Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
/*-
|
|
|
|
* Copyright (c) 2007 Doug Rabson
|
|
|
|
* All rights reserved.
|
|
|
|
*
|
|
|
|
* Redistribution and use in source and binary forms, with or without
|
|
|
|
* modification, are permitted provided that the following conditions
|
|
|
|
* are met:
|
|
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer.
|
|
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
|
|
* documentation and/or other materials provided with the distribution.
|
|
|
|
*
|
|
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
|
|
* SUCH DAMAGE.
|
|
|
|
*
|
|
|
|
* $FreeBSD$
|
|
|
|
*/
|
|
|
|
|
|
|
|
#include <sys/cdefs.h>
|
|
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Stand-alone file reading package.
|
|
|
|
*/
|
|
|
|
|
2012-08-05 14:48:28 +00:00
|
|
|
#include <sys/disk.h>
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
#include <sys/param.h>
|
|
|
|
#include <sys/time.h>
|
|
|
|
#include <sys/queue.h>
|
2012-08-05 14:48:28 +00:00
|
|
|
#include <part.h>
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
#include <stddef.h>
|
|
|
|
#include <stdarg.h>
|
|
|
|
#include <string.h>
|
|
|
|
#include <stand.h>
|
|
|
|
#include <bootstrap.h>
|
|
|
|
|
2012-05-12 09:03:30 +00:00
|
|
|
#include "libzfs.h"
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
|
2012-05-12 09:03:30 +00:00
|
|
|
#include "zfsimpl.c"
|
2010-09-17 22:51:45 +00:00
|
|
|
|
2015-12-31 20:00:53 +00:00
|
|
|
/* Define the range of indexes to be populated with ZFS Boot Environments */
|
|
|
|
#define ZFS_BE_FIRST 4
|
|
|
|
#define ZFS_BE_LAST 8
|
|
|
|
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
static int zfs_open(const char *path, struct open_file *f);
|
|
|
|
static int zfs_write(struct open_file *f, void *buf, size_t size, size_t *resid);
|
|
|
|
static int zfs_close(struct open_file *f);
|
|
|
|
static int zfs_read(struct open_file *f, void *buf, size_t size, size_t *resid);
|
|
|
|
static off_t zfs_seek(struct open_file *f, off_t offset, int where);
|
|
|
|
static int zfs_stat(struct open_file *f, struct stat *sb);
|
|
|
|
static int zfs_readdir(struct open_file *f, struct dirent *d);
|
|
|
|
|
|
|
|
struct devsw zfs_dev;
|
|
|
|
|
|
|
|
struct fs_ops zfs_fsops = {
|
|
|
|
"zfs",
|
|
|
|
zfs_open,
|
|
|
|
zfs_close,
|
|
|
|
zfs_read,
|
|
|
|
zfs_write,
|
|
|
|
zfs_seek,
|
|
|
|
zfs_stat,
|
|
|
|
zfs_readdir
|
|
|
|
};
|
|
|
|
|
|
|
|
/*
|
|
|
|
* In-core open file.
|
|
|
|
*/
|
|
|
|
struct file {
|
|
|
|
off_t f_seekp; /* seek pointer */
|
|
|
|
dnode_phys_t f_dnode;
|
|
|
|
uint64_t f_zap_type; /* zap type for readdir */
|
|
|
|
uint64_t f_num_leafs; /* number of fzap leaf blocks */
|
|
|
|
zap_leaf_phys_t *f_zap_leaf; /* zap leaf buffer */
|
|
|
|
};
|
|
|
|
|
2015-12-31 20:00:53 +00:00
|
|
|
static int zfs_env_index;
|
|
|
|
static int zfs_env_count;
|
|
|
|
|
|
|
|
SLIST_HEAD(zfs_be_list, zfs_be_entry) zfs_be_head = SLIST_HEAD_INITIALIZER(zfs_be_head);
|
|
|
|
struct zfs_be_list *zfs_be_headp;
|
|
|
|
struct zfs_be_entry {
|
|
|
|
const char *name;
|
|
|
|
SLIST_ENTRY(zfs_be_entry) entries;
|
|
|
|
} *zfs_be, *zfs_be_tmp;
|
|
|
|
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
/*
|
|
|
|
* Open a file.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
zfs_open(const char *upath, struct open_file *f)
|
|
|
|
{
|
2012-05-12 09:03:30 +00:00
|
|
|
struct zfsmount *mount = (struct zfsmount *)f->f_devdata;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
struct file *fp;
|
|
|
|
int rc;
|
|
|
|
|
2012-05-13 10:54:43 +00:00
|
|
|
if (f->f_dev != &zfs_dev)
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
return (EINVAL);
|
|
|
|
|
|
|
|
/* allocate file system specific data structure */
|
|
|
|
fp = malloc(sizeof(struct file));
|
|
|
|
bzero(fp, sizeof(struct file));
|
|
|
|
f->f_fsdata = (void *)fp;
|
|
|
|
|
2012-05-12 09:03:30 +00:00
|
|
|
rc = zfs_lookup(mount, upath, &fp->f_dnode);
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
fp->f_seekp = 0;
|
|
|
|
if (rc) {
|
|
|
|
f->f_fsdata = NULL;
|
|
|
|
free(fp);
|
|
|
|
}
|
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
zfs_close(struct open_file *f)
|
|
|
|
{
|
|
|
|
struct file *fp = (struct file *)f->f_fsdata;
|
|
|
|
|
2017-02-22 02:35:59 +00:00
|
|
|
dnode_cache_obj = NULL;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
f->f_fsdata = (void *)0;
|
|
|
|
if (fp == (struct file *)0)
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
free(fp);
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Copy a portion of a file into kernel memory.
