freebsd-skq/sys/dev/fb/vesa.c

1868 lines
43 KiB
C
Raw Normal View History

/*-
* Copyright (c) 1998 Kazutaka YOKOTA and Michael Smith
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer as
* the first lines of this file unmodified.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_vga.h"
#include "opt_vesa.h"
#ifndef VGA_NO_MODE_CHANGE
#include <sys/param.h>
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
#include <sys/bus.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/malloc.h>
#include <sys/fbio.h>
#include <vm/vm.h>
#include <vm/vm_extern.h>
#include <vm/vm_kern.h>
#include <vm/vm_param.h>
#include <vm/pmap.h>
#include <machine/pc/bios.h>
#include <dev/fb/vesa.h>
#include <dev/fb/fbreg.h>
#include <dev/fb/vgareg.h>
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
#include <dev/pci/pcivar.h>
#include <isa/isareg.h>
#include <compat/x86bios/x86bios.h>
#define VESA_VIA_CLE266 "VIA CLE266\r\n"
#ifndef VESA_DEBUG
#define VESA_DEBUG 0
#endif
/* VESA video adapter state buffer stub */
struct adp_state {
int sig;
#define V_STATE_SIG 0x61736576
u_char regs[1];
};
typedef struct adp_state adp_state_t;
/* VESA video adapter */
static video_adapter_t *vesa_adp = NULL;
static ssize_t vesa_state_buf_size = -1;
/* VESA functions */
#if 0
static int vesa_nop(void);
#endif
static int vesa_error(void);
static vi_probe_t vesa_probe;
static vi_init_t vesa_init;
static vi_get_info_t vesa_get_info;
static vi_query_mode_t vesa_query_mode;
static vi_set_mode_t vesa_set_mode;
static vi_save_font_t vesa_save_font;
static vi_load_font_t vesa_load_font;
static vi_show_font_t vesa_show_font;
static vi_save_palette_t vesa_save_palette;
static vi_load_palette_t vesa_load_palette;
static vi_set_border_t vesa_set_border;
static vi_save_state_t vesa_save_state;
static vi_load_state_t vesa_load_state;
static vi_set_win_org_t vesa_set_origin;
static vi_read_hw_cursor_t vesa_read_hw_cursor;
static vi_set_hw_cursor_t vesa_set_hw_cursor;
static vi_set_hw_cursor_shape_t vesa_set_hw_cursor_shape;
static vi_blank_display_t vesa_blank_display;
static vi_mmap_t vesa_mmap;
static vi_ioctl_t vesa_ioctl;
static vi_clear_t vesa_clear;
static vi_fill_rect_t vesa_fill_rect;
static vi_bitblt_t vesa_bitblt;
static vi_diag_t vesa_diag;
static int vesa_bios_info(int level);
static video_switch_t vesavidsw = {
vesa_probe,
vesa_init,
vesa_get_info,
vesa_query_mode,
vesa_set_mode,
vesa_save_font,
vesa_load_font,
vesa_show_font,
vesa_save_palette,
vesa_load_palette,
vesa_set_border,
vesa_save_state,
vesa_load_state,
vesa_set_origin,
vesa_read_hw_cursor,
vesa_set_hw_cursor,
vesa_set_hw_cursor_shape,
vesa_blank_display,
vesa_mmap,
vesa_ioctl,
vesa_clear,
vesa_fill_rect,
vesa_bitblt,
vesa_error,
vesa_error,
vesa_diag,
};
static video_switch_t *prevvidsw;
/* VESA BIOS video modes */
#define VESA_MAXMODES 64
#define EOT (-1)
#define NA (-2)
#define MODE_TABLE_DELTA 8
static int vesa_vmode_max = 0;
static video_info_t vesa_vmode_empty = { EOT };
static video_info_t *vesa_vmode = &vesa_vmode_empty;
static int vesa_init_done = FALSE;
static int has_vesa_bios = FALSE;
static struct vesa_info *vesa_adp_info = NULL;
static u_int16_t *vesa_vmodetab = NULL;
static char *vesa_oemstr = NULL;
static char *vesa_venderstr = NULL;
static char *vesa_prodstr = NULL;
static char *vesa_revstr = NULL;
/* local macros and functions */
#define BIOS_SADDRTOLADDR(p) ((((p) & 0xffff0000) >> 12) + ((p) & 0x0000ffff))
static int int10_set_mode(int mode);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
static int vesa_bios_post(void);
static int vesa_bios_get_mode(int mode, struct vesa_mode *vmode);
static int vesa_bios_set_mode(int mode);
#if 0
static int vesa_bios_get_dac(void);
#endif
static int vesa_bios_set_dac(int bits);
static int vesa_bios_save_palette(int start, int colors, u_char *palette,
int bits);
static int vesa_bios_save_palette2(int start, int colors, u_char *r, u_char *g,
u_char *b, int bits);
static int vesa_bios_load_palette(int start, int colors, u_char *palette,
int bits);
static int vesa_bios_load_palette2(int start, int colors, u_char *r, u_char *g,
u_char *b, int bits);
#define STATE_SIZE 0
#define STATE_SAVE 1
#define STATE_LOAD 2
#define STATE_HW (1<<0)
#define STATE_DATA (1<<1)
#define STATE_DAC (1<<2)
#define STATE_REG (1<<3)
#define STATE_MOST (STATE_HW | STATE_DATA | STATE_REG)
#define STATE_ALL (STATE_HW | STATE_DATA | STATE_DAC | STATE_REG)
static ssize_t vesa_bios_state_buf_size(void);
static int vesa_bios_save_restore(int code, void *p, size_t size);
#if 0
static int vesa_bios_get_line_length(void);
#endif
static int vesa_bios_set_line_length(int pixel, int *bytes, int *lines);
#if 0
static int vesa_bios_get_start(int *x, int *y);
#endif
static int vesa_bios_set_start(int x, int y);
static int vesa_map_gen_mode_num(int type, int color, int mode);
static int vesa_translate_flags(u_int16_t vflags);
static int vesa_translate_mmodel(u_int8_t vmodel);
static int vesa_bios_init(void);
static void vesa_clear_modes(video_info_t *info, int color);
#if 0
static int vesa_get_origin(video_adapter_t *adp, off_t *offset);
#endif
/* INT 10 BIOS calls */
static int
int10_set_mode(int mode)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AL = mode;
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
static int
vesa_bios_post(void)
{
x86regs_t regs;
devclass_t dc;
device_t *devs;
device_t dev;
int count, i, is_pci;
if (x86bios_get_orm(0xc0000) == NULL)
return (1);
dev = NULL;
is_pci = 0;
/* Find the matching PCI video controller. */
dc = devclass_find("vgapci");
if (dc != NULL && devclass_get_devices(dc, &devs, &count) == 0) {
for (dev = NULL, i = 0; dev == NULL && i < count; devs++, i++)
if (device_get_flags(*devs) != 0 &&
x86bios_match_device(0xc0000, *devs)) {
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
dev = *devs;
is_pci = 1;
break;
}
free(devs, M_TEMP);
}
/* Try VGA if a PCI device is not found. */
if (dev == NULL) {
dc = devclass_find(VGA_DRIVER_NAME);
if (dc != NULL)
dev = devclass_get_device(dc, 0);
}
if (bootverbose)
printf("%s: calling BIOS POST\n",
dev == NULL ? "VESA" : device_get_nameunit(dev));
x86bios_init_regs(&regs);
if (is_pci) {
regs.R_AH = pci_get_bus(dev);
regs.R_AL = (pci_get_slot(dev) << 3) |
(pci_get_function(dev) & 0x07);
}
regs.R_DL = 0x80;
x86bios_call(&regs, 0xc000, 0x0003);
if (x86bios_get_intr(0x10) == 0)
return (1);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
/* VESA BIOS calls */
static int
vesa_bios_get_mode(int mode, struct vesa_mode *vmode)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
uint32_t offs;
