freebsd-skq/sys/dev/pccbb/pccbb.c

1947 lines
57 KiB
C
Raw Normal View History

/*
* Copyright (c) 2000,2001 Jonathan Chen.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
/*
* Copyright (c) 1998, 1999 and 2000
* HAYAKAWA Koichi. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by HAYAKAWA Koichi.
* 4. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Driver for PCI to Cardbus Bridge chips
*
* References:
* TI Datasheets:
* http://www-s.ti.com/cgi-bin/sc/generic2.cgi?family=PCI+CARDBUS+CONTROLLERS
*
* Written by Jonathan Chen <jon@freebsd.org>
* The author would like to acknowledge:
* * HAYAKAWA Koichi: Author of the NetBSD code for the same thing
* * Warner Losh: Newbus/newcard guru and author of the pccard side of things
* * YAMAMOTO Shigeru: Author of another FreeBSD cardbus driver
* * David Cross: Author of the initial ugly hack for a specific cardbus card
*/
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/errno.h>
#include <sys/kernel.h>
#include <sys/lock.h>
#include <sys/malloc.h>
#include <sys/mutex.h>
#include <sys/sysctl.h>
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
#include <sys/kthread.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <pci/pcireg.h>
#include <pci/pcivar.h>
#include <machine/clock.h>
#include <dev/pccard/pccardreg.h>
#include <dev/pccard/pccardvar.h>
#include <dev/exca/excareg.h>
#include <dev/exca/excavar.h>
#include <dev/pccbb/pccbbreg.h>
#include <dev/pccbb/pccbbvar.h>
#include "power_if.h"
#include "card_if.h"
#include "pcib_if.h"
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
#define DPRINTF(x) do { if (cbb_debug) printf x; } while (0)
#define DEVPRINTF(x) do { if (cbb_debug) device_printf x; } while (0)
#define PCI_MASK_CONFIG(DEV,REG,MASK,SIZE) \
pci_write_config(DEV, REG, pci_read_config(DEV, REG, SIZE) MASK, SIZE)
#define PCI_MASK2_CONFIG(DEV,REG,MASK1,MASK2,SIZE) \
pci_write_config(DEV, REG, ( \
pci_read_config(DEV, REG, SIZE) MASK1) MASK2, SIZE)
#define PCCBB_START_MEM 0x84000000
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
#define PCCBB_START_32_IO 0x1000
#define PCCBB_START_16_IO 0x100
struct yenta_chipinfo {
uint32_t yc_id;
const char *yc_name;
int yc_chiptype;
} yc_chipsets[] = {
/* Texas Instruments chips */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
{PCI_DEVICE_ID_PCIC_TI1031, "TI1031 PCI-PC Card Bridge", CB_TI113X},
{PCI_DEVICE_ID_PCIC_TI1130, "TI1130 PCI-CardBus Bridge", CB_TI113X},
{PCI_DEVICE_ID_PCIC_TI1131, "TI1131 PCI-CardBus Bridge", CB_TI113X},
{PCI_DEVICE_ID_PCIC_TI1210, "TI1210 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1211, "TI1211 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1220, "TI1220 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1221, "TI1221 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1225, "TI1225 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1250, "TI1250 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1251, "TI1251 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1251B,"TI1251B PCI-CardBus Bridge",CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1260, "TI1260 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1260B,"TI1260B PCI-CardBus Bridge",CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1410, "TI1410 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1420, "TI1420 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1421, "TI1421 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1450, "TI1450 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI1451, "TI1451 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI4410, "TI4410 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI4450, "TI4450 PCI-CardBus Bridge", CB_TI12XX},
{PCI_DEVICE_ID_PCIC_TI4451, "TI4451 PCI-CardBus Bridge", CB_TI12XX},
/* Ricoh chips */
{PCI_DEVICE_ID_RICOH_RL5C465, "RF5C465 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_RF5C46X},
{PCI_DEVICE_ID_RICOH_RL5C466, "RF5C466 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_RF5C46X},
{PCI_DEVICE_ID_RICOH_RL5C475, "RF5C475 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_RF5C47X},
{PCI_DEVICE_ID_RICOH_RL5C476, "RF5C476 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_RF5C47X},
{PCI_DEVICE_ID_RICOH_RL5C477, "RF5C477 PCI-CardBus Bridge",
CB_RF5C47X},
{PCI_DEVICE_ID_RICOH_RL5C478, "RF5C478 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_RF5C47X},
/* Toshiba products */
{PCI_DEVICE_ID_TOSHIBA_TOPIC95, "ToPIC95 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_TOPIC95},
{PCI_DEVICE_ID_TOSHIBA_TOPIC95B, "ToPIC95B PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_TOPIC95},
{PCI_DEVICE_ID_TOSHIBA_TOPIC97, "ToPIC97 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_TOPIC97},
{PCI_DEVICE_ID_TOSHIBA_TOPIC100, "ToPIC100 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_TOPIC97},
/* Cirrus Logic */
{PCI_DEVICE_ID_PCIC_CLPD6832, "CLPD6832 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_CIRRUS},
{PCI_DEVICE_ID_PCIC_CLPD6833, "CLPD6833 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_CIRRUS},
{PCI_DEVICE_ID_PCIC_CLPD6834, "CLPD6834 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_CIRRUS},
/* 02Micro */
{PCI_DEVICE_ID_PCIC_OZ6832, "O2Mirco OZ6832/6833 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_CIRRUS},
{PCI_DEVICE_ID_PCIC_OZ6860, "O2Mirco OZ6836/6860 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_CIRRUS},
{PCI_DEVICE_ID_PCIC_OZ6872, "O2Mirco OZ6812/6872 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_CIRRUS},
{PCI_DEVICE_ID_PCIC_OZ6912, "O2Mirco OZ6912/6972 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_CIRRUS},
{PCI_DEVICE_ID_PCIC_OZ6922, "O2Mirco OZ6822 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_CIRRUS},
{PCI_DEVICE_ID_PCIC_OZ6933, "O2Mirco OZ6833 PCI-CardBus Bridge",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
CB_CIRRUS},
/* sentinel */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
{0 /* null id */, "unknown", CB_UNKNOWN},
};
/* sysctl vars */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
SYSCTL_NODE(_hw, OID_AUTO, cbb, CTLFLAG_RD, 0, "CBB parameters");
/* There's no way to say TUNEABLE_LONG to get the right types */
u_long pccbb_start_mem = PCCBB_START_MEM;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
TUNABLE_INT("hw.cbb.start_memory", (int *)&pccbb_start_mem);
2002-04-29 07:37:09 +00:00
SYSCTL_ULONG(_hw_cbb, OID_AUTO, start_mem, CTLFLAG_RW,
&pccbb_start_mem, PCCBB_START_MEM,
"Starting address for memory allocations");
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
u_long pccbb_start_16_io = PCCBB_START_16_IO;
TUNABLE_INT("hw.cbb.start_16_io", (int *)&pccbb_start_16_io);
2002-04-29 07:37:09 +00:00
SYSCTL_ULONG(_hw_cbb, OID_AUTO, start_16_io, CTLFLAG_RW,
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
&pccbb_start_16_io, PCCBB_START_16_IO,
"Starting ioport for 16-bit cards");
u_long pccbb_start_32_io = PCCBB_START_32_IO;
TUNABLE_INT("hw.cbb.start_32_io", (int *)&pccbb_start_32_io);
2002-04-29 07:37:09 +00:00
SYSCTL_ULONG(_hw_cbb, OID_AUTO, start_32_io, CTLFLAG_RW,
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
&pccbb_start_32_io, PCCBB_START_32_IO,
"Starting ioport for 32-bit cards");
int cbb_debug = 0;
TUNABLE_INT("hw.cbb.debug", &cbb_debug);
2002-04-29 07:37:09 +00:00
SYSCTL_ULONG(_hw_cbb, OID_AUTO, debug, CTLFLAG_RW, &cbb_debug, 0,
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
"Verbose cardbus bridge debugging");
static int pccbb_chipset(uint32_t pci_id, const char **namep);
static int pccbb_probe(device_t brdev);
static void pccbb_chipinit(struct pccbb_softc *sc);
static int pccbb_attach(device_t brdev);
static int pccbb_detach(device_t brdev);
static int pccbb_shutdown(device_t brdev);
static void pccbb_driver_added(device_t brdev, driver_t *driver);
static void pccbb_child_detached(device_t brdev, device_t child);
static int pccbb_card_reprobe(device_t brdev, device_t busdev);
static void pccbb_event_thread(void *arg);
static void pccbb_insert(struct pccbb_softc *sc);
static void pccbb_removal(struct pccbb_softc *sc);
static void pccbb_intr(void *arg);
static int pccbb_detect_voltage(device_t brdev);
static int pccbb_power(device_t brdev, int volts);