|
|
|
|
* Cross block boundaries when necessary.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
zfs_read(struct open_file *f, void *start, size_t size, size_t *resid /* out */)
|
|
|
|
{
|
2012-05-13 09:22:18 +00:00
|
|
|
const spa_t *spa = ((struct zfsmount *)f->f_devdata)->spa;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
struct file *fp = (struct file *)f->f_fsdata;
|
2011-02-27 19:41:40 +00:00
|
|
|
struct stat sb;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
size_t n;
|
|
|
|
int rc;
|
|
|
|
|
2011-02-27 19:41:40 +00:00
|
|
|
rc = zfs_stat(f, &sb);
|
|
|
|
if (rc)
|
|
|
|
return (rc);
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
n = size;
|
2011-02-27 19:41:40 +00:00
|
|
|
if (fp->f_seekp + n > sb.st_size)
|
|
|
|
n = sb.st_size - fp->f_seekp;
|
2016-01-06 20:25:41 +00:00
|
|
|
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
rc = dnode_read(spa, &fp->f_dnode, fp->f_seekp, start, n);
|
|
|
|
if (rc)
|
|
|
|
return (rc);
|
|
|
|
|
|
|
|
if (0) {
|
|
|
|
int i;
|
|
|
|
for (i = 0; i < n; i++)
|
|
|
|
putchar(((char*) start)[i]);
|
|
|
|
}
|
|
|
|
fp->f_seekp += n;
|
|
|
|
if (resid)
|
|
|
|
*resid = size - n;
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Don't be silly - the bootstrap has no business writing anything.
|
|
|
|
*/
|
|
|
|
static int
|
|
|
|
zfs_write(struct open_file *f, void *start, size_t size, size_t *resid /* out */)
|
|
|
|
{
|
|
|
|
|
|
|
|
return (EROFS);
|
|
|
|
}
|
|
|
|
|
|
|
|
static off_t
|
|
|
|
zfs_seek(struct open_file *f, off_t offset, int where)
|
|
|
|
{
|
|
|
|
struct file *fp = (struct file *)f->f_fsdata;
|
|
|
|
|
|
|
|
switch (where) {
|
|
|
|
case SEEK_SET:
|
|
|
|
fp->f_seekp = offset;
|
|
|
|
break;
|
|
|
|
case SEEK_CUR:
|
|
|
|
fp->f_seekp += offset;
|
|
|
|
break;
|
|
|
|
case SEEK_END:
|
2011-02-27 19:41:40 +00:00
|
|
|
{
|
|
|
|
struct stat sb;
|
|
|
|
int error;
|
|
|
|
|
|
|
|
error = zfs_stat(f, &sb);
|
|
|
|
if (error != 0) {
|
|
|
|
errno = error;
|
|
|
|
return (-1);
|
|
|
|
}
|
|
|
|
fp->f_seekp = sb.st_size - offset;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
break;
|
2011-02-27 19:41:40 +00:00
|
|
|
}
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
default:
|
|
|
|
errno = EINVAL;
|
|
|
|
return (-1);
|
|
|
|
}
|
|
|
|
return (fp->f_seekp);
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
zfs_stat(struct open_file *f, struct stat *sb)
|
|
|
|
{
|
2012-05-13 09:22:18 +00:00
|
|
|
const spa_t *spa = ((struct zfsmount *)f->f_devdata)->spa;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
struct file *fp = (struct file *)f->f_fsdata;
|
|
|
|
|
2011-02-27 19:41:40 +00:00
|
|
|
return (zfs_dnode_stat(spa, &fp->f_dnode, sb));
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
zfs_readdir(struct open_file *f, struct dirent *d)
|
|
|
|
{
|
2012-05-13 09:22:18 +00:00
|
|
|
const spa_t *spa = ((struct zfsmount *)f->f_devdata)->spa;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
struct file *fp = (struct file *)f->f_fsdata;
|
|
|
|
mzap_ent_phys_t mze;
|
2011-02-27 19:41:40 +00:00
|
|
|
struct stat sb;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
size_t bsize = fp->f_dnode.dn_datablkszsec << SPA_MINBLOCKSHIFT;
|
|
|
|
int rc;
|
|
|
|
|
2011-02-27 19:41:40 +00:00
|
|
|
rc = zfs_stat(f, &sb);
|
|
|
|
if (rc)
|
|
|
|
return (rc);
|
|
|
|
if (!S_ISDIR(sb.st_mode))
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
return (ENOTDIR);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* If this is the first read, get the zap type.
|
|
|
|
*/
|
|
|
|
if (fp->f_seekp == 0) {
|
|
|
|
rc = dnode_read(spa, &fp->f_dnode,
|
|
|
|
0, &fp->f_zap_type, sizeof(fp->f_zap_type));
|
|
|
|
if (rc)
|
|
|
|
return (rc);
|
|
|
|
|
|
|
|
if (fp->f_zap_type == ZBT_MICRO) {
|
|
|
|
fp->f_seekp = offsetof(mzap_phys_t, mz_chunk);
|
|
|
|
} else {
|
|
|
|
rc = dnode_read(spa, &fp->f_dnode,
|
|
|
|
offsetof(zap_phys_t, zap_num_leafs),
|
|
|
|
&fp->f_num_leafs,
|
|
|
|
sizeof(fp->f_num_leafs));
|
|
|
|
if (rc)
|
|
|
|
return (rc);
|
|
|
|
|
|
|
|
fp->f_seekp = bsize;
|
|
|
|
fp->f_zap_leaf = (zap_leaf_phys_t *)malloc(bsize);
|
|
|
|
rc = dnode_read(spa, &fp->f_dnode,
|
|
|
|
fp->f_seekp,
|
|
|
|
fp->f_zap_leaf,
|
|
|
|
bsize);
|
|
|
|
if (rc)
|
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
if (fp->f_zap_type == ZBT_MICRO) {
|
|
|
|
mzap_next:
|
|
|
|
if (fp->f_seekp >= bsize)
|
|
|
|
return (ENOENT);
|
|
|
|
|
|
|
|
rc = dnode_read(spa, &fp->f_dnode,
|
|
|
|
fp->f_seekp, &mze, sizeof(mze));
|
2010-05-31 09:06:03 +00:00
|
|
|
if (rc)
|
|
|
|
return (rc);
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
fp->f_seekp += sizeof(mze);
|
|
|
|
|
|
|
|
if (!mze.mze_name[0])
|
|
|
|
goto mzap_next;
|
|
|
|
|
|
|
|
d->d_fileno = ZFS_DIRENT_OBJ(mze.mze_value);
|
|
|
|
d->d_type = ZFS_DIRENT_TYPE(mze.mze_value);
|
|
|
|
strcpy(d->d_name, mze.mze_name);
|
|
|
|
d->d_namlen = strlen(d->d_name);
|
|
|
|
return (0);
|
|
|
|
} else {
|
|
|
|
zap_leaf_t zl;
|
|
|
|
zap_leaf_chunk_t *zc, *nc;
|
|
|
|
int chunk;
|
|
|
|
size_t namelen;
|
|
|
|
char *p;
|
|
|
|
uint64_t value;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Initialise this so we can use the ZAP size
|
|
|
|
* calculating macros.
