freebsd-skq/sys/dev/dpaa/bman.c

370 lines
7.7 KiB
C
Raw Normal View History

Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
/*-
* Copyright (c) 2011-2012 Semihalf.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/bus.h>
#include <sys/lock.h>
#include <sys/module.h>
#include <sys/mutex.h>
#include <sys/proc.h>
#include <sys/pcpu.h>
#include <sys/rman.h>
#include <sys/sched.h>
#include <machine/tlb.h>
#include "bman.h"
devclass_t bman_devclass;
static struct bman_softc *bman_sc;
extern t_Handle bman_portal_setup(struct bman_softc *bsc);
static void
bman_exception(t_Handle h_App, e_BmExceptions exception)
{
struct bman_softc *sc;
const char *message;
sc = h_App;
switch (exception) {
case e_BM_EX_INVALID_COMMAND:
message = "Invalid Command Verb";
break;
case e_BM_EX_FBPR_THRESHOLD:
message = "FBPR pool exhaused. Consider increasing "
"BMAN_MAX_BUFFERS";
break;
case e_BM_EX_SINGLE_ECC:
message = "Single bit ECC error";
break;
case e_BM_EX_MULTI_ECC:
message = "Multi bit ECC error";
break;
default:
message = "Unknown error";
}
device_printf(sc->sc_dev, "BMAN Exception: %s.\n", message);
}
int
bman_attach(device_t dev)
{
struct bman_softc *sc;
t_BmRevisionInfo rev;
t_Error error;
t_BmParam bp;
sc = device_get_softc(dev);
sc->sc_dev = dev;
bman_sc = sc;
/* Check if MallocSmart allocator is ready */
if (XX_MallocSmartInit() != E_OK)
return (ENXIO);
/* Allocate resources */
sc->sc_rrid = 0;
sc->sc_rres = bus_alloc_resource(dev, SYS_RES_MEMORY,
&sc->sc_rrid, 0, ~0, BMAN_CCSR_SIZE, RF_ACTIVE);
if (sc->sc_rres == NULL)
return (ENXIO);
sc->sc_irid = 0;
sc->sc_ires = bus_alloc_resource_any(sc->sc_dev, SYS_RES_IRQ,
&sc->sc_irid, RF_ACTIVE | RF_SHAREABLE);
if (sc->sc_ires == NULL)
goto err;
/* Initialize BMAN */
memset(&bp, 0, sizeof(bp));
bp.guestId = NCSW_MASTER_ID;
bp.baseAddress = rman_get_bushandle(sc->sc_rres);
bp.totalNumOfBuffers = BMAN_MAX_BUFFERS;
bp.f_Exception = bman_exception;
bp.h_App = sc;
bp.errIrq = (uintptr_t)sc->sc_ires;
Add support for the Freescale dTSEC DPAA-based ethernet controller. Freescale's QorIQ line includes a new ethernet controller, based on their Datapath Acceleration Architecture (DPAA). This uses a combination of a Frame manager, Buffer manager, and Queue manager to improve performance across all interfaces by being able to pass data directly between hardware acceleration interfaces. As part of this import, Freescale's Netcomm Software (ncsw) driver is imported. This was an attempt by Freescale to create an OS-agnostic sub-driver for managing the hardware, using shims to interface to the OS-specific APIs. This work was abandoned, and Freescale's primary work is in the Linux driver (dual BSD/GPL license). Hence, this was imported directly to sys/contrib, rather than going through the vendor area. Going forward, FreeBSD-specific changes may be made to the ncsw code, diverging from the upstream in potentially incompatible ways. An alternative could be to import the Linux driver itself, using the linuxKPI layer, as that would maintain parity with the vendor-maintained driver. However, the Linux driver has not been evaluated for reliability yet, and may have issues with the import, whereas the ncsw-based driver in this commit was completed by Semihalf 4 years ago, and is very stable. Other SoC modules based on DPAA, which could be added in the future: * Security and Encryption engine (SEC4.x, SEC5.x) * RAID engine Additional work to be done: * Implement polling mode * Test vlan support * Add support for the Pattern Matching Engine, which can do regular expression matching on packets. This driver has been tested on the P5020 QorIQ SoC. Others listed in the dtsec(4) manual page are expected to work as the same DPAA engine is included in all. Obtained from: Semihalf Relnotes: Yes Sponsored by: Alex Perez/Inertial Computing
2016-02-29 03:38:00 +00:00
bp.partBpidBase = 0;
bp.partNumOfPools = BM_MAX_NUM_OF_POOLS;
sc->sc_bh = BM_Config(&bp);
if (sc->sc_bh == NULL)
goto err;
/* Warn if there is less than 5% free FPBR's in pool */