static void pccbb_cardbus_reset(device_t brdev);
static int pccbb_cardbus_power_enable_socket(device_t brdev,
device_t child);
static void pccbb_cardbus_power_disable_socket(device_t brdev,
device_t child);
static int pccbb_cardbus_io_open(device_t brdev, int win, uint32_t start,
uint32_t end);
static int pccbb_cardbus_mem_open(device_t brdev, int win,
uint32_t start, uint32_t end);
static void pccbb_cardbus_auto_open(struct pccbb_softc *sc, int type);
static int pccbb_cardbus_activate_resource(device_t brdev, device_t child,
int type, int rid, struct resource *res);
static int pccbb_cardbus_deactivate_resource(device_t brdev,
device_t child, int type, int rid, struct resource *res);
static struct resource *pccbb_cardbus_alloc_resource(device_t brdev,
device_t child, int type, int *rid, u_long start,
u_long end, u_long count, uint flags);
static int pccbb_cardbus_release_resource(device_t brdev, device_t child,
int type, int rid, struct resource *res);
static int pccbb_power_enable_socket(device_t brdev, device_t child);
static void pccbb_power_disable_socket(device_t brdev, device_t child);
static int pccbb_activate_resource(device_t brdev, device_t child,
int type, int rid, struct resource *r);
static int pccbb_deactivate_resource(device_t brdev, device_t child,
int type, int rid, struct resource *r);
static struct resource *pccbb_alloc_resource(device_t brdev, device_t child,
int type, int *rid, u_long start, u_long end, u_long count,
uint flags);
static int pccbb_release_resource(device_t brdev, device_t child,
int type, int rid, struct resource *r);
static int pccbb_read_ivar(device_t brdev, device_t child, int which,
uintptr_t *result);
static int pccbb_write_ivar(device_t brdev, device_t child, int which,
uintptr_t value);
static int pccbb_maxslots(device_t brdev);
static uint32_t pccbb_read_config(device_t brdev, int b, int s, int f,
int reg, int width);
static void pccbb_write_config(device_t brdev, int b, int s, int f,
int reg, uint32_t val, int width);
/*
*/
static __inline void
pccbb_set(struct pccbb_softc *sc, uint32_t reg, uint32_t val)
{
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
bus_space_write_4(sc->bst, sc->bsh, reg, val);
}
static __inline uint32_t
pccbb_get(struct pccbb_softc *sc, uint32_t reg)
{
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
return (bus_space_read_4(sc->bst, sc->bsh, reg));
}
static __inline void
pccbb_setb(struct pccbb_softc *sc, uint32_t reg, uint32_t bits)
{
pccbb_set(sc, reg, pccbb_get(sc, reg) | bits);
}
static __inline void
pccbb_clrb(struct pccbb_softc *sc, uint32_t reg, uint32_t bits)
{
pccbb_set(sc, reg, pccbb_get(sc, reg) & ~bits);
}
static __inline uint8_t
pccbb_pcic_read(struct exca_softc *sc, int reg)
{
return (bus_space_read_1(sc->bst, sc->bsh, sc->offset + reg));
}
static __inline void
pccbb_pcic_write(struct exca_softc *sc, int reg, uint8_t val)
{
return (bus_space_write_1(sc->bst, sc->bsh, sc->offset + reg, val));
}
static void
pccbb_remove_res(struct pccbb_softc *sc, struct resource *res)
{
struct pccbb_reslist *rle;
SLIST_FOREACH(rle, &sc->rl, link) {
if (rle->res == res) {
SLIST_REMOVE(&sc->rl, rle, pccbb_reslist, link);
free(rle, M_DEVBUF);
return;
}
}
}
static struct resource *
pccbb_find_res(struct pccbb_softc *sc, int type, int rid)
{
struct pccbb_reslist *rle;
SLIST_FOREACH(rle, &sc->rl, link)
if (SYS_RES_MEMORY == rle->type && rid == rle->rid)
return (rle->res);
return (NULL);
}
static void
pccbb_insert_res(struct pccbb_softc *sc, struct resource *res, int type,
int rid)
{
struct pccbb_reslist *rle;
/*
* Need to record allocated resource so we can iterate through
* it later.
*/
rle = malloc(sizeof(struct pccbb_reslist), M_DEVBUF, M_NOWAIT);
if (!res)
panic("pccbb_cardbus_alloc_resource: can't record entry!");
rle->res = res;
rle->type = type;
rle->rid = rid;
SLIST_INSERT_HEAD(&sc->rl, rle, link);
}
static void
pccbb_destroy_res(struct pccbb_softc *sc)
{
struct pccbb_reslist *rle;
while ((rle = SLIST_FIRST(&sc->rl)) != NULL) {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
device_printf(sc->dev, "Danger Will Robinson: Resource "
"left allocated! This is a bug... "
"(rid=%x, type=%d, addr=%lx)\n", rle->rid, rle->type,
rman_get_start(rle->res));
SLIST_REMOVE_HEAD(&sc->rl, link);
free(rle, M_DEVBUF);
}
}
/************************************************************************/
/* Probe/Attach */
/************************************************************************/
static int
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
pccbb_chipset(uint32_t pci_id, const char **namep)
{
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
struct yenta_chipinfo *ycp;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
for (ycp = yc_chipsets; ycp->yc_id != 0 && pci_id != ycp->yc_id; ++ycp)
2002-01-15 20:41:39 +00:00
continue;
if (namep != NULL)
*namep = ycp->yc_name;
return (ycp->yc_chiptype);
}
static int
pccbb_probe(device_t brdev)
{
const char *name;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
uint32_t progif;
uint32_t subclass;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/*
* Do we know that we support the chipset? If so, then we
* accept the device.
*/
if (pccbb_chipset(pci_get_devid(brdev), &name) != CB_UNKNOWN) {
device_set_desc(brdev, name);
return (0);
}
/*
* We do support generic CardBus bridges. All that we've seen
* to date have progif 0 (the Yenta spec, and successors mandate
* this). We do not support PCI PCMCIA bridges (with one exception)
* with this driver since they generally are I/O mapped. Those
* are supported by the pcic driver. This should help us be more
* future proof.
*/
subclass = pci_get_subclass(brdev);
progif = pci_get_progif(brdev);
if (subclass == PCIS_BRIDGE_CARDBUS && progif == 0) {
device_set_desc(brdev, "PCI-CardBus Bridge");
return (0);
}
return (ENXIO);
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
static void
pccbb_chipinit(struct pccbb_softc *sc)
{
/* Set CardBus latency timer */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (pci_read_config(sc->dev, PCIR_SECLAT_1, 1) < 0x20)
pci_write_config(sc->dev, PCIR_SECLAT_1, 0x20, 1);
/* Set PCI latency timer */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (pci_read_config(sc->dev, PCIR_LATTIMER, 1) < 0x20)
pci_write_config(sc->dev, PCIR_LATTIMER, 0x20, 1);
/* Enable memory access */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
PCI_MASK_CONFIG(sc->dev, PCIR_COMMAND,
| PCIM_CMD_MEMEN
| PCIM_CMD_PORTEN
| PCIM_CMD_BUSMASTEREN, 2);
/* disable Legacy IO */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
switch (sc->chipset) {
case CB_RF5C46X:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
PCI_MASK_CONFIG(sc->dev, CBBR_BRIDGECTRL,
& ~(CBBM_BRIDGECTRL_RL_3E0_EN |
CBBM_BRIDGECTRL_RL_3E2_EN), 2);
break;
default:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
pci_write_config(sc->dev, CBBR_LEGACY, 0x0, 4);
break;
}
/* Use PCI interrupt for interrupt routing */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
PCI_MASK2_CONFIG(sc->dev, CBBR_BRIDGECTRL,
& ~(CBBM_BRIDGECTRL_MASTER_ABORT |
CBBM_BRIDGECTRL_INTR_IREQ_EN),
| CBBM_BRIDGECTRL_WRITE_POST_EN,
2);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/*
* XXX this should be a function table, ala OLDCARD. This means
* that we could more easily support ISA interrupts for pccard
* cards if we had to.
*/
switch (sc->chipset) {
case CB_TI113X:
/*
* The TI 1031, TI 1130 and TI 1131 all require another bit
* be set to enable PCI routing of interrupts, and then
* a bit for each of the CSC and Function interrupts we
* want routed.
*/
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
PCI_MASK_CONFIG(sc->dev, CBBR_CBCTRL,
| CBBM_CBCTRL_113X_PCI_INTR |
CBBM_CBCTRL_113X_PCI_CSC | CBBM_CBCTRL_113X_PCI_IRQ_EN,
1);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
PCI_MASK_CONFIG(sc->dev, CBBR_DEVCTRL,
& ~(CBBM_DEVCTRL_INT_SERIAL |
CBBM_DEVCTRL_INT_PCI), 1);
break;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
case CB_TOPIC97:
/*
* Disable Zoom Video, ToPIC 97, 100.
*/
pci_write_config(sc->dev, CBBR_TOPIC_ZV_CONTROL, 0, 1);
/*
* ToPIC 97, 100
* At offset 0xa1: INTERRUPT CONTROL register
* 0x1: Turn on INT interrupts.
