freebsd-nq/sys/arm/mv/mvreg.h
2012-03-04 18:13:45 +00:00

333 lines
10 KiB
C

/*-
* Copyright (C) 2007-2008 MARVELL INTERNATIONAL LTD.
* All rights reserved.
*
* Developed by Semihalf.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. Neither the name of MARVELL nor the names of contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _MVREG_H_
#define _MVREG_H_
#define BRIDGE_IRQ_CAUSE 0x10
#define BRIGDE_IRQ_MASK 0x14
#if defined(SOC_MV_DISCOVERY)
#define IRQ_CAUSE_ERROR 0x0
#define IRQ_CAUSE 0x4
#define IRQ_CAUSE_HI 0x8
#define IRQ_MASK_ERROR 0xC
#define IRQ_MASK 0x10
#define IRQ_MASK_HI 0x14
#define IRQ_CAUSE_SELECT 0x18
#define FIQ_MASK_ERROR 0x1C
#define FIQ_MASK 0x20
#define FIQ_MASK_HI 0x24
#define FIQ_CAUSE_SELECT 0x28
#define ENDPOINT_IRQ_MASK_ERROR 0x2C
#define ENDPOINT_IRQ_MASK 0x30
#define ENDPOINT_IRQ_MASK_HI 0x34
#define ENDPOINT_IRQ_CAUSE_SELECT 0x38
#else /* !SOC_MV_DISCOVERY */
#define IRQ_CAUSE 0x0
#define IRQ_MASK 0x4
#define FIQ_MASK 0x8
#define ENDPOINT_IRQ_MASK 0xC
#define IRQ_CAUSE_HI 0x10
#define IRQ_MASK_HI 0x14
#define FIQ_MASK_HI 0x18
#define ENDPOINT_IRQ_MASK_HI 0x1C
#define IRQ_CAUSE_ERROR (-1) /* Fake defines for unified */
#define IRQ_MASK_ERROR (-1) /* interrupt controller code */
#endif
#define BRIDGE_IRQ_CAUSE 0x10
#define IRQ_CPU_SELF 0x00000001
#define IRQ_TIMER0 0x00000002
#define IRQ_TIMER1 0x00000004
#define IRQ_TIMER_WD 0x00000008
#define BRIDGE_IRQ_MASK 0x14
#define IRQ_CPU_MASK 0x00000001
#define IRQ_TIMER0_MASK 0x00000002
#define IRQ_TIMER1_MASK 0x00000004
#define IRQ_TIMER_WD_MASK 0x00000008
/*
* System reset
*/
#define RSTOUTn_MASK 0x8
#define WD_RST_OUT_EN 0x00000002
#define SOFT_RST_OUT_EN 0x00000004
#define SYSTEM_SOFT_RESET 0xc
#define SYS_SOFT_RST 0x00000001
/*
* Power Control
*/
#define CPU_PM_CTRL 0x1C
#define CPU_PM_CTRL_NONE 0
#define CPU_PM_CTRL_ALL ~0x0
#if defined(SOC_MV_KIRKWOOD)
#define CPU_PM_CTRL_GE0 (1 << 0)
#define CPU_PM_CTRL_PEX0_PHY (1 << 1)
#define CPU_PM_CTRL_PEX0 (1 << 2)
#define CPU_PM_CTRL_USB0 (1 << 3)
#define CPU_PM_CTRL_SDIO (1 << 4)
#define CPU_PM_CTRL_TSU (1 << 5)
#define CPU_PM_CTRL_DUNIT (1 << 6)
#define CPU_PM_CTRL_RUNIT (1 << 7)
#define CPU_PM_CTRL_XOR0 (1 << 8)
#define CPU_PM_CTRL_AUDIO (1 << 9)