void *buf;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
buf = x86bios_alloc(&offs, sizeof(*vmode));
if (buf == NULL)
return (1);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f01;
regs.R_CX = mode;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
regs.R_ES = X86BIOS_PHYSTOSEG(offs);
regs.R_DI = X86BIOS_PHYSTOOFF(offs);
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (regs.R_AX != 0x004f) {
x86bios_free(buf, sizeof(*vmode));
return (1);
}
bcopy(buf, vmode, sizeof(*vmode));
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_free(buf, sizeof(*vmode));
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
static int
vesa_bios_set_mode(int mode)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f02;
regs.R_BX = mode;
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (regs.R_AX != 0x004f);
}
#if 0
static int
vesa_bios_get_dac(void)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f08;
regs.R_BL = 1;
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (regs.R_AX != 0x004f)
return (6);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (regs.R_BH);
}
#endif
static int
vesa_bios_set_dac(int bits)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f08;
/* regs.R_BL = 0; */
regs.R_BH = bits;
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (regs.R_AX != 0x004f)
return (6);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (regs.R_BH);
}
static int
vesa_bios_save_palette(int start, int colors, u_char *palette, int bits)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
uint32_t offs;
u_char *p;
int i;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
p = (u_char *)x86bios_alloc(&offs, colors * 4);
if (p == NULL)
return (1);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f09;
regs.R_BL = 1;
regs.R_CX = colors;
regs.R_DX = start;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
regs.R_ES = X86BIOS_PHYSTOSEG(offs);
regs.R_DI = X86BIOS_PHYSTOOFF(offs);
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (regs.R_AX != 0x004f) {
x86bios_free(p, colors * 4);
return (1);
}
bits = 8 - bits;
for (i = 0; i < colors; ++i) {
palette[i * 3] = p[i * 4 + 2] << bits;
palette[i * 3 + 1] = p[i * 4 + 1] << bits;
palette[i * 3 + 2] = p[i * 4] << bits;
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_free(p, colors * 4);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
static int
vesa_bios_save_palette2(int start, int colors, u_char *r, u_char *g, u_char *b,
int bits)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
uint32_t offs;
u_char *p;
int i;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
p = (u_char *)x86bios_alloc(&offs, colors * 4);
if (p == NULL)
return (1);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f09;
regs.R_BL = 1;
regs.R_CX = colors;
regs.R_DX = start;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
regs.R_ES = X86BIOS_PHYSTOSEG(offs);
regs.R_DI = X86BIOS_PHYSTOOFF(offs);
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (regs.R_AX != 0x004f) {
x86bios_free(p, colors * 4);
return (1);
}
bits = 8 - bits;
for (i = 0; i < colors; ++i) {
r[i] = p[i * 4 + 2] << bits;
g[i] = p[i * 4 + 1] << bits;
b[i] = p[i * 4] << bits;
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_free(p, colors * 4);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
static int
vesa_bios_load_palette(int start, int colors, u_char *palette, int bits)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
uint32_t offs;
u_char *p;
int i;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
p = (u_char *)x86bios_alloc(&offs, colors * 4);
if (p == NULL)
return (1);
x86bios_init_regs(&regs);
regs.R_AX = 0x4f09;
/* regs.R_BL = 0; */
regs.R_CX = colors;
regs.R_DX = start;
regs.R_ES = X86BIOS_PHYSTOSEG(offs);
regs.R_DI = X86BIOS_PHYSTOOFF(offs);
bits = 8 - bits;
for (i = 0; i < colors; ++i) {
p[i * 4] = palette[i * 3 + 2] >> bits;
p[i * 4 + 1] = palette[i * 3 + 1] >> bits;
p[i * 4 + 2] = palette[i * 3] >> bits;
p[i * 4 + 3] = 0;
}
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_free(p, colors * 4);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (regs.R_AX != 0x004f);
}
static int
vesa_bios_load_palette2(int start, int colors, u_char *r, u_char *g, u_char *b,
int bits)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
uint32_t offs;
u_char *p;
int i;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
p = (u_char *)x86bios_alloc(&offs, colors * 4);
if (p == NULL)
return (1);
x86bios_init_regs(&regs);
regs.R_AX = 0x4f09;
/* regs.R_BL = 0; */
regs.R_CX = colors;
regs.R_DX = start;
regs.R_ES = X86BIOS_PHYSTOSEG(offs);
regs.R_DI = X86BIOS_PHYSTOOFF(offs);
bits = 8 - bits;
for (i = 0; i < colors; ++i) {
p[i * 4] = b[i] >> bits;
p[i * 4 + 1] = g[i] >> bits;
p[i * 4 + 2] = r[i] >> bits;
p[i * 4 + 3] = 0;
}
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_free(p, colors * 4);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (regs.R_AX != 0x004f);
}
static ssize_t
vesa_bios_state_buf_size(void)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f04;
/* regs.R_DL = STATE_SIZE; */
regs.R_CX = STATE_ALL;
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (regs.R_AX != 0x004f)
return (0);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (regs.R_BX * 64);
}
static int
vesa_bios_save_restore(int code, void *p, size_t size)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
uint32_t offs;
void *buf;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (code != STATE_SAVE && code != STATE_LOAD)
return (1);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
buf = x86bios_alloc(&offs, size);
x86bios_init_regs(&regs);
regs.R_AX = 0x4f04;
regs.R_DL = code;
regs.R_CX = STATE_ALL;
regs.R_ES = X86BIOS_PHYSTOSEG(offs);
regs.R_BX = X86BIOS_PHYSTOOFF(offs);
switch (code) {
case STATE_SAVE:
x86bios_intr(&regs, 0x10);
bcopy(buf, p, size);
break;
case STATE_LOAD:
bcopy(p, buf, size);
x86bios_intr(&regs, 0x10);
break;
}
x86bios_free(buf, size);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (regs.R_AX != 0x004f);
}
#if 0
static int
vesa_bios_get_line_length(void)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f06;
regs.R_BL = 1;
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (regs.R_AX != 0x004f)
return (-1);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (regs.R_BX);
}
#endif
static int
vesa_bios_set_line_length(int pixel, int *bytes, int *lines)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f06;
/* regs.R_BL = 0; */
regs.R_CX = pixel;
x86bios_intr(&regs, 0x10);
#if VESA_DEBUG > 1
printf("bx:%d, cx:%d, dx:%d\n", regs.R_BX, regs.R_CX, regs.R_DX);
#endif
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (regs.R_AX != 0x004f)
