d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
1a0ebdcac7
freebsd-skq/sys/conf/files.powerpc

156 lines
6.2 KiB
Plaintext
Raw Normal View History

The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
# This file tells config what files go into building a kernel,
# files marked standard are always included.
#
# $FreeBSD$
#
# The long compile-with and dependency lines are required because of
# limitations in config: backslash-newline doesn't work in strings, and
# dependency lines other than the first are silently ignored.
#
#
Align.
2007-10-25 14:16:07 +00:00
font.h optional sc \
Sort.
2007-12-14 23:47:39 +00:00
compile-with "uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x16.fnt && file2c 'u_char dflt_font_16[16*256] = {' '};' < ${SC_DFLT_FONT}-8x16 > font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x14.fnt && file2c 'u_char dflt_font_14[14*256] = {' '};' < ${SC_DFLT_FONT}-8x14 >> font.h && uudecode < /usr/share/syscons/fonts/${SC_DFLT_FONT}-8x8.fnt && file2c 'u_char dflt_font_8[8*256] = {' '};' < ${SC_DFLT_FONT}-8x8 >> font.h" \
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
no-obj no-implicit-rule before-depend \
clean "font.h ${SC_DFLT_FONT}-8x14 ${SC_DFLT_FONT}-8x16 ${SC_DFLT_FONT}-8x8"
add glue for ath_hal MFC after: 1 month
2006-06-08 23:38:01 +00:00
#
hal.o optional ath_hal \
dependency "$S/contrib/dev/ath/public/powerpc-be-elf.hal.o.uu" \
compile-with "uudecode < $S/contrib/dev/ath/public/powerpc-be-elf.hal.o.uu" \
no-implicit-rule
opt_ah.h optional ath_hal \
dependency "$S/contrib/dev/ath/public/powerpc-be-elf.opt_ah.h" \
opt_ah.h ends up copied into a kernelcompile directory in some aches as a read-only file. In a number of cases this has led to compiles failing- usually due to some strange NFS drift which thinks that the opt_ah.h in the compile directory is out of date wrt the source it is copied from. When the copy is executed again, it fails because the target is read-only. Oops. Modify the compile hooks avoid this. Discussed with a while back with: Sam Leffler
2006-12-18 05:45:23 +00:00
compile-with "rm -f opt_ah.h; cp $S/contrib/dev/ath/public/powerpc-be-elf.opt_ah.h opt_ah.h" \
add glue for ath_hal MFC after: 1 month
2006-06-08 23:38:01 +00:00
no-obj no-implicit-rule before-depend \
clean "opt_ah.h"
#
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
Sort.
2007-12-14 23:47:39 +00:00
crypto/blowfish/bf_enc.c optional crypto | ipsec
crypto/des/des_enc.c optional crypto | ipsec | netsmb
Add support for the Apple Big Mac (BMAC) Ethernet controller, found on various Apple G3 models. Submitted by: Nathan Whitehorn
2008-06-07 22:58:32 +00:00
dev/bm/if_bm.c optional bm powermac
Add a driver for flash memory that implements to the Common Flash Memory Interface (CFI). The flash memory can be read and written to through /dev/cfi# and an ioctl() exists so processes can read the query information. The driver supports the AMD and Intel command set, though only the AMD command has been tested. Obtained from: Juniper Networks, Inc.
2008-10-25 06:18:12 +00:00
dev/cfi/cfi_bus_lbc.c optional cfi
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
dev/fb/fb.c optional sc
MFP4: - Implement sampling modes and logging support in hwpmc(4). - Separate MI and MD parts of hwpmc(4) and allow sharing of PMC implementations across different architectures. Add support for P4 (EMT64) style PMCs to the amd64 code. - New pmcstat(8) options: -E (exit time counts) -W (counts every context switch), -R (print log file). - pmc(3) API changes, improve our ability to keep ABI compatibility in the future. Add more 'alias' names for commonly used events. - bug fixes & documentation.