|
|
|
|
*/
|
|
|
|
zl.l_bs = ilog2(bsize);
|
|
|
|
zl.l_phys = fp->f_zap_leaf;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Figure out which chunk we are currently looking at
|
|
|
|
* and consider seeking to the next leaf. We use the
|
|
|
|
* low bits of f_seekp as a simple chunk index.
|
|
|
|
*/
|
|
|
|
fzap_next:
|
|
|
|
chunk = fp->f_seekp & (bsize - 1);
|
|
|
|
if (chunk == ZAP_LEAF_NUMCHUNKS(&zl)) {
|
2016-04-21 19:57:40 +00:00
|
|
|
fp->f_seekp = rounddown2(fp->f_seekp, bsize) + bsize;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
chunk = 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Check for EOF and read the new leaf.
|
|
|
|
*/
|
|
|
|
if (fp->f_seekp >= bsize * fp->f_num_leafs)
|
|
|
|
return (ENOENT);
|
|
|
|
|
|
|
|
rc = dnode_read(spa, &fp->f_dnode,
|
|
|
|
fp->f_seekp,
|
|
|
|
fp->f_zap_leaf,
|
|
|
|
bsize);
|
|
|
|
if (rc)
|
|
|
|
return (rc);
|
|
|
|
}
|
|
|
|
|
|
|
|
zc = &ZAP_LEAF_CHUNK(&zl, chunk);
|
|
|
|
fp->f_seekp++;
|
|
|
|
if (zc->l_entry.le_type != ZAP_CHUNK_ENTRY)
|
|
|
|
goto fzap_next;
|
|
|
|
|
2012-09-11 07:11:32 +00:00
|
|
|
namelen = zc->l_entry.le_name_numints;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
if (namelen > sizeof(d->d_name))
|
|
|
|
namelen = sizeof(d->d_name);
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Paste the name back together.
|
|
|
|
*/
|
|
|
|
nc = &ZAP_LEAF_CHUNK(&zl, zc->l_entry.le_name_chunk);
|
|
|
|
p = d->d_name;
|
|
|
|
while (namelen > 0) {
|
|
|
|
int len;
|
|
|
|
len = namelen;
|
|
|
|
if (len > ZAP_LEAF_ARRAY_BYTES)
|
|
|
|
len = ZAP_LEAF_ARRAY_BYTES;
|
|
|
|
memcpy(p, nc->l_array.la_array, len);
|
|
|
|
p += len;
|
|
|
|
namelen -= len;
|
|
|
|
nc = &ZAP_LEAF_CHUNK(&zl, nc->l_array.la_next);
|
|
|
|
}
|
|
|
|
d->d_name[sizeof(d->d_name) - 1] = 0;
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Assume the first eight bytes of the value are
|
|
|
|
* a uint64_t.
|
|
|
|
*/
|
|
|
|
value = fzap_leaf_value(&zl, zc);
|
|
|
|
|
|
|
|
d->d_fileno = ZFS_DIRENT_OBJ(value);
|
|
|
|
d->d_type = ZFS_DIRENT_TYPE(value);
|
|
|
|
d->d_namlen = strlen(d->d_name);
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
2017-11-02 08:47:03 +00:00
|
|
|
vdev_read(vdev_t *vdev, void *priv, off_t offset, void *buf, size_t bytes)
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
{
|
2017-11-02 08:47:03 +00:00
|
|
|
int fd, ret;
|
|
|
|
size_t res, size, remainder, rb_size, blksz;
|
|
|
|
unsigned secsz;
|
|
|
|
off_t off;
|
|
|
|
char *bouncebuf, *rb_buf;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
|
|
|
|
fd = (uintptr_t) priv;
|
2017-11-02 08:47:03 +00:00
|
|
|
bouncebuf = NULL;
|
|
|
|
|
|
|
|
ret = ioctl(fd, DIOCGSECTORSIZE, &secsz);
|
|
|
|
if (ret != 0)
|
|
|
|
return (ret);
|
|
|
|
|
|
|
|
off = offset / secsz;
|
|
|
|
remainder = offset % secsz;
|
|
|
|
if (lseek(fd, off * secsz, SEEK_SET) == -1)
|
|
|
|
return (errno);
|
|
|
|
|
|
|
|
rb_buf = buf;
|
|
|
|
rb_size = bytes;
|
|
|
|
size = roundup2(bytes + remainder, secsz);
|
|
|
|
blksz = size;
|
|
|
|
if (remainder != 0 || size != bytes) {
|
|
|
|
bouncebuf = zfs_alloc(secsz);
|
|
|
|
if (bouncebuf == NULL) {
|
|
|
|
printf("vdev_read: out of memory\n");
|
|
|
|
return (ENOMEM);
|
|
|
|
}
|
|
|
|
rb_buf = bouncebuf;
|
|
|
|
blksz = rb_size - remainder;
|
|
|
|
}
|
|
|
|
|
|
|
|
while (bytes > 0) {
|
|
|
|
res = read(fd, rb_buf, rb_size);
|
|
|
|
if (res != rb_size) {
|
|
|
|
ret = EIO;
|
|
|
|
goto error;
|
|
|
|
}
|
|
|
|
if (bytes < blksz)
|
|
|
|
blksz = bytes;
|
|
|
|
if (bouncebuf != NULL)
|
|
|
|
memcpy(buf, rb_buf + remainder, blksz);
|
|
|
|
buf = (void *)((uintptr_t)buf + blksz);
|
|
|
|
bytes -= blksz;
|
|
|
|
remainder = 0;
|
|
|
|
blksz = rb_size;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
}
|
2017-11-02 08:47:03 +00:00
|
|
|
|
|
|
|
ret = 0;
|
|
|
|
error:
|
|
|
|
if (bouncebuf != NULL)
|
|
|
|
zfs_free(bouncebuf, secsz);
|
|
|
|
return (ret);
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
}
|
|
|
|
|
2012-05-12 09:03:30 +00:00
|
|
|
static int
|
|
|
|
zfs_dev_init(void)
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
{
|
2012-10-06 19:40:12 +00:00
|
|
|
spa_t *spa;
|
|
|
|
spa_t *next;
|
|
|
|
spa_t *prev;
|
|
|
|
|