#define CPU_PM_CTRL_SATA0 (1 << 14)
#define CPU_PM_CTRL_SATA1 (1 << 15)
#define CPU_PM_CTRL_XOR1 (1 << 16)
#define CPU_PM_CTRL_CRYPTO (1 << 17)
#define CPU_PM_CTRL_GE1 (1 << 19)
#define CPU_PM_CTRL_TDM (1 << 20)
#define CPU_PM_CTRL_XOR (CPU_PM_CTRL_XOR0 | CPU_PM_CTRL_XOR1)
#define CPU_PM_CTRL_USB(u) (CPU_PM_CTRL_USB0)
#define CPU_PM_CTRL_SATA (CPU_PM_CTRL_SATA0 | CPU_PM_CTRL_SATA1)
#define CPU_PM_CTRL_GE(u) (CPU_PM_CTRL_GE1 * (u) | CPU_PM_CTRL_GE0 * \
(1 - (u)))
#define CPU_PM_CTRL_IDMA (CPU_PM_CTRL_NONE)
#elif defined(SOC_MV_DISCOVERY)
#define CPU_PM_CTRL_GE0 (1 << 1)
#define CPU_PM_CTRL_GE1 (1 << 2)
#define CPU_PM_CTRL_PEX00 (1 << 5)
#define CPU_PM_CTRL_PEX01 (1 << 6)
#define CPU_PM_CTRL_PEX02 (1 << 7)
#define CPU_PM_CTRL_PEX03 (1 << 8)
#define CPU_PM_CTRL_PEX10 (1 << 9)
#define CPU_PM_CTRL_PEX11 (1 << 10)
#define CPU_PM_CTRL_PEX12 (1 << 11)
#define CPU_PM_CTRL_PEX13 (1 << 12)
#define CPU_PM_CTRL_SATA0_PHY (1 << 13)
#define CPU_PM_CTRL_SATA0 (1 << 14)
#define CPU_PM_CTRL_SATA1_PHY (1 << 15)
#define CPU_PM_CTRL_SATA1 (1 << 16)
#define CPU_PM_CTRL_USB0 (1 << 17)
#define CPU_PM_CTRL_USB1 (1 << 18)
#define CPU_PM_CTRL_USB2 (1 << 19)
#define CPU_PM_CTRL_IDMA (1 << 20)
#define CPU_PM_CTRL_XOR (1 << 21)
#define CPU_PM_CTRL_CRYPTO (1 << 22)
#define CPU_PM_CTRL_DEVICE (1 << 23)
#define CPU_PM_CTRL_USB(u) (1 << (17 + (u)))
#define CPU_PM_CTRL_SATA (CPU_PM_CTRL_SATA0 | CPU_PM_CTRL_SATA1)
#define CPU_PM_CTRL_GE(u) (CPU_PM_CTRL_GE1 * (u) | CPU_PM_CTRL_GE0 * \
(1 - (u)))
#else
#define CPU_PM_CTRL_CRYPTO (CPU_PM_CTRL_NONE)
#define CPU_PM_CTRL_IDMA (CPU_PM_CTRL_NONE)
#define CPU_PM_CTRL_XOR (CPU_PM_CTRL_NONE)
#define CPU_PM_CTRL_SATA (CPU_PM_CTRL_NONE)
#define CPU_PM_CTRL_USB(u) (CPU_PM_CTRL_NONE)
#define CPU_PM_CTRL_GE(u) (CPU_PM_CTRL_NONE)
#endif
/*
* Timers
*/
#define CPU_TIMER_CONTROL 0x0
#define CPU_TIMER0_EN 0x00000001
#define CPU_TIMER0_AUTO 0x00000002
#define CPU_TIMER1_EN 0x00000004
#define CPU_TIMER1_AUTO 0x00000008
#define CPU_TIMER_WD_EN 0x00000010
#define CPU_TIMER_WD_AUTO 0x00000020
#define CPU_TIMER0_REL 0x10
#define CPU_TIMER0 0x14
/*
* SATA
*/
#define SATA_CHAN_NUM 2
#define EDMA_REGISTERS_OFFSET 0x2000
#define EDMA_REGISTERS_SIZE 0x2000
