freebsd-nq/sys/i386/isa
1995-01-23 19:06:08 +00:00
..
ic Peter's work to work around one of the most annoying bugs in the 1995-01-06 15:20:00 +00:00
sound Fix the GUS driver so that it will initialize properly from power-on... 1995-01-04 20:07:27 +00:00
aha1542.c Print out exactly what we think the board is, and for the latest 1995-01-19 12:33:10 +00:00
aha1742.c Expand the EISA MAX_SLOTS from 8 to 16. 1994-11-26 23:10:03 +00:00
aha2742.c
aic6360.c
aic7770.c Add $Id 1995-01-16 16:31:34 +00:00
b004.c From: Luigi Rizzo <luigi@labinfo.iet.unipi.it> 1994-12-31 12:32:59 +00:00
b004.h
bt742a.c
clock.c Submitted by: Bruce Evans 1995-01-19 22:05:27 +00:00
cronyx.c Fix bogus and broken include paths: 1994-12-04 08:51:58 +00:00
ctx.c
ctxreg.h
cx.c Fix bogus and broken include paths: 1994-12-04 08:51:58 +00:00
cxreg.h Cronyx/Sigma sync/async serial driver with PPP support 1994-12-02 23:23:01 +00:00
diskslice_machdep.c Fixed $Id$ 1995-01-23 02:31:53 +00:00
elink.c
elink.h
fd.c Enable floppy-tape controller by default again. Flags no longer has any 1995-01-17 17:32:33 +00:00
fdc.h Peter's work to work around one of the most annoying bugs in the 1995-01-06 15:20:00 +00:00
fdreg.h
ft.c >Originator: Gene Stark 1994-12-04 03:10:09 +00:00
ftreg.h
gpib.c Fix a few nasties in the conversion. 1994-12-17 08:36:50 +00:00
gpib.h Add Fred Cawthorne's GPIB driver. 1994-12-17 08:07:03 +00:00
gpibreg.h Add Fred Cawthorne's GPIB driver. 1994-12-17 08:07:03 +00:00
gsc.c Add a MIN macro. 1995-01-09 11:38:40 +00:00
gscreg.h Gunther Schadow <gusw@fub46.zedat.fu-berlin.de>'s 1995-01-07 14:52:08 +00:00
icu.h
icu.s Define some public labels for use by trap(). 1995-01-14 11:00:27 +00:00
if_cx.c Fix bogus and broken include paths: 1994-12-04 08:51:58 +00:00
if_ed.c Much better fix/support for the 83c795 based cards (the new SMC EtherEZ) 1995-01-23 19:06:08 +00:00
if_edreg.h Much better fix/support for the 83c795 based cards (the new SMC EtherEZ) 1995-01-23 19:06:08 +00:00
if_el.c Move ARP interface initialization into if_ether.c:arp_ifinit(). 1994-12-22 21:56:22 +00:00
if_elreg.h
if_ep.c Restored Herb's current copyright. The one in the file appeared to have 1995-01-08 10:47:23 +00:00
if_epreg.h
if_ie507.h
if_ie.c Move ARP interface initialization into if_ether.c:arp_ifinit(). 1994-12-22 21:56:22 +00:00
if_iereg.h
if_is.c Move ARP interface initialization into if_ether.c:arp_ifinit(). 1994-12-22 21:56:22 +00:00
if_isreg.h
if_le.c Move ARP interface initialization into if_ether.c:arp_ifinit(). 1994-12-22 21:56:22 +00:00
if_lnc.c Move ARP interface initialization into if_ether.c:arp_ifinit(). 1994-12-22 21:56:22 +00:00
if_lnc.h
if_ze.c if_ze was not updated when the arp_ifinit stuff was done. now it is. 1995-01-23 18:02:32 +00:00
if_zereg.h
isa_device.h
isa.c
isa.h Gunther Schadow <gusw@fub46.zedat.fu-berlin.de>'s 1995-01-07 14:52:08 +00:00
iso8859.font
kbd.h
kbdtables.h Changes to allow keypad 5 produce \E[E like SCO/ANSI term does 1994-12-31 11:38:39 +00:00
lpt.c
lptreg.h
mcd.c Merge several probe diagnostics into one. 1994-12-24 13:24:02 +00:00
mcdreg.h Merge several probe diagnostics into one. 1994-12-24 13:24:02 +00:00
mse.c
npx.c Use sufficient parentheses in macros. 1995-01-03 04:00:06 +00:00
npx.c.orig
pas.c
pcaudio.c
psm.c
readMBR.c
README.le
rtc.h Here is a minor patch for FreeBSD 2.0R to allow it to recognize 1994-12-04 20:22:20 +00:00
seagate.c Latest update from Serge Vakulenko <vak@cronyx.ru> 1995-01-10 11:41:28 +00:00
sio.c Submitted by: Bill Paul (wpaul@ctr.columbia.edu) 1995-01-20 07:34:18 +00:00
sioreg.h Submitted by: Bill Paul (wpaul@ctr.columbia.edu) 1995-01-20 07:34:18 +00:00
spkr.c
syscons.c Second round in syscons update: 1995-01-20 08:35:32 +00:00
timerreg.h
tw.c
ultra14f.c Submitted by: Steve Gerakines 1995-01-07 23:23:40 +00:00
vector.s i386/exception.s, 1994-12-03 10:03:19 +00:00
wd7000.c Add support for Olof Johansson's WD7000 driver. 1995-01-23 00:25:44 +00:00
wd.c Fix the "wd" count stat. The seek and xfer stats are still very bogus 1994-12-24 09:43:12 +00:00
wdreg.h
wt.c fix for: kern/97: wt DELAY patch 1995-01-09 17:55:10 +00:00
wtreg.h

