d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
b8b1b424cf
freebsd-skq/sys/arm/allwinner/files.allwinner

64 lines
2.3 KiB
Plaintext
Raw Normal View History

Move the items common to all SoCs to a single file.
2015-04-18 03:07:01 +00:00
# $FreeBSD$
kern/kern_clocksource.c standard
Add AHCI attachment code for Allwinner A10/A20 SoCs. The Allwinner SoC has an AHCI device on its internal main bus rather than the PCI bus. This SoC is somewhat underdocumented, and its SATA controller is no exception. The methods to support this chip were harvested from the Linux Allwinner SDK, and then constants invented to describe what's going on based on low-level constants contained in the SATA standard and guess work. This SoC requires a specific AHCI channel setup in order to start the operations on the channel properly. Clock setup and AHCI channel setup idea came from NetBSD. Tested on Cubieboard 2 and Banana pi (and attachment on Cubieboard by Pratik Singhal). Differential Revision: https://reviews.freebsd.org/D737 Submitted by: imp Reviewed by: imp, ganbold, mav, andrew
2015-07-03 14:11:01 +00:00
arm/allwinner/a10_ahci.c optional ahci
Add an analog audio driver for the audio codec found on the Allwinner A10/A20 SoC. Based loosely on the submitters NetBSD driver, tested on Cubieboard 2. Playback and capture are supported. Submitted by: Jared McNeill <jmcneill@invisible.ca> Differential Revision: https://reviews.freebsd.org/D5202
2016-02-16 11:45:46 +00:00
arm/allwinner/a10_codec.c optional sound
Add support for the Allwinner DMA controller. This will be used by the at least the audio codec driver currently in review. Submitted by: Jared McNeill <jmcneill@invisible.ca> Differential Revision: https://reviews.freebsd.org/D5050
2016-02-15 19:56:35 +00:00
arm/allwinner/a10_dmac.c standard
Add support for the integrated DMA controller found in the Allwinner A31, A64, A83T, and H3 SoCs. Relnotes: yes
2016-11-02 23:58:10 +00:00
arm/allwinner/a31_dmac.c standard
Move the items common to all SoCs to a single file.
2015-04-18 03:07:01 +00:00
arm/allwinner/a10_ehci.c optional ehci
Add support for Allwinner A31/A31s EHCI controller and USB PHY. Reviewed by: andrew, Emmanuel Vadot <manu@bidouilliste.com> Approved by: gonzo (mentor) Differential Revision: https://reviews.freebsd.org/D5467
2016-03-01 22:54:30 +00:00
arm/allwinner/aw_usbphy.c optional ehci
Move the items common to all SoCs to a single file.
2015-04-18 03:07:01 +00:00
arm/allwinner/a10_gpio.c optional gpio
Add the MMC/SD driver for Allwinner SoCs. This is based on the patch sent by Alexander Fedorov with the following fixes/improvements: - Better error handling; - Clock is derived from PLL6 (obtained from netbsd); - No more unnecessary busy loops on interrupt handler; - style(9) fixes and code cleanup. I also want to thanks Martin Galvan who has sent an alternative implementation with some interesting fixes. Tested on CubieBoard2, Banana-Pi (thanks to netgate!) and Cubieboard1 (Pratik Singhal). This is intended to pave the way for the upcoming GSoC work (and make easier the build of images for the supported boards). PR: 196081 Submitted by: Alexander Fedorov <alexander.fedorov@rtlservice.com>
2015-05-21 17:39:42 +00:00
arm/allwinner/a10_mmc.c optional mmc
Move the items common to all SoCs to a single file.
2015-04-18 03:07:01 +00:00
arm/allwinner/a10_sramc.c standard
Add support for the Non-maskable interrupt driver found in the Allwinner A20 and A31 SoCs. This is normally used for the PMU. Reviewed by: andrew Approved by: andrew (mentor) Differential Revision: https://reviews.freebsd.org/D5663
2016-04-27 20:49:57 +00:00
arm/allwinner/aw_nmi.c optional intrng
Replace the A20 kernel config with a generic ALLWINNER kernel config that supports A20, A31, and A31S. Adds support for the BananaPi M2 (A31S) board. Submitted by: Emmanuel Vadot <manu@bidouilliste.com> Reviewed by: jmcneill Differential Revision: https://reviews.freebsd.org/D5580
2016-04-21 16:49:04 +00:00
arm/allwinner/aw_if_dwc.c optional dwc
allwinner: Add support for P2WI in RSB driver Push-Pull Two Wire interface is a almost compatible iic like bus used in sun6i SoC. It's only use is to communicate with the power management IC. Reviewed by: jmcneill MFC after: 1 week Relnotes: yes
2016-10-24 20:33:42 +00:00
arm/allwinner/aw_rsb.c optional rsb | p2wi
Add Allwinner A10/A20 RTC driver. Submitted by: Vladimir Belian <fate10@gmail.com> Reviewed by: andrew, imp, jmcneill Approved by: gonzo (mentor) Differential Revision: https://reviews.freebsd.org/D5414
2016-02-28 17:42:27 +00:00
arm/allwinner/aw_rtc.c standard
Allwinner: Add thermal sensor driver for A10/A20 The thermal sensor lives in the touch screen controller. Touch screen part isn't done for now. Temperature is read every ~2 seconds and exposed via sysctl.
