequency.
 - Fixed an issue in watchdog which was causing VM bring-up failure after reboot.
 - Fixed 40G link failures with some switches when auto-negotiation enabled.
 - Fixed to improve on link bring-up time.
 - Per port buffer groups size doubled to improve performance.
 - Fixed an issue where bogus d3hot bits were set causing traffic stall.
 - Fixed an issue where sometimes adapter was not seen after reboot.
 - Fixed an issue where iWARP was crashing in conjunction with traffic management.
 - Fixed an issue where link failed to come up after removing twinax cable and
   inserting optical module.

ETH
 - Fixed a link flap issue on T580-CR.

OFLD
 - Fixed a potential iSCSI data corruption issue by disabling RxFragEn flag.

FOiSCSI
 - Fixed an issue in recovery path where connection was getting closed before
   recovery processing was done.
 - Fixed an issue in TCP port reuse.
 - Fixed an issue in recovery path when large number (>64) of iSCSI connections
   were in use.
 - Returned ENETUNREACH if IP was not been provisioned yet and driver tried to
   use given inerface.
 - Fixed an issue where fw was sending ENETUNREACH event for normal tcp
   disconnection.

DCBX
 - Fixed an issue where iscsi tlv is sent incorrectly to host. (DCBX CEE)
 - Fixed an issue where apply bit set for APP id was affecting the ETS and PFC
  settings.(DCBX IEEE)
 - Fixed an issue where app priority values are not handled correctly in fw.
  (DCBX IEEE)
 - Fixed an issue where enable/disable dcbx can cause crash. (DCBX CEE,DCBX IEEE)

FOFCoE
 - Removed BB6 support.

ENHANCEMENTS
------------

BASE:
 - Added new interface to program DCA settings in SGE contexts; allow 32-byte
   IQE size
 - Added PTP interface fw_ptp_ts to support PTP Frequeny and Offset adjustment.
 - Added MPS raw interface.

ETH:
 - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.

OFLD:
 - WR opcode is returned to host in cqe error response.

22.2. T4 Firmware
+++++++++++++++++

Version : 1.15.37.0
Date    : 04/27/2016
================================================================================

FIXES
-----

BASE:
 - Fixed an issue in FW_RSS_VI_CONFIG_CMD handling where default ingress queue
   was ignored.
 - Fixed an issue in watchdog which was causing VM bring-up failure after reboot.
 - Per port buffer groups size doubled to improve performance.
 - Fixed an issue where iWARP was crashing in conjunction with traffic management.

FOiSCSI:
 - Fixed an issue in recovery path where connection was getting closed before
   recovery processing was done.
 - Fixed an issue in TCP port reuse.
 - Fixed an issue in recovery path when large number (>64) of iSCSI connections
   were in use.
 - Returned ENETUNREACH if IP had not been provisioned yet and driver tried to
   use given inerface.

DCBX
 - Fixed an issue where iscsi tlv is sent incorrectly to host.(DCBX CEE)
 - Fixed an issue where enable/disable dcbx can cause crash in firmware.(DCBX CEE)

FOiSCSI
 - Fixes an issue where fw was sending ENETUNREACH event for normal tcp
   disconnection.

FOFCoE
 - Removed BB6 support.

ENHANCEMENTS
------------

BASE:
 - Added MPS raw interface.

ETH:
 - New mailbox command FW_DCB_IEEE_CMD api added for IEEE dcbx.
================================================================================

Obtained from:	Chelsio Communications
MFC after:	6 weeks
Relnotes:	yes
Sponsored by:	Chelsio Communications
2016-05-13 17:38:59 +00:00
..
common sys/dev: minor spelling fixes. 2016-05-03 03:41:25 +00:00
cxgbei sys/dev: minor spelling fixes. 2016-05-03 03:41:25 +00:00
firmware cxgbe(4): Update T5 and T4 firmwares to 1.15.37.0. 2016-05-13 17:38:59 +00:00
iw_cxgbe The idr_for_each() function is now part of the LinuxKPI. Use the 2016-05-11 17:17:48 +00:00
tom Use DDP to implement zerocopy TCP receive with aio_read(). 2016-05-07 00:33:35 +00:00
adapter.h sys/dev: minor spelling fixes. 2016-05-03 03:41:25 +00:00
if_cxl.c cxgbe(4): Add a minimal if_cxl module that pulls in the real driver as 2015-02-06 01:10:04 +00:00
offload.h Use DDP to implement zerocopy TCP receive with aio_read(). 2016-05-07 00:33:35 +00:00
osdep.h cxgbe(4): Remove __devinit and SPEED_<foo> as part of catch up with 2016-03-08 08:13:37 +00:00
t4_ioctl.h sys/dev: minor spelling fixes. 2016-05-03 03:41:25 +00:00
t4_l2t.c sys/dev: minor spelling fixes. 2016-05-03 03:41:25 +00:00
t4_l2t.h
t4_main.c Use DDP to implement zerocopy TCP receive with aio_read(). 2016-05-07 00:33:35 +00:00
t4_mp_ring.c sys/dev: minor spelling fixes. 2016-05-03 03:41:25 +00:00
t4_mp_ring.h cxgbe(4): major tx rework. 2014-12-31 23:19:16 +00:00
t4_netmap.c sys: Make use of our rounddown() macro when sys/param.h is available. 2016-04-30 14:41:18 +00:00
t4_sge.c sys/dev: minor spelling fixes. 2016-05-03 03:41:25 +00:00
t4_tracer.c cxgbe(4): Remove stray if_up from the code that creates the tracing ifnet. 2014-05-23 01:45:44 +00:00