2005-06-09 19:45:09 +00:00
dev/hwpmc/hwpmc_powerpc.c optional hwpmc
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
dev/kbd/kbd.c optional sc
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
dev/ofw/openfirm.c optional aim
Enable ofwdump on powerpc (finally). Tested on G3 & G4 machines. Submitted by: Dan Stekloff <dsteklof at c i s c o dot com> Discussed with: marcel
2008-01-31 01:57:33 +00:00
dev/ofw/openfirmio.c optional aim
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
dev/ofw/ofw_bus_if.m optional aim
dev/ofw/ofw_bus_subr.c optional aim
dev/ofw/ofw_console.c optional aim
dev/ofw/ofw_disk.c optional ofwd aim
Sort.
2007-12-14 23:47:39 +00:00
dev/powermac_nvram/powermac_nvram.c optional powermac_nvram powermac
Connect MPC85XX to the PowerPC build. The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies: 1. make buildworld TARGET_ARCH=powerpc 2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX This default config uses kernel-level FPU emulation. For the soft-float world approach: 1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX 3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX Approved by: cognet (mentor) MFp4: e500
2008-03-03 20:40:20 +00:00
dev/quicc/quicc_bfe_ocp.c optional quicc mpc85xx
Sort.
2007-12-14 23:47:39 +00:00
dev/scc/scc_bfe_macio.c optional scc powermac
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
dev/syscons/scgfbrndr.c optional sc
dev/syscons/scterm-sc.c optional sc
dev/syscons/scvtb.c optional sc
Connect MPC85XX to the PowerPC build. The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies: 1. make buildworld TARGET_ARCH=powerpc 2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX This default config uses kernel-level FPU emulation. For the soft-float world approach: 1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX 3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX Approved by: cognet (mentor) MFp4: e500
2008-03-03 20:40:20 +00:00
dev/tsec/if_tsec.c optional tsec
tsec: Refactor driver's structure. Split the driver into the core functionality part (sys/dev/tsec/if_tsec.c) and the bus attachment (sys/dev/tsec/if_tsec_ocp.c). This lets better integrate and maintain the driver in other environments with different attachment abstractions (there is at least one other FreeBSD port -- MPC83xx -- which uses this TSEC driver, but with different local bus model i.e. some OF derivative). While there, clean up and fix minor cosmetics. Obtained from: Semihalf
2008-08-26 10:41:49 +00:00
dev/tsec/if_tsec_ocp.c optional tsec mpc85xx
Connect MPC85XX to the PowerPC build. The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies: 1. make buildworld TARGET_ARCH=powerpc 2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX This default config uses kernel-level FPU emulation. For the soft-float world approach: 1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX 3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX Approved by: cognet (mentor) MFp4: e500
2008-03-03 20:40:20 +00:00
dev/uart/uart_bus_ocp.c optional uart mpc85xx
Allow uart(4) to be built on PowerPC.
2006-03-31 01:42:55 +00:00
dev/uart/uart_cpu_powerpc.c optional uart
Fix build for non-WITNESS case spotted by: Suleiman Souhlal <refugee@segfaulted.com>
2004-07-11 01:38:25 +00:00
kern/syscalls.c optional ktr
Sort.
2007-12-14 23:47:39 +00:00
libkern/ashldi3.c standard
libkern/ashrdi3.c standard
libkern/bcmp.c standard
Hook-up the FPU emulator. It's optional upon FPU_EMU.
2008-02-23 20:16:38 +00:00
libkern/cmpdi2.c standard
Sort.