2012-05-12 09:03:30 +00:00
|
|
|
zfs_init();
|
|
|
|
if (archsw.arch_zfs_probe == NULL)
|
|
|
|
return (ENXIO);
|
|
|
|
archsw.arch_zfs_probe();
|
2012-10-06 19:40:12 +00:00
|
|
|
|
|
|
|
prev = NULL;
|
|
|
|
spa = STAILQ_FIRST(&zfs_pools);
|
|
|
|
while (spa != NULL) {
|
|
|
|
next = STAILQ_NEXT(spa, spa_link);
|
|
|
|
if (zfs_spa_init(spa)) {
|
|
|
|
if (prev == NULL)
|
|
|
|
STAILQ_REMOVE_HEAD(&zfs_pools, spa_link);
|
|
|
|
else
|
|
|
|
STAILQ_REMOVE_AFTER(&zfs_pools, prev, spa_link);
|
|
|
|
} else
|
|
|
|
prev = spa;
|
|
|
|
spa = next;
|
|
|
|
}
|
2012-05-12 09:03:30 +00:00
|
|
|
return (0);
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
}
|
|
|
|
|
2012-08-05 14:48:28 +00:00
|
|
|
struct zfs_probe_args {
|
|
|
|
int fd;
|
|
|
|
const char *devname;
|
|
|
|
uint64_t *pool_guid;
|
2016-01-11 15:35:29 +00:00
|
|
|
u_int secsz;
|
2012-08-05 14:48:28 +00:00
|
|
|
};
|
|
|
|
|
|
|
|
static int
|
2017-02-01 20:10:56 +00:00
|
|
|
zfs_diskread(void *arg, void *buf, size_t blocks, uint64_t offset)
|
2012-08-05 14:48:28 +00:00
|
|
|
{
|
|
|
|
struct zfs_probe_args *ppa;
|
|
|
|
|
|
|
|
ppa = (struct zfs_probe_args *)arg;
|
|
|
|
return (vdev_read(NULL, (void *)(uintptr_t)ppa->fd,
|
|
|
|
offset * ppa->secsz, buf, blocks * ppa->secsz));
|
|
|
|
}
|
|
|
|
|
|
|
|
static int
|
|
|
|
zfs_probe(int fd, uint64_t *pool_guid)
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
{
|
2012-05-12 09:03:30 +00:00
|
|
|
spa_t *spa;
|
|
|
|
int ret;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
|
2012-05-12 09:03:30 +00:00
|
|
|
ret = vdev_probe(vdev_read, (void *)(uintptr_t)fd, &spa);
|
2012-08-05 14:48:28 +00:00
|
|
|
if (ret == 0 && pool_guid != NULL)
|
2012-05-12 09:03:30 +00:00
|
|
|
*pool_guid = spa->spa_guid;
|
2012-08-05 14:48:28 +00:00
|
|
|
return (ret);
|
|
|
|
}
|
|
|
|
|
2016-05-18 05:59:05 +00:00
|
|
|
static int
|
2012-08-05 14:48:28 +00:00
|
|
|
zfs_probe_partition(void *arg, const char *partname,
|
|
|
|
const struct ptable_entry *part)
|
|
|
|
{
|
|
|
|
struct zfs_probe_args *ppa, pa;
|
|
|
|
struct ptable *table;
|
|
|
|
char devname[32];
|
|
|
|
int ret;
|
|
|
|
|
|
|
|
/* Probe only freebsd-zfs and freebsd partitions */
|
|
|
|
if (part->type != PART_FREEBSD &&
|
|
|
|
part->type != PART_FREEBSD_ZFS)
|
2016-06-16 07:45:57 +00:00
|
|
|
return (0);
|
2012-08-05 14:48:28 +00:00
|
|
|
|
|
|
|
ppa = (struct zfs_probe_args *)arg;
|
|
|
|
strncpy(devname, ppa->devname, strlen(ppa->devname) - 1);
|
2012-08-15 09:18:49 +00:00
|
|
|
devname[strlen(ppa->devname) - 1] = '\0';
|
2012-08-05 14:48:28 +00:00
|
|
|
sprintf(devname, "%s%s:", devname, partname);
|
|
|
|
pa.fd = open(devname, O_RDONLY);
|
|
|
|
if (pa.fd == -1)
|
2016-06-16 07:45:57 +00:00
|
|
|
return (0);
|
2012-08-05 14:48:28 +00:00
|
|
|
ret = zfs_probe(pa.fd, ppa->pool_guid);
|
|
|
|
if (ret == 0)
|
2016-06-16 07:45:57 +00:00
|
|
|
return (0);
|
2012-08-05 14:48:28 +00:00
|
|
|
/* Do we have BSD label here? */
|
|
|
|
if (part->type == PART_FREEBSD) {
|
|
|
|
pa.devname = devname;
|
|
|
|
pa.pool_guid = ppa->pool_guid;
|
|
|
|
pa.secsz = ppa->secsz;
|
|
|
|
table = ptable_open(&pa, part->end - part->start + 1,
|
|
|
|
ppa->secsz, zfs_diskread);
|
|
|
|
if (table != NULL) {
|
2016-06-16 07:45:57 +00:00
|
|
|
ptable_iterate(table, &pa, zfs_probe_partition);
|
2012-08-05 14:48:28 +00:00
|
|
|
ptable_close(table);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
close(pa.fd);
|
2016-06-16 07:45:57 +00:00
|
|
|
return (0);
|
2012-08-05 14:48:28 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
zfs_probe_dev(const char *devname, uint64_t *pool_guid)
|
|
|
|
{
|
|
|
|
struct ptable *table;
|
|
|
|
struct zfs_probe_args pa;
|
2017-02-06 08:26:45 +00:00
|
|
|
uint64_t mediasz;
|
2012-08-05 14:48:28 +00:00
|
|
|
int ret;
|
|
|
|
|
2017-02-06 09:18:47 +00:00
|
|
|
if (pool_guid)
|
|
|
|
*pool_guid = 0;
|
2012-08-05 14:48:28 +00:00
|
|
|
pa.fd = open(devname, O_RDONLY);
|
|
|
|
if (pa.fd == -1)
|
|
|
|
return (ENXIO);
|
|
|
|
/* Probe the whole disk */
|
|
|
|
ret = zfs_probe(pa.fd, pool_guid);
|
|
|
|
if (ret == 0)
|
|
|
|
return (0);
|
2017-02-06 09:18:47 +00:00
|
|
|
|
2012-08-05 14:48:28 +00:00
|
|
|
/* Probe each partition */
|
|
|
|