return (-1);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (bytes != NULL)
*bytes = regs.R_BX;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (lines != NULL)
*lines = regs.R_DX;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
#if 0
static int
vesa_bios_get_start(int *x, int *y)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f07;
regs.R_BL = 1;
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (regs.R_AX != 0x004f)
return (-1);
*x = regs.R_CX;
*y = regs.R_DX;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
#endif
static int
vesa_bios_set_start(int x, int y)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f07;
regs.R_BL = 0x80;
regs.R_CX = x;
regs.R_DX = y;
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (regs.R_AX != 0x004f);
}
/* map a generic video mode to a known mode */
static int
vesa_map_gen_mode_num(int type, int color, int mode)
{
static struct {
int from;
int to;
} mode_map[] = {
{ M_TEXT_132x25, M_VESA_C132x25 },
{ M_TEXT_132x43, M_VESA_C132x43 },
{ M_TEXT_132x50, M_VESA_C132x50 },
{ M_TEXT_132x60, M_VESA_C132x60 },
};
int i;
for (i = 0; i < sizeof(mode_map)/sizeof(mode_map[0]); ++i) {
if (mode_map[i].from == mode)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (mode_map[i].to);
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (mode);
}
static int
vesa_translate_flags(u_int16_t vflags)
{
static struct {
u_int16_t mask;
int set;
int reset;
} ftable[] = {
{ V_MODECOLOR, V_INFO_COLOR, 0 },
{ V_MODEGRAPHICS, V_INFO_GRAPHICS, 0 },
{ V_MODELFB, V_INFO_LINEAR, 0 },
{ V_MODENONVGA, V_INFO_NONVGA, 0 },
};
int flags;
int i;
for (flags = 0, i = 0; i < sizeof(ftable)/sizeof(ftable[0]); ++i) {
flags |= (vflags & ftable[i].mask) ?
ftable[i].set : ftable[i].reset;
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (flags);
}
static int
vesa_translate_mmodel(u_int8_t vmodel)
{
static struct {
u_int8_t vmodel;
int mmodel;
} mtable[] = {
{ V_MMTEXT, V_INFO_MM_TEXT },
{ V_MMCGA, V_INFO_MM_CGA },
{ V_MMHGC, V_INFO_MM_HGC },
{ V_MMEGA, V_INFO_MM_PLANAR },
{ V_MMPACKED, V_INFO_MM_PACKED },
{ V_MMDIRCOLOR, V_INFO_MM_DIRECT },
};
int i;
for (i = 0; mtable[i].mmodel >= 0; ++i) {
if (mtable[i].vmodel == vmodel)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (mtable[i].mmodel);
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (V_INFO_MM_OTHER);
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
#define VESA_MAXSTR 256
#define VESA_STRCPY(dst, src) do { \
char *str; \
int i; \
dst = malloc(VESA_MAXSTR, M_DEVBUF, M_WAITOK); \
str = x86bios_offset(BIOS_SADDRTOLADDR(src)); \
for (i = 0; i < VESA_MAXSTR - 1 && str[i] != '\0'; i++) \
dst[i] = str[i]; \
dst[i] = '\0'; \
} while (0)
static int
vesa_bios_init(void)
{
static struct vesa_info buf;
struct vesa_mode vmode;
video_info_t *p;
x86regs_t regs;
size_t bsize;
size_t msize;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
void *vmbuf;
uint32_t offs;
uint16_t vers;
int bpsl;
int is_via_cle266;
int modes;
int i;
if (vesa_init_done)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
has_vesa_bios = FALSE;
vesa_adp_info = NULL;
vesa_vmode_max = 0;
vesa_vmode[0].vi_mode = EOT;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
/*
* If the VBE real mode interrupt vector is not found, try BIOS POST.
*/
if (x86bios_get_intr(0x10) == 0) {
if (vesa_bios_post() != 0)
return (1);
if (bootverbose) {
offs = x86bios_get_intr(0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
printf("VESA: interrupt vector installed (0x%x)\n",
BIOS_SADDRTOLADDR(offs));
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f00;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
vmbuf = x86bios_alloc(&offs, sizeof(buf));
if (vmbuf == NULL)
return (1);
regs.R_ES = X86BIOS_PHYSTOSEG(offs);
regs.R_DI = X86BIOS_PHYSTOOFF(offs);
bcopy("VBE2", vmbuf, 4); /* try for VBE2 data */
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (regs.R_AX != 0x004f || bcmp("VESA", vmbuf, 4) != 0)
goto fail;
bcopy(vmbuf, &buf, sizeof(buf));
vesa_adp_info = &buf;
if (bootverbose) {
printf("VESA: information block\n");
hexdump(&buf, sizeof(buf), NULL, HD_OMIT_CHARS);
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
vers = buf.v_version = le16toh(buf.v_version);
buf.v_oemstr = le32toh(buf.v_oemstr);
buf.v_flags = le32toh(buf.v_flags);
buf.v_modetable = le32toh(buf.v_modetable);
buf.v_memsize = le16toh(buf.v_memsize);
buf.v_revision = le16toh(buf.v_revision);
buf.v_venderstr = le32toh(buf.v_venderstr);
buf.v_prodstr = le32toh(buf.v_prodstr);
buf.v_revstr = le32toh(buf.v_revstr);
if (vers < 0x0102) {
printf("VESA: VBE version %d.%d is not supported; "
"version 1.2 or later is required.\n",
((vers & 0xf000) >> 12) * 10 + ((vers & 0x0f00) >> 8),
((vers & 0x00f0) >> 4) * 10 + (vers & 0x000f));
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
VESA_STRCPY(vesa_oemstr, buf.v_oemstr);
if (vers >= 0x0200) {
VESA_STRCPY(vesa_venderstr, buf.v_venderstr);
VESA_STRCPY(vesa_prodstr, buf.v_prodstr);
VESA_STRCPY(vesa_revstr, buf.v_revstr);
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
is_via_cle266 = strncmp(vesa_oemstr, VESA_VIA_CLE266,
sizeof(VESA_VIA_CLE266)) == 0;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (buf.v_modetable == 0)
goto fail;
msize = (size_t)buf.v_memsize * 64 * 1024;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
vesa_vmodetab = x86bios_offset(BIOS_SADDRTOLADDR(buf.v_modetable));
for (i = 0, modes = 0; (i < (M_VESA_MODE_MAX - M_VESA_BASE + 1)) &&
(vesa_vmodetab[i] != 0xffff); ++i) {
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
vesa_vmodetab[i] = le16toh(vesa_vmodetab[i]);
if (vesa_bios_get_mode(vesa_vmodetab[i], &vmode))
continue;
vmode.v_modeattr = le16toh(vmode.v_modeattr);
vmode.v_wgran = le16toh(vmode.v_wgran);
vmode.v_wsize = le16toh(vmode.v_wsize);
vmode.v_waseg = le16toh(vmode.v_waseg);
vmode.v_wbseg = le16toh(vmode.v_wbseg);
vmode.v_posfunc = le32toh(vmode.v_posfunc);
vmode.v_bpscanline = le16toh(vmode.v_bpscanline);
vmode.v_width = le16toh(vmode.v_width);
vmode.v_height = le16toh(vmode.v_height);
vmode.v_lfb = le32toh(vmode.v_lfb);
vmode.v_offscreen = le32toh(vmode.v_offscreen);
vmode.v_offscreensize = le16toh(vmode.v_offscreensize);
vmode.v_linbpscanline = le16toh(vmode.v_linbpscanline);
vmode.v_maxpixelclock = le32toh(vmode.v_maxpixelclock);
/* reject unsupported modes */
#if 0
if ((vmode.v_modeattr &
(V_MODESUPP | V_MODEOPTINFO | V_MODENONVGA)) !=
(V_MODESUPP | V_MODEOPTINFO))
continue;
#else
if ((vmode.v_modeattr & V_MODEOPTINFO) == 0) {
#if VESA_DEBUG > 1
printf("Rejecting VESA %s mode: %d x %d x %d bpp "
" attr = %x\n",
vmode.v_modeattr & V_MODEGRAPHICS ?