2007-12-14 23:47:39 +00:00
libkern/divdi3.c standard
libkern/ffs.c standard
libkern/ffsl.c standard
libkern/fls.c standard
libkern/flsl.c standard
libkern/lshrdi3.c standard
libkern/memset.c standard
libkern/moddi3.c standard
libkern/qdivrem.c standard
libkern/ucmpdi2.c standard
libkern/udivdi3.c standard
libkern/umoddi3.c standard
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
powerpc/aim/clock.c optional aim
powerpc/aim/copyinout.c optional aim
powerpc/aim/interrupt.c optional aim
powerpc/aim/locore.S optional aim no-obj
powerpc/aim/machdep.c optional aim
powerpc/aim/mmu_oea.c optional aim
MFp4: SMP support
2008-04-27 22:33:43 +00:00
powerpc/aim/mp_cpudep.c optional aim smp
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
powerpc/aim/nexus.c optional aim
powerpc/aim/ofw_machdep.c optional aim
powerpc/aim/ofwmagic.S optional aim
powerpc/aim/swtch.S optional aim
powerpc/aim/trap.c optional aim
powerpc/aim/uio_machdep.c optional aim
powerpc/aim/uma_machdep.c optional aim
powerpc/aim/vm_machdep.c optional aim
Connect MPC85XX to the PowerPC build. The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies: 1. make buildworld TARGET_ARCH=powerpc 2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX This default config uses kernel-level FPU emulation. For the soft-float world approach: 1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX 3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX Approved by: cognet (mentor) MFp4: e500
2008-03-03 20:40:20 +00:00
powerpc/booke/clock.c optional e500
powerpc/booke/copyinout.c optional e500
powerpc/booke/interrupt.c optional e500
powerpc/booke/locore.S optional e500 no-obj
powerpc/booke/machdep.c optional e500
powerpc/booke/pmap.c optional e500
powerpc/booke/support.S optional e500
powerpc/booke/swtch.S optional e500
powerpc/booke/trap.c optional e500
powerpc/booke/uio_machdep.c optional e500
powerpc/booke/vm_machdep.c optional e500
Hook-up the FPU emulator. It's optional upon FPU_EMU.
2008-02-23 20:16:38 +00:00
powerpc/fpu/fpu_add.c optional fpu_emu
powerpc/fpu/fpu_compare.c optional fpu_emu
powerpc/fpu/fpu_div.c optional fpu_emu
powerpc/fpu/fpu_emu.c optional fpu_emu
powerpc/fpu/fpu_explode.c optional fpu_emu
powerpc/fpu/fpu_implode.c optional fpu_emu
powerpc/fpu/fpu_mul.c optional fpu_emu
powerpc/fpu/fpu_sqrt.c optional fpu_emu
powerpc/fpu/fpu_subr.c optional fpu_emu
Add a driver for the Local Bus Controller. Obtained from: Juniper Networks, Inc.
2008-10-25 06:03:40 +00:00
powerpc/mpc85xx/lbc.c optional mpc85xx
Introduce a dedicated file for MPC85xx-specific routines. Move cpu_reset() there, as it's not relevant to Book-E specification, but is an implementation detail, directly dependent on the given SoC version.
2008-04-26 17:57:29 +00:00
powerpc/mpc85xx/mpc85xx.c optional mpc85xx
Connect MPC85XX to the PowerPC build. The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies: 1. make buildworld TARGET_ARCH=powerpc 2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX This default config uses kernel-level FPU emulation. For the soft-float world approach: 1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX 3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX Approved by: cognet (mentor) MFp4: e500
2008-03-03 20:40:20 +00:00
powerpc/mpc85xx/nexus.c optional mpc85xx
powerpc/mpc85xx/ocpbus.c optional mpc85xx
powerpc/mpc85xx/opic.c optional mpc85xx
powerpc/mpc85xx/pci_ocp.c optional pci mpc85xx
Convert PowerPC AIM PCI and nexus busses to standard OFW bus interface. This simplifies certain device attachments (Kauai ATA, for instance), and makes possible others on new hardware. On G5 systems, there are several otherwise standard PCI devices (Serverworks SATA) that will not allow their interrupt properties to be written, so this information must be supplied directly from Open Firmware. Obtained from: sparc64
2008-10-14 14:54:14 +00:00
powerpc/ofw/ofw_pcibus.c optional pci aim
Make files under src/sys/powerpc/aim, as well as Open Firmware related files dependent upon option/cpu AIM. This is in preparation of adding support for Book-E (e500) support. Obtained from: Juniper, Semihalf
2007-12-16 01:02:47 +00:00
powerpc/ofw/ofw_pcib_pci.c optional pci aim
powerpc/ofw/ofw_syscons.c optional sc aim
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powermac/ata_kauai.c optional powermac ata
powerpc/powermac/ata_macio.c optional powermac ata
Add DMA support for Apple built-in ATA controllers. Tested by: grehan, marcotrillo@gmail.com MFC after: 1 month
2008-09-27 15:13:44 +00:00
powerpc/powermac/ata_dbdma.c optional powermac ata
Add support for Apple's Descriptor-Based DMA (DBDMA) engine. The DMA engine is usful to various existing drivers, such as ata(4) and scc(4), and is used bhy the soon to be added bm(4). Submitted by: Nathan Whitehorn
