Initial support for FreeBSD specific routines related to counting
online processors and dynamic load balancing.
Fix "detection" of the <sys/sysctl> header which upstream seems to have
done wrong.
Obtained from: GCC pre-4.4 branch (rev. 140497; LGPLv2.1+)
This is not likely to make it into a release and is basically disabled
but should still be useful for testing.
Obtained from: GCC pre-4.3 (rev. 123494, 125542; LGPLv2.1+)
ELF toolchain readelf lacked some functionality at the time other tools
(like size, strip, nm, etc.) were switched over to the ELF toolchain
versions. That has been addressed as of the last update, so we can add
it to the list.
PR: 198950 [exp-run]
Reviewed by: bapt, imp, rpaulo
Relnotes: yes
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D2156
Some users build FreeBSD as non-root in Perforce workspaces. By default,
Perforce sets files read-only unless they're explicitly being edited.
As a result, the -f argument must be used to cp in order to override the
read-only flag when copying source files to object directories. Bare use of
'cp' should be avoided in the future.
Update all current users of 'cp' in the src tree.
Reviewed by: emaste
MFC after: 1 week
Sponsored by: Spectra Logic
To be able to info pages consider installing texinfo from ports print/texinfo or
via pkg: pkg install texinfo
Differential Revision: https://reviews.freebsd.org/D1409
Reviewed by: emaste, imp (previous version)
Relnotes: yes
- Eliminate unused irqframe
- Eliminate unused saframe
- Instead of splitting r4-sp storage between the stack and switchframe,
just put all the registers in switchframe and eliminate the un_32 struct.
Submitted by: Svatopluk Kraus <onwahe@gmail.com>,
Michal Meloun <meloun@miracle.cz>
Recent binutils considered the .gnu.warning.symbol section as a fatal error when
run with --fatal-warnings which makes any users of "insecure" functions from
libc failing to build with recent binutils.
Introduce a new macro: LD_FATAL_WARNINGS=no to run ld(1) with
--no-fatal-warnings for the users of "insecure" functions
Differential Revision: https://reviews.freebsd.org/D1320
This speeds up building the directory from the bootstrap-tools stage in
buildworld as well as building from the subdirectory
Based on a patch submitted via -arch:
https://lists.freebsd.org/pipermail/freebsd-arch/2014-December/016493.html
MFC after: 1 week
Submitted by: Jia-Shiun Li <jiashiun@gmail.com>
Sponsored by: EMC / Isilon Storage Division
Prior to this change the build could fail as follows, if gperf is not
available (or fails):
- make(1) stops due to the gperf error, but an empty target file
(cfns.h) is still created
- the empty cfns.h is newer than the source cfns.gperf so it is not
regenerated on subsequent builds
- the gcc build fails (undefined reference to libc_name_p)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Summary:
LLVM/Clang generates relocations that our binutils doesn't understand, but newer
binutils does. I got permission from the author of a series of patches to
relicense them as GPLv2 for use in FreeBSD. The upstream git hashes are:
ac2df442ac7901f00af15b272fc48b594b433713
2b95367962dc14f69d3c338c4d54195266e2e169
102890f04c44b64cf5cef4588267dd9f24086ac7
b7fcf6f6bb53b5027e111107f5416769cb9a5798
1d483afedd5a628dc84fb58d1d570f79fdfbfa7b
90aecf7a80c1cefeb45fc10a6cd02c8338e34b4c
3a71aa26df2a372a58e9c11ef9ba51fd0e83320a
727fc41e077139570ea8b8ddfd6c546b2a55627c
With the import of clang 3.5, and a few backported patches, we should be able to
move powerpc and powerpc64 to clang-as-cc soon.
Test Plan: Passes make tinderbox, so no regressions. Binaries built with clang
run on powerpc64.