"graphics" : "text",
vmode.v_width, vmode.v_height, vmode.v_bpp,
vmode.v_modeattr);
#endif
continue;
}
#endif
bpsl = (vmode.v_modeattr & V_MODELFB) != 0 && vers >= 0x0300 ?
vmode.v_linbpscanline : vmode.v_bpscanline;
bsize = bpsl * vmode.v_height;
if ((vmode.v_modeattr & V_MODEGRAPHICS) != 0)
bsize *= vmode.v_planes;
/* Does it have enough memory to support this mode? */
if (msize < bsize) {
#if VESA_DEBUG > 1
printf("Rejecting VESA %s mode: %d x %d x %d bpp "
" attr = %x, not enough memory\n",
vmode.v_modeattr & V_MODEGRAPHICS ?
"graphics" : "text",
vmode.v_width, vmode.v_height, vmode.v_bpp,
vmode.v_modeattr);
#endif
continue;
}
/* expand the array if necessary */
if (modes >= vesa_vmode_max) {
vesa_vmode_max += MODE_TABLE_DELTA;
p = malloc(sizeof(*vesa_vmode) * (vesa_vmode_max + 1),
M_DEVBUF, M_WAITOK);
#if VESA_DEBUG > 1
printf("vesa_bios_init(): modes:%d, vesa_mode_max:%d\n",
modes, vesa_vmode_max);
#endif
if (modes > 0) {
bcopy(vesa_vmode, p, sizeof(*vesa_vmode)*modes);
free(vesa_vmode, M_DEVBUF);
}
vesa_vmode = p;
}
#if VESA_DEBUG > 1
printf("Found VESA %s mode: %d x %d x %d bpp\n",
vmode.v_modeattr & V_MODEGRAPHICS ? "graphics" : "text",
vmode.v_width, vmode.v_height, vmode.v_bpp);
#endif
if (is_via_cle266) {
if ((vmode.v_width & 0xff00) >> 8 == vmode.v_height - 1) {
vmode.v_width &= 0xff;
vmode.v_waseg = 0xb8000 >> 4;
}
}
/* copy some fields */
bzero(&vesa_vmode[modes], sizeof(vesa_vmode[modes]));
vesa_vmode[modes].vi_mode = vesa_vmodetab[i];
vesa_vmode[modes].vi_width = vmode.v_width;
vesa_vmode[modes].vi_height = vmode.v_height;
vesa_vmode[modes].vi_depth = vmode.v_bpp;
vesa_vmode[modes].vi_planes = vmode.v_planes;
vesa_vmode[modes].vi_cwidth = vmode.v_cwidth;
vesa_vmode[modes].vi_cheight = vmode.v_cheight;
vesa_vmode[modes].vi_window = (vm_offset_t)vmode.v_waseg << 4;
/* XXX window B */
vesa_vmode[modes].vi_window_size = vmode.v_wsize * 1024;
vesa_vmode[modes].vi_window_gran = vmode.v_wgran * 1024;
if (vmode.v_modeattr & V_MODELFB)
vesa_vmode[modes].vi_buffer = vmode.v_lfb;
vesa_vmode[modes].vi_buffer_size = bsize;
vesa_vmode[modes].vi_mem_model =
vesa_translate_mmodel(vmode.v_memmodel);
switch (vesa_vmode[modes].vi_mem_model) {
case V_INFO_MM_DIRECT:
if ((vmode.v_modeattr & V_MODELFB) != 0 &&
vers >= 0x0300) {
vesa_vmode[modes].vi_pixel_fields[0] =
vmode.v_linredfieldpos;
vesa_vmode[modes].vi_pixel_fields[1] =
vmode.v_lingreenfieldpos;
vesa_vmode[modes].vi_pixel_fields[2] =
vmode.v_linbluefieldpos;
vesa_vmode[modes].vi_pixel_fields[3] =
vmode.v_linresfieldpos;
vesa_vmode[modes].vi_pixel_fsizes[0] =
vmode.v_linredmasksize;
vesa_vmode[modes].vi_pixel_fsizes[1] =
vmode.v_lingreenmasksize;
vesa_vmode[modes].vi_pixel_fsizes[2] =
vmode.v_linbluemasksize;
vesa_vmode[modes].vi_pixel_fsizes[3] =
vmode.v_linresmasksize;
} else {
vesa_vmode[modes].vi_pixel_fields[0] =
vmode.v_redfieldpos;
vesa_vmode[modes].vi_pixel_fields[1] =
vmode.v_greenfieldpos;
vesa_vmode[modes].vi_pixel_fields[2] =
vmode.v_bluefieldpos;
vesa_vmode[modes].vi_pixel_fields[3] =
vmode.v_resfieldpos;
vesa_vmode[modes].vi_pixel_fsizes[0] =
vmode.v_redmasksize;
vesa_vmode[modes].vi_pixel_fsizes[1] =
vmode.v_greenmasksize;
vesa_vmode[modes].vi_pixel_fsizes[2] =
vmode.v_bluemasksize;
vesa_vmode[modes].vi_pixel_fsizes[3] =
vmode.v_resmasksize;
}
/* FALLTHROUGH */
case V_INFO_MM_PACKED:
vesa_vmode[modes].vi_pixel_size = (vmode.v_bpp + 7) / 8;
break;
}
vesa_vmode[modes].vi_flags =
vesa_translate_flags(vmode.v_modeattr) | V_INFO_VESA;
++modes;
}
vesa_vmode[modes].vi_mode = EOT;
if (bootverbose)
printf("VESA: %d mode(s) found\n", modes);
has_vesa_bios = (modes > 0);
if (!has_vesa_bios)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
goto fail;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_free(vmbuf, sizeof(buf));
return (0);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
fail:
if (vmbuf != NULL)
x86bios_free(vmbuf, sizeof(buf));
if (vesa_oemstr != NULL) {
free(vesa_oemstr, M_DEVBUF);
vesa_oemstr = NULL;
}
if (vesa_venderstr != NULL) {
free(vesa_venderstr, M_DEVBUF);
vesa_venderstr = NULL;
}
if (vesa_prodstr != NULL) {
free(vesa_prodstr, M_DEVBUF);
vesa_prodstr = NULL;
}
if (vesa_revstr != NULL) {
free(vesa_revstr, M_DEVBUF);
vesa_revstr = NULL;
}
return (1);
}
static void
vesa_clear_modes(video_info_t *info, int color)
{
while (info->vi_mode != EOT) {
if ((info->vi_flags & V_INFO_COLOR) != color)
info->vi_mode = NA;
++info;
}
}
/* entry points */
static int
vesa_configure(int flags)
{
video_adapter_t *adp;
int adapters;
int error;
int i;
if (vesa_init_done)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
if (flags & VIO_PROBE_ONLY)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
/*
* If the VESA module has already been loaded, abort loading
* the module this time.