$Id: README.le,v 1.1 1994/10/01 20:15:43 wollman Exp $

----------------

This driver is in no way supported by Digital Equipment.  See the
disclaimers in the sources for more.

This driver supports all the DEC EtherWORKS III NICs (DE203, DE204,
and DE205) and the later DEC EtherWORKS II NICs (DE200, DE201, DE202,
DE422).  DEPCA-style boards prior to the DE200 have not been tested
and may not work.  

This driver is not EISA aware.  If you are using a DE422 or have
configured the EtherWORKS III in EISA mode, make sure you specify
the I/O port properly as this driver will *not* probe for it.
(The I/O port should be 0xNc00 where N is the EISA slot number).

This driver does not yet use the full 128KB allowed by the DE422.
Someday, it might. For EtherWORKS III NICs, the driver will override
the EEPROM setting of MemoryMode and *always* use the 2K for best
results.

The driver includes full support for both BPF and IP Multicast.

[All paths are relative to the top of sys source area, usually
/usr/src/sys.]

The following files need to be moved into their respective
directories:

	if_le.c	   -->	i386/isa
	am7990.h   -->	i386/isa/ic
	lemac.h	   -->	i386/isa/ic

You will need to apply the patch provided in pat.files.i386 to
i386/conf/files.i386 file.

After that is done you will need to edit your config file (in
i386/conf) and a line similar to:

device le0 at isa? port 0x300 net irq 5 iomem 0xd0000 vector le_intr

[The above line assumes the board is still at the factory defaults.]
Change the port, irq, and iomem value if needed to your configuration.

Now you are ready to rebuild your kernel, reboot, and see if the
driver can configure your board.  When the system boots, you will
hopefully something close to:

    EtherWORKS II:

	le0 at 0x300-0x30f irq 5 maddr 0xd0000 msize 65536 on isa
	le0: DE202 ethernet address 08:00:2b:2d:c8:45
	bpf: le0 attached

    EtherWORKS III:

	le0 at 0x320-0x33f irq 5 maddr 0xd0000 msize 2048 on isa
	le0: DE205-AB ethernet address 08:00:2b:bb:23:e0
	le0 attached

in the startup log.  If so, the board configured properly and
should be ready to use.

--
Mail:	thomas@lkg.dec.com
URL:	http://ftp.digital.com/~thomas/