#define SATA_EDMA_BASE(ch) (EDMA_REGISTERS_OFFSET + \
((ch) * EDMA_REGISTERS_SIZE))
/* SATAHC registers */
#define SATA_CR 0x000 /* Configuration Reg. */
#define SATA_CR_NODMABS (1 << 8)
#define SATA_CR_NOEDMABS (1 << 9)
#define SATA_CR_NOPRDPBS (1 << 10)
#define SATA_CR_COALDIS(ch) (1 << (24 + ch))
#define SATA_ICR 0x014 /* Interrupt Cause Reg. */
#define SATA_ICR_DMADONE(ch) (1 << (ch))
#define SATA_ICR_COAL (1 << 4)
#define SATA_ICR_DEV(ch) (1 << (8 + ch))
#define SATA_MICR 0x020 /* Main Interrupt Cause Reg. */
#define SATA_MICR_ERR(ch) (1 << (2 * ch))
#define SATA_MICR_DONE(ch) (1 << ((2 * ch) + 1))
#define SATA_MICR_DMADONE(ch) (1 << (4 + ch))
#define SATA_MICR_COAL (1 << 8)
#define SATA_MIMR 0x024 /* Main Interrupt Mask Reg. */
/* Shadow registers */
#define SATA_SHADOWR_BASE(ch) (SATA_EDMA_BASE(ch) + 0x100)
#define SATA_SHADOWR_CONTROL(ch) (SATA_EDMA_BASE(ch) + 0x120)
/* SATA registers */
#define SATA_SATA_SSTATUS(ch) (SATA_EDMA_BASE(ch) + 0x300)
#define SATA_SATA_SERROR(ch) (SATA_EDMA_BASE(ch) + 0x304)
#define SATA_SATA_SCONTROL(ch) (SATA_EDMA_BASE(ch) + 0x308)
#define SATA_SATA_FISICR(ch) (SATA_EDMA_BASE(ch) + 0x364)
/* EDMA registers */
#define SATA_EDMA_CFG(ch) (SATA_EDMA_BASE(ch) + 0x000)
#define SATA_EDMA_CFG_QL128 (1 << 19)
#define SATA_EDMA_CFG_HQCACHE (1 << 22)
#define SATA_EDMA_IECR(ch) (SATA_EDMA_BASE(ch) + 0x008)
#define SATA_EDMA_IEMR(ch) (SATA_EDMA_BASE(ch) + 0x00C)
#define SATA_EDMA_REQBAHR(ch) (SATA_EDMA_BASE(ch) + 0x010)
#define SATA_EDMA_REQIPR(ch) (SATA_EDMA_BASE(ch) + 0x014)
#define SATA_EDMA_REQOPR(ch) (SATA_EDMA_BASE(ch) + 0x018)
#define SATA_EDMA_RESBAHR(ch) (SATA_EDMA_BASE(ch) + 0x01C)
#define SATA_EDMA_RESIPR(ch) (SATA_EDMA_BASE(ch) + 0x020)
#define SATA_EDMA_RESOPR(ch) (SATA_EDMA_BASE(ch) + 0x024)
#define SATA_EDMA_CMD(ch) (SATA_EDMA_BASE(ch) + 0x028)
#define SATA_EDMA_CMD_ENABLE (1 << 0)
#define SATA_EDMA_CMD_DISABLE (1 << 1)
#define SATA_EDMA_CMD_RESET (1 << 2)
#define SATA_EDMA_STATUS(ch) (SATA_EDMA_BASE(ch) + 0x030)
#define SATA_EDMA_STATUS_IDLE (1 << 7)
/* Offset to extract input slot from REQIPR register */
#define SATA_EDMA_REQIS_OFS 5
/* Offset to extract input slot from RESOPR register */
#define SATA_EDMA_RESOS_OFS 3
/*
* GPIO
*/
