When running several builders in parallel, on QEMU, with 8GB of
memory, a fatal kernel trap (0x300 (data storage interrupt))
caused by llan driver is sometimes observed, when the system
starts to run out of swap space.
This happens because, at llan_intr(), a phyp call to add a
logical LAN buffer is always made when llan_add_rxbuf() fails,
even if it fails to allocate a new buffer.
PR: 235489
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D19084
%r8, %r10, and on non-KPTI configuration %r9 were not restored on fast
return from a syscall.
Reviewed by: markj
Approved by: so
Security: CVE-2019-5595
Sponsored by: The FreeBSD Foundation
MFC after: 0 minutes
when TEKEN_CONS25 is configured. Fix this by adding a function to
set the flag that enables the fix and always calling this function
for syscons.
Expand the man page for teken_set_cons25(). This function is not
very useful since it can only set but not clear 1 flag. In practice,
it is only used when TEKEN_CONS25 is configured and all that does is
choose the the default emulation for syscons at compile time.
are terminated by 2 NULs, but only 1 NUL was zapped. Zapping only 1
NUL just splits the first string into an empty string and a corrupted
string. All other strings in static hints and env remained live early
in the boot when they were supposed to be disabled.
Support calling init_static_kenv() very early in the boot, so as to
use the env very early in the boot. Then the pointer to the loader
env may change after the first call due to enabling paging or otherwise
remapping the pointer. Another call is needed to register the change.
Don't use the previous pointer in this (or any) later call.
Reviewed by: kib
Changelist:
- Replace ND, D and RD macros with nm_prdis, nm_prinf, nm_prerr
and nm_prlim, to avoid possible naming conflicts.
- Add netmap_krings_mode_commit() helper function and use that
to reduce code duplication.
- Refactor pipes control code to export some functions that
can be reused by the veth driver (on Linux) and epair(4).
- Add check to reject API requests with version less than 11.
- Small code refactoring for the null adapter.
MFC after: 1 week
Bump up MAX_HWCNT and MAX_EXCNT to 32 when ACPI is enabled. These are
the sizes of the hwregions and exregions arrays respectively. ACPI
firmware typically has more memory regions and the current value of
16 is not sufficient for some platforms.
This commit fixes a failure seen with AMI firmware on Cavium's Sabre
ThunderX2 reference platform. This platform needs 21 physical memory
regions and 18 excluded regions to boot correctly with the current
firmware release.
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D19073
It appears idling via 'wait' on e5500 causes strange behaviors, such as
top(1) simply hanging sporadically, until input. Until this can possibly be
sorted out (interrupt issue?), just don't idle on this hardware. The SoCs
are low power already, and the wait state doesn't save much anyway.
List is a 'read'-type operation that does not modify shared state; it's safe
for multiple thread to proceed concurrently. This is reflected in the vnode
operation LISTEXTATTR locking protocol specification, which only requires a
shared lock.
(Similar to previous r248933.)
Reported by: Case van Rij <case.vanrij AT isilon.com>
Reviewed by: kib, mjg
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D19082
Use recent best practices for Copyright form at the top of
the license:
1. Remove all the All Rights Reserved clauses on our stuff. Where we
piggybacked others, use a separate line to make things clear.
2. Use "Netflix, Inc." everywhere.
3. Use a single line for the copyright for grep friendliness.
4. Use date ranges in all places for our stuff.
Approved by: Netflix Legal (who gave me the form), adrian@ (pmc files)
controller datasheet revision 3.3, in the context of Ethernet
MACs the control data describing the packet buffers typically
are named "descriptors". Each of these descriptors references
one buffer, multiple of which a packet can be composed of.
By contrast, in comments, messages and the names of structure
members, iflib(4) refers to DMA resources employed for RX and
TX buffers (rather than control data) as "desc(riptors)".