Reviewers: #committers, dim
Reviewed By: dim
Differential Revision: https://reviews.freebsd.org/D1297
Obtained from: Alan Modra, upstream binutils-gdb git
MFC after: 3 weeks
Relnotes: yes
Set WITH_ELFTOOLCHAIN_TOOLS in src.conf to use the elftoolchain version
of the following tools:
* addr2line
* elfcopy (strip / mcs)
* nm
* size
* strings
Reviewed by: bapt (earlier version)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D1224
comparing it with NOCPU, which became -1 recently. While here, avoid
using it for address calculations if it is negative.
Reviewed by: jhb, adrian
MFC after: 1 week
gperf is used as a build tool for g++ and is not needed for Clang
architectures. Ports and third-party software that need it can use the
up-to-date devel/gperf port.
PR: 194103 (exp-run)
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D886
the oabi is still in the tree, but it is expected this will be removed
as developers work on surrounding code.
With this commit the ARM EABI is the only supported supported ABI by
FreeBSD on ARMa 32-bit processors.
X-MFC after: never
Relnotes: yes
Differential Revision: https://reviews.freebsd.org/D876
1. 50+% of NO_PIE use is fixed by adding -fPIC to INTERNALLIB and other
build-only utility libraries.
2. Another 40% is fixed by generating _pic.a variants of various libraries.
3. Some of the NO_PIE use is a bit absurd as it is disabling PIE (and ASLR)
where it never would work anyhow, such as csu or loader. This suggests
there may be better ways of adding support to the tree. Many of these
cases can be fixed such that -fPIE will work but there is really no
reason to have it in those cases.
4. Some of the uses are working around hacks done to some Makefiles that are
really building libraries but have been using bsd.prog.mk because the code
is cleaner. Had they been using bsd.lib.mk then NO_PIE would not have
been needed.
We likely do want to enable PIE by default (opt-out) for non-tree consumers
(such as ports). For in-tree though we probably want to only enable PIE
(opt-in) for common attack targets such as remote service daemons and setuid
utilities. This is also a great performance compromise since ASLR is expected
to reduce performance. As such it does not make sense to enable it in all
utilities such as ls(1) that have little benefit to having it enabled.
Reported by: kib
Make sure everything linking to a privatelib and/or an internallib does it directly
from the OBJDIR rather than DESTDIR.
Add src.libnames.mk so bsd.libnames.mk is not polluted by libraries not existsing
in final installation
Introduce the LD* variable which is what ld(1) is expecting (via LDADD) to link to
internal/privatelib
Directly link to the .so in case of private library to avoid having to complexify
LDFLAGS.
Phabric: https://phabric.freebsd.org/D553
Reviewed by: imp, emaste
variants. This allows usable file system images (i.e. those with both a
shell and an editor) to be created with only one copy of the curses library.
Exp-run: antoine
PR: 189842
Discussed with: bapt
Sponsored by: DARPA, AFRL
nothing more. Force it to be "no" when MK_CXX is "no" to simplify
usage. It no longer also means "build g++" since we no longer have a
platform where that's interesting now that pc98 no longer needs clang
and gcc, but not g++. pc98 now just uses clang after boot2 changes.
statically linked into consumers (GDB and variants) in the base
system, and the shared library is no longer installed.
That also allows ports to be able to use a modern version of readline
PR: 162948
Reviewed by: emaste
This includes:
o All directories named *ia64*
o All files named *ia64*
o All ia64-specific code guarded by __ia64__
o All ia64-specific makefile logic
o Mention of ia64 in comments and documentation
This excludes:
o Everything under contrib/
o Everything under crypto/
o sys/xen/interface
o sys/sys/elf_common.h
Discussed at: BSDcan
(/usr/src) tree rather than the OBJDIR (/usr/obj) tree. This fixes
broken incremental builds with the canonical MAKESYSPATH workaround
of .../share/mk. This is a gross kludge.
This is currently an opt-in build flag. Once ASLR support is ready and stable
it should changed to opt-out and be enabled by default along with ASLR.
Each application Makefile uses opt-out to ensure that ASLR will be enabled by
default in new directories when the system is compiled with PIE/ASLR. [2]
Mark known build failures as NO_PIE for now.
The only known runtime failure was rtld.
