d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
77e5d907d2
freebsd-skq/sys/mips/conf/DB120

53 lines
1.1 KiB
Plaintext
Raw Normal View History

Add some initial board support for the AR934x and the Qualcomm Atheros DB120 development board. The AR934x SoCs are a MIPS74k based system with increased RAM addressing space, some scratch-pad RAM, an improved gige switch PHY and 2x2 or 3x3 on-board dual-band wifi. This support isn't complete by any stretch; it's just enough to bring the board up for others to tinker with. Notably, the MIPS74k support is broken. However it boots enough to echo some basic probe/attach messages, before dying somewhere in the TLB code. Thankyou to Qualcomm Atheros for their continued support of me doing open source work with their hardware. Tested: * AR9344, mips74k
2013-07-21 04:00:48 +00:00
#
# DB120 - the AR9344 SoC reference design
#
# $FreeBSD$
#
# Include the default AR934x parameters
include "AR934X_BASE"
ident DB120
# Override hints with board values
hints "DB120.hints"
# Force the board memory - the base DB120 has 128MB RAM
Yes, this board has 128mb of RAM.
2013-10-16 04:16:54 +00:00
options AR71XX_REALMEM=(128*1024*1024)
Add some initial board support for the AR934x and the Qualcomm Atheros DB120 development board. The AR934x SoCs are a MIPS74k based system with increased RAM addressing space, some scratch-pad RAM, an improved gige switch PHY and 2x2 or 3x3 on-board dual-band wifi. This support isn't complete by any stretch; it's just enough to bring the board up for others to tinker with. Notably, the MIPS74k support is broken. However it boots enough to echo some basic probe/attach messages, before dying somewhere in the TLB code. Thankyou to Qualcomm Atheros for their continued support of me doing open source work with their hardware. Tested: * AR9344, mips74k
2013-07-21 04:00:48 +00:00
# i2c GPIO bus
#device gpioiic
#device iicbb
#device iicbus
#device iic
# Options required for miiproxy and mdiobus
options ARGE_MDIO # Export an MDIO bus separate from arge
device miiproxy # MDIO bus <-> MII PHY rendezvous
device etherswitch
device arswitch
# read MSDOS formatted disks - USB
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
#options MSDOSFS
Add some initial board support for the AR934x and the Qualcomm Atheros DB120 development board. The AR934x SoCs are a MIPS74k based system with increased RAM addressing space, some scratch-pad RAM, an improved gige switch PHY and 2x2 or 3x3 on-board dual-band wifi. This support isn't complete by any stretch; it's just enough to bring the board up for others to tinker with. Notably, the MIPS74k support is broken. However it boots enough to echo some basic probe/attach messages, before dying somewhere in the TLB code. Thankyou to Qualcomm Atheros for their continued support of me doing open source work with their hardware. Tested: * AR9344, mips74k
2013-07-21 04:00:48 +00:00
# Enable the uboot environment stuff rather then the
# redboot stuff.
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options AR71XX_ENV_UBOOT
Add some initial board support for the AR934x and the Qualcomm Atheros DB120 development board. The AR934x SoCs are a MIPS74k based system with increased RAM addressing space, some scratch-pad RAM, an improved gige switch PHY and 2x2 or 3x3 on-board dual-band wifi. This support isn't complete by any stretch; it's just enough to bring the board up for others to tinker with. Notably, the MIPS74k support is broken. However it boots enough to echo some basic probe/attach messages, before dying somewhere in the TLB code. Thankyou to Qualcomm Atheros for their continued support of me doing open source work with their hardware. Tested: * AR9344, mips74k
2013-07-21 04:00:48 +00:00
# uzip - to boot natively from flash
device geom_uncompress
options GEOM_UNCOMPRESS
# Used for the static uboot partition map
device geom_map
Enable use of the PCIe connected wifi on the DB120 (AR9344) board. The on-board NIC is an 3x3 AR9380 with 5GHz only. * enable pci code in AR9344_BASE * enable ath_pci and the firmware loading bits in DB120 * add in the relevant hints in DB120.hints to inform the probe/attach code where the PCIe fixup data is for the onboard chip. This is only relevant for a default development board. I also have a DB120 with the on-board PCIe wifi NIC disabled and it's exposed as a real PCIe slot (to put normal PCIe NICs in); the fixup code will need to be disabled to make this work correctly. Tested: * DB120
2014-02-14 05:25:15 +00:00
# yes, this board has a PCI connected atheros device
device ath_pci
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options AR71XX_ATH_EEPROM
Enable use of the PCIe connected wifi on the DB120 (AR9344) board. The on-board NIC is an 3x3 AR9380 with 5GHz only. * enable pci code in AR9344_BASE * enable ath_pci and the firmware loading bits in DB120 * add in the relevant hints in DB120.hints to inform the probe/attach code where the PCIe fixup data is for the onboard chip. This is only relevant for a default development board. I also have a DB120 with the on-board PCIe wifi NIC disabled and it's exposed as a real PCIe slot (to put normal PCIe NICs in); the fixup code will need to be disabled to make this work correctly. Tested: * DB120
2014-02-14 05:25:15 +00:00
device firmware # Used by the above
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options ATH_EEPROM_FIRMWARE
Enable use of the PCIe connected wifi on the DB120 (AR9344) board. The on-board NIC is an 3x3 AR9380 with 5GHz only. * enable pci code in AR9344_BASE * enable ath_pci and the firmware loading bits in DB120 * add in the relevant hints in DB120.hints to inform the probe/attach code where the PCIe fixup data is for the onboard chip. This is only relevant for a default development board. I also have a DB120 with the on-board PCIe wifi NIC disabled and it's exposed as a real PCIe slot (to put normal PCIe NICs in); the fixup code will need to be disabled to make this work correctly. Tested: * DB120
2014-02-14 05:25:15 +00:00
Add some initial board support for the AR934x and the Qualcomm Atheros DB120 development board. The AR934x SoCs are a MIPS74k based system with increased RAM addressing space, some scratch-pad RAM, an improved gige switch PHY and 2x2 or 3x3 on-board dual-band wifi. This support isn't complete by any stretch; it's just enough to bring the board up for others to tinker with. Notably, the MIPS74k support is broken. However it boots enough to echo some basic probe/attach messages, before dying somewhere in the TLB code. Thankyou to Qualcomm Atheros for their continued support of me doing open source work with their hardware. Tested: * AR9344, mips74k
2013-07-21 04:00:48 +00:00
# Boot off of the rootfs, as defined in the geom_map setup.
In kernel config files, it is supposed to be 'options<space><tab>' not 'options<tab><tab>', per long standing (but recently not so strictly enforced) convention.
2014-03-18 14:41:18 +00:00
options ROOTDEVNAME=\"ufs:map/rootfs.uncompress\"
Reference in New Issue Copy Permalink