ret = ioctl(pa.fd, DIOCGMEDIASIZE, &mediasz);
|
|
|
|
if (ret == 0)
|
|
|
|
ret = ioctl(pa.fd, DIOCGSECTORSIZE, &pa.secsz);
|
|
|
|
if (ret == 0) {
|
|
|
|
pa.devname = devname;
|
|
|
|
pa.pool_guid = pool_guid;
|
|
|
|
table = ptable_open(&pa, mediasz / pa.secsz, pa.secsz,
|
|
|
|
zfs_diskread);
|
|
|
|
if (table != NULL) {
|
|
|
|
ptable_iterate(table, &pa, zfs_probe_partition);
|
|
|
|
ptable_close(table);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
close(pa.fd);
|
2017-02-06 09:18:47 +00:00
|
|
|
if (pool_guid && *pool_guid == 0)
|
|
|
|
ret = ENXIO;
|
2016-01-06 20:25:41 +00:00
|
|
|
return (ret);
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Print information about ZFS pools
|
|
|
|
*/
|
2016-11-08 06:50:18 +00:00
|
|
|
static int
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
zfs_dev_print(int verbose)
|
|
|
|
{
|
|
|
|
spa_t *spa;
|
|
|
|
char line[80];
|
2016-11-08 06:50:18 +00:00
|
|
|
int ret = 0;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
|
2016-11-19 08:54:21 +00:00
|
|
|
if (STAILQ_EMPTY(&zfs_pools))
|
|
|
|
return (0);
|
|
|
|
|
|
|
|
printf("%s devices:", zfs_dev.dv_name);
|
|
|
|
if ((ret = pager_output("\n")) != 0)
|
|
|
|
return (ret);
|
|
|
|
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
if (verbose) {
|
2016-11-08 06:50:18 +00:00
|
|
|
return (spa_all_status());
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
}
|
|
|
|
STAILQ_FOREACH(spa, &zfs_pools, spa_link) {
|
2016-11-08 06:50:18 +00:00
|
|
|
snprintf(line, sizeof(line), " zfs:%s\n", spa->spa_name);
|
|
|
|
ret = pager_output(line);
|
|
|
|
if (ret != 0)
|
|
|
|
break;
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
}
|
2016-11-08 06:50:18 +00:00
|
|
|
return (ret);
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
}
|
|
|
|
|
|
|
|
/*
|
|
|
|
* Attempt to open the pool described by (dev) for use by (f).
|
|
|
|
*/
|
2012-05-12 09:03:30 +00:00
|
|
|
static int
|
2012-05-12 20:27:33 +00:00
|
|
|
zfs_dev_open(struct open_file *f, ...)
|
2012-05-12 09:03:30 +00:00
|
|
|
{
|
2012-05-12 20:27:33 +00:00
|
|
|
va_list args;
|
|
|
|
struct zfs_devdesc *dev;
|
2012-05-12 09:03:30 +00:00
|
|
|
struct zfsmount *mount;
|
2012-05-12 20:27:33 +00:00
|
|
|
spa_t *spa;
|
2012-05-12 09:03:30 +00:00
|
|
|
int rv;
|
|
|
|
|
2012-05-12 20:27:33 +00:00
|
|
|
va_start(args, f);
|
|
|
|
dev = va_arg(args, struct zfs_devdesc *);
|
|
|
|
va_end(args);
|
|
|
|
|
2012-10-06 19:25:40 +00:00
|
|
|
if (dev->pool_guid == 0)
|
|
|
|
spa = STAILQ_FIRST(&zfs_pools);
|
|
|
|
else
|
|
|
|
spa = spa_find_by_guid(dev->pool_guid);
|
2012-05-12 20:27:33 +00:00
|
|
|
if (!spa)
|
|
|
|
return (ENXIO);
|
2012-05-12 09:03:30 +00:00
|
|
|
mount = malloc(sizeof(*mount));
|
2012-05-12 20:27:33 +00:00
|
|
|
rv = zfs_mount(spa, dev->root_guid, mount);
|
2012-05-12 09:03:30 +00:00
|
|
|
if (rv != 0) {
|
|
|
|
free(mount);
|
|
|
|
return (rv);
|
|
|
|
}
|
|
|
|
if (mount->objset.os_type != DMU_OST_ZFS) {
|
2012-05-12 20:23:30 +00:00
|
|
|
printf("Unexpected object set type %ju\n",
|
|
|
|
(uintmax_t)mount->objset.os_type);
|
2012-05-12 09:03:30 +00:00
|
|
|
free(mount);
|
|
|
|
return (EIO);
|
|
|
|
}
|
|
|
|
f->f_devdata = mount;
|
2008-12-11 16:48:35 +00:00
|
|
|
free(dev);
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
2012-10-06 19:41:11 +00:00
|
|
|
static int
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
zfs_dev_close(struct open_file *f)
|
|
|
|
{
|
|
|
|
|
2012-05-12 09:03:30 +00:00
|
|
|
free(f->f_devdata);
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
f->f_devdata = NULL;
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
2012-10-06 19:41:11 +00:00
|
|
|
static int
|
2016-12-30 19:06:29 +00:00
|
|
|
zfs_dev_strategy(void *devdata, int rw, daddr_t dblk, size_t size, char *buf, size_t *rsize)
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
{
|
|
|
|
|
|
|
|
return (ENOSYS);
|
|
|
|
}
|
|
|
|
|
|
|
|
struct devsw zfs_dev = {
|
2012-05-12 09:03:30 +00:00
|
|
|
.dv_name = "zfs",
|
|
|
|
.dv_type = DEVT_ZFS,
|
|
|
|
.dv_init = zfs_dev_init,
|
|
|
|
.dv_strategy = zfs_dev_strategy,
|
|
|
|
.dv_open = zfs_dev_open,
|
|
|
|
.dv_close = zfs_dev_close,
|
Update ZFS from version 6 to 13 and bring some FreeBSD-specific changes.