*/
PCI_MASK_CONFIG(sc->dev, CBBR_TOPIC_INTCTRL,
| CBBM_TOPIC_INTCTRL_INTIRQSEL, 1);
goto topic_common;
case CB_TOPIC95:
/*
* SOCKETCTRL appears to be TOPIC 95/B specific
*/
PCI_MASK_CONFIG(sc->dev, CBBR_TOPIC_SOCKETCTRL,
| CBBM_TOPIC_SOCKETCTRL_SCR_IRQSEL, 4);
topic_common:;
/*
* At offset 0xa0: SLOT CONTROL
* 0x80 Enable Cardbus Functionality
* 0x40 Enable Cardbus and PC Card registers
* 0x20 Lock ID in exca regs
* 0x10 Write protect ID in config regs
* Clear the rest of the bits, which defaults the slot
* in legacy mode to 0x3e0 and offset 0. (legacy
* mode is determined elsewhere)
*/
pci_write_config(sc->dev, CBBR_TOPIC_SLOTCTRL,
CBBM_TOPIC_SLOTCTRL_SLOTON |
CBBM_TOPIC_SLOTCTRL_SLOTEN |
CBBM_TOPIC_SLOTCTRL_ID_LOCK |
CBBM_TOPIC_SLOTCTRL_ID_WP, 1);
/*
* At offset 0xa3 Card Detect Control Register
* 0x80 CARDBUS enbale
* 0x01 Cleared for hardware change detect
*/
PCI_MASK2_CONFIG(sc->dev, CBBR_TOPIC_CDC,
| CBBM_TOPIC_CDC_CARDBUS,
& ~CBBM_TOPIC_CDC_SWDETECT, 4);
break;
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/*
* Need to tell ExCA registers to route via PCI interrupts. There
* are two ways to do this. Once is to set INTR_ENABLE and the
* other is to set CSC to 0. Since both methods are mutually
* compatible, we do both.
*/
exca_write(&sc->exca, EXCA_INTR, EXCA_INTR_ENABLE);
exca_write(&sc->exca, EXCA_CSC_INTR, 0);
/* close all memory and io windows */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
pci_write_config(sc->dev, CBBR_MEMBASE0, 0xffffffff, 4);
pci_write_config(sc->dev, CBBR_MEMLIMIT0, 0, 4);
pci_write_config(sc->dev, CBBR_MEMBASE1, 0xffffffff, 4);
pci_write_config(sc->dev, CBBR_MEMLIMIT1, 0, 4);
pci_write_config(sc->dev, CBBR_IOBASE0, 0xffffffff, 4);
pci_write_config(sc->dev, CBBR_IOLIMIT0, 0, 4);
pci_write_config(sc->dev, CBBR_IOBASE1, 0xffffffff, 4);
pci_write_config(sc->dev, CBBR_IOLIMIT1, 0, 4);
}
static int
pccbb_attach(device_t brdev)
{
struct pccbb_softc *sc = (struct pccbb_softc *)device_get_softc(brdev);
int rid;
uint32_t sockbase;
mtx_init(&sc->mtx, device_get_nameunit(brdev), "pccbb", MTX_DEF);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sc->chipset = pccbb_chipset(pci_get_devid(brdev), NULL);
sc->dev = brdev;
sc->cbdev = NULL;
sc->pccarddev = NULL;
sc->secbus = pci_read_config(brdev, PCIR_SECBUS_2, 1);
sc->subbus = pci_read_config(brdev, PCIR_SUBBUS_2, 1);
SLIST_INIT(&sc->rl);
/*
* The PCI bus code should assign us memory in the absense
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
* of the BIOS doing so. However, 'should' isn't 'is,' so we kludge
* up something here until the PCI/acpi code properly assigns the
* resource.
*/
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
rid = CBBR_SOCKBASE;
sc->base_res = bus_alloc_resource(brdev, SYS_RES_MEMORY, &rid,
0, ~0, 1, RF_ACTIVE);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (!sc->base_res) {
/*
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
* Generally, the BIOS will assign this memory for us.
* However, newer BIOSes do not because the MS design
* documents have mandated that this is for the OS
* to assign rather than the BIOS. This driver shouldn't
* be doing this, but until the pci bus code (or acpi)
* does this, we allow CardBus bridges to work on more
* machines.
*/
sockbase = pci_read_config(brdev, rid, 4);
if (sockbase < 0x100000 || sockbase >= 0xfffffff0) {
pci_write_config(brdev, rid, 0xffffffff, 4);
sockbase = pci_read_config(brdev, rid, 4);
sockbase = (sockbase & 0xfffffff0) &
-(sockbase & 0xfffffff0);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sc->base_res = bus_generic_alloc_resource(
device_get_parent(brdev), brdev, SYS_RES_MEMORY,
&rid, pccbb_start_mem, ~0, sockbase,
RF_ACTIVE|rman_make_alignment_flags(sockbase));
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (!sc->base_res) {
device_printf(brdev,
"Could not grab register memory\n");
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
mtx_destroy(&sc->mtx);
return (ENOMEM);
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
pci_write_config(brdev, CBBR_SOCKBASE,
rman_get_start(sc->base_res), 4);
DEVPRINTF((brdev, "PCI Memory allocated: %08lx\n",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
rman_get_start(sc->base_res)));
} else {
device_printf(brdev, "Could not map register memory\n");
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
mtx_destroy(&sc->mtx);
return (ENOMEM);
}
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sc->bst = rman_get_bustag(sc->base_res);
sc->bsh = rman_get_bushandle(sc->base_res);
exca_init(&sc->exca, brdev, &pccbb_pcic_write, &pccbb_pcic_read,
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sc->bst, sc->bsh, 0x800);
pccbb_chipinit(sc);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/* attach children */
sc->cbdev = device_add_child(brdev, "cardbus", -1);
if (sc->cbdev == NULL)
DEVPRINTF((brdev, "WARNING: cannot add cardbus bus.\n"));
else if (device_probe_and_attach(sc->cbdev) != 0) {
DEVPRINTF((brdev, "WARNING: cannot attach cardbus bus!\n"));
sc->cbdev = NULL;
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sc->pccarddev = device_add_child(brdev, "pccard", -1);
if (sc->pccarddev == NULL)
DEVPRINTF((brdev, "WARNING: cannot add pccard bus.\n"));
else if (device_probe_and_attach(sc->pccarddev) != 0) {
DEVPRINTF((brdev, "WARNING: cannot attach pccard bus.\n"));
sc->pccarddev = NULL;
}
/* Map and establish the interrupt. */
rid = 0;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sc->irq_res = bus_alloc_resource(brdev, SYS_RES_IRQ, &rid, 0, ~0, 1,
RF_SHAREABLE | RF_ACTIVE);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (sc->irq_res == NULL) {
printf("pccbb: Unable to map IRQ...\n");
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
bus_release_resource(brdev, SYS_RES_MEMORY, CBBR_SOCKBASE,
sc->base_res);
mtx_destroy(&sc->mtx);
return (ENOMEM);
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (bus_setup_intr(brdev, sc->irq_res, INTR_TYPE_AV, pccbb_intr, sc,
&sc->intrhand)) {
device_printf(brdev, "couldn't establish interrupt");
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
bus_release_resource(brdev, SYS_RES_IRQ, 0, sc->irq_res);
bus_release_resource(brdev, SYS_RES_MEMORY, CBBR_SOCKBASE,
sc->base_res);
mtx_destroy(&sc->mtx);
return (ENOMEM);
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/* CSC Interrupt: Card detect interrupt on */
pccbb_setb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_CD);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/* reset interrupt */
pccbb_set(sc, CBB_SOCKET_EVENT, pccbb_get(sc, CBB_SOCKET_EVENT));
/* Start the thread */
if (kthread_create(pccbb_event_thread, sc, &sc->event_thread, 0,
"%s%d", device_get_name(sc->dev), device_get_unit(sc->dev))) {
device_printf (sc->dev, "unable to create event thread.\n");
panic ("pccbb_create_event_thread");
}
return (0);
}
static int
pccbb_detach(device_t brdev)
{
struct pccbb_softc *sc = device_get_softc(brdev);
int numdevs;
device_t *devlist;
int tmp;
int error;
device_get_children(brdev, &devlist, &numdevs);
error = 0;
for (tmp = 0; tmp < numdevs; tmp++) {
if (device_detach(devlist[tmp]) == 0)
device_delete_child(brdev, devlist[tmp]);
else
error++;
}
free(devlist, M_TEMP);
if (error > 0)
return (ENXIO);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
mtx_lock(&sc->mtx);
bus_teardown_intr(brdev, sc->irq_res, sc->intrhand);
sc->flags |= PCCBB_KTHREAD_DONE;
if (sc->flags & PCCBB_KTHREAD_RUNNING) {
wakeup(sc);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
mtx_unlock(&sc->mtx);
DEVPRINTF((brdev, "waiting for kthread exit..."));
error = tsleep(sc, PWAIT, "pccbb-detach-wait", 60 * hz);
if (error)
DPRINTF(("timeout\n"));
else
DPRINTF(("done\n"));
} else {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
mtx_unlock(&sc->mtx);
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
bus_release_resource(brdev, SYS_RES_IRQ, 0, sc->irq_res);
bus_release_resource(brdev, SYS_RES_MEMORY, CBBR_SOCKBASE,
sc->base_res);
mtx_destroy(&sc->mtx);
return (0);
}
static int
pccbb_shutdown(device_t brdev)
{
struct pccbb_softc *sc = (struct pccbb_softc *)device_get_softc(brdev);
/* properly reset everything at shutdown */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL, |CBBM_BRIDGECTRL_RESET, 2);
exca_clrb(&sc->exca, EXCA_INTR, EXCA_INTR_RESET);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
pccbb_set(sc, CBB_SOCKET_MASK, 0);
pccbb_power(brdev, CARD_VCC_0V | CARD_VPP_0V);
exca_write(&sc->exca, EXCA_ADDRWIN_ENABLE, 0);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
pci_write_config(brdev, CBBR_MEMBASE0, 0, 4);
pci_write_config(brdev, CBBR_MEMLIMIT0, 0, 4);
pci_write_config(brdev, CBBR_MEMBASE1, 0, 4);
pci_write_config(brdev, CBBR_MEMLIMIT1, 0, 4);
pci_write_config(brdev, CBBR_IOBASE0, 0, 4);
pci_write_config(brdev, CBBR_IOLIMIT0, 0, 4);
pci_write_config(brdev, CBBR_IOBASE1, 0, 4);
pci_write_config(brdev, CBBR_IOLIMIT1, 0, 4);
pci_write_config(brdev, PCIR_COMMAND, 0, 2);
return (0);
}
static int
pccbb_setup_intr(device_t dev, device_t child, struct resource *irq,
int flags, driver_intr_t *intr, void *arg, void **cookiep)
{
int err;
/*
* You aren't allowed to have fast interrupts for pccard/cardbus
* things since those interrupts are PCI and shared. Since we use
* the PCI interrupt for the status change interrupts, it can't be
* free for use by the driver. Fast interrupts must not be shared.