*/
for (i = 0; (adp = vid_get_adapter(i)) != NULL; ++i) {
if (adp->va_flags & V_ADP_VESA)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (ENXIO);
if (adp->va_type == KD_VGA)
break;
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
/*
* The VGA adapter is not found. This is because either
* 1) the VGA driver has not been initialized, or 2) the VGA card
* is not present. If 1) is the case, we shall defer
* initialization for now and try again later.
*/
if (adp == NULL) {
vga_sub_configure = vesa_configure;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (ENODEV);
}
/* count number of registered adapters */
for (++i; vid_get_adapter(i) != NULL; ++i)
;
adapters = i;
/* call VESA BIOS */
vesa_adp = adp;
if (vesa_bios_init()) {
vesa_adp = NULL;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (ENXIO);
}
vesa_adp->va_flags |= V_ADP_VESA;
/* remove conflicting modes if we have more than one adapter */
if (adapters > 1) {
vesa_clear_modes(vesa_vmode,
(vesa_adp->va_flags & V_ADP_COLOR) ?
V_INFO_COLOR : 0);
}
if ((error = vesa_load_ioctl()) == 0) {
prevvidsw = vidsw[vesa_adp->va_index];
vidsw[vesa_adp->va_index] = &vesavidsw;
vesa_init_done = TRUE;
} else {
vesa_adp = NULL;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (error);
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
#if 0
static int
vesa_nop(void)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
#endif
static int
vesa_error(void)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
}
static int
vesa_probe(int unit, video_adapter_t **adpp, void *arg, int flags)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->probe)(unit, adpp, arg, flags));
}
static int
vesa_init(int unit, video_adapter_t *adp, int flags)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->init)(unit, adp, flags));
}
static int
vesa_get_info(video_adapter_t *adp, int mode, video_info_t *info)
{
int i;
if ((*prevvidsw->get_info)(adp, mode, info) == 0)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
if (adp != vesa_adp)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
mode = vesa_map_gen_mode_num(vesa_adp->va_type,
vesa_adp->va_flags & V_ADP_COLOR, mode);
for (i = 0; vesa_vmode[i].vi_mode != EOT; ++i) {
if (vesa_vmode[i].vi_mode == NA)
continue;
if (vesa_vmode[i].vi_mode == mode) {
*info = vesa_vmode[i];
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
}
static int
vesa_query_mode(video_adapter_t *adp, video_info_t *info)
{
int i;
if ((*prevvidsw->query_mode)(adp, info) == 0)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
if (adp != vesa_adp)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (ENODEV);
for (i = 0; vesa_vmode[i].vi_mode != EOT; ++i) {
if ((info->vi_width != 0)
&& (info->vi_width != vesa_vmode[i].vi_width))
continue;
if ((info->vi_height != 0)
&& (info->vi_height != vesa_vmode[i].vi_height))
continue;
if ((info->vi_cwidth != 0)
&& (info->vi_cwidth != vesa_vmode[i].vi_cwidth))
continue;
if ((info->vi_cheight != 0)
&& (info->vi_cheight != vesa_vmode[i].vi_cheight))
continue;
if ((info->vi_depth != 0)
&& (info->vi_depth != vesa_vmode[i].vi_depth))
continue;
if ((info->vi_planes != 0)
&& (info->vi_planes != vesa_vmode[i].vi_planes))
continue;
/* pixel format, memory model */
if ((info->vi_flags != 0)
&& (info->vi_flags != vesa_vmode[i].vi_flags))
continue;
*info = vesa_vmode[i];
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (ENODEV);
}
static int
vesa_set_mode(video_adapter_t *adp, int mode)
{
video_info_t info;
if (adp != vesa_adp)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->set_mode)(adp, mode));
mode = vesa_map_gen_mode_num(adp->va_type,
adp->va_flags & V_ADP_COLOR, mode);
#if VESA_DEBUG > 0
printf("VESA: set_mode(): %d(%x) -> %d(%x)\n",
adp->va_mode, adp->va_mode, mode, mode);
#endif
/*
* If the current mode is a VESA mode and the new mode is not,
* restore the state of the adapter first by setting one of the
* standard VGA mode, so that non-standard, extended SVGA registers
* are set to the state compatible with the standard VGA modes.
* Otherwise (*prevvidsw->set_mode)() may not be able to set up
* the new mode correctly.
*/
if (VESA_MODE(adp->va_mode)) {
if (!VESA_MODE(mode) &&
(*prevvidsw->get_info)(adp, mode, &info) == 0) {
if ((adp->va_flags & V_ADP_DAC8) != 0) {
vesa_bios_set_dac(6);
adp->va_flags &= ~V_ADP_DAC8;
}
int10_set_mode(adp->va_initial_bios_mode);
if (adp->va_info.vi_flags & V_INFO_LINEAR)
pmap_unmapdev(adp->va_buffer,
vesa_adp_info->v_memsize * 64 * 1024);
/*
* Once (*prevvidsw->get_info)() succeeded,
* (*prevvidsw->set_mode)() below won't fail...