2008-06-07 21:56:48 +00:00
powerpc/powermac/dbdma.c optional powermac pci
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powermac/grackle.c optional powermac pci
powerpc/powermac/hrowpic.c optional powermac pci
powerpc/powermac/macio.c optional powermac pci
powerpc/powermac/openpic_macio.c optional powermac pci
powerpc/powermac/pswitch.c optional powermac pswitch
powerpc/powermac/uninorth.c optional powermac pci
Convert remaining .s files to .S Approved by: benno
2003-01-22 01:34:37 +00:00
powerpc/powerpc/atomic.S standard
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/autoconf.c standard
powerpc/powerpc/bcopy.c standard
Redefine bus_space_tag_t on PowerPC from a 32-bit integral to a pointer to struct bus_space. The structure contains function pointers that do the actual bus space access. The reason for this change is that previously all bus space accesses were little endian (i.e. had an explicit byte-swap for multi-byte accesses), because all busses on Macs are little endian. The upcoming support for Book E, and in particular the E500 core, requires support for big-endian busses because all embedded peripherals are in the native byte-order. With this change, there's no distinction between I/O port space and memory mapped I/O. PowerPC doesn't have I/O port space. Busses assign tags based on the byte-order only. For that purpose, two global structures exist (bs_be_tag and bs_le_tag), of which the address can be taken to get a valid tag. Obtained from: Juniper, Semihalf
2007-12-19 18:00:50 +00:00
powerpc/powerpc/bus_machdep.c standard
1) Add busdma machdep code. 2) Add bus_pio.h and bus_memio.h (which do nothing). Submitted by: Peter Grehan <peterg@ptree32.com.au> (1)
2002-07-09 12:47:14 +00:00
powerpc/powerpc/busdma_machdep.c standard
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/copystr.c standard
Add cpu.c. This contains one exported function, cpu_setup(), which handles setup of and printing information about cpus. Obtained from: NetBSD (parts)
2003-02-05 12:09:53 +00:00
powerpc/powerpc/cpu.c standard
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powerpc/db_disasm.c optional ddb
powerpc/powerpc/db_hwwatch.c optional ddb
powerpc/powerpc/db_interface.c optional ddb
powerpc/powerpc/db_trace.c optional ddb
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/elf_machdep.c standard
Connect MPC85XX to the PowerPC build. The kernel config file is KERNCONF=MPC85XX, so the usual procedure applies: 1. make buildworld TARGET_ARCH=powerpc 2. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX This default config uses kernel-level FPU emulation. For the soft-float world approach: 1. make buildworld TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 2. disable FPU_EMU option in sys/powerpc/conf/MPC85XX 3. make buildkernel TARGET_ARCH=powerpc TARGET_CPUTYPE=e500 KERNCONF=MPC85XX Approved by: cognet (mentor) MFp4: e500
2008-03-03 20:40:20 +00:00
powerpc/powerpc/fpu.c optional aim
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/fuswintr.c standard
Add skeletal support for GDB. In particular gdb_cpu_getreg() needs implementing to make GDB support usable.
2006-08-24 21:52:11 +00:00
powerpc/powerpc/gdb_machdep.c optional gdb
Add in_cksum.c
2002-06-29 09:50:20 +00:00
powerpc/powerpc/in_cksum.c optional inet
Add interrupt handling support code. I've tried to make this fairly platform-independant as some PowerPC platforms may not have openpic-style interrupt controllers. This may not have the best performance but it works for now.
2002-07-09 11:12:20 +00:00
powerpc/powerpc/intr_machdep.c standard
Sort.
2007-12-14 23:47:39 +00:00
powerpc/powerpc/mem.c optional mem
Insert a layer of indirection to the pmap code, using a kobj for the interface. This allows run-time selection of MMU code, based on CPU-type detection, or tunable-overrides when testing new code. Pre-requisite for G5 support. conf/files.powerpc - remove pmap.c - add mmu_if.h, mmu_oea.c, pmap_dispatch.c powerpc/include/mmuvar.h - definitions for MMU implementations powerpc/include/pmap.h - remove pmap_pte_spill declaration - add pmap_mmu_install declaration - size the phys_avail array - pmap_bootstrapped is now global-scope powerpc/powerpc/machdep.c - call kobj_machdep_init early in the boot sequence to allow kobj usage prior to SI_SUB_LOCK - install the OEA pmap code. This will be moved to CPU-specific init code in the future. powerpc/powerpc/mmu_if.m - Kobj MMU interface definitions powerpc/powerpc/pmap_dispatch.c - central dispatch for pmap calls - contains the global mmu kobj and the routine to locate the the mmu implementation and init the kobj
2005-11-08 06:48:08 +00:00
powerpc/powerpc/mmu_if.m standard
mp_machdep.c is only conditional upon smp, not aim. If booke grows support for smp, mp_machdep.c needs to be included as well.