2016-08-23 22:26:50 +00:00
arm/allwinner/aw_ts.c standard
Add support for the Allwinner A31 watchdog to the existing A10 watchdog driver. This mostly involves selecting the register offsets to use at runtime based on the hardware we are talking to. Submitted by: Emmanuel Vadot <manu@bidouilliste.com> Differential Revision: https://reviews.freebsd.org/D5327
2016-02-25 16:50:36 +00:00
arm/allwinner/aw_wdog.c standard
Rename allwinner_machdep.{c.h} to aw_machdep.{c.h} as all allwinner source files are name aw_*
2016-08-17 21:44:02 +00:00
arm/allwinner/aw_machdep.c standard
Replace the A20 kernel config with a generic ALLWINNER kernel config that supports A20, A31, and A31S. Adds support for the BananaPi M2 (A31S) board. Submitted by: Emmanuel Vadot <manu@bidouilliste.com> Reviewed by: jmcneill Differential Revision: https://reviews.freebsd.org/D5580
2016-04-21 16:49:04 +00:00
arm/allwinner/aw_mp.c optional smp
Add support for the AXP209 Power System Management IC. This allows boards with this and an Allwinner SoC to power off. Submitted by: Emmanuel Vadot <manu@bidouilliste.com> Differential Revision: https://reviews.freebsd.org/D4954
2016-02-15 19:31:23 +00:00
arm/allwinner/axp209.c optional axp209
Add and enable Allwinner RSB and AXP81x power management IC drivers.
2016-05-14 23:34:57 +00:00
arm/allwinner/axp81x.c optional axp81x
Add driver for Allwinner A83T/H3/A64 Gigabit Ethernet. The datasheets refer to this controller as EMAC, not to be confused with the fast ethernet controller (also named EMAC) found in A10/A20 SoCs. Tested on a BananaPi M3 (A83T), which uses an external RGMII PHY (RTL8211E). Reviewed by: adrian Differential Revision: https://reviews.freebsd.org/D6169
2016-05-04 20:06:20 +00:00
arm/allwinner/if_awg.c optional awg
Move the items common to all SoCs to a single file.
2015-04-18 03:07:01 +00:00
arm/allwinner/if_emac.c optional emac
Add support for the Allwinner DMA controller. This will be used by the at least the audio codec driver currently in review. Submitted by: Jared McNeill <jmcneill@invisible.ca> Differential Revision: https://reviews.freebsd.org/D5050
2016-02-15 19:56:35 +00:00
arm/allwinner/sunxi_dma_if.m standard
Add support for the Allwinner i2c device. This is similar to the existing Marvell twsi part, however uses different register locations, as such split the existing driver into Marvell and Allwinner attachments. While here clean a few style issues. Submitted by: Emmanuel Vadot <manu@bidouilliste.com> Differential Revision: https://reviews.freebsd.org/D4846
2016-02-15 15:11:26 +00:00
dev/iicbus/twsi/a10_twsi.c optional twsi
Add driver for "generic-ohci" as defined by FDT. If platform support EXT_RESOURCES, clocks and resets are handled out of the box. If not driver can be subclassed using the generic_usb interface. generic_usb name was choosed because at one point I'll add generic-ehci FDT driver. Reviewed by: jmcneill, hselasky Approved by: andrew (mentor) Differential Revision: https://reviews.freebsd.org/D5481
2016-05-17 17:46:12 +00:00
dev/usb/controller/generic_ohci.c optional ohci
dev/usb/controller/generic_usb_if.m optional ohci
Add Allwinner A83T thermal sensor controller support. The A83T thermal sensor controller has three sensors. Sensor 0 corresponds to CPU cluster 0, sensor 1 to CPU cluster 1, and sensor 2 to the GPU. This driver exports the temperature sensor readings via sysctl. Calibration data is obtained from SRAM found in the Secure ID module. Reviewed by: manu Differential Revision: https://reviews.freebsd.org/D6378
2016-05-15 22:36:55 +00:00
arm/allwinner/aw_sid.c standard
arm/allwinner/aw_thermal.c standard
Add sy8106a to Allwinner kernel. This regulator is used to control VDD_CPUX and is connected to R_TWI on some H3-based Orange Pi boards.