*/
}
}
/* we may not need to handle this mode after all... */
if (!VESA_MODE(mode) && (*prevvidsw->set_mode)(adp, mode) == 0)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
/* is the new mode supported? */
if (vesa_get_info(adp, mode, &info))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
/* assert(VESA_MODE(mode)); */
#if VESA_DEBUG > 0
printf("VESA: about to set a VESA mode...\n");
#endif
/* don't use the linear frame buffer for text modes. XXX */
if (!(info.vi_flags & V_INFO_GRAPHICS))
info.vi_flags &= ~V_INFO_LINEAR;
if (vesa_bios_set_mode(mode | ((info.vi_flags & V_INFO_LINEAR) ? 0x4000 : 0)))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
/* Palette format is reset by the above VBE function call. */
adp->va_flags &= ~V_ADP_DAC8;
if ((vesa_adp_info->v_flags & V_DAC8) != 0 &&
(info.vi_flags & V_INFO_GRAPHICS) != 0 &&
(info.vi_flags & V_INFO_NONVGA) != 0 &&
vesa_bios_set_dac(8) > 6)
adp->va_flags |= V_ADP_DAC8;
if (adp->va_info.vi_flags & V_INFO_LINEAR)
pmap_unmapdev(adp->va_buffer,
vesa_adp_info->v_memsize * 64 * 1024);
#if VESA_DEBUG > 0
printf("VESA: mode set!\n");
#endif
vesa_adp->va_mode = mode;
vesa_adp->va_flags &= ~V_ADP_COLOR;
vesa_adp->va_flags |=
(info.vi_flags & V_INFO_COLOR) ? V_ADP_COLOR : 0;
vesa_adp->va_crtc_addr =
(vesa_adp->va_flags & V_ADP_COLOR) ? COLOR_CRTC : MONO_CRTC;
if (info.vi_flags & V_INFO_LINEAR) {
#if VESA_DEBUG > 1
printf("VESA: setting up LFB\n");
#endif
vesa_adp->va_buffer =
(vm_offset_t)pmap_mapdev_attr(info.vi_buffer,
vesa_adp_info->v_memsize * 64 * 1024, PAT_WRITE_COMBINING);
vesa_adp->va_window = vesa_adp->va_buffer;
vesa_adp->va_window_size = info.vi_buffer_size / info.vi_planes;
vesa_adp->va_window_gran = info.vi_buffer_size / info.vi_planes;
} else {
vesa_adp->va_buffer = 0;
vesa_adp->va_window = (vm_offset_t)x86bios_offset(info.vi_window);
vesa_adp->va_window_size = info.vi_window_size;
vesa_adp->va_window_gran = info.vi_window_gran;
}
vesa_adp->va_buffer_size = info.vi_buffer_size;
vesa_adp->va_window_orig = 0;
vesa_adp->va_line_width = info.vi_buffer_size / info.vi_height;
if ((info.vi_flags & V_INFO_GRAPHICS) != 0)
vesa_adp->va_line_width /= info.vi_planes;
vesa_adp->va_disp_start.x = 0;
vesa_adp->va_disp_start.y = 0;
#if VESA_DEBUG > 0
printf("vesa_set_mode(): vi_width:%d, line_width:%d\n",
info.vi_width, vesa_adp->va_line_width);
#endif
bcopy(&info, &vesa_adp->va_info, sizeof(vesa_adp->va_info));
/* move hardware cursor out of the way */
(*vidsw[vesa_adp->va_index]->set_hw_cursor)(vesa_adp, -1, -1);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
static int
vesa_save_font(video_adapter_t *adp, int page, int fontsize, int fontwidth,
u_char *data, int ch, int count)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->save_font)(adp, page, fontsize, fontwidth, data,
ch, count));
}
static int
vesa_load_font(video_adapter_t *adp, int page, int fontsize, int fontwidth,
u_char *data, int ch, int count)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->load_font)(adp, page, fontsize, fontwidth, data,
ch, count));
}
static int
vesa_show_font(video_adapter_t *adp, int page)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->show_font)(adp, page));
}
static int
vesa_save_palette(video_adapter_t *adp, u_char *palette)
{
int bits;
if (adp == vesa_adp && VESA_MODE(adp->va_mode) &&
(adp->va_info.vi_flags & V_INFO_NONVGA) != 0) {
bits = (adp->va_flags & V_ADP_DAC8) != 0 ? 8 : 6;
return (vesa_bios_save_palette(0, 256, palette, bits));
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->save_palette)(adp, palette));
}
static int
vesa_load_palette(video_adapter_t *adp, u_char *palette)
{
int bits;
if (adp == vesa_adp && VESA_MODE(adp->va_mode) &&
(adp->va_info.vi_flags & V_INFO_NONVGA) != 0) {
bits = (adp->va_flags & V_ADP_DAC8) != 0 ? 8 : 6;
return (vesa_bios_load_palette(0, 256, palette, bits));
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->load_palette)(adp, palette));
}
static int
vesa_set_border(video_adapter_t *adp, int color)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->set_border)(adp, color));
}
static int
vesa_save_state(video_adapter_t *adp, void *p, size_t size)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (adp != vesa_adp)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->save_state)(adp, p, size));
if (vesa_state_buf_size == -1) {
vesa_state_buf_size = vesa_bios_state_buf_size();
if (vesa_state_buf_size == 0)
return (1);
}
if (size == 0)
return (offsetof(adp_state_t, regs) + vesa_state_buf_size);
else if (size < (offsetof(adp_state_t, regs) + vesa_state_buf_size))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
((adp_state_t *)p)->sig = V_STATE_SIG;
bzero(((adp_state_t *)p)->regs, vesa_state_buf_size);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (vesa_bios_save_restore(STATE_SAVE, ((adp_state_t *)p)->regs,
vesa_state_buf_size));
}
static int
vesa_load_state(video_adapter_t *adp, void *p)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if ((adp != vesa_adp) || (((adp_state_t *)p)->sig != V_STATE_SIG))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->load_state)(adp, p));
if (vesa_state_buf_size <= 0)
return (1);
/* Try BIOS POST to restore a sane state. */
(void)vesa_bios_post();
(void)int10_set_mode(adp->va_initial_bios_mode);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (vesa_bios_save_restore(STATE_LOAD, ((adp_state_t *)p)->regs,
vesa_state_buf_size));
}
#if 0
static int
vesa_get_origin(video_adapter_t *adp, off_t *offset)
{
x86regs_t regs;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f05;
regs.R_BL = 0x10;
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (regs.R_AX != 0x004f)
return (1);
*offset = regs.DX * adp->va_window_gran;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
#endif
static int
vesa_set_origin(video_adapter_t *adp, off_t offset)
{
x86regs_t regs;
/*
* This function should return as quickly as possible to
* maintain good performance of the system. For this reason,
* error checking is kept minimal and let the VESA BIOS to
* detect error.
