d/freebsd-nq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
freebsd-nq/sys/dev/ath
History
Adrian Chadd 70bd9518f1 Bump the valid GPIO range for rfkill up from 8 to 16. 
AR5416 and later NICs have more than 8 (Well, more than 6) GPIO pins.
So to support rfkill on these NICs we need to bump this up or the
rfkill GPIO pin may get reset to the wrong value.

Noticed by: Anthony Jenkins <scoobi_doo@yahoo.com>
2014-12-23 18:48:45 +00:00
..
ath_dfs/null
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
2013-10-26 17:58:36 +00:00
ath_hal
Fix the following -Werror warning from clang 3.5.0, while building the
2014-11-23 18:31:55 +00:00
ath_rate
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
2013-10-26 17:58:36 +00:00
ah_osdep.c
Pull in r267961 and r267973 again. Fix for issues reported will follow.
2014-06-28 03:56:17 +00:00
ah_osdep.h
…
if_ath_ahb.c
Remove ia64.
2014-07-07 00:27:09 +00:00
if_ath_alq.c
Support sending ATH_ALQ messages with no payload.
2013-05-13 21:17:27 +00:00
if_ath_alq.h
Add ALQ beacon debugging.
2013-05-13 21:18:00 +00:00
if_ath_beacon.c
Shut down RX before TX - in theory, this should make the chip less likely
2014-08-23 18:55:51 +00:00
if_ath_beacon.h
Bring over some initial power save management support, reset path
2014-04-30 02:19:41 +00:00
if_ath_btcoex.c
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
2013-10-26 17:58:36 +00:00
if_ath_btcoex.h
Bring over the initial static bluetooth coexistence configuration
2013-06-07 09:02:02 +00:00
if_ath_debug.c
Pull in r267961 and r267973 again. Fix for issues reported will follow.
2014-06-28 03:56:17 +00:00
if_ath_debug.h
Bring over some initial power save management support, reset path
2014-04-30 02:19:41 +00:00
if_ath_keycache.c
Bring over some initial power save management support, reset path
2014-04-30 02:19:41 +00:00
if_ath_keycache.h
…
if_ath_led.c
Bring over some initial power save management support, reset path
2014-04-30 02:19:41 +00:00
if_ath_led.h
…
if_ath_lna_div.c
Add initial support for the AR9485 CUS198 / CUS230 variants.
2014-09-30 03:19:29 +00:00
if_ath_lna_div.h
Initial AR9485/AR933x 1x1 LNA diversity work.
2013-06-14 03:42:10 +00:00
if_ath_misc.h
Add tracking for self-generated frames when the VAP is in sleep state.
2014-05-02 00:48:09 +00:00
if_ath_pci_devlist.h
Add a missing file from the last commit.
2014-09-30 05:50:34 +00:00
if_ath_pci.c
Add initial support for the AR9485 CUS198 / CUS230 variants.
2014-09-30 03:19:29 +00:00
if_ath_rx_edma.c
Fix up the EDMA RX setup path to correctly initialise and reset the RX FIFO.
2014-09-20 01:22:17 +00:00
if_ath_rx_edma.h
…
if_ath_rx.c
Mechanically convert to if_inc_counter().
2014-09-18 20:47:39 +00:00
if_ath_rx.h
Fix the busdma logic to work with EDMA chipsets when using bounce
2013-04-04 08:21:56 +00:00
if_ath_spectral.c
The r48589 promised to remove implicit inclusion of if_var.h soon. Prepare
2013-10-26 17:58:36 +00:00
if_ath_spectral.h
Add a new (skeleton) spectral mode manager module.
2013-01-02 03:59:02 +00:00
if_ath_sysctl.c
Bump the valid GPIO range for rfkill up from 8 to 16.
2014-12-23 18:48:45 +00:00
if_ath_sysctl.h
…
if_ath_tdma.c
Add casts to have it compile on amd64 without complaining about
2014-05-07 19:07:45 +00:00
if_ath_tdma.h
…
if_ath_tsf.h
…
if_ath_tx_edma.c
Quieten the RX/TX descriptor and FIFO setup debugging.
2014-05-05 08:00:50 +00:00
if_ath_tx_edma.h
…
if_ath_tx_ht.c
Implement my first cut at "correct" node power-save and
2013-05-15 18:33:05 +00:00
if_ath_tx_ht.h
Implement my first cut at "correct" node power-save and
2013-05-15 18:33:05 +00:00
if_ath_tx.c
Mechanically convert to if_inc_counter().
2014-09-18 20:47:39 +00:00
if_ath_tx.h
Implement a separate hardware queue threshold for aggregate and non-aggr
2013-05-21 18:13:57 +00:00
if_ath.c
Convert the callouts back to using mutexes.
2014-11-15 01:18:49 +00:00
if_athdfs.h
Add a method to explicitly disable radar reporting if required.
2013-01-02 01:36:10 +00:00
if_athioctl.h
Implement my first cut at "correct" node power-save and
2013-05-15 18:33:05 +00:00
if_athrate.h
Update the rate series setup code to use the decisions already made in
2013-04-17 07:21:30 +00:00
if_athvar.h
Add initial support for the AR9485 CUS198 / CUS230 variants.
2014-09-30 03:19:29 +00:00