[1] http://www.bsdcan.org/2014/schedule/events/452.en.html
Submitted by: Shawn Webb <lattera@gmail.com>
Discussed between: des@ and Shawn Webb [2]
This change adds tests/ directories in the source tree to create various
subdirectories in /usr/tests/ and to install placeholder Kyuafiles for
them.
the relevant hierarchies are: cddl, etc, games, gnu and secure.
The reason for this is to simplify the addition of new test programs for
utilities or libraries under any of these directories. Doing so on a
case by case basis is unnecessary and is quite an obscure process.
and finish the job. ncurses is now the only Makefile in the tree that
uses it since it wasn't a simple mechanical change, and will be
addressed in a future commit.
all timestamps in static libraries to 0 so that consecutive builds
from the same source, even on different machines, produce identical
libraries.
MFC after: 3 weeks
This targets the existing ARMv6 and ARMv7 SoCs that contain a VFP unit.
This is an optional coprocessors may not be present in all devices, however
it appears to be in all current SoCs we support.
armv6hf targets the VFP variant of the ARM EABI and our copy of gcc is too
old to support this. Because of this there are a number of WITH/WITHOUT
options that are unsupported and must be left as the default value. The
options and their required value are:
* WITH_ARM_EABI
* WITHOUT_GCC
* WITHOUT_GNUCXX
In addition, without an external toolchain, the following need to be left
as their default:
* WITH_CLANG
* WITH_CLANG_IS_CC
As there is a different method of passing float and double values to
functions the ABI is incompatible with existing armv6 binaries. To use
this a full rebuild of world is required. Because no floating point values
are passed into the kernel an armv6 kernel with VFP enabled will work with
an armv6hf userland and vice versa.
IPX was a network transport protocol in Novell's NetWare network operating
system from late 80s and then 90s. The NetWare itself switched to TCP/IP
as default transport in 1998. Later, in this century the Novell Open
Enterprise Server became successor of Novell NetWare. The last release
that claimed to still support IPX was OES 2 in 2007. Routing equipment
vendors (e.g. Cisco) discontinued support for IPX in 2011.
Thus, IPX won't be supported in FreeBSD 11.0-RELEASE.
commit c1acf022c533c5ae27e0cd556977eafe3f5959eb
Author: Brooks Davis <brooks@one-eyed-alien.net>
Date: Fri Jan 17 21:46:44 2014 +0000
Add an option WITHOUT_NCURSESW to suppress building and linking to
libncursesw. While wide character support it useful we'd like to
only need one ncurses library on embedded systems.
MFC after: 4 weeks
Sponsored by: DARPA, AFRL
libgcc, but this was not propagated to this file. Revision 260844 added
them here for ia64 unbeknownst revision 258428. Fix it for all...
Pointed out by: pfg
standard core target by declaring coreops_suppress_target with
initializer. This is also happening for non-cross kgdb, by
virtue of having fbsd-threads.c in libgdb and having it do the
exact same thing. Since fbsd-threads.c is not included in in
libgdb when building a cross debugger, we ended up with more
than 1 core file targets (the standard gdb core file target and
kgdb's libkvm based core file target) and this behaves the same
as not having a core target at all.
clang-specific or gcc-specific flags, introduce the following new
variables for use in Makefiles:
CFLAGS.clang
CFLAGS.gcc
CXXFLAGS.clang
CXXFLAGS.gcc
In bsd.sys.mk, these get appended to the regular CFLAGS or CXXFLAGS for
the right compiler.
MFC after: 1 week
a static variable. This code has been moved around in gcc, but is still in
use in the latest trunk version of the compiler.
gnu/lib/libgcc/../../../contrib/gcc/unwind-dw2.c:208:36:
warning: static variable 'dwarf_reg_size_table' is used in an inline
function with external linkage [-Wstatic-in-inline]
gcc_assert (index < (int) sizeof(dwarf_reg_size_table));
implementation. This fixes the toolchain and kernel-toolchain targets
when building from older FreeBSD versions where make is fmake.