This bring huge amount of changes, I'll enumerate only user-visible changes:
- Delegated Administration
Allows regular users to perform ZFS operations, like file system
creation, snapshot creation, etc.
- L2ARC
Level 2 cache for ZFS - allows to use additional disks for cache.
Huge performance improvements mostly for random read of mostly
static content.
- slog
Allow to use additional disks for ZFS Intent Log to speed up
operations like fsync(2).
- vfs.zfs.super_owner
Allows regular users to perform privileged operations on files stored
on ZFS file systems owned by him. Very careful with this one.
- chflags(2)
Not all the flags are supported. This still needs work.
- ZFSBoot
Support to boot off of ZFS pool. Not finished, AFAIK.
Submitted by: dfr
- Snapshot properties
- New failure modes
Before if write requested failed, system paniced. Now one
can select from one of three failure modes:
- panic - panic on write error
- wait - wait for disk to reappear
- continue - serve read requests if possible, block write requests
- Refquota, refreservation properties
Just quota and reservation properties, but don't count space consumed
by children file systems, clones and snapshots.
- Sparse volumes
ZVOLs that don't reserve space in the pool.
- External attributes
Compatible with extattr(2).
- NFSv4-ACLs
Not sure about the status, might not be complete yet.
Submitted by: trasz
- Creation-time properties
- Regression tests for zpool(8) command.
Obtained from: OpenSolaris
2008-11-17 20:49:29 +00:00
|
|
|
.dv_ioctl = noioctl,
|
|
|
|
.dv_print = zfs_dev_print,
|
|
|
|
.dv_cleanup = NULL
|
|
|
|
};
|
2012-05-12 09:03:30 +00:00
|
|
|
|
|
|
|
int
|
|
|
|
zfs_parsedev(struct zfs_devdesc *dev, const char *devspec, const char **path)
|
|
|
|
{
|
|
|
|
static char rootname[ZFS_MAXNAMELEN];
|
|
|
|
static char poolname[ZFS_MAXNAMELEN];
|
|
|
|
spa_t *spa;
|
|
|
|
const char *end;
|
|
|
|
const char *np;
|
|
|
|
const char *sep;
|
|
|
|
int rv;
|
|
|
|
|
|
|
|
np = devspec;
|
|
|
|
if (*np != ':')
|
|
|
|
return (EINVAL);
|
|
|
|
np++;
|
|
|
|
end = strchr(np, ':');
|
|
|
|
if (end == NULL)
|
|
|
|
return (EINVAL);
|
|
|
|
sep = strchr(np, '/');
|
|
|
|
if (sep == NULL || sep >= end)
|
|
|
|
sep = end;
|
|
|
|
memcpy(poolname, np, sep - np);
|
|
|
|
poolname[sep - np] = '\0';
|
|
|
|
if (sep < end) {
|
|
|
|
sep++;
|
|
|
|
memcpy(rootname, sep, end - sep);
|
|
|
|
rootname[end - sep] = '\0';
|
|
|
|
}
|
|
|
|
else
|
|
|
|
rootname[0] = '\0';
|
|
|
|
|
|
|
|
spa = spa_find_by_name(poolname);
|
|
|
|
if (!spa)
|
|
|
|
return (ENXIO);
|
|
|
|
dev->pool_guid = spa->spa_guid;
|
2012-10-06 19:42:50 +00:00
|
|
|
rv = zfs_lookup_dataset(spa, rootname, &dev->root_guid);
|
|
|
|
if (rv != 0)
|
|
|
|
return (rv);
|
2012-05-12 09:03:30 +00:00
|
|
|
if (path != NULL)
|
|
|
|
*path = (*end == '\0') ? end : end + 1;
|
|
|
|
dev->d_dev = &zfs_dev;
|
|
|
|
dev->d_type = zfs_dev.dv_type;
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
char *
|
|
|
|
zfs_fmtdev(void *vdev)
|
|
|
|
{
|
|
|
|
static char rootname[ZFS_MAXNAMELEN];
|
|
|
|
static char buf[2 * ZFS_MAXNAMELEN + 8];
|
|
|
|
struct zfs_devdesc *dev = (struct zfs_devdesc *)vdev;
|
|
|
|
spa_t *spa;
|
|
|
|
|
|
|
|
buf[0] = '\0';
|
|
|
|
if (dev->d_type != DEVT_ZFS)
|
|
|
|
return (buf);
|
|
|
|
|
2012-10-06 19:42:50 +00:00
|
|
|
if (dev->pool_guid == 0) {
|
2012-10-06 19:25:40 +00:00
|
|
|
spa = STAILQ_FIRST(&zfs_pools);
|
2012-10-06 19:42:50 +00:00
|
|
|
dev->pool_guid = spa->spa_guid;
|
|
|
|
} else
|
2012-10-06 19:25:40 +00:00
|
|
|
spa = spa_find_by_guid(dev->pool_guid);
|
2012-05-12 09:03:30 +00:00
|
|
|
if (spa == NULL) {
|
|
|
|
printf("ZFS: can't find pool by guid\n");
|
|
|
|
return (buf);
|
|
|
|
}
|
|
|
|
if (dev->root_guid == 0 && zfs_get_root(spa, &dev->root_guid)) {
