Warner Losh 984a9ada81 Add sanity check to make sure that the MAC address isn't all 0's. Bad ...

boot loaders can do this, and this leads to all kinds of ill effects
downstream.  Also, minor formatting nits.

2007-02-08 21:42:10 +00:00

..

at91_mci.c

MFp4: Read access require PDC to be setup first otherwise we might get

2007-01-05 01:18:32 +00:00

at91_mcireg.h

MMC/SD bridge driver (host adapter) for AT91RM9200's MCI interface.

2006-10-20 06:44:04 +00:00

at91_pdcreg.h

Get this to compile :

2006-05-11 14:30:28 +00:00

at91_pio_rm9200.h

Add support for configuring pins to be one of {GPIO, PERIPHERAL A or

2006-07-02 03:50:44 +00:00

at91_pio.c

MFp4:

2006-11-29 08:17:40 +00:00

at91_pioreg.h

Merge from FreeBSD-tsf-6 by way of p4:

2007-01-01 00:46:54 +00:00

at91_piovar.h

MFp4:

2006-07-14 22:22:57 +00:00

at91_pmc.c

MFp4: BWCT boards are using an 16MHz xtal

2007-01-05 01:14:14 +00:00

at91_pmcreg.h

Add the sekelton of support for the Power Management Controller.

2006-03-24 07:37:56 +00:00

at91_pmcvar.h

Add the sekelton of support for the Power Management Controller.

2006-03-24 07:37:56 +00:00

at91_rtc.c

Implement the set_time function. Rather pointless with this RTC, as it

2006-07-14 21:37:19 +00:00

at91_rtcreg.h

MFp4:

2006-07-14 22:06:01 +00:00

at91_spi.c

MFp4:

2006-11-29 07:57:02 +00:00

at91_spireg.h

MFp4: Fix bit name for SPI SR register

2007-01-01 00:50:25 +00:00

at91_ssc.c

Commit WIP SSC driver, more work is needed here, but it configures

2006-10-20 07:08:59 +00:00

at91_sscreg.h

MFp4: Status register bits

2006-10-25 07:58:18 +00:00

at91_st.c

MFp4: Use the next possible value for hz instead of defaulting to 128

2007-01-05 02:52:06 +00:00

at91_streg.h

…

at91_twi.c

at91_twi depends on the iicbus module to satisfy its symbols when

2007-02-06 12:07:14 +00:00

at91_twiio.h

…

at91_twireg.h

…

at91_usartreg.h

Remove unused bit definitions.

2006-04-06 04:29:24 +00:00

at91.c

MFp4: Tweak descriptions in preparation for porting to other members of

2006-11-20 06:27:15 +00:00

at91rm92reg.h

Relocate the vector page for AT91, to work around bugs with the LOW_VECTOR

2006-08-28 20:05:00 +00:00

at91var.h

…

files.at91

MFp4: Make at91_rtc optional to allow other RTC choices

2007-01-05 02:06:53 +00:00

files.kb920x

…

hints.at91rm9200

…

hints.at91sam9261

…

if_ate.c

Add sanity check to make sure that the MAC address isn't all 0's. Bad

2007-02-08 21:42:10 +00:00

if_atereg.h

MFp4: berndt pointed me at an errata that shows that the stat register

2006-09-07 21:50:01 +00:00

kb920x_machdep.c

Threading cleanup.. part 2 of several.

2006-12-06 06:34:57 +00:00

ohci_atmelarm.c

MFp4:

2006-03-18 01:45:29 +00:00

std.at91

MFp4: Move the parameters that are basically dictated by the AT91

2006-10-25 08:00:11 +00:00

std.kb920x

MFp4: Move the parameters that are basically dictated by the AT91

2006-10-25 08:00:11 +00:00

uart_bus_at91usart.c

Resurrect Skyeye support :

2006-05-13 23:41:16 +00:00

uart_cpu_at91rm9200usart.c

Resurrect Skyeye support :

2006-05-13 23:41:16 +00:00

uart_dev_at91usart.c

- Add a uart_rxready() and corresponding device-specific implementations

2007-01-18 22:01:19 +00:00