2008-04-30 00:50:50 +00:00
powerpc/powerpc/mp_machdep.c optional smp
Driver for OpenPIC compatible interrupt controllers. It's fairly PowerMac specific at the moment, but that should be fixable.
2002-07-09 11:26:10 +00:00
powerpc/powerpc/openpic.c standard
Add interrupt handling support code. I've tried to make this fairly platform-independant as some PowerPC platforms may not have openpic-style interrupt controllers. This may not have the best performance but it works for now.
2002-07-09 11:12:20 +00:00
powerpc/powerpc/pic_if.m standard
Insert a layer of indirection to the pmap code, using a kobj for the interface. This allows run-time selection of MMU code, based on CPU-type detection, or tunable-overrides when testing new code. Pre-requisite for G5 support. conf/files.powerpc - remove pmap.c - add mmu_if.h, mmu_oea.c, pmap_dispatch.c powerpc/include/mmuvar.h - definitions for MMU implementations powerpc/include/pmap.h - remove pmap_pte_spill declaration - add pmap_mmu_install declaration - size the phys_avail array - pmap_bootstrapped is now global-scope powerpc/powerpc/machdep.c - call kobj_machdep_init early in the boot sequence to allow kobj usage prior to SI_SUB_LOCK - install the OEA pmap code. This will be moved to CPU-specific init code in the future. powerpc/powerpc/mmu_if.m - Kobj MMU interface definitions powerpc/powerpc/pmap_dispatch.c - central dispatch for pmap calls - contains the global mmu kobj and the routine to locate the the mmu implementation and init the kobj
2005-11-08 06:48:08 +00:00
powerpc/powerpc/pmap_dispatch.c standard
Add syscons files, and also generate a syscons font since Apple SVGA adapters don't have one available in their ROMs.
2004-01-21 05:19:59 +00:00
powerpc/powerpc/sc_machdep.c optional sc
Add setjmp (needed for DDB).
2002-07-10 12:26:17 +00:00
powerpc/powerpc/setjmp.S standard
Add sigcode.S
2002-04-30 11:13:16 +00:00
powerpc/powerpc/sigcode.S standard
Break out stack(9) from ddb(4): - Introduce per-architecture stack_machdep.c to hold stack_save(9). - Introduce per-architecture machine/stack.h to capture any common definitions required between db_trace.c and stack_machdep.c. - Add new kernel option "options STACK"; we will build in stack(9) if it is defined, or also if "options DDB" is defined to provide compatibility with existing users of stack(9). Add new stack_save_td(9) function, which allows the capture of a stacktrace of another thread rather than the current thread, which the existing stack_save(9) was limited to. It requires that the thread be neither swapped out nor running, which is the responsibility of the consumer to enforce. Update stack(9) man page. Build tested: amd64, arm, i386, ia64, powerpc, sparc64, sun4v Runtime tested: amd64 (rwatson), arm (cognet), i386 (rwatson)
2007-12-02 20:40:35 +00:00
powerpc/powerpc/stack_machdep.c optional ddb | stack
The final commit for the first phase of PowerPC support. This adds the config stuff needed to build kernels. Reviewed by: obrien
2001-06-17 09:39:44 +00:00
powerpc/powerpc/suswintr.c standard
powerpc/powerpc/syncicache.c standard
powerpc/powerpc/sys_machdep.c standard
Align.
2007-10-25 14:16:07 +00:00
powerpc/psim/iobus.c optional psim
powerpc/psim/ata_iobus.c optional ata psim
powerpc/psim/openpic_iobus.c optional psim
powerpc/psim/uart_iobus.c optional uart psim
Reference in New Issue Copy Permalink