error = BM_ConfigFbprThreshold(sc->sc_bh, (BMAN_MAX_BUFFERS / 8) / 20);
if (error != E_OK)
goto err;
error = BM_Init(sc->sc_bh);
if (error != E_OK)
goto err;
error = BM_GetRevision(sc->sc_bh, &rev);
if (error != E_OK)
goto err;
device_printf(dev, "Hardware version: %d.%d.\n",
rev.majorRev, rev.minorRev);
return (0);
err:
bman_detach(dev);
return (ENXIO);
}
int
bman_detach(device_t dev)
{
struct bman_softc *sc;
sc = device_get_softc(dev);
if (sc->sc_bh != NULL)
BM_Free(sc->sc_bh);
if (sc->sc_ires != NULL)
bus_release_resource(dev, SYS_RES_IRQ,
sc->sc_irid, sc->sc_ires);
if (sc->sc_rres != NULL)
bus_release_resource(dev, SYS_RES_MEMORY,
sc->sc_rrid, sc->sc_rres);
return (0);
}
int
bman_suspend(device_t dev)
{
return (0);
}
int
bman_resume(device_t dev)
{
return (0);
}
int
bman_shutdown(device_t dev)
{
return (0);
}
/*
* BMAN API
*/
t_Handle
bman_pool_create(uint8_t *bpid, uint16_t bufferSize, uint16_t maxBuffers,
uint16_t minBuffers, uint16_t allocBuffers, t_GetBufFunction *f_GetBuf,
t_PutBufFunction *f_PutBuf, uint32_t dep_sw_entry, uint32_t dep_sw_exit,
uint32_t dep_hw_entry, uint32_t dep_hw_exit,
t_BmDepletionCallback *f_Depletion, t_Handle h_BufferPool,
t_PhysToVirt *f_PhysToVirt, t_VirtToPhys *f_VirtToPhys)
{
uint32_t thresholds[MAX_DEPLETION_THRESHOLDS];
struct bman_softc *sc;
t_Handle pool, portal;
t_BmPoolParam bpp;
int error;
sc = bman_sc;
pool = NULL;
sched_pin();
portal = bman_portal_setup(sc);
if (portal == NULL)
goto err;
memset(&bpp, 0, sizeof(bpp));
bpp.h_Bm = sc->sc_bh;
bpp.h_BmPortal = portal;
bpp.h_App = h_BufferPool;
bpp.numOfBuffers = allocBuffers;
bpp.bufferPoolInfo.h_BufferPool = h_BufferPool;
bpp.bufferPoolInfo.f_GetBuf = f_GetBuf;
bpp.bufferPoolInfo.f_PutBuf = f_PutBuf;
bpp.bufferPoolInfo.f_PhysToVirt = f_PhysToVirt;
bpp.bufferPoolInfo.f_VirtToPhys = f_VirtToPhys;
bpp.bufferPoolInfo.bufferSize = bufferSize;
pool = BM_POOL_Config(&bpp);
if (pool == NULL)
goto err;
/*
* Buffer context must be disabled on FreeBSD
* as it could cause memory corruption.
*/
BM_POOL_ConfigBuffContextMode(pool, 0);
if (minBuffers != 0 || maxBuffers != 0) {
error = BM_POOL_ConfigStockpile(pool, maxBuffers, minBuffers);
if (error != E_OK)
goto err;
}
if (f_Depletion != NULL) {
thresholds[BM_POOL_DEP_THRESH_SW_ENTRY] = dep_sw_entry;
thresholds[BM_POOL_DEP_THRESH_SW_EXIT] = dep_sw_exit;
thresholds[BM_POOL_DEP_THRESH_HW_ENTRY] = dep_hw_entry;
thresholds[BM_POOL_DEP_THRESH_HW_EXIT] = dep_hw_exit;
error = BM_POOL_ConfigDepletion(pool, f_Depletion, thresholds);
if (error != E_OK)
goto err;
}
error = BM_POOL_Init(pool);
if (error != E_OK)
goto err;
*bpid = BM_POOL_GetId(pool);
sc->sc_bpool_cpu[*bpid] = PCPU_GET(cpuid);
sched_unpin();
return (pool);
err:
if (pool != NULL)
BM_POOL_Free(pool);
sched_unpin();
return (NULL);
}
int
bman_pool_destroy(t_Handle pool)
{
struct bman_softc *sc;
sc = bman_sc;
thread_lock(curthread);
sched_bind(curthread, sc->sc_bpool_cpu[BM_POOL_GetId(pool)]);
thread_unlock(curthread);
BM_POOL_Free(pool);
thread_lock(curthread);
sched_unbind(curthread);
thread_unlock(curthread);
return (0);
}
int
bman_pool_fill(t_Handle pool, uint16_t nbufs)
{
struct bman_softc *sc;
t_Handle portal;
int error;
sc = bman_sc;
sched_pin();
portal = bman_portal_setup(sc);
if (portal == NULL) {
sched_unpin();
return (EIO);
}
error = BM_POOL_FillBufs(pool, portal, nbufs);
sched_unpin();
return ((error == E_OK) ? 0 : EIO);
}
void *
bman_get_buffer(t_Handle pool)
{
struct bman_softc *sc;
t_Handle portal;
void *buffer;
sc = bman_sc;
sched_pin();
portal = bman_portal_setup(sc);
if (portal == NULL) {
sched_unpin();
return (NULL);
}
buffer = BM_POOL_GetBuf(pool, portal);
sched_unpin();
return (buffer);
}
int
bman_put_buffer(t_Handle pool, void *buffer)
{
struct bman_softc *sc;
t_Handle portal;
int error;
sc = bman_sc;
sched_pin();
portal = bman_portal_setup(sc);
if (portal == NULL) {
sched_unpin();
return (EIO);
}
error = BM_POOL_PutBuf(pool, portal, buffer);
sched_unpin();
return ((error == E_OK) ? 0 : EIO);
}
uint32_t
bman_count(t_Handle pool)
{
return (BM_POOL_GetCounter(pool, e_BM_POOL_COUNTERS_CONTENT));
}