This odd naming convention of iflib(4) made reviewing r343085
and identifying wrong and missing bus_dmamap_sync(9) calls in
particular way harder than it already is. This convention may
also explain why the netmap(4) part of iflib(4) pairs the DMA
tags for control data with DMA maps of buffers and vice versa
in calls to bus_dma(9) functions.
Therefore, change iflib(4) to refer to buf(fers) when buffers
and not the usual understanding of descriptors is meant. This
change does not include corrections to the DMA resources used
in the netmap(4) parts. However, it revises error messages to
state which kind of allocation/creation failed. Specifically,
the "Unable to allocate tx_buffer (map) memory" copy & pasted
inappropriately on several occasions was replaced with proper
messages.
o Enhance some other error messages to indicate which half - RX
or TX - they apply to instead of using identical text in both
cases and generally canonicalize them.
o Correct the descriptions of iflib_{r,t}xsd_alloc() to reflect
reality; current code doesn't use {r,t}x_buffer structures.
o In iflib_queues_alloc():
- Remove redundant BUS_DMA_NOWAIT of iflib_dma_alloc() calls,
- change the M_WAITOK from malloc(9) calls into M_NOWAIT. The
return values are already checked, deferred DMA allocations
not being an option at this point, BUS_DMA_NOWAIT has to be
used anyway and prior malloc(9) calls in this function also
specify M_NOWAIT.
Reviewed by: shurd
Differential Revision: https://reviews.freebsd.org/D19067
Compiling a GENERIC kernel for i386 with clang 8.0 results in the
following warning:
/usr/src/sys/i386/i386/sys_machdep.c:542:40: error: 'sizeof ((ldt))' will return the size of the pointer, not the array itself [-Werror,-Wsizeof-pointer-div]
nldt = pldt != NULL ? pldt->ldt_len : nitems(ldt);
^~~~~~~~~~~
/usr/src/sys/sys/param.h:299:32: note: expanded from macro 'nitems'
#define nitems(x) (sizeof((x)) / sizeof((x)[0]))
~~~~~~~~~~~ ^
Indeed, 'ldt' is declared as 'union descriptor *', so nitems() is not
the right way to determine the number of LDTs. Instead, the NLDT define
from sys/x86/include/segments.h should be used.
Reviewed by: kib
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19074
Currently, the trap code switches to the the temporary stack in the dbtrap
section. It works in most cases, but in the beginning of the execution, the
temp stack is being used, as starting in the powerpc_init() code.
In this current scenario, the stack is being overwritten, which causes the
return of breakpoint() to take abnormal execution.
This current patchset create a small stack to use by the dbtrap: codepath
avoiding the corruption of the temporary stack.
PR: 224872
Submitted by: breno.leitao_gmail.com
Reviewed by: jhibbits
Differential Revision: https://reviews.freebsd.org/D14484
Otherwise the lock might recurse in faultin() if the process is
swapped out.
Reported by: zeising
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
On CPUs supporting cmpxchg8b, fetch is performed by cmpxchg8b on
corresponding CPU slot, which unconditionally write to the slot. If
for that slot, the owner CPU increments it, then both CPUs might run
the cmpxchg8b instruction concurrently and this might race and
override the incremental write. So the counter update would be lost.
Fix it by implementing fetch as IPI and accumulation of result. It is
acceptable for rare counter64 fetch operation to be more expensive.
Diagnosed and tested by: Andreas Longwitz <longwitz@incore.de>
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
This is a step towards being able to free pages without the page
lock held. The approach is simply to add an implementation of
vm_page_dequeue_deferred() which does not assert that the page
lock is held. Formally, the page lock is required to set
PGA_DEQUEUE, but in the case of vm_page_free_prep() we get the
same mutual exclusion for free by virtue of the fact that no
other references to the page may exist.
No functional change intended.