Reported by: luigi
Sponsored by: DARPA/AFRL
MFC after: 3 days
- Update FreeBSD version in:
- UPDATING
- sys/conf/newvers.sh
- Add 11.0 FreeBSD version for manual pages
- Bump __FreeBSD_version to 1100000
Approved by: re (implicit)
Sponsored by: The FreeBSD Foundation
r256095:
- Add gnu/usr.bin/rcs back to the base system.
r256120:
- Add WITHOUT_RCS back to src.conf.5.
r256121:
- Remove UPDATING entry regarding gnu/usr.bin/rcs removal.
Requested by: many
Approved by: re (marius)
Discussed with: core
The libarchive-based replacements have been used since 2009; the GNU
ones were kept to support source upgrades from FreeBSD 6.
Approved by: re@ (delphij)
errors when you enable WITH_GNUCXX to build libstdc++, since it will
include C++ headers from the libc++ installation under ${WORLDTMP}, and
those are not compatible with libstdc++ at all.
To fix this, add -stdlib=libstdc++ to CXXFLAGS when building libstdc++
(and its companion libsupc++) with clang.
Approved by: re (delphij)
To enable them, set WITH_GCC and WITH_GNUCXX in src.conf.
Make clang default to using libc++ on FreeBSD 10.
Bumped __FreeBSD_version for the change.
GCC is still enabled on PC98, because the PC98 bootloader requires GCC to build
(or, at least, hard-codes the use of gcc into its build).
Thanks to everyone who helped make the ports tree ready for this (and bapt
for coordinating them all). Also to imp for reviewing this and working on the
forward-porting of the changes in our gcc so that we're getting to a much
better place with regard to external toolchains.
Sorry to all of the people who helped who I forgot to mention by name.
Reviewed by: bapt, imp, dim, ...
The old (2.1) GNU patch has outlived its days. The major
local changes have been moved into the less restrictedly
licensed patch(1) we adopted in usr.bin/ .
A much newer version of GNU patch is available in the
ports tree (devel/patch).
Disconnect from the build and remove.
-maes option, but not the -mpclmul option as I ran out of bits in
the 32 bit flags field... You can -D__PCLMUL__ to get this, but it
won't be compatible w/ clang and modern gcc...
Reviewed by: -current, -toolchain
As promised, drop the option to make the older GNU patch
the default.
GNU patch is still being built but something drastic may
happen to it to it before Release.
echo xxx | grep -D skip xxx
returns nothing. Instead of just removing added S_ISFIFO condition
(originally absent in this version of grep), make it work as latest
GNU version does: don't skip directories and devices if fd == STDIN_FILENO.
The BSD-licensed patch(1) command has matured and it's behaviour
can be considered equivalent to the older version of GNU patch
in the tree.
The switch has been extensively tested [1] and only two ports
presented regressions, which have since been fixed.
For convenience a new WITH_GNU_PATCH option is available,
but it will likely be removed in the near future.
PR: 176313
Approved by: portmgr
accurately fills the read buffer.
Callers of pgets() still mis-process the buffer contents if the read line
contains NUL characters, but this at least makes pgets() accurate.
The former makes a copy of stdin, but was not accurately putting the
content of stdin into a temp file. This lead to the undercounting
the number of lines in hunks containing NUL characters when reading
from stdin. Thus resulting in "unexpected end of file in patch" errors.
debug files for userland programs and libraries. The "-g" debug flag
is automatically applied when WITH_DEBUG_FILES is set.
The debug files are now named ${prog}.debug and ${shlib}.debug for
consistency with other systems and documentation. In addition they are
installed under /usr/lib/debug, to simplify the process of installing
them if needed after a crash. Users of bsd.{prog,lib}.mk outside of the
base system place the standalone debug files in a .debug subdirectory.
GDB automatically searches both of these directories for standalone
debug files.
Thanks to everyone who contributed changes, review, and testing during
development.
Change several int variables to size_t, ssize_t, or ptrdiff_t.
This should fix the bug described in CVE-2012-5667 when an input
line is so long that its length cannot be stored in an int
variable.
This is based on NetBSD's revision which says:
This change to NetBSD's version of GNU grep 2.5.1 (licenced under
GPLv2) was made without direct reference to any code licenced
under GPLv3.