|
|
|
|
printf("ZFS: can't find root filesystem\n");
|
|
|
|
return (buf);
|
|
|
|
}
|
|
|
|
if (zfs_rlookup(spa, dev->root_guid, rootname)) {
|
|
|
|
printf("ZFS: can't find filesystem by guid\n");
|
|
|
|
return (buf);
|
|
|
|
}
|
|
|
|
|
|
|
|
if (rootname[0] == '\0')
|
|
|
|
sprintf(buf, "%s:%s:", dev->d_dev->dv_name, spa->spa_name);
|
|
|
|
else
|
|
|
|
sprintf(buf, "%s:%s/%s:", dev->d_dev->dv_name, spa->spa_name,
|
|
|
|
rootname);
|
|
|
|
return (buf);
|
|
|
|
}
|
2012-10-06 19:27:04 +00:00
|
|
|
|
|
|
|
int
|
|
|
|
zfs_list(const char *name)
|
|
|
|
{
|
|
|
|
static char poolname[ZFS_MAXNAMELEN];
|
|
|
|
uint64_t objid;
|
|
|
|
spa_t *spa;
|
|
|
|
const char *dsname;
|
|
|
|
int len;
|
|
|
|
int rv;
|
|
|
|
|
|
|
|
len = strlen(name);
|
|
|
|
dsname = strchr(name, '/');
|
|
|
|
if (dsname != NULL) {
|
|
|
|
len = dsname - name;
|
|
|
|
dsname++;
|
2012-10-06 19:42:50 +00:00
|
|
|
} else
|
|
|
|
dsname = "";
|
2012-10-06 19:27:04 +00:00
|
|
|
memcpy(poolname, name, len);
|
|
|
|
poolname[len] = '\0';
|
|
|
|
|
|
|
|
spa = spa_find_by_name(poolname);
|
|
|
|
if (!spa)
|
|
|
|
return (ENXIO);
|
2012-10-06 19:42:50 +00:00
|
|
|
rv = zfs_lookup_dataset(spa, dsname, &objid);
|
2012-10-06 19:27:04 +00:00
|
|
|
if (rv != 0)
|
|
|
|
return (rv);
|
2015-12-31 20:00:53 +00:00
|
|
|
|
|
|
|
return (zfs_list_dataset(spa, objid));
|
|
|
|
}
|
|
|
|
|
2016-01-15 05:45:10 +00:00
|
|
|
void
|
|
|
|
init_zfs_bootenv(char *currdev)
|
|
|
|
{
|
|
|
|
char *beroot;
|
|
|
|
|
|
|
|
if (strlen(currdev) == 0)
|
|
|
|
return;
|
|
|
|
if(strncmp(currdev, "zfs:", 4) != 0)
|
|
|
|
return;
|
|
|
|
/* Remove the trailing : */
|
|
|
|
currdev[strlen(currdev) - 1] = '\0';
|
|
|
|
setenv("zfs_be_active", currdev, 1);
|
|
|
|
setenv("zfs_be_currpage", "1", 1);
|
|
|
|
/* Forward past zfs: */
|
|
|
|
currdev = strchr(currdev, ':');
|
|
|
|
currdev++;
|
|
|
|
/* Remove the last element (current bootenv) */
|
|
|
|
beroot = strrchr(currdev, '/');
|
|
|
|
if (beroot != NULL)
|
|
|
|
beroot[0] = '\0';
|
|
|
|
beroot = currdev;
|
|
|
|
setenv("zfs_be_root", beroot, 1);
|
|
|
|
}
|
|
|
|
|
2015-12-31 20:00:53 +00:00
|
|
|
int
|
|
|
|
zfs_bootenv(const char *name)
|
|
|
|
{
|
2016-01-09 00:54:08 +00:00
|
|
|
static char poolname[ZFS_MAXNAMELEN], *dsname, *root;
|
2015-12-31 20:00:53 +00:00
|
|
|
char becount[4];
|
|
|
|
uint64_t objid;
|
|
|
|
spa_t *spa;
|
|
|
|
int len, rv, pages, perpage, currpage;
|
|
|
|
|
2016-01-09 00:54:08 +00:00
|
|
|
if (name == NULL)
|
|
|
|
return (EINVAL);
|
|
|
|
if ((root = getenv("zfs_be_root")) == NULL)
|
|
|
|
return (EINVAL);
|
|
|
|
|
|
|
|
if (strcmp(name, root) != 0) {
|
2015-12-31 20:00:53 +00:00
|
|
|
if (setenv("zfs_be_root", name, 1) != 0)
|
|
|
|
return (ENOMEM);
|
|
|
|
}
|
|
|
|
|
|
|
|
SLIST_INIT(&zfs_be_head);
|
|
|
|
zfs_env_count = 0;
|
|
|
|
len = strlen(name);
|
|
|
|
dsname = strchr(name, '/');
|
|
|
|
if (dsname != NULL) {
|
|
|
|
len = dsname - name;
|
|
|
|
dsname++;
|
|
|
|
} else
|
|
|
|
dsname = "";
|
|
|
|
memcpy(poolname, name, len);
|
|
|
|
poolname[len] = '\0';
|
|
|
|
|
|
|
|
spa = spa_find_by_name(poolname);
|
|
|
|
if (!spa)
|
|
|
|
return (ENXIO);
|
|
|
|
rv = zfs_lookup_dataset(spa, dsname, &objid);
|
|
|
|
if (rv != 0)
|
|
|
|
return (rv);
|
|
|
|
rv = zfs_callback_dataset(spa, objid, zfs_belist_add);
|
|
|
|
|
|
|
|
/* Calculate and store the number of pages of BEs */
|
|
|
|
perpage = (ZFS_BE_LAST - ZFS_BE_FIRST + 1);
|
|
|
|
pages = (zfs_env_count / perpage) + ((zfs_env_count % perpage) > 0 ? 1 : 0);
|
|
|
|
snprintf(becount, 4, "%d", pages);
|
|
|
|
if (setenv("zfs_be_pages", becount, 1) != 0)
|
|
|
|
return (ENOMEM);
|
|
|
|
|
|
|
|
/* Roll over the page counter if it has exceeded the maximum */
|
|
|
|