Reviewed by: kib (previous version)
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19065
To detect the case where the page is already marked for a deferred
dequeue, we must read the "queue" and "aflags" fields in a
precise order. Otherwise, a race with a concurrent
vm_page_dequeue_complete() could leave the page with PGA_DEQUEUE
set despite it already having been dequeued. Fix the problem by
using vm_page_queue() to check the queue state, which correctly
handles the race.
Reviewed by: kib
Tested by: pho
MFC after: 3 days
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19039
This allows userspace to trace the kernel using the coverage sanitizer
found in clang. It will also allow other coverage tools to be built as
modules and attach into the same framework.
Sponsored by: DARPA, AFRL
never get here, however a test for SOLARIS, as redundant as this test is,
serves to document that this is the illumos definition. This should help
those who come after me to follow the code more easily.
MFC after: 1 month
Remove #ifdefs for ancient and irrelevant operating systems from
ipfilter.
When ipfilter was written the UNIX and UNIX-like systems in use
were diverse and plentiful. IRIX, Tru64 (OSF/1) don't exist any
more. OpenBSD removed ipfilter shortly after the first time the
ipfilter license terms changed in the early 2000's. ipfilter on AIX,
HP/UX, and Linux never really caught on. Removal of code for operating
systems that ipfilter will never run on again will simplify the code
making it easier to fix bugs, complete partially implemented features,
and extend ipfilter.
Unsupported previous version FreeBSD code and some older NetBSD code
has also been removed.
What remains is supported FreeBSD, NetBSD, and illumos. FreeBSD and
NetBSD have collaborated exchanging patches, while illumos has expressed
willingness to have their ipfilter updated to 5.1.2, provided their
zone-specific updates to their ipfilter are merged (which are of interest
to FreeBSD to allow control of ipfilters in jails from the global zone).
Reviewed by: glebius@
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D19006
That should shorten 'ifconfig <wlan> list txparam' output since
unsupported modes will not be shown.
Checked with RTL8188EE, STA mode.
MFC after: 2 weeks
Do not try to clear 'basic rate' bit from roamRate; it cannot be here and,
actually, this operation clears 'MCS rate' bit instead, breaking comparison
for 11n / 11ac modes.
Tested with RTL8188CUS, HOSTAP mode + RTL8821AU, STA mode.
MFC after: 3 days
ifconfig(8) prints per-mode parameters if they are non-zero; since
we have 13 possible modes with 3...5 typically supported this change
should greatly reduce amount of information for 'ifconfig <wlan> list roam'
command.
While here ensure that sta_roam_check() will not use roaming parameters
for unsupported modes (it should not).
This change effectively reverts r188776.
MFC after: 2 weeks
Add SYNC_KLOOP_MODE option, and add support for direct mode, where application
executes the TXSYNC and RXSYNC in the context of the ioeventfd wake up callback.
MFC after: 5 days
When in MSI mode, the device was only being configured with one
interrupt index, but it needs two - one for the actual interrupt and
one to park the tx queue at.
Also clarified comments relating to interrupt index assignment.
Reported by: Yuri Pankov <yuripv@yuripv.net>
MFC after: 1 day
The XIVE (External Interrupt Virtualization Engine) is a new interrupt
controller present in IBM's POWER9 processor. It's a very powerful,
very complex device using queues and shared memory to improve interrupt
dispatch performance in a virtualized environment.
This yields a ~10% performance improvment over the XICS emulation mode,
measured in both buildworld, and 'dd' from nvme to /dev/null.
Currently, this only supports native access.
MFC after: 1 month
512GB of ZFS ABD ARC means abd_chunk zone of 128M 4KB items. To manage
them UMA tries to allocate 2GB hash table, which size does not fit into
the int variable, causing later allocation failure, which makes ARC shrink
back below the 512GB, not letting it to use more RAM. With this change I
easily reached >700GB ARC size on 768GB RAM machine.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
With the current 24G memory limit for GENERIC, the boot time test
causes quite visible delay, amplified by the default
debug.late_console = 0.
The comment text is copied from the same setting explanation for
amd64.