*/
if ((flags & INTR_FAST) != 0)
return (EINVAL);
err = bus_generic_setup_intr(dev, child, irq, flags, intr, arg,
cookiep);
/*
* XXX need to turn on ISA interrupts, if we ever support them, but
* XXX for now that's all we need to do.
*/
return (err);
}
static int
pccbb_teardown_intr(device_t dev, device_t child, struct resource *irq,
void *cookie)
{
/* XXX Need to do different things for ISA interrupts. */
return (bus_generic_teardown_intr(dev, child, irq, cookie));
}
static void
pccbb_driver_added(device_t brdev, driver_t *driver)
{
struct pccbb_softc *sc = device_get_softc(brdev);
device_t *devlist;
int tmp;
int numdevs;
int wake;
uint32_t sockstate;
DEVICE_IDENTIFY(driver, brdev);
device_get_children(brdev, &devlist, &numdevs);
wake = 0;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sockstate = pccbb_get(sc, CBB_SOCKET_STATE);
for (tmp = 0; tmp < numdevs; tmp++) {
if (device_get_state(devlist[tmp]) == DS_NOTPRESENT &&
device_probe_and_attach(devlist[tmp]) == 0) {
if (devlist[tmp] == NULL)
/* NOTHING */;
else if (strcmp(driver->name, "cardbus") == 0) {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sc->cbdev = devlist[tmp];
if (((sockstate & CBB_SOCKET_STAT_CD) == 0) &&
(sockstate & CBB_SOCKET_STAT_CB))
wake++;
} else if (strcmp(driver->name, "pccard") == 0) {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sc->pccarddev = devlist[tmp];
if (((sockstate & CBB_SOCKET_STAT_CD) == 0) &&
(sockstate & CBB_SOCKET_STAT_16BIT))
wake++;
} else
device_printf(brdev,
"Unsupported child bus: %s\n",
driver->name);
}
}
free(devlist, M_TEMP);
if (wake > 0) {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if ((pccbb_get(sc, CBB_SOCKET_STATE) & CBB_SOCKET_STAT_CD)
== 0) {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
mtx_lock(&sc->mtx);
wakeup(sc);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
mtx_unlock(&sc->mtx);
}
}
}
static void
pccbb_child_detached(device_t brdev, device_t child)
{
struct pccbb_softc *sc = device_get_softc(brdev);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (child == sc->cbdev)
sc->cbdev = NULL;
else if (child == sc->pccarddev)
sc->pccarddev = NULL;
else
device_printf(brdev, "Unknown child detached: %s %p/%p\n",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
device_get_nameunit(child), sc->cbdev, sc->pccarddev);
}
static int
pccbb_card_reprobe(device_t brdev, device_t busdev)
{
struct pccbb_softc *sc = device_get_softc(brdev);
int wake = 0;
uint32_t sockstate;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sockstate = pccbb_get(sc, CBB_SOCKET_STATE);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if ((sockstate & CBB_SOCKET_STAT_CD) == 0) {
if (busdev == sc->cbdev &&
(sockstate & CBB_SOCKET_STAT_CB))
wake++;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
else if (busdev == sc->pccarddev &&
(sockstate & CBB_SOCKET_STAT_16BIT))
wake++;
if (wake > 0) {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
mtx_lock(&sc->mtx);
wakeup(sc);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
mtx_unlock(&sc->mtx);
return (0);
}
return (EBUSY);
}
return (ENOENT);
}
/************************************************************************/
/* Kthreads */
/************************************************************************/
static void
pccbb_event_thread(void *arg)
{
struct pccbb_softc *sc = arg;
uint32_t status;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
int err;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/*
* We take out Giant here because we drop it in tsleep
* and need it for kthread_exit, which drops it.
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
*/
Change and clean the mutex lock interface. mtx_enter(lock, type) becomes: mtx_lock(lock) for sleep locks (MTX_DEF-initialized locks) mtx_lock_spin(lock) for spin locks (MTX_SPIN-initialized) similarily, for releasing a lock, we now have: mtx_unlock(lock) for MTX_DEF and mtx_unlock_spin(lock) for MTX_SPIN. We change the caller interface for the two different types of locks because the semantics are entirely different for each case, and this makes it explicitly clear and, at the same time, it rids us of the extra `type' argument. The enter->lock and exit->unlock change has been made with the idea that we're "locking data" and not "entering locked code" in mind. Further, remove all additional "flags" previously passed to the lock acquire/release routines with the exception of two: MTX_QUIET and MTX_NOSWITCH The functionality of these flags is preserved and they can be passed to the lock/unlock routines by calling the corresponding wrappers: mtx_{lock, unlock}_flags(lock, flag(s)) and mtx_{lock, unlock}_spin_flags(lock, flag(s)) for MTX_DEF and MTX_SPIN locks, respectively. Re-inline some lock acq/rel code; in the sleep lock case, we only inline the _obtain_lock()s in order to ensure that the inlined code fits into a cache line. In the spin lock case, we inline recursion and actually only perform a function call if we need to spin. This change has been made with the idea that we generally tend to avoid spin locks and that also the spin locks that we do have and are heavily used (i.e. sched_lock) do recurse, and therefore in an effort to reduce function call overhead for some architectures (such as alpha), we inline recursion for this case. Create a new malloc type for the witness code and retire from using the M_DEV type. The new type is called M_WITNESS and is only declared if WITNESS is enabled. Begin cleaning up some machdep/mutex.h code - specifically updated the "optimized" inlined code in alpha/mutex.h and wrote MTX_LOCK_SPIN and MTX_UNLOCK_SPIN asm macros for the i386/mutex.h as we presently need those. Finally, caught up to the interface changes in all sys code. Contributors: jake, jhb, jasone (in no particular order)
2001-02-09 06:11:45 +00:00
mtx_lock(&Giant);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sc->flags |= PCCBB_KTHREAD_RUNNING;
while (1) {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/*
* Check to see if we have anything first so that
* if there's a card already inserted, we do the
* right thing.
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
*/
mtx_lock(&sc->mtx);
if (sc->flags & PCCBB_KTHREAD_DONE)
break;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
status = pccbb_get(sc, CBB_SOCKET_STATE);
if ((status & CBB_SOCKET_STAT_CD) == 0)
pccbb_insert(sc);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
else
pccbb_removal(sc);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
mtx_unlock(&sc->mtx);
/*
* Wait until it has been 1s since the last time we
* get an interrupt. We handle the rest of the interrupt
* at the top of the loop.
*/
tsleep (sc, PWAIT, "pccbbev", 0);
do {
err = tsleep (sc, PWAIT, "pccbbev", 1 * hz);
} while (err != EWOULDBLOCK &&
(sc->flags & PCCBB_KTHREAD_DONE) == 0);
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
mtx_unlock(&sc->mtx);
sc->flags &= ~PCCBB_KTHREAD_RUNNING;
/*
* XXX I think there's a race here. If we wakeup in the other
* thread before kthread_exit is called and this routine returns,
* and that thread causes us to be unmapped, then we are setting
* ourselves up for a panic. Make sure that I check out
* jhb's crash.c for a fix.
*/
wakeup(sc);
kthread_exit(0);
}
/************************************************************************/
/* Insert/removal */
/************************************************************************/
static void
pccbb_insert(struct pccbb_softc *sc)
{
uint32_t sockevent, sockstate;
int timeout = 30;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/*
* Debounce interrupt. However, most of the debounce
* is done in the thread's timeout routines.