Obtained from: NetBSD
MFC after: 3 days
Originally we disabled libcompiler-rt on MIPS and SPARC64, because of an
issue where __clzdi2 and __ctzdi2 would cause endless recursion. This
bug has been fixed in r230021 already, but for some reason we only
switched to libcompiler-rt on SPARC64 -- not MIPS.
This means we can finally use <stdatomic.h> on all our architectures.
When looking up the absolute path for a kld, call find_kld_path() first.
This enables locating the module in a different directory than the one
stored in kernel memory.
With this change, kgdb can now be run on a kernel & vmcore whose associated
modules are located in the same directory as the kernel. This makes
independent triaging of problems much easier.
This change also does not break the normal kgdb use case where no arguments
are specified; in that case kgdb loads the running kernel and its modules.
Reviewed by: adrian
Approved by: ken (mentor)
Sponsored by: Spectra Logic
MFC after: 1 month
the symbols in compiler-rt, including the ones not available in the old
libgcc. This fixes the build with clang which generates calls to funstions
that are missing from libgcc_s.
* document the kgdb -b flag
* better verify what's valid with -b
* add more comprehensive command line help
PR: kern/175743
Submitted by: Christoph Mallon <christoph.mallon@gmx.de>
on a core, when the core was stopped, by calling kgdb_trgt_core_pcb().
This has 2 advantages:
1. We don't need to include a machine-specific header anymore and as
such kthr.c is truly machine independent. This allows the code to
be used in a cross-debugger.
2. We don't need to lookup stoppcbs in generic code when it's an
inherently target-spicific symbol. It does not exist for ia64.
Implement kgdb_trgt_core_pcb() for all architectures, except ia64, by
calling a common function called kgdb_trgt_stop_pcb(). This function
differs from kgdb_trgt_core_pcb() in that it gets the size of the PCB
structure as an argument and as such remains machine independent.
On ia64 the PCB for stopped cores is in the PCPU structure itself.
This for better scaling. The implementation of kgdb_trgt_core_pcb()
for ia64 uses the cpuid_to_pcpu[] array to to obtain the address of
the PCB structure.
DragonflyBSD and install it as bsdpatch. WITH_BSD_PATCH makes it
default and installs GNU patch as gnupatch.
Submitted by: pfg
Obtained from: The DragonflyBSD Project
that were causing the runtime and STL libraries to see different versions of
various classes and functions when libstdc++ is used as a filter.
Note: This changes the ABI for libcxxrt, but libcxxrt is currently only in
-STABLE for testing and is not used by anything unless explicitly enabled by
the end user. No default compiler configurations use it.
libc++ will need to be recompiled after this change. make buildworld will do
this automatically, but make in lib/libc++ will not necessarily work unless the
new libcxxrt is installed first.
PR: kern/171610, stand/175453
Reviewed by: kib
MFC after: 1 week
be used on the host system (and not installed on the device, if required). The
GPL'd one is still available if there are any devices that need it (make
universe passes with it, including kernels that use fdt, but there may be some
out-of-tree ones). WITH_GPL_DTC can be used to select the old one, for now.
Probably won't be MFC'd, but we'll remove the GPL'd version in head after the
new one has had a lot more testing and ship it in 10.0.
This allows a remote session to be specified with '-r' as well as a
non-default baudrate setting using '-b'.
TODO: add to the kgdb manpage.
MFC after: 2 weeks
ARM EABI support is disabled by default and can be enabled by setting
WITH_ARM_EABI when building, however only the kernel-toolchain target will
work with this flag until the rest of the support is added.
break mixed form dialogs in conjunction with the FreeBSD termcap, making
the bsdinstall partition editor Add dialog, among other things, completely
nonfunctional. This restores dialog 20110707.
* Don't provide clear_cache or the __sync_* functions on ARM with clang as
they are provided by clang as builtin functions.
* Tell clang it is aloud to compile some libgcc code using heinous GCC
extensions.
share/mk/sys.mk instead.
