Olivier Houchard 8f395fae42 Comment out the mapping of the OHCI controller registers va == pa. This ...

address is in the userland address space. The proper thing is either to choose
a virtual address in the kernel address space beyond the KVA, or to use
pmap_mapdev().

2006-07-12 00:48:50 +00:00

..

at91_pdcreg.h

Get this to compile :

2006-05-11 14:30:28 +00:00

at91_pio_rm9200.h

Add support for configuring pins to be one of {GPIO, PERIPHERAL A or

2006-07-02 03:50:44 +00:00

at91_pio.c

Add support for configuring pins to be one of {GPIO, PERIPHERAL A or

2006-07-02 03:50:44 +00:00

at91_pioreg.h

Skeleton PIO support.

2006-03-24 07:39:29 +00:00

at91_piovar.h

Add support for configuring pins to be one of {GPIO, PERIPHERAL A or

2006-07-02 03:50:44 +00:00

at91_pmc.c

improve reporting of clocks

2006-06-17 23:22:10 +00:00

at91_pmcreg.h

Add the sekelton of support for the Power Management Controller.

2006-03-24 07:37:56 +00:00

at91_pmcvar.h

Add the sekelton of support for the Power Management Controller.

2006-03-24 07:37:56 +00:00

at91_rtc.c

Add RTC support. This may be of dubious value since the RTC is reset

2006-03-24 07:35:30 +00:00

at91_rtcreg.h

Add RTC support. This may be of dubious value since the RTC is reset

2006-03-24 07:35:30 +00:00

at91_spi.c

…

at91_spiio.h

…

at91_spireg.h

…

at91_ssc.c

Skeleton support for the SSC device, which implements I2S interfaces,

2006-03-24 07:42:33 +00:00

at91_sscreg.h

Skeleton support for the SSC device, which implements I2S interfaces,

2006-03-24 07:42:33 +00:00

at91_st.c

Resurrect Skyeye support :

2006-05-13 23:41:16 +00:00

at91_streg.h

…

at91_twi.c

Connect twi to the FreeBSD iicbus infrastructure.

2006-04-06 04:31:19 +00:00

at91_twiio.h

…

at91_twireg.h

…

at91_usartreg.h

Remove unused bit definitions.

2006-04-06 04:29:24 +00:00

at91.c

We have an implementation of generic_bs_rr_1, so use it, as some drivers use

2006-05-19 11:27:02 +00:00

at91rm92reg.h

Probe the memory size of the board better. Look at the bus width,

2006-06-20 20:13:40 +00:00

at91var.h

…

files.at91

Backout previous commit, Warner committed at91_pio.c...

2006-06-23 23:07:11 +00:00

files.kb920x

…

hints.at91rm9200

…

hints.at91sam9261

…

if_ate.c

Carefully note the RMII bit in the config register at attach time.

2006-06-17 23:24:35 +00:00

if_atereg.h

…

kb920x_machdep.c

Comment out the mapping of the OHCI controller registers va == pa. This

2006-07-12 00:48:50 +00:00

ohci_atmelarm.c

MFp4:

2006-03-18 01:45:29 +00:00

std.at91

These files apply to all the atmel parts that freebsd is going to run on,

2006-02-17 22:33:13 +00:00

std.kb920x

These files apply to all the atmel parts that freebsd is going to run on,

2006-02-17 22:33:13 +00:00

uart_bus_at91usart.c

Resurrect Skyeye support :

2006-05-13 23:41:16 +00:00

uart_cpu_at91rm9200usart.c

Resurrect Skyeye support :

2006-05-13 23:41:16 +00:00

uart_dev_at91usart.c

MFp4:

2006-07-02 03:45:33 +00:00