currpage = strtol(getenv("zfs_be_currpage"), NULL, 10);
|
|
|
|
if (currpage > pages) {
|
|
|
|
if (setenv("zfs_be_currpage", "1", 1) != 0)
|
|
|
|
return (ENOMEM);
|
|
|
|
}
|
|
|
|
|
|
|
|
/* Populate the menu environment variables */
|
|
|
|
zfs_set_env();
|
|
|
|
|
|
|
|
/* Clean up the SLIST of ZFS BEs */
|
|
|
|
while (!SLIST_EMPTY(&zfs_be_head)) {
|
|
|
|
zfs_be = SLIST_FIRST(&zfs_be_head);
|
|
|
|
SLIST_REMOVE_HEAD(&zfs_be_head, entries);
|
|
|
|
free(zfs_be);
|
|
|
|
}
|
|
|
|
|
2012-10-06 19:42:50 +00:00
|
|
|
return (rv);
|
2012-10-06 19:27:04 +00:00
|
|
|
}
|
2015-12-31 20:00:53 +00:00
|
|
|
|
|
|
|
int
|
2016-08-01 19:37:43 +00:00
|
|
|
zfs_belist_add(const char *name, uint64_t value __unused)
|
2015-12-31 20:00:53 +00:00
|
|
|
{
|
|
|
|
|
2016-01-15 05:45:10 +00:00
|
|
|
/* Skip special datasets that start with a $ character */
|
|
|
|
if (strncmp(name, "$", 1) == 0) {
|
|
|
|
return (0);
|
|
|
|
}
|
2015-12-31 20:00:53 +00:00
|
|
|
/* Add the boot environment to the head of the SLIST */
|
|
|
|
zfs_be = malloc(sizeof(struct zfs_be_entry));
|
2016-01-15 05:45:10 +00:00
|
|
|
if (zfs_be == NULL) {
|
|
|
|
return (ENOMEM);
|
|
|
|
}
|
2015-12-31 20:00:53 +00:00
|
|
|
zfs_be->name = name;
|
|
|
|
SLIST_INSERT_HEAD(&zfs_be_head, zfs_be, entries);
|
|
|
|
zfs_env_count++;
|
|
|
|
|
|
|
|
return (0);
|
|
|
|
}
|
|
|
|
|
|
|
|
int
|
|
|
|
zfs_set_env(void)
|
|
|
|
{
|
|
|
|
char envname[32], envval[256];
|
|
|
|
char *beroot, *pagenum;
|
|
|
|
int rv, page, ctr;
|
|
|
|
|
|
|
|
beroot = getenv("zfs_be_root");
|
|
|
|
if (beroot == NULL) {
|
|
|
|
return (1);
|
|
|
|
}
|
|
|
|
|
|
|
|
pagenum = getenv("zfs_be_currpage");
|
|
|
|
if (pagenum != NULL) {
|
|
|
|
page = strtol(pagenum, NULL, 10);
|
|
|
|
} else {
|
|
|
|
page = 1;
|
|
|
|
}
|
|
|
|
|
|
|
|
ctr = 1;
|
|
|
|
rv = 0;
|
|
|
|
zfs_env_index = ZFS_BE_FIRST;
|
|
|
|
SLIST_FOREACH_SAFE(zfs_be, &zfs_be_head, entries, zfs_be_tmp) {
|
|
|
|
/* Skip to the requested page number */
|
|
|
|
if (ctr <= ((ZFS_BE_LAST - ZFS_BE_FIRST + 1) * (page - 1))) {
|
|
|
|
ctr++;
|
|
|
|
continue;
|
|
|
|
}
|
|
|
|
|
|
|
|
snprintf(envname, sizeof(envname), "bootenvmenu_caption[%d]", zfs_env_index);
|
|
|
|
snprintf(envval, sizeof(envval), "%s", zfs_be->name);
|
|
|
|
rv = setenv(envname, envval, 1);
|
|
|
|
if (rv != 0) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
snprintf(envname, sizeof(envname), "bootenvansi_caption[%d]", zfs_env_index);
|
|
|
|
rv = setenv(envname, envval, 1);
|
|
|
|
if (rv != 0){
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
snprintf(envname, sizeof(envname), "bootenvmenu_command[%d]", zfs_env_index);
|
|
|
|
rv = setenv(envname, "set_bootenv", 1);
|
|
|
|
if (rv != 0){
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
snprintf(envname, sizeof(envname), "bootenv_root[%d]", zfs_env_index);
|
|
|
|
snprintf(envval, sizeof(envval), "zfs:%s/%s", beroot, zfs_be->name);
|
|
|
|
rv = setenv(envname, envval, 1);
|
|
|
|
if (rv != 0){
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
zfs_env_index++;
|
|
|
|
if (zfs_env_index > ZFS_BE_LAST) {
|
|
|
|
break;
|
|
|
|
}
|
|
|
|
|
|
|
|
}
|
|
|
|
|
|
|
|
for (; zfs_env_index <= ZFS_BE_LAST; zfs_env_index++) {
|
|
|
|
snprintf(envname, sizeof(envname), "bootenvmenu_caption[%d]", zfs_env_index);
|
|
|
|
(void)unsetenv(envname);
|
|
|
|
snprintf(envname, sizeof(envname), "bootenvansi_caption[%d]", zfs_env_index);
|
|
|
|
(void)unsetenv(envname);
|
|
|
|
snprintf(envname, sizeof(envname), "bootenvmenu_command[%d]", zfs_env_index);
|
|
|
|
(void)unsetenv(envname);
|
|
|
|
snprintf(envname, sizeof(envname), "bootenv_root[%d]", zfs_env_index);
|
|
|
|
(void)unsetenv(envname);
|
|
|
|
}
|
|
|
|
|
|
|
|
return (rv);
|
2016-05-18 05:59:05 +00:00
|
|
|
}
|