This is part of a medium term project to permit deterministic builds of
FreeBSD.
Submitted by: Erik Cederstrand <erik@cederstrand.dk>
Reviewed by: imp, toolchain@
Approved by: cperciva
MFC after: 2 weeks
-std= flags above c++98 or gnu++98 from CXXFLAGS *after* including
bsd.lib.mk, otherwise some additions to CXXFLAGS done in bsd.*.mk might
not be preserved.
MFC after: 1 week
1. Don't do upgrade_checks when using bmake. As long as we have WITH_BMAKE,
there's a bootstrap complication in ths respect. Avoid it. Make the
necessary changes to have upgrade_checks work wth bmake anyway.
2. Remove the use of -E. It's not needed in our build because we use ?= for
the respective variables, which means that we'll take the environment
value (if any) anyway.
3. Properly declare phony targets as phony as bmake is a lot smarter (and
thus agressive) about build avoidance.
4. Make sure CLEANFILES is complete and use it on .NOPATH. bmake is a lot
smarter about build avoidance and should not find files we generate in
the source tree. We should not have files in the repository we want to
generate, but this is an easier way to cross this hurdle.
5. Have behavior under bmake the same as it is under make with respect to
halting when sub-commands fail. Add "set -e" to compound commands so
that bmake is informed when sub-commands fail.
6. Make sure crunchgen uses the same make as the rest of the build. This
is important when the make utility isn't called make (but bmake for
example).
7. While here, add support for using MAKEOBJDIR to set the object tree
location. It's the second alternative bmake looks for when determining
the actual object directory (= .OBJDIR).
Submitted by: Simon Gerraty <sjg@juniper.net>
Submitted by: John Van Horne <jvanhorne@juniper.net>
option from CXXFLAGS, otherwise these libraries will not build.
Similarly, filter out any -std=xxx options that aren't supported.
Submitted by: Yamaya Takashi <yamayan@kbh.biglobe.ne.jp>
MFC after: 2 weeks
internal knowledge that "cd" is a shell's built-in. Such makes
may attempt to exec() "cd" that in turn will fail on systems that
lack the "cd" executable.
Reworked this by eliminating the root cause.
Submitted by: Simon Gerraty <sjg@juniper.net>
r238211:
Support TARGET_ARCH=armv6 and TARGET_ARCH=armv6eb
This adds a new TARGET_ARCH for building on ARM
processors that support the ARMv6K multiprocessor
extensions. In particular, these processors have
better support for TLS and mutex operations.
This mostly touches a lot of Makefiles to extend
existing patterns for inferring CPUARCH from ARCH.
It also configures:
* GCC to default to arm1176jz-s
* GCC to predefine __FreeBSD_ARCH_armv6__
* gas to default to ARM_ARCH_V6K
* uname -p to return 'armv6'
* make so that MACHINE_ARCH defaults to 'armv6'
It also changes a number of headers to use
the compiler __ARM_ARCH_XXX__ macros to configure
processor-specific support routines.
Submitted by: Tim Kientzle <kientzle@freebsd.org>
"gnusort". Most of the BSD sort development work was done by
Oleg Moskalenko <oleg.moskalenko@citrix.com>.
- GNU grep can be set to default by setting WITH_GNU_GREP. It will cause
BSD sort to be installed as "bsdsort".
Portbuild tested by: linimon
not libstdc++.
Unfortunately, it appears that libsupc++ / libstdc++ have a different idea of
the type of size_t to the rest of the world, which may cause problems later
on...
Reported by: des
MFC after: 1 week
That is, build crtbeginS.o and crtendS.o instead of crtbegin.So and
crtend.So. Remove the name substitution during install.
Obtained from: Juniper Networks, Inc.
"bsdsort" and GNU sort will be the default "sort". When WITH_BSD_SORT
is set, BSD sort will be the default "sort" and GNU sort will be installed
as "gnusort".
