Pyun YongHyeon f8e0f10069 Restore link state handling which was broken in rev 1.69. ... Also report current link state while auto-negotiation is in progress. With this change link loss should be reported within a second and drivers that rely on link state should work. Reported by: Pete French < petefrench at ticketswitch dot com > Tested by: Pete French < petefrench at ticketswitch dot com > MFC after: 1 week		2008-08-12 00:57:39 +00:00
..
acphy.c	Set MIIF_HAVE_FIBER and add IFM_100_FX media when the AC_MCTL_FX_SEL	2007-01-12 22:59:38 +00:00
acphyreg.h	- Correct the AC_MCTL_BYP_PCS constant.	2007-01-12 22:58:04 +00:00
amphy.c	Fix a typo in a comment.	2008-01-27 01:11:57 +00:00
amphyreg.h
atphy.c	Add Attansic/Atheros F1 PHY driver.	2008-05-19 01:12:10 +00:00
atphyreg.h	Add Attansic/Atheros F1 PHY driver.	2008-05-19 01:12:10 +00:00
bmtphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
bmtphyreg.h
brgphy.c	Restore link state handling which was broken in rev 1.69.	2008-08-12 00:57:39 +00:00
brgphyreg.h	Add support for the BCM5906[M] adapters. These adapters only support	2008-04-29 19:47:13 +00:00
ciphy.c	Recognize Cicada CS8244 phy chip (among others, can be found on MPC8572DS	2008-04-26 18:07:24 +00:00
ciphyreg.h	Add support Vitesse VSC8601 PHY that is found on nVidia network	2007-06-06 06:55:49 +00:00
e1000phy.c	Reset autonegotation timer if media option is not IFM_AUTO.	2007-11-16 10:39:18 +00:00
e1000phyreg.h	Add 88E1116/88E1116R PHY support code that takes the PHY out of	2007-10-29 05:50:22 +00:00
exphy.c	- Take advantage of mii_phy_dev_probe().	2007-01-12 23:17:43 +00:00
gentbi.c	- Remove MIIF_NOISOLATE; there's generally no reason to let gentbi(4)	2007-10-29 21:11:55 +00:00
icsphy.c	Add icsphy(4), Integrated Circuit Systems PHY driver, ported from	2007-06-11 02:04:50 +00:00
icsphyreg.h	Add icsphy(4), Integrated Circuit Systems PHY driver, ported from	2007-06-11 02:04:50 +00:00
inphy.c	Use mii_phy_add_media()/mii_phy_setmedia()-compatible media table	2007-01-12 22:27:46 +00:00
inphyreg.h
ip1000phy.c	Add support for IC Plus IP1001 PHY.	2008-04-05 00:52:07 +00:00
ip1000phyreg.h	Add support for IC Plus IP1001 PHY.	2008-04-05 00:52:07 +00:00
jmphy.c	Add JMicron JMP202/JMP211 PHY driver.	2008-05-27 01:16:40 +00:00
jmphyreg.h	Add JMicron JMP202/JMP211 PHY driver.	2008-05-27 01:16:40 +00:00
lxtphy.c	Add support for the Apple Big Mac (BMAC) Ethernet controller,	2008-06-07 22:58:32 +00:00
lxtphyreg.h
mii_physubr.c	Remove mii_media_from_bmcr(); all previous users have been converted to	2007-01-13 00:14:45 +00:00
mii.c	Define the miibus ivars as a structure, instead of as a vector of	2007-05-01 18:21:24 +00:00
mii.h
miibus_if.m
miidevs	Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit	2008-06-20 19:28:33 +00:00
miivar.h	Remove mii_media_from_bmcr(); all previous users have been converted to	2007-01-13 00:14:45 +00:00
mlphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
nsgphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
nsgphyreg.h
nsphy.c	- Fix a typo in a comment.	2008-01-27 01:30:02 +00:00
nsphyreg.h
nsphyter.c	Add a driver for the National Semiconductor DP83815, DP83843 and	2008-01-27 01:10:41 +00:00
nsphyterreg.h	Add a driver for the National Semiconductor DP83815, DP83843 and	2008-01-27 01:10:41 +00:00
pnaphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
qsphy.c	Add a helper function mii_phy_dev_probe(), which wraps around the	2006-12-02 15:32:34 +00:00
qsphyreg.h
rgephy.c	Fix a copy/paste error	2008-08-06 07:52:59 +00:00
rgephyreg.h	Add RTL8211C(L) support.	2008-07-02 08:10:18 +00:00
rlphy.c	IEEE 802.3 Annex 28B.3 explicitly specifies the following relative	2007-11-16 10:25:36 +00:00
rlswitch.c	MFp4: add basic driver for RTL8305SC switch in PHY emulation	2007-01-05 01:46:26 +00:00
ruephy.c	- Take advantage of mii_phy_dev_probe() and mii_phy_setmedia().	2007-01-13 00:06:41 +00:00
ruephyreg.h
smcphy.c	This is a rewritten driver for the SMSC LAN91C111. It's based in part on the	2008-06-06 05:00:49 +00:00
tdkphy.c	IEEE 802.3 Annex 28B.3 explicitly specifies the following relative	2007-11-16 10:25:36 +00:00
tdkphyreg.h
tlphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
tlphyreg.h
truephy.c	Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit	2008-06-20 19:30:44 +00:00
truephyreg.h	Add et(4), a port of DragonFly's Agere ET1310 10/100/Gigabit	2008-06-20 19:30:44 +00:00
ukphy_subr.c	IEEE 802.3 Annex 28B.3 explicitly specifies the following relative	2007-11-16 10:25:36 +00:00
ukphy.c	- Don't set MIIF_NOISOLATE so ukphy(4) can be used in configurations with	2007-01-20 00:52:29 +00:00
xmphy.c	Some style changes to a couple of PHY drivers:	2006-12-02 19:36:25 +00:00
xmphyreg.h