*/
do {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sockevent = pccbb_get(sc, CBB_SOCKET_EVENT);
sockstate = pccbb_get(sc, CBB_SOCKET_STATE);
} while (sockstate & CBB_SOCKET_STAT_CD && --timeout > 0);
if (timeout < 0) {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
device_printf (sc->dev, "insert timeout");
return;
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
DEVPRINTF((sc->dev, "card inserted: event=0x%08x, state=%08x\n",
sockevent, sockstate));
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (sockstate & CBB_SOCKET_STAT_16BIT) {
if (sc->pccarddev != NULL) {
sc->flags |= PCCBB_16BIT_CARD;
if (CARD_ATTACH_CARD(sc->pccarddev) != 0)
device_printf(sc->dev,
"PC Card card activation failed\n");
} else {
device_printf(sc->dev,
"PC Card inserted, but no pccard bus.\n");
}
} else if (sockstate & CBB_SOCKET_STAT_CB) {
if (sc->cbdev != NULL) {
sc->flags &= ~PCCBB_16BIT_CARD;
if (CARD_ATTACH_CARD(sc->cbdev) != 0)
device_printf(sc->dev,
"CardBus card activation failed\n");
} else {
device_printf(sc->dev,
"CardBUS card inserted, but no cardbus bus.\n");
}
} else {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/*
* We should power the card down, and try again a couple of
* times if this happens. XXX
*/
device_printf (sc->dev, "Unsupported card type detected\n");
}
}
static void
pccbb_removal(struct pccbb_softc *sc)
{
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (sc->flags & PCCBB_16BIT_CARD && sc->pccarddev != NULL)
CARD_DETACH_CARD(sc->pccarddev, DETACH_FORCE);
else if ((!(sc->flags & PCCBB_16BIT_CARD)) && sc->cbdev != NULL)
CARD_DETACH_CARD(sc->cbdev, DETACH_FORCE);
pccbb_destroy_res(sc);
}
/************************************************************************/
/* Interrupt Handler */
/************************************************************************/
static void
pccbb_intr(void *arg)
{
struct pccbb_softc *sc = arg;
uint32_t sockevent;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/*
* This ISR needs work XXX
*/
sockevent = pccbb_get(sc, CBB_SOCKET_EVENT);
if (sockevent) {
/* ack the interrupt */
pccbb_setb(sc, CBB_SOCKET_EVENT, sockevent);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (sockevent & CBB_SOCKET_EVENT_CD) {
mtx_lock(&sc->mtx);
wakeup(sc);
mtx_unlock(&sc->mtx);
}
if (sockevent & CBB_SOCKET_EVENT_CSTS) {
DPRINTF((" cstsevent occured: 0x%08x\n",
pccbb_get(sc, CBB_SOCKET_STATE)));
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (sockevent & CBB_SOCKET_EVENT_POWER) {
DPRINTF((" pwrevent occured: 0x%08x\n",
pccbb_get(sc, CBB_SOCKET_STATE)));
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/* Other bits? */
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/* Call the interrupt if we still have the card */
}
/************************************************************************/
/* Generic Power functions */
/************************************************************************/
static int
pccbb_detect_voltage(device_t brdev)
{
struct pccbb_softc *sc = device_get_softc(brdev);
uint32_t psr;
int vol = CARD_UKN_CARD;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
psr = pccbb_get(sc, CBB_SOCKET_STATE);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (psr & CBB_SOCKET_STAT_5VCARD)
vol |= CARD_5V_CARD;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (psr & CBB_SOCKET_STAT_3VCARD)
vol |= CARD_3V_CARD;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (psr & CBB_SOCKET_STAT_XVCARD)
vol |= CARD_XV_CARD;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (psr & CBB_SOCKET_STAT_YVCARD)
vol |= CARD_YV_CARD;
return (vol);
}
static int
pccbb_power(device_t brdev, int volts)
{
uint32_t status, sock_ctrl;
struct pccbb_softc *sc = device_get_softc(brdev);
int timeout;
uint32_t sockevent;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
DEVPRINTF((sc->dev, "pccbb_power: %s and %s [%x]\n",
(volts & CARD_VCCMASK) == CARD_VCC_UC ? "CARD_VCC_UC" :
(volts & CARD_VCCMASK) == CARD_VCC_5V ? "CARD_VCC_5V" :
(volts & CARD_VCCMASK) == CARD_VCC_3V ? "CARD_VCC_3V" :
(volts & CARD_VCCMASK) == CARD_VCC_XV ? "CARD_VCC_XV" :
(volts & CARD_VCCMASK) == CARD_VCC_YV ? "CARD_VCC_YV" :
(volts & CARD_VCCMASK) == CARD_VCC_0V ? "CARD_VCC_0V" :
"VCC-UNKNOWN",
(volts & CARD_VPPMASK) == CARD_VPP_UC ? "CARD_VPP_UC" :
(volts & CARD_VPPMASK) == CARD_VPP_12V ? "CARD_VPP_12V" :
(volts & CARD_VPPMASK) == CARD_VPP_VCC ? "CARD_VPP_VCC" :
(volts & CARD_VPPMASK) == CARD_VPP_0V ? "CARD_VPP_0V" :
"VPP-UNKNOWN",
volts));
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
status = pccbb_get(sc, CBB_SOCKET_STATE);
sock_ctrl = pccbb_get(sc, CBB_SOCKET_CONTROL);
switch (volts & CARD_VCCMASK) {
case CARD_VCC_UC:
break;
case CARD_VCC_5V:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (CBB_SOCKET_STAT_5VCARD & status) { /* check 5 V card */
sock_ctrl &= ~CBB_SOCKET_CTRL_VCCMASK;
sock_ctrl |= CBB_SOCKET_CTRL_VCC_5V;
} else {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
device_printf(sc->dev,
"BAD voltage request: no 5 V card\n");
}
break;
case CARD_VCC_3V:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (CBB_SOCKET_STAT_3VCARD & status) {
sock_ctrl &= ~CBB_SOCKET_CTRL_VCCMASK;
sock_ctrl |= CBB_SOCKET_CTRL_VCC_3V;
} else {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
device_printf(sc->dev,
"BAD voltage request: no 3.3 V card\n");
}
break;
case CARD_VCC_0V:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sock_ctrl &= ~CBB_SOCKET_CTRL_VCCMASK;
break;
default:
return (0); /* power NEVER changed */
break;
}
switch (volts & CARD_VPPMASK) {
case CARD_VPP_UC:
break;
case CARD_VPP_0V:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sock_ctrl &= ~CBB_SOCKET_CTRL_VPPMASK;
break;
case CARD_VPP_VCC:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sock_ctrl &= ~CBB_SOCKET_CTRL_VPPMASK;
sock_ctrl |= ((sock_ctrl >> 4) & 0x07);
break;
case CARD_VPP_12V:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sock_ctrl &= ~CBB_SOCKET_CTRL_VPPMASK;
sock_ctrl |= CBB_SOCKET_CTRL_VPP_12V;
break;
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (pccbb_get(sc, CBB_SOCKET_CONTROL) == sock_ctrl)
return (1); /* no change necessary */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
pccbb_set(sc, CBB_SOCKET_CONTROL, sock_ctrl);
status = pccbb_get(sc, CBB_SOCKET_STATE);
2001-09-06 20:43:12 +00:00
/*
* XXX This busy wait is bogus. We should wait for a power
* interrupt and then whine if the status is bad. If we're
* worried about the card not coming up, then we should also
* schedule a timeout which we can cacel in the power interrupt.
*/
timeout = 20;
do {
DELAY(20*1000);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sockevent = pccbb_get(sc, CBB_SOCKET_EVENT);
} while (!(sockevent & CBB_SOCKET_EVENT_POWER) && --timeout > 0);
/* reset event status */
/* XXX should only reset EVENT_POWER */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
pccbb_set(sc, CBB_SOCKET_EVENT, sockevent);
if (timeout < 0) {
printf ("VCC supply failed.\n");
return (0);
}
/* XXX
* delay 400 ms: thgough the standard defines that the Vcc set-up time
* is 20 ms, some PC-Card bridge requires longer duration.
2001-09-06 20:43:12 +00:00
* XXX Note: We should check the stutus AFTER the delay to give time
* for things to stabilize.
*/
DELAY(400*1000);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (status & CBB_SOCKET_STAT_BADVCC) {
device_printf(sc->dev,
"bad Vcc request. ctrl=0x%x, status=0x%x\n",
sock_ctrl ,status);
printf("pccbb_power: %s and %s [%x]\n",
(volts & CARD_VCCMASK) == CARD_VCC_UC ? "CARD_VCC_UC" :
(volts & CARD_VCCMASK) == CARD_VCC_5V ? "CARD_VCC_5V" :
(volts & CARD_VCCMASK) == CARD_VCC_3V ? "CARD_VCC_3V" :
(volts & CARD_VCCMASK) == CARD_VCC_XV ? "CARD_VCC_XV" :
(volts & CARD_VCCMASK) == CARD_VCC_YV ? "CARD_VCC_YV" :
(volts & CARD_VCCMASK) == CARD_VCC_0V ? "CARD_VCC_0V" :
"VCC-UNKNOWN",
(volts & CARD_VPPMASK) == CARD_VPP_UC ? "CARD_VPP_UC" :
(volts & CARD_VPPMASK) == CARD_VPP_12V ? "CARD_VPP_12V":
(volts & CARD_VPPMASK) == CARD_VPP_VCC ? "CARD_VPP_VCC":
(volts & CARD_VPPMASK) == CARD_VPP_0V ? "CARD_VPP_0V" :
"VPP-UNKNOWN",
volts);
return (0);
}
return (1); /* power changed correctly */
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/*
* detect the voltage for the card, and set it. Since the power
* used is the square of the voltage, lower voltages is a big win
* and what Windows does (and what Microsoft prefers). The MS paper
* also talks about preferring the CIS entry as well.