#define GPIO_DATA_OUT 0x00
#define GPIO_DATA_OUT_EN_CTRL 0x04
#define GPIO_BLINK_EN 0x08
#define GPIO_DATA_IN_POLAR 0x0c
#define GPIO_DATA_IN 0x10
#define GPIO_INT_CAUSE 0x14
#define GPIO_INT_EDGE_MASK 0x18
#define GPIO_INT_LEV_MASK 0x1c
#define GPIO_HI_DATA_OUT 0x40
#define GPIO_HI_DATA_OUT_EN_CTRL 0x44
#define GPIO_HI_BLINK_EN 0x48
#define GPIO_HI_DATA_IN_POLAR 0x4c
#define GPIO_HI_DATA_IN 0x50
#define GPIO_HI_INT_CAUSE 0x54
#define GPIO_HI_INT_EDGE_MASK 0x58
#define GPIO_HI_INT_LEV_MASK 0x5c
#define GPIO(n) (1 << (n))
#define MV_GPIO_MAX_NPINS 64
#define MV_GPIO_IN_NONE 0x0
#define MV_GPIO_IN_POL_LOW (1 << 16)
#define MV_GPIO_IN_IRQ_EDGE (2 << 16)
#define MV_GPIO_IN_IRQ_LEVEL (4 << 16)
#define MV_GPIO_OUT_NONE 0x0
#define MV_GPIO_OUT_BLINK 0x1
#define MV_GPIO_OUT_OPEN_DRAIN 0x2
#define MV_GPIO_OUT_OPEN_SRC 0x4
#define IS_GPIO_IRQ(irq) ((irq) >= NIRQ && (irq) < NIRQ + MV_GPIO_MAX_NPINS)
#define GPIO2IRQ(gpio) ((gpio) + NIRQ)
#define IRQ2GPIO(irq) ((irq) - NIRQ)
/*
* MPP
*/
#if defined(SOC_MV_ORION)
#define MPP_CONTROL0 0x00
#define MPP_CONTROL1 0x04
#define MPP_CONTROL2 0x50
#elif defined(SOC_MV_KIRKWOOD) || defined(SOC_MV_DISCOVERY)
#define MPP_CONTROL0 0x00
#define MPP_CONTROL1 0x04
#define MPP_CONTROL2 0x08
#define MPP_CONTROL3 0x0C
#define MPP_CONTROL4 0x10
#define MPP_CONTROL5 0x14
#define MPP_CONTROL6 0x18
#else
#error SOC_MV_XX not defined
#endif
#if defined(SOC_MV_ORION)
#define SAMPLE_AT_RESET 0x10
#elif defined(SOC_MV_KIRKWOOD)
#define SAMPLE_AT_RESET 0x30
#elif defined(SOC_MV_DISCOVERY)
#define SAMPLE_AT_RESET_LO 0x30
#define SAMPLE_AT_RESET_HI 0x34
#else
#error SOC_MV_XX not defined
#endif
/*
* Clocks
*/
#if defined(SOC_MV_ORION)
#define TCLK_MASK 0x00000300
#define TCLK_SHIFT 0x08
#elif defined(SOC_MV_DISCOVERY)
#define TCLK_MASK 0x00000180
#define TCLK_SHIFT 0x07
#endif
#define TCLK_100MHZ 100000000
#define TCLK_125MHZ 125000000
#define TCLK_133MHZ 133333333
#define TCLK_150MHZ 150000000
#define TCLK_166MHZ 166666667
#define TCLK_200MHZ 200000000
/*
* Chip ID
*/
#define MV_DEV_88F5181 0x5181
#define MV_DEV_88F5182 0x5182
#define MV_DEV_88F5281 0x5281
#define MV_DEV_88F6281 0x6281
#define MV_DEV_MV78100_Z0 0x6381
#define MV_DEV_MV78100 0x7810
#endif /* _MVREG_H_ */