2016-09-05 13:45:45 +00:00
dev/iicbus/sy8106a.c optional sy8106a
Add support for Allwinner Consumer IR interface. RX is supported now and the driver is using evdev framework. It was tested on Cubieboard2 (A20 SoC) using lirc with dfrobot's IR remote controller.
2016-10-27 04:26:33 +00:00
arm/allwinner/aw_cir.c optional aw_cir evdev
Start to rename files with common or generic names to be SoC specific. The build system doesn't handle two files with the same name.
2017-06-04 09:11:14 +00:00
#arm/allwinner/aw_console.c standard
Add Allwinner A20 HDMI support. The HDMI driver will attach a framebuffer device when a display is connected. If the EDID can be read and contains a preferred mode, it will be used. Otherwise the framebuffer will default to 800x600. In addition, if the EDID contains a CEA-861 extension block and the "basic audio" flag is set, audio playback at 48kHz 16-bit stereo is enabled on the controller. Reviewed by: andrew Approved by: gonzo (mentor) Differential Revision: https://reviews.freebsd.org/D5383
2016-02-25 20:17:18 +00:00
arm/allwinner/a10_fb.c optional vt
arm/allwinner/a10_hdmi.c optional hdmi
arm/allwinner/a10_hdmiaudio.c optional hdmi sound
Split the DesignWare HDMI-specific code from imx6_hdmi.c into a separate file and add a generic DT binding that takes advantage of the extres framework for setting up clocks. Reviewed by: gonzo Differential Revision: https://reviews.freebsd.org/D8826
2016-12-20 01:34:29 +00:00
dev/hdmi/hdmi_if.m optional hdmi
Convert Allwinner port to extres clk/hwreset/regulator APIs. Reviewed by: andrew, gonzo, Emmanuel Vadot <manu@bidouilliste.com> Approved by: gonzo (mentor) Differential Revision: https://reviews.freebsd.org/D5752
2016-04-06 23:11:03 +00:00
arm/allwinner/aw_reset.c standard
arm/allwinner/aw_ccu.c standard
arm/allwinner/clk/aw_ahbclk.c standard
arm/allwinner/clk/aw_apbclk.c standard
arm/allwinner/clk/aw_axiclk.c standard
arm/allwinner/clk/aw_codecclk.c standard
arm/allwinner/clk/aw_cpuclk.c standard
Add support for the Allwinner A83T (sun8iw6p1) SoC. Clocks, GPIO, UART, SD card / eMMC, USB, watchdog, and ethernet are supported. Note that the A83T contains two clusters of four Cortex-A7 CPUs, and only CPUs in first cluster are started for now. Tested on a Sinovoip Banana Pi BPI-M3.
2016-05-05 09:41:57 +00:00
arm/allwinner/clk/aw_cpusclk.c standard
Convert Allwinner port to extres clk/hwreset/regulator APIs. Reviewed by: andrew, gonzo, Emmanuel Vadot <manu@bidouilliste.com> Approved by: gonzo (mentor) Differential Revision: https://reviews.freebsd.org/D5752
2016-04-06 23:11:03 +00:00
arm/allwinner/clk/aw_debeclk.c standard
arm/allwinner/clk/aw_gate.c standard
arm/allwinner/clk/aw_gmacclk.c standard
arm/allwinner/clk/aw_hdmiclk.c standard
arm/allwinner/clk/aw_lcdclk.c standard
arm/allwinner/clk/aw_modclk.c standard
arm/allwinner/clk/aw_mmcclk.c standard
arm/allwinner/clk/aw_oscclk.c standard
arm/allwinner/clk/aw_pll.c standard
Add support for the Allwinner H3 Thermal Sensor Controller. The H3 embeds a single thermal sensor located in the CPU.
2016-09-05 11:05:14 +00:00
arm/allwinner/clk/aw_thsclk.c standard
Convert Allwinner port to extres clk/hwreset/regulator APIs. Reviewed by: andrew, gonzo, Emmanuel Vadot <manu@bidouilliste.com> Approved by: gonzo (mentor) Differential Revision: https://reviews.freebsd.org/D5752
2016-04-06 23:11:03 +00:00
arm/allwinner/clk/aw_usbclk.c standard
Add clkng driver for Allwinner SoC Since Linux 4.9-4.10 DTS doesn't have clocks under /clocks but only a ccu node. Currently only H3 is supported with almost the same state as HEAD. (video pll aren't supported for now but we don't support video). This driver and clocks will also be used for other SoC (A64, A31, H5, H2 etc ...) Reviewed by: jmcneill Differential Revision: https://reviews.freebsd.org/D9517
2017-02-26 16:00:20 +00:00
arm/allwinner/clkng/aw_ccung.c standard
arm/allwinner/clkng/aw_clk_nkmp.c standard
arm/allwinner/clkng/aw_clk_nm.c standard
arm/allwinner/clkng/aw_clk_prediv_mux.c standard
Reference in New Issue Copy Permalink