*/
if (adp != vesa_adp)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->set_win_org)(adp, offset));
/* if this is a linear frame buffer, do nothing */
if (adp->va_info.vi_flags & V_INFO_LINEAR)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
/* XXX */
if (adp->va_window_gran == 0)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f05;
regs.R_DX = offset / adp->va_window_gran;
x86bios_intr(&regs, 0x10);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (regs.R_AX != 0x004f)
return (1);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
x86bios_init_regs(&regs);
regs.R_AX = 0x4f05;
regs.R_BL = 1;
regs.R_DX = offset / adp->va_window_gran;
x86bios_intr(&regs, 0x10);
adp->va_window_orig = (offset/adp->va_window_gran)*adp->va_window_gran;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0); /* XXX */
}
static int
vesa_read_hw_cursor(video_adapter_t *adp, int *col, int *row)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->read_hw_cursor)(adp, col, row));
}
static int
vesa_set_hw_cursor(video_adapter_t *adp, int col, int row)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->set_hw_cursor)(adp, col, row));
}
static int
vesa_set_hw_cursor_shape(video_adapter_t *adp, int base, int height,
int celsize, int blink)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->set_hw_cursor_shape)(adp, base, height, celsize,
blink));
}
static int
vesa_blank_display(video_adapter_t *adp, int mode)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
/* XXX: use VESA DPMS */
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->blank_display)(adp, mode));
}
static int
vesa_mmap(video_adapter_t *adp, vm_ooffset_t offset, vm_paddr_t *paddr,
int prot, vm_memattr_t *memattr)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
#if VESA_DEBUG > 0
printf("vesa_mmap(): window:0x%tx, buffer:0x%tx, offset:0x%jx\n",
adp->va_info.vi_window, adp->va_info.vi_buffer, offset);
#endif
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if ((adp == vesa_adp) &&
(adp->va_info.vi_flags & V_INFO_LINEAR) != 0) {
/* va_window_size == va_buffer_size/vi_planes */
/* XXX: is this correct? */
if (offset > adp->va_window_size - PAGE_SIZE)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (-1);
*paddr = adp->va_info.vi_buffer + offset;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
return ((*prevvidsw->mmap)(adp, offset, paddr, prot, memattr));
}
static int
vesa_clear(video_adapter_t *adp)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->clear)(adp));
}
static int
vesa_fill_rect(video_adapter_t *adp, int val, int x, int y, int cx, int cy)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->fill_rect)(adp, val, x, y, cx, cy));
}
static int
vesa_bitblt(video_adapter_t *adp,...)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
/* FIXME */
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
}
static int
get_palette(video_adapter_t *adp, int base, int count,
u_char *red, u_char *green, u_char *blue, u_char *trans)
{
u_char *r;
u_char *g;
u_char *b;
int bits;
int error;
if (base < 0 || base >= 256 || count < 0 || count > 256)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
if ((base + count) > 256)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
if (!VESA_MODE(adp->va_mode))
return (1);
if ((adp->va_info.vi_flags & V_INFO_NONVGA) == 0)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
bits = (adp->va_flags & V_ADP_DAC8) != 0 ? 8 : 6;
r = malloc(count * 3, M_DEVBUF, M_WAITOK);
g = r + count;
b = g + count;
error = vesa_bios_save_palette2(base, count, r, g, b, bits);
if (error == 0) {
copyout(r, red, count);
copyout(g, green, count);
copyout(b, blue, count);
if (trans != NULL) {
bzero(r, count);
copyout(r, trans, count);
}
}
free(r, M_DEVBUF);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (error);
}
static int
set_palette(video_adapter_t *adp, int base, int count,
u_char *red, u_char *green, u_char *blue, u_char *trans)
{
u_char *r;
u_char *g;
u_char *b;
int bits;
int error;
if (base < 0 || base >= 256 || count < 0 || count > 256)
return (1);
if ((base + count) > 256)
return (1);
if (!VESA_MODE(adp->va_mode))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
if ((adp->va_info.vi_flags & V_INFO_NONVGA) == 0)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
bits = (adp->va_flags & V_ADP_DAC8) != 0 ? 8 : 6;
r = malloc(count * 3, M_DEVBUF, M_WAITOK);
g = r + count;
b = g + count;
copyin(red, r, count);
copyin(green, g, count);
copyin(blue, b, count);
error = vesa_bios_load_palette2(base, count, r, g, b, bits);
free(r, M_DEVBUF);
return (error);
}
static int
vesa_ioctl(video_adapter_t *adp, u_long cmd, caddr_t arg)
{
int bytes;
if (adp != vesa_adp)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->ioctl)(adp, cmd, arg));
switch (cmd) {
case FBIO_SETWINORG: /* set frame buffer window origin */
if (!VESA_MODE(adp->va_mode))
return (*prevvidsw->ioctl)(adp, cmd, arg);
return (vesa_set_origin(adp, *(off_t *)arg) ? ENODEV : 0);
case FBIO_SETDISPSTART: /* set display start address */
if (!VESA_MODE(adp->va_mode))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->ioctl)(adp, cmd, arg));
if (vesa_bios_set_start(((video_display_start_t *)arg)->x,
((video_display_start_t *)arg)->y))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (ENODEV);
adp->va_disp_start.x = ((video_display_start_t *)arg)->x;
adp->va_disp_start.y = ((video_display_start_t *)arg)->y;
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
case FBIO_SETLINEWIDTH: /* set line length in pixel */
if (!VESA_MODE(adp->va_mode))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->ioctl)(adp, cmd, arg));
if (vesa_bios_set_line_length(*(u_int *)arg, &bytes, NULL))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (ENODEV);
adp->va_line_width = bytes;
#if VESA_DEBUG > 1
printf("new line width:%d\n", adp->va_line_width);
#endif
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
case FBIO_GETPALETTE: /* get color palette */
if (get_palette(adp, ((video_color_palette_t *)arg)->index,
((video_color_palette_t *)arg)->count,
((video_color_palette_t *)arg)->red,
((video_color_palette_t *)arg)->green,
((video_color_palette_t *)arg)->blue,
((video_color_palette_t *)arg)->transparent))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->ioctl)(adp, cmd, arg));
return (0);
case FBIO_SETPALETTE: /* set color palette */
if (set_palette(adp, ((video_color_palette_t *)arg)->index,
((video_color_palette_t *)arg)->count,
((video_color_palette_t *)arg)->red,
((video_color_palette_t *)arg)->green,
((video_color_palette_t *)arg)->blue,
((video_color_palette_t *)arg)->transparent))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->ioctl)(adp, cmd, arg));
return (0);
case FBIOGETCMAP: /* get color palette */
if (get_palette(adp, ((struct fbcmap *)arg)->index,
((struct fbcmap *)arg)->count,
((struct fbcmap *)arg)->red,
((struct fbcmap *)arg)->green,
((struct fbcmap *)arg)->blue, NULL))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->ioctl)(adp, cmd, arg));
return (0);
case FBIOPUTCMAP: /* set color palette */
if (set_palette(adp, ((struct fbcmap *)arg)->index,
((struct fbcmap *)arg)->count,
((struct fbcmap *)arg)->red,
((struct fbcmap *)arg)->green,