This makes our naming scheme more closely match other systems and the
expectations of much third-party software. MIPS builds which are little-endian
should require and exhibit no changes. Big-endian TARGET_ARCHes must be
changed:
From: To:
mipseb mips
mipsn32eb mipsn32
mips64eb mips64
An entry has been added to UPDATING and some foot-shooting protection (complete
with warnings which should become errors in the near future) to the top-level
base system Makefile.
installs clang as /usr/bin/cc, /usr/bin/c++ and /usr/bin/cpp.
Note this does *not* disable building and installing gcc, which will
still be available as /usr/bin/gcc, /usr/bin/g++ and /usr/bin/gcpp. If
you want to disable gcc completely, you must use WITHOUT_GCC.
MFC after: 2 weeks
to be gcc's default before r198344, calls to atomic builtins will not be
expanded inline. Instead, they will be generated as calls to external
functions (e.g. __sync_fetch_and_add_N), leading to linking errors later
on.
Put in a seatbelt that disables use of atomic builtins in libstdc++ and
llvm, when tuning specifically for the real i386 CPU. This does not
protect against all possible issues, but it is better than nothing.
and processes in a kernel image. This allows examination of threads that
have exited or are in the late stages of exiting.
Tested by: avg
Approved by: re (kib)
MFC after: 1 week
This also replaces the local fix in r219209 that made .Ac emit
ASCII angle quotes with an official fix. In the official fix,
ASCII quotes are output when using the .Aq, .Ao and .Ac calls,
but only when nested into the .An macro.
PR: gnu/154822
If WITH_BSD_GREP is not set, it will be 'bsdgrep' and GNUgrep will be
'[ef]grep'. Otherwise, BSD-grep will be the grep family, and GNUgrep
will be 'gnugrep'.
Discussed with: brooks
Some files keep the SUN4V tags as a code reference, for the future,
if any rewamped sun4v support wants to be added again.
Reviewed by: marius
Tested by: sbruno
Approved by: re
cpuset_t objects.
That is going to offer the underlying support for a simple bump of
MAXCPU and then support for number of cpus > 32 (as it is today).
Right now, cpumask_t is an int, 32 bits on all our supported architecture.
cpumask_t on the other side is implemented as an array of longs, and
easilly extendible by definition.
The architectures touched by this commit are the following:
- amd64
- i386
- pc98
- arm
- ia64
- XEN
while the others are still missing.
Userland is believed to be fully converted with the changes contained
here.
Some technical notes:
- This commit may be considered an ABI nop for all the architectures
different from amd64 and ia64 (and sparc64 in the future)
- per-cpu members, which are now converted to cpuset_t, needs to be
accessed avoiding migration, because the size of cpuset_t should be
considered unknown
- size of cpuset_t objects is different from kernel and userland (this is
primirally done in order to leave some more space in userland to cope
with KBI extensions). If you need to access kernel cpuset_t from the
userland please refer to example in this patch on how to do that
correctly (kgdb may be a good source, for example).
- Support for other architectures is going to be added soon
- Only MAXCPU for amd64 is bumped now
The patch has been tested by sbruno and Nicholas Esborn on opteron
4 x 12 pack CPUs. More testing on big SMP is expected to came soon.
pluknet tested the patch with his 8-ways on both amd64 and i386.
Tested by: pluknet, sbruno, gianni, Nicholas Esborn
Reviewed by: jeff, jhb, sbruno
Therefore, we also need to install the new tmmintrin.h header containing
the related intrinsic functions, similar to xmmintrin.h, emmintrin.h,
etc.
Reported by: George Liaskos <geo.liaskos@gmail.com>
This (almost) gives us the address space back (at the bottom) that we lost
at the top.
Region 0 has traditionally been reserved for IA-32 emulation, which has not
been of great interest. By starting 64-bit processes at the 4G boundary we
at least preserve some of the advantages:
1. Any invalid pointer cast (from int to pointer and back) will still
always fail and not only when more than 4GB of memory is in use.
2. Memory sharing between 64-bit and 32-bit processes is still possibly
by using addresses < 4G.
x86 CPU support, better support for powerpc64, some new directives, and
many other things. Bump __FreeBSD_version, and add a note to UPDATING.
Thanks to the many people that have helped to test this.