*/
static int
pccbb_do_power(device_t brdev)
{
int voltage;
/* Prefer lowest voltage supported */
voltage = pccbb_detect_voltage(brdev);
pccbb_power(brdev, CARD_VCC_0V | CARD_VPP_0V);
if (voltage & CARD_YV_CARD)
pccbb_power(brdev, CARD_VCC_YV | CARD_VPP_VCC);
else if (voltage & CARD_XV_CARD)
pccbb_power(brdev, CARD_VCC_XV | CARD_VPP_VCC);
else if (voltage & CARD_3V_CARD)
pccbb_power(brdev, CARD_VCC_3V | CARD_VPP_VCC);
else if (voltage & CARD_5V_CARD)
pccbb_power(brdev, CARD_VCC_5V | CARD_VPP_VCC);
else {
device_printf(brdev, "Unknown card voltage\n");
return (ENXIO);
}
return (0);
}
/************************************************************************/
/* Cardbus power functions */
/************************************************************************/
static void
pccbb_cardbus_reset(device_t brdev)
{
struct pccbb_softc *sc = device_get_softc(brdev);
int delay_us;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
delay_us = sc->chipset == CB_RF5C47X ? 400*1000 : 20*1000;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL, |CBBM_BRIDGECTRL_RESET, 2);
DELAY(delay_us);
/* If a card exists, unreset it! */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if ((pccbb_get(sc, CBB_SOCKET_STATE) & CBB_SOCKET_STAT_CD) == 0) {
PCI_MASK_CONFIG(brdev, CBBR_BRIDGECTRL,
&~CBBM_BRIDGECTRL_RESET, 2);
DELAY(delay_us);
}
}
static int
pccbb_cardbus_power_enable_socket(device_t brdev, device_t child)
{
struct pccbb_softc *sc = device_get_softc(brdev);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
int err;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if ((pccbb_get(sc, CBB_SOCKET_STATE) & CBB_SOCKET_STAT_CD) ==
CBB_SOCKET_STAT_CD)
return (ENODEV);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
err = pccbb_do_power(brdev);
if (err)
return (err);
pccbb_cardbus_reset(brdev);
return (0);
}
static void
pccbb_cardbus_power_disable_socket(device_t brdev, device_t child)
{
pccbb_power(brdev, CARD_VCC_0V | CARD_VPP_0V);
pccbb_cardbus_reset(brdev);
}
/************************************************************************/
/* Cardbus Resource */
/************************************************************************/
static int
pccbb_cardbus_io_open(device_t brdev, int win, uint32_t start, uint32_t end)
{
int basereg;
int limitreg;
if ((win < 0) || (win > 1)) {
DEVPRINTF((brdev,
"pccbb_cardbus_io_open: window out of range %d\n", win));
return (EINVAL);
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
basereg = win * 8 + CBBR_IOBASE0;
limitreg = win * 8 + CBBR_IOLIMIT0;
pci_write_config(brdev, basereg, start, 4);
pci_write_config(brdev, limitreg, end, 4);
return (0);
}
static int
pccbb_cardbus_mem_open(device_t brdev, int win, uint32_t start, uint32_t end)
{
int basereg;
int limitreg;
if ((win < 0) || (win > 1)) {
DEVPRINTF((brdev,
"pccbb_cardbus_mem_open: window out of range %d\n", win));
return (EINVAL);
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
basereg = win*8 + CBBR_MEMBASE0;
limitreg = win*8 + CBBR_MEMLIMIT0;
pci_write_config(brdev, basereg, start, 4);
pci_write_config(brdev, limitreg, end, 4);
return (0);
}
2002-01-15 20:41:39 +00:00
/*
* XXX The following function belongs in the pci bus layer.
*/
static void
pccbb_cardbus_auto_open(struct pccbb_softc *sc, int type)
{
uint32_t starts[2];
uint32_t ends[2];
struct pccbb_reslist *rle;
int align;
int prefetchable[2];
uint32_t reg;
starts[0] = starts[1] = 0xffffffff;
ends[0] = ends[1] = 0;
if (type == SYS_RES_MEMORY)
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
align = CBB_MEMALIGN;
else if (type == SYS_RES_IOPORT)
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
align = CBB_IOALIGN;
else
align = 1;
SLIST_FOREACH(rle, &sc->rl, link) {
if (rle->type != type)
;
else if (rle->res == NULL) {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
device_printf(sc->dev, "WARNING: Resource not reserved? "
"(type=%d, addr=%lx)\n",
rle->type, rman_get_start(rle->res));
} else if (!(rman_get_flags(rle->res) & RF_ACTIVE)) {
/* XXX */
} else if (starts[0] == 0xffffffff) {
starts[0] = rman_get_start(rle->res);
ends[0] = rman_get_end(rle->res);
prefetchable[0] =
rman_get_flags(rle->res) & RF_PREFETCHABLE;
} else if (rman_get_end(rle->res) > ends[0] &&
rman_get_start(rle->res) - ends[0] <
PCCBB_AUTO_OPEN_SMALLHOLE && prefetchable[0] ==
(rman_get_flags(rle->res) & RF_PREFETCHABLE)) {
ends[0] = rman_get_end(rle->res);
} else if (rman_get_start(rle->res) < starts[0] &&
starts[0] - rman_get_end(rle->res) <
PCCBB_AUTO_OPEN_SMALLHOLE && prefetchable[0] ==
(rman_get_flags(rle->res) & RF_PREFETCHABLE)) {
starts[0] = rman_get_start(rle->res);
} else if (starts[1] == 0xffffffff) {
starts[1] = rman_get_start(rle->res);
ends[1] = rman_get_end(rle->res);
prefetchable[1] =
rman_get_flags(rle->res) & RF_PREFETCHABLE;
} else if (rman_get_end(rle->res) > ends[1] &&
rman_get_start(rle->res) - ends[1] <
PCCBB_AUTO_OPEN_SMALLHOLE && prefetchable[1] ==
(rman_get_flags(rle->res) & RF_PREFETCHABLE)) {
ends[1] = rman_get_end(rle->res);
} else if (rman_get_start(rle->res) < starts[1] &&
starts[1] - rman_get_end(rle->res) <
PCCBB_AUTO_OPEN_SMALLHOLE && prefetchable[1] ==
(rman_get_flags(rle->res) & RF_PREFETCHABLE)) {
starts[1] = rman_get_start(rle->res);
} else {
uint32_t diffs[2];
int win;
diffs[0] = diffs[1] = 0xffffffff;
if (rman_get_start(rle->res) > ends[0])
diffs[0] = rman_get_start(rle->res) - ends[0];
else if (rman_get_end(rle->res) < starts[0])
diffs[0] = starts[0] - rman_get_end(rle->res);
if (rman_get_start(rle->res) > ends[1])
diffs[1] = rman_get_start(rle->res) - ends[1];
else if (rman_get_end(rle->res) < starts[1])
diffs[1] = starts[1] - rman_get_end(rle->res);
win = (diffs[0] <= diffs[1])?0:1;
if (rman_get_start(rle->res) > ends[win])
ends[win] = rman_get_end(rle->res);
else if (rman_get_end(rle->res) < starts[win])
starts[win] = rman_get_start(rle->res);
if (!(rman_get_flags(rle->res) & RF_PREFETCHABLE))
prefetchable[win] = 0;
}
if (starts[0] != 0xffffffff)
starts[0] -= starts[0] % align;
if (starts[1] != 0xffffffff)
starts[1] -= starts[1] % align;
if (ends[0] % align != 0)
ends[0] += align - ends[0]%align - 1;
if (ends[1] % align != 0)
ends[1] += align - ends[1]%align - 1;
}
if (type == SYS_RES_MEMORY) {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
pccbb_cardbus_mem_open(sc->dev, 0, starts[0], ends[0]);
pccbb_cardbus_mem_open(sc->dev, 1, starts[1], ends[1]);
reg = pci_read_config(sc->dev, CBBR_BRIDGECTRL, 2);
reg &= ~(CBBM_BRIDGECTRL_PREFETCH_0|
CBBM_BRIDGECTRL_PREFETCH_1);
reg |= (prefetchable[0]?CBBM_BRIDGECTRL_PREFETCH_0:0)|
(prefetchable[1]?CBBM_BRIDGECTRL_PREFETCH_1:0);
pci_write_config(sc->dev, CBBR_BRIDGECTRL, reg, 2);
} else if (type == SYS_RES_IOPORT) {
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
pccbb_cardbus_io_open(sc->dev, 0, starts[0], ends[0]);
pccbb_cardbus_io_open(sc->dev, 1, starts[1], ends[1]);
}
}
static int
pccbb_cardbus_activate_resource(device_t brdev, device_t child, int type,
int rid, struct resource *res)
{
int ret;
ret = BUS_ACTIVATE_RESOURCE(device_get_parent(brdev), child,
type, rid, res);
if (ret != 0)
return (ret);
pccbb_cardbus_auto_open(device_get_softc(brdev), type);
return (0);
}
static int
pccbb_cardbus_deactivate_resource(device_t brdev, device_t child, int type,
int rid, struct resource *res)
{
int ret;
ret = BUS_DEACTIVATE_RESOURCE(device_get_parent(brdev), child,
type, rid, res);
if (ret != 0)
return (ret);
pccbb_cardbus_auto_open(device_get_softc(brdev), type);
return (0);
}
static struct resource *
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
pccbb_cardbus_alloc_resource(device_t brdev, device_t child, int type,
int *rid, u_long start, u_long end, u_long count, uint flags)
{
struct pccbb_softc *sc = device_get_softc(brdev);
int tmp;
struct resource *res;
switch (type) {
case SYS_RES_IRQ:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
tmp = rman_get_start(sc->irq_res);
if (start > tmp || end < tmp || count != 1) {
device_printf(child, "requested interrupt %ld-%ld,"
"count = %ld not supported by pccbb\n",
start, end, count);
return (NULL);
}
start = end = tmp;
break;
case SYS_RES_IOPORT:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (start <= pccbb_start_32_io)
start = pccbb_start_32_io;
if (end < start)
end = start;
break;
case SYS_RES_MEMORY:
if (start <= pccbb_start_mem)
start = pccbb_start_mem;
if (end < start)
end = start;
break;
}
res = BUS_ALLOC_RESOURCE(device_get_parent(brdev), child, type, rid,
start, end, count, flags & ~RF_ACTIVE);
if (res == NULL) {
printf("pccbb alloc res fail\n");
return (NULL);
}
pccbb_insert_res(sc, res, type, *rid);
if (flags & RF_ACTIVE)
if (bus_activate_resource(child, type, *rid, res) != 0) {
bus_release_resource(child, type, *rid, res);
return (NULL);
}
return (res);
}
static int
pccbb_cardbus_release_resource(device_t brdev, device_t child, int type,