((struct fbcmap *)arg)->blue, NULL))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->ioctl)(adp, cmd, arg));
return (0);
default:
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return ((*prevvidsw->ioctl)(adp, cmd, arg));
}
}
static int
vesa_diag(video_adapter_t *adp, int level)
{
int error;
/* call the previous handler first */
error = (*prevvidsw->diag)(adp, level);
if (error)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (error);
if (adp != vesa_adp)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (1);
if (level <= 0)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
static int
vesa_bios_info(int level)
{
#if VESA_DEBUG > 1
struct vesa_mode vmode;
int i;
#endif
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
uint16_t vers;
vers = vesa_adp_info->v_version;
if (bootverbose) {
/* general adapter information */
printf(
"VESA: v%d.%d, %dk memory, flags:0x%x, mode table:%p (%x)\n",
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
(vers >> 12) * 10 + ((vers & 0x0f00) >> 8),
((vers & 0x00f0) >> 4) * 10 + (vers & 0x000f),
vesa_adp_info->v_memsize * 64, vesa_adp_info->v_flags,
vesa_vmodetab, vesa_adp_info->v_modetable);
/* OEM string */
if (vesa_oemstr != NULL)
printf("VESA: %s\n", vesa_oemstr);
}
if (level <= 0)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (vers >= 0x0200 && bootverbose) {
/* vender name, product name, product revision */
printf("VESA: %s %s %s\n",
(vesa_venderstr != NULL) ? vesa_venderstr : "unknown",
(vesa_prodstr != NULL) ? vesa_prodstr : "unknown",
(vesa_revstr != NULL) ? vesa_revstr : "?");
}
#if VESA_DEBUG > 1
/* mode information */
for (i = 0;
(i < (M_VESA_MODE_MAX - M_VESA_BASE + 1))
&& (vesa_vmodetab[i] != 0xffff); ++i) {
if (vesa_bios_get_mode(vesa_vmodetab[i], &vmode))
continue;
/* print something for diagnostic purpose */
printf("VESA: mode:0x%03x, flags:0x%04x",
vesa_vmodetab[i], vmode.v_modeattr);
if (vmode.v_modeattr & V_MODEOPTINFO) {
if (vmode.v_modeattr & V_MODEGRAPHICS) {
printf(", G %dx%dx%d %d, ",
vmode.v_width, vmode.v_height,
vmode.v_bpp, vmode.v_planes);
} else {
printf(", T %dx%d, ",
vmode.v_width, vmode.v_height);
}
printf("font:%dx%d, ",
vmode.v_cwidth, vmode.v_cheight);
printf("pages:%d, mem:%d",
vmode.v_ipages + 1, vmode.v_memmodel);
}
if (vmode.v_modeattr & V_MODELFB) {
printf("\nVESA: LFB:0x%x, off:0x%x, off_size:0x%x",
vmode.v_lfb, vmode.v_offscreen,
vmode.v_offscreensize*1024);
}
printf("\n");
printf("VESA: window A:0x%x (%x), window B:0x%x (%x), ",
vmode.v_waseg, vmode.v_waattr,
vmode.v_wbseg, vmode.v_wbattr);
printf("size:%dk, gran:%dk\n",
vmode.v_wsize, vmode.v_wgran);
}
#endif /* VESA_DEBUG > 1 */
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
}
/* module loading */
static int
vesa_load(void)
{
int error;
int s;
if (vesa_init_done)
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (0);
/* locate a VGA adapter */
s = spltty();
vesa_adp = NULL;
error = vesa_configure(0);
splx(s);
if (error == 0)
vesa_bios_info(bootverbose);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (error);
}
static int
vesa_unload(void)
{
u_char palette[256*3];
int error;
int s;
/* if the adapter is currently in a VESA mode, don't unload */
if ((vesa_adp != NULL) && VESA_MODE(vesa_adp->va_mode))
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (EBUSY);
/*
* FIXME: if there is at least one vty which is in a VESA mode,
* we shouldn't be unloading! XXX
*/
s = spltty();
if ((error = vesa_unload_ioctl()) == 0) {
if (vesa_adp != NULL) {
if ((vesa_adp->va_flags & V_ADP_DAC8) != 0) {
vesa_bios_save_palette(0, 256, palette, 8);
vesa_bios_set_dac(6);
vesa_adp->va_flags &= ~V_ADP_DAC8;
vesa_bios_load_palette(0, 256, palette, 6);
}
vesa_adp->va_flags &= ~V_ADP_VESA;
vidsw[vesa_adp->va_index] = prevvidsw;
}
}
splx(s);
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
if (vesa_oemstr != NULL)
free(vesa_oemstr, M_DEVBUF);
if (vesa_venderstr != NULL)
free(vesa_venderstr, M_DEVBUF);
if (vesa_prodstr != NULL)
free(vesa_prodstr, M_DEVBUF);
if (vesa_revstr != NULL)
free(vesa_revstr, M_DEVBUF);
if (vesa_vmode != &vesa_vmode_empty)
free(vesa_vmode, M_DEVBUF);
return (error);
}
static int
vesa_mod_event(module_t mod, int type, void *data)
{
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
switch (type) {
case MOD_LOAD:
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (vesa_load());
case MOD_UNLOAD:
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (vesa_unload());
}
Rewrite x86bios and update its dependent drivers. - Do not map entire real mode memory (1MB). Instead, we map IVT/BDA and ROM area separately. Most notably, ROM area is mapped as device memory (uncacheable) as it should be. User memory is dynamically allocated and free'ed with contigmalloc(9) and contigfree(9). Remove now redundant and potentially dangerous x86bios_alloc.c. If this emulator ever grows to support non-PC hardware, we may implement it with rman(9) later. - Move all host-specific initializations from x86emu_util.c to x86bios.c and remove now unnecessary x86emu_util.c. Currently, non-PC hardware is not supported. We may use bus_space(9) later when the KPI is fixed. - Replace all bzero() calls for emulated registers with more obviously named x86bios_init_regs(). This function also initializes DS and SS properly. - Add x86bios_get_intr(). This function checks if the interrupt vector is available for the platform. It is not necessary for PC-compatible hardware but it may be needed later. ;-) - Do not try turning off monitor if DPMS does not support the state. - Allocate stable memory for VESA OEM strings instead of just holding pointers to them. They may or may not be accessible always. Fix a memory leak of video mode table while I am here. - Add (experimental) BIOS POST call for vesa(4). This function calls VGA BIOS POST code from the current VGA option ROM. Some video controllers cannot save and restore the state properly even if it is claimed to be supported. Usually the symptom is blank display after resuming from suspend state. If the video mode does not match the previous mode after restoring, we try BIOS POST and force the known good initial state. Some magic was taken from NetBSD (and it was taken from vbetool, I believe.) - Add a loader tunable for vgapci(4) to give a hint to dpms(4) and vesa(4) to identify who owns the VESA BIOS. This is very useful for multi-display adapter setup. By default, the POST video controller is automatically probed and the tunable "hw.pci.default_vgapci_unit" is set to corresponding vgapci unit number. You may override it from loader but it is very unlikely to be necessary. Unfortunately only AGP/PCI/PCI-E controllers can be matched because ISA controller does not have necessary device IDs. - Fix a long standing bug in state save/restore function. The state buffer pointer should be ES:BX, not ES:DI according to VBE 3.0. If it ever worked, that's because BX was always zero. :-) - Clean up register initializations more clearer per VBE 3.0. - Fix a lot of style issues with vesa(4).
2009-10-19 20:58:10 +00:00
return (EOPNOTSUPP);
}
static moduledata_t vesa_mod = {
"vesa",
vesa_mod_event,
NULL,
};
DECLARE_MODULE(vesa, vesa_mod, SI_SUB_DRIVERS, SI_ORDER_MIDDLE);
MODULE_DEPEND(vesa, x86bios, 1, 1, 1);
#endif /* VGA_NO_MODE_CHANGE */