Obtained from: projects/binutils-2.17
These changes are needed to fix n32 compile after the recent change of
mips n32 MACHINE_ARCH to mipsn32eb/mipsn32el.
Reviewed by: imp, bz (earlier version)
Also remove local overrides that are now in the contrib tree.
This is a direct commit to contrib/ as we will no longer import any
newer groff snapshots, due to licensing issues.
MFC after: 3 weeks
dialog is distributed from GPLv2 to LGPLv2 and introduces a number of new
features and a new and better libdialog API. The existing libdialog will
be kept temporarily as libodialog for compatibility purposes until sade,
sysinstall and tzsetup have been either updated or replaced.
__FreeBSD_version is now 900030.
Discussed on: -current
Approved by: core
Obtained from: http://invisible-island.net/dialog
It was used mainly to discover and fix some 64-bit portability problems
before 64-bit arches were widely available.
Discussed with: bde
Approved by: kib (mentor)
Implement MACHINE_ARCH=mips64e[lb] to build N64 images. This replaces
MACHINE_ARCH=mipse[lb] TARGET_ABI=n64.
MACHINE_ARCH=mipsn32e[lb] has been added, but currently requires
WITHOUT_CDDL due to atomic issues in libzfs. I've not investigated
this much, but implemented this to preserve as much of the TARGET_ABI
functionality that I could. Since its presence doesn't affect the
working cases, I've kept it in for now.
Added mips64e[lb] to make universe, so more kernels build.
And I think this (finally) closes the curtain on the tbemd tree.
thread specific informations.
In order to do that, and in order to avoid KBI breakage with existing
infrastructure the following semantic is implemented:
- For live programs, a new member to the PT_LWPINFO is added (pl_tdname)
- For cores, a new ELF note is added (NT_THRMISC) that can be used for
storing thread specific, miscellaneous, informations. Right now it is
just popluated with a thread name.
GDB, then, retrieves the correct informations from the corefile via the
BFD interface, as it groks the ELF notes and create appropriate
pseudo-sections.
Sponsored by: Sandvine Incorporated
Tested by: gianni
Discussed with: dim, kan, kib
MFC after: 2 weeks
it exists in order to allow arch-specific overrides. This fixes the
binutils (and world) build on powerpc64 after recent TBEMD merges.
Reviewed by: imp
I've had a report of a sparc64 system where cc1 generates illegal
instructions. We still have to diagnose this properly, but instead of
hosing all sparc64 boxes out there, fall back to libgcc to prevent more
damage.
Reported by: Florian Smeets
libcompiler_rt.a is a BSD licensed C language runtime, which implements
many routines which are linked into binaries on architectures where
certain functionality is missing (e.g. 64 bits mul/div on i386).
Unfortunately, libcompiler_rt cannot replace libgcc entirely. Certain
features, such as an unwinder for exception handling, are missing.
That's why only libgcc.a is replaced for now, because this one does seem
to be complete.
Tested by: rene (amd64), nwhitehorn (powerpc), droso (i386 exprun)
and many others. Thanks!
Obtained from: user/ed/compiler-rt
Once we use libcompiler_rt, the LIB-line must go, to prevent libgcc.a
from being built. Therefore, just hardcode the name.
Obtained from: user/ed/compiler-rt
TARGET_BIG_ENDIAN is now completely dead, except where it was
originally supposed to be used (internally in the toolchain building).
TARGET_ARCH has changed in three cases:
(1) Little endian mips has changed to mipsel.
(2) Big endian mips has changed to mipseb.
(3) Big endian arm has changed to armeb.
Some additional changes are needed to make 'make universe' work on arm
and mips after this change, so those are commented out for now.
UPDATING information will be forthcoming. Any remaining rough edges
will be hammered out in -current.
This is done by prepending the file to elfxx-ia64, not appending it.
Additionally, reduce diffs between Makefile.amd64 and Makefile.ia64;
instead of echo'ing defines in Makefiles, just add the needed define to
elf-fbsd-brand.c directly, as it is only used for amd64 and ia64.