int rid, struct resource *res)
{
struct pccbb_softc *sc = device_get_softc(brdev);
int error;
if (rman_get_flags(res) & RF_ACTIVE) {
error = bus_deactivate_resource(child, type, rid, res);
if (error != 0)
return (error);
}
pccbb_remove_res(sc, res);
return (BUS_RELEASE_RESOURCE(device_get_parent(brdev), child,
type, rid, res));
}
/************************************************************************/
/* PC Card Power Functions */
/************************************************************************/
static int
pccbb_pcic_power_enable_socket(device_t brdev, device_t child)
{
struct pccbb_softc *sc = device_get_softc(brdev);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
int err;
DPRINTF(("pccbb_pcic_socket_enable:\n"));
/* power down/up the socket to reset */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
err = pccbb_do_power(brdev);
if (err)
return (err);
exca_reset(&sc->exca, child);
return (0);
}
static void
pccbb_pcic_power_disable_socket(device_t brdev, device_t child)
{
struct pccbb_softc *sc = device_get_softc(brdev);
DPRINTF(("pccbb_pcic_socket_disable\n"));
/* reset signal asserting... */
exca_clrb(&sc->exca, EXCA_INTR, EXCA_INTR_RESET);
DELAY(2*1000);
/* power down the socket */
pccbb_power(brdev, CARD_VCC_0V | CARD_VPP_0V);
exca_clrb(&sc->exca, EXCA_PWRCTL, EXCA_PWRCTL_OE);
/* wait 300ms until power fails (Tpf). */
DELAY(300 * 1000);
}
/************************************************************************/
/* POWER methods */
/************************************************************************/
static int
pccbb_power_enable_socket(device_t brdev, device_t child)
{
struct pccbb_softc *sc = device_get_softc(brdev);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (sc->flags & PCCBB_16BIT_CARD)
return (pccbb_pcic_power_enable_socket(brdev, child));
else
return (pccbb_cardbus_power_enable_socket(brdev, child));
}
static void
pccbb_power_disable_socket(device_t brdev, device_t child)
{
struct pccbb_softc *sc = device_get_softc(brdev);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (sc->flags & PCCBB_16BIT_CARD)
pccbb_pcic_power_disable_socket(brdev, child);
else
pccbb_cardbus_power_disable_socket(brdev, child);
}
static int
pccbb_pcic_activate_resource(device_t brdev, device_t child, int type, int rid,
struct resource *res)
{
int err;
struct pccbb_softc *sc = device_get_softc(brdev);
if (!(rman_get_flags(res) & RF_ACTIVE)) { /* not already activated */
switch (type) {
case SYS_RES_IOPORT:
err = exca_io_map(&sc->exca, 0, res);
break;
case SYS_RES_MEMORY:
err = exca_mem_map(&sc->exca, 0, res);
break;
default:
err = 0;
break;
}
if (err)
return (err);
}
return (BUS_ACTIVATE_RESOURCE(device_get_parent(brdev), child,
type, rid, res));
}
static int
pccbb_pcic_deactivate_resource(device_t brdev, device_t child, int type,
int rid, struct resource *res)
{
struct pccbb_softc *sc = device_get_softc(brdev);
if (rman_get_flags(res) & RF_ACTIVE) { /* if activated */
switch (type) {
case SYS_RES_IOPORT:
if (exca_io_unmap_res(&sc->exca, res))
return (ENOENT);
break;
case SYS_RES_MEMORY:
if (exca_mem_unmap_res(&sc->exca, res))
return (ENOENT);
break;
}
}
return (BUS_DEACTIVATE_RESOURCE(device_get_parent(brdev), child,
type, rid, res));
}
static struct resource *
pccbb_pcic_alloc_resource(device_t brdev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, uint flags)
{
struct resource *res = NULL;
struct pccbb_softc *sc = device_get_softc(brdev);
int tmp;
switch (type) {
case SYS_RES_MEMORY:
if (start < pccbb_start_mem)
start = pccbb_start_mem;
if (end < start)
end = start;
flags = (flags & ~RF_ALIGNMENT_MASK) |
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
rman_make_alignment_flags(CBB_MEMALIGN);
break;
case SYS_RES_IOPORT:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (start < pccbb_start_16_io)
start = pccbb_start_16_io;
if (end < start)
end = start;
break;
case SYS_RES_IRQ:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
tmp = rman_get_start(sc->irq_res);
if (start > tmp || end < tmp || count != 1) {
device_printf(child, "requested interrupt %ld-%ld,"
"count = %ld not supported by pccbb\n",
start, end, count);
return (NULL);
}
flags |= RF_SHAREABLE;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
start = end = rman_get_start(sc->irq_res);
break;
}
res = BUS_ALLOC_RESOURCE(device_get_parent(brdev), child, type, rid,
start, end, count, flags & ~RF_ACTIVE);
if (res == NULL)
return (NULL);
pccbb_insert_res(sc, res, type, *rid);
if (flags & RF_ACTIVE) {
if (bus_activate_resource(child, type, *rid, res) != 0) {
bus_release_resource(child, type, *rid, res);
return (NULL);
}
}
return (res);
}
static int
pccbb_pcic_release_resource(device_t brdev, device_t child, int type,
int rid, struct resource *res)
{
struct pccbb_softc *sc = device_get_softc(brdev);
int error;
if (rman_get_flags(res) & RF_ACTIVE) {
error = bus_deactivate_resource(child, type, rid, res);
if (error != 0)
return (error);
}
pccbb_remove_res(sc, res);
return (BUS_RELEASE_RESOURCE(device_get_parent(brdev), child,
type, rid, res));
}
/************************************************************************/
/* PC Card methods */
/************************************************************************/
static int
pccbb_pcic_set_res_flags(device_t brdev, device_t child, int type, int rid,
uint32_t flags)
{
struct pccbb_softc *sc = device_get_softc(brdev);
struct resource *res;
if (type != SYS_RES_MEMORY)
return (EINVAL);
res = pccbb_find_res(sc, type, rid);
if (res == NULL) {
device_printf(brdev,
"set_res_flags: specified rid not found\n");
return (ENOENT);
}
return (exca_mem_set_flags(&sc->exca, res, flags));
}
static int
pccbb_pcic_set_memory_offset(device_t brdev, device_t child, int rid,
uint32_t cardaddr, uint32_t *deltap)
{
struct pccbb_softc *sc = device_get_softc(brdev);
struct resource *res;
res = pccbb_find_res(sc, SYS_RES_MEMORY, rid);
if (res == NULL) {
device_printf(brdev,
"set_memory_offset: specified rid not found\n");
return (ENOENT);
}
return (exca_mem_set_offset(&sc->exca, res, cardaddr, deltap));
}
/************************************************************************/
/* BUS Methods */
/************************************************************************/
static int
pccbb_activate_resource(device_t brdev, device_t child, int type, int rid,
struct resource *r)
{
struct pccbb_softc *sc = device_get_softc(brdev);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (sc->flags & PCCBB_16BIT_CARD)
return (pccbb_pcic_activate_resource(brdev, child, type, rid, r));
else
return (pccbb_cardbus_activate_resource(brdev, child, type, rid,
r));
}
static int
pccbb_deactivate_resource(device_t brdev, device_t child, int type,
int rid, struct resource *r)
{
struct pccbb_softc *sc = device_get_softc(brdev);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (sc->flags & PCCBB_16BIT_CARD)
return (pccbb_pcic_deactivate_resource(brdev, child, type,
rid, r));
else
return (pccbb_cardbus_deactivate_resource(brdev, child, type,
rid, r));
}
static struct resource *
pccbb_alloc_resource(device_t brdev, device_t child, int type, int *rid,
u_long start, u_long end, u_long count, uint flags)
{
struct pccbb_softc *sc = device_get_softc(brdev);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (sc->flags & PCCBB_16BIT_CARD)
return (pccbb_pcic_alloc_resource(brdev, child, type, rid,
start, end, count, flags));
else
return (pccbb_cardbus_alloc_resource(brdev, child, type, rid,
start, end, count, flags));
}
static int
pccbb_release_resource(device_t brdev, device_t child, int type, int rid,
struct resource *r)
{
struct pccbb_softc *sc = device_get_softc(brdev);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (sc->flags & PCCBB_16BIT_CARD)
return (pccbb_pcic_release_resource(brdev, child, type,
rid, r));
else
return (pccbb_cardbus_release_resource(brdev, child, type,
rid, r));
}
static int
pccbb_read_ivar(device_t brdev, device_t child, int which, uintptr_t *result)
{
struct pccbb_softc *sc = device_get_softc(brdev);
switch (which) {
case PCIB_IVAR_BUS:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
*result = sc->secbus;
return (0);
}
return (ENOENT);
}
static int
pccbb_write_ivar(device_t brdev, device_t child, int which, uintptr_t value)
{
struct pccbb_softc *sc = device_get_softc(brdev);
switch (which) {
case PCIB_IVAR_BUS:
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
sc->secbus = value;
break;
}
return (ENOENT);
}
/************************************************************************/
/* PCI compat methods */
/************************************************************************/
static int
pccbb_maxslots(device_t brdev)
{
return (0);
}
static uint32_t
pccbb_read_config(device_t brdev, int b, int s, int f, int reg, int width)
{
/*
* Pass through to the next ppb up the chain (i.e. our grandparent).
*/
return (PCIB_READ_CONFIG(device_get_parent(device_get_parent(brdev)),
b, s, f, reg, width));
}
static void
pccbb_write_config(device_t brdev, int b, int s, int f, int reg, uint32_t val,
int width)
{
/*
* Pass through to the next ppb up the chain (i.e. our grandparent).
*/
PCIB_WRITE_CONFIG(device_get_parent(device_get_parent(brdev)),
b, s, f, reg, val, width);
}
static int
pccbb_suspend(device_t self)
{
int error = 0;
struct pccbb_softc* sc = device_get_softc(self);
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
bus_teardown_intr(self, sc->irq_res, sc->intrhand);
error = bus_generic_suspend(self);
return (error);
}
static int
pccbb_resume(device_t self)
{
int error = 0;
struct pccbb_softc *sc = (struct pccbb_softc *)device_get_softc(self);
uint32_t tmp;
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
pci_write_config(self, CBBR_SOCKBASE, rman_get_start(sc->base_res), 4);
DEVPRINTF((self, "PCI Memory allocated: %08lx\n",
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
rman_get_start(sc->base_res)));
pccbb_chipinit(sc);
/* re-establish the interrupt. */
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (bus_setup_intr(self, sc->irq_res, INTR_TYPE_AV, pccbb_intr, sc,
&sc->intrhand)) {
device_printf(self, "couldn't re-establish interrupt");
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
bus_release_resource(self, SYS_RES_IRQ, 0, sc->irq_res);
bus_release_resource(self, SYS_RES_MEMORY, CBBR_SOCKBASE,
sc->base_res);
sc->irq_res = NULL;
sc->base_res = NULL;
return (ENOMEM);
}
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
/* CSC Interrupt: Card detect interrupt on */
pccbb_setb(sc, CBB_SOCKET_MASK, CBB_SOCKET_MASK_CD);
/* reset interrupt */
tmp = pccbb_get(sc, CBB_SOCKET_EVENT);
pccbb_set(sc, CBB_SOCKET_EVENT, tmp);
/*
* Some BIOSes will not save the BARs for the pci chips, so we
* must do it ourselves. If the BAR is reset to 0 for an I/O
* device, it will read back as 0x1, so no explicit test for
* memory devices are needed.
*
* Note: The PCI bus code should do this automatically for us on
* suspend/resume, but until it does, we have to cope.
*/
Bulk changes made during the BSDcon kernel summit and travel afterwards. Appologies for making this one bulk commit, but I have tested all these changes together and don't want to break anything by trying to disentangle it. o Make debugging a sysctl/tunable o Remove flags word from yenta chip info, it is unused o Make 16-bit card I/O range and 32-bit card I/O range tunables o Start the rename of pccbb to cbb to match NetBSD by misc renames. o Kill the now bogus list of softcs to create kthread. Instead, just create the kthread in the attach routine. o Remove sc_ from some structure names. It isn't needed. o Refine chipset lookup code. o Match generic PCI <-> CardBus bridges. We specifically don't generically match PCI PCMCIA bridges because they are not, with one exception, yenta devices. o Add some comments about the why we need to have a function table ala OLDCARD o The PCI interrupt routing by using the ExCA registers is needed for for all bridges, per the spec, not just TI ones. o Collapse TOPIC95 and TOPIC95B. o Using the ToPIC 97 and 100 datasheets, try to support these bridges better, but more work is needed. o Generally clarify some XXX comments and add them in a few places where things didn't look right to me. o Move interrupt generating register access until after we establish an ISR. o Add support for YV and XV cards. X and Y are numbers to be determined later (but maybe never). o factor powerup code for 16-bit and 32-bit cards. o When a card supports more than one voltage, prefer the lowest supported volage. Windows does this, and MS's design guides imply this is the right thing to do. o Document race between kthread_exit(0) and kldunload's unmapping of pages that John Baldwin and I discovered. o Debounce the CSC interrupt a little better. o When a 16-bit card is inserted when we don't have a pccard child, warn about it better. Ditto for 32-bit card. o Ack ALL the interrupt bits that we get, not just 0x1. o maybe a couple minor style nits corrected.
2002-02-17 03:11:11 +00:00
if (pci_read_config(self, CBBR_SOCKBASE, 4) == 0)
pci_write_config(self, CBBR_SOCKBASE,
rman_get_start(sc->base_res), 4);
error = bus_generic_resume(self);
return (error);
}
static device_method_t pccbb_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, pccbb_probe),
DEVMETHOD(device_attach, pccbb_attach),
DEVMETHOD(device_detach, pccbb_detach),
DEVMETHOD(device_shutdown, pccbb_shutdown),
DEVMETHOD(device_suspend, pccbb_suspend),
DEVMETHOD(device_resume, pccbb_resume),
/* bus methods */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_read_ivar, pccbb_read_ivar),
DEVMETHOD(bus_write_ivar, pccbb_write_ivar),
DEVMETHOD(bus_alloc_resource, pccbb_alloc_resource),
DEVMETHOD(bus_release_resource, pccbb_release_resource),
DEVMETHOD(bus_activate_resource, pccbb_activate_resource),
DEVMETHOD(bus_deactivate_resource, pccbb_deactivate_resource),
DEVMETHOD(bus_driver_added, pccbb_driver_added),
DEVMETHOD(bus_child_detached, pccbb_child_detached),
DEVMETHOD(bus_setup_intr, pccbb_setup_intr),
DEVMETHOD(bus_teardown_intr, pccbb_teardown_intr),
/* 16-bit card interface */
DEVMETHOD(card_set_res_flags, pccbb_pcic_set_res_flags),
DEVMETHOD(card_set_memory_offset, pccbb_pcic_set_memory_offset),
DEVMETHOD(card_reprobe_card, pccbb_card_reprobe),
/* power interface */
DEVMETHOD(power_enable_socket, pccbb_power_enable_socket),
DEVMETHOD(power_disable_socket, pccbb_power_disable_socket),
/* pcib compatibility interface */
DEVMETHOD(pcib_maxslots, pccbb_maxslots),
DEVMETHOD(pcib_read_config, pccbb_read_config),
DEVMETHOD(pcib_write_config, pccbb_write_config),
{0,0}
};
static driver_t pccbb_driver = {
"pccbb",
pccbb_methods,
sizeof(struct pccbb_softc)
};
static devclass_t pccbb_devclass;
DRIVER_MODULE(pccbb, pci, pccbb_driver, pccbb_devclass, 0, 0);