Suggested by: bde
Discussed with: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 months
CPU and buses can manage up to the limit reported by cpu_maxphyaddr,
so set mem_rman to the value returned by cpu_getmaxphyaddr(). For the
PAE mode, it was missed both when rman_res_t was increased to
uintmax_t, and from the PAE merge commit.
When importing smaps or dump_avail chunks into memory rman, do not
blindly ignore resources which ends above the limit, chomp them
instead if start is below the limit. The same change was already done
to i386 add_physmap_entry().
Based on the submission by: bde
MFC after: 2 months
"slow" interrupt handler:
- Expand the list of INT_CAUSE registers known to the driver.
- Add decode information for many more bits but decouple it from the
rest of intr_info so that it is entirely optional.
- Call t4_fatal_err exactly once, and from the top level PL intr handler.
t4_fatal_err:
- Use t4_shutdown_adapter from the common code to stop the adapter.
- Stop servicing slow interrupts after the first fatal one.
Driver/firmware interaction:
- CH_DUMP_MBOX: note whether the mailbox being dumped is a command or a
reply or something else.
- Log the raw value of pcie_fw for some errors.
- Use correct log levels (debug vs. error).
Sponsored by: Chelsio Communications
kbd(4) (but only documented in atkbd(4)) maintains a table of strings
for 96 function keys. Using teken broke this 9+ years ago for the
most usable first 12 function keys and for 10 cursor keys, by supplying
its own non-programmable strings so that the keyboard driver's strings
are not used.
Fix this by supplying NULL in the teken layer for syscons in cons25 mode
so that the the strings are found in the kbd(4) layer.
vt needs more changes to use kbd(4)'s tables. Teken's cons25 table is
still needed to supply nonempty strings for vt in cons25 mode.
Keep using teken's xterm tables for both syscons and vt in xterm mode.
Function keys should at least default to xterm values in xterm mode,
and kbd(4) doesn't support this.
teken_set_cons25() sets a sticky flag to ask for the fix, and space is
reserved for another new flag. vt should set this flag when it uses
kbd(4)'s tables.
PR: 226553 (for vt)
consistently.
This inconsistency was observed when working on the bug reported in
PR 235256, although it does not fix the reported issue. The fix for
the PR will be a separate commit.
PR: 235256
Reviewed by: rrs@, Richard Scheffenegger
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D19033
The KPI have been reviewed and cleansed of features that were planned
back 20 years ago and never implemented. The pfil(9) internals have
been made opaque to protocols with only returned types and function
declarations exposed. The KPI is made more strict, but at the same time
more extensible, as kernel uses same command structures that userland
ioctl uses.
In nutshell [KA]PI is about declaring filtering points, declaring
filters and linking and unlinking them together.
New [KA]PI makes it possible to reconfigure pfil(9) configuration:
change order of hooks, rehook filter from one filtering point to a
different one, disconnect a hook on output leaving it on input only,
prepend/append a filter to existing list of filters.
Now it possible for a single packet filter to provide multiple rulesets
that may be linked to different points. Think of per-interface ACLs in
Cisco or Juniper. None of existing packet filters yet support that,
however limited usage is already possible, e.g. default ruleset can
be moved to single interface, as soon as interface would pride their
filtering points.
Another future feature is possiblity to create pfil heads, that provide
not an mbuf pointer but just a memory pointer with length. That would
allow filtering at very early stages of a packet lifecycle, e.g. when
packet has just been received by a NIC and no mbuf was yet allocated.
Differential Revision: https://reviews.freebsd.org/D18951
Not all child devices of the NVDIMM root device represent DIMM devices
which are present in the system. The spec says (ACPI 6.2, sec 9.20.2):
For each NVDIMM present or intended to be supported by platform,
platform firmware also exposes an NVDIMM device ... under the
NVDIMM root device.
Present NVDIMM devices are found by walking all of the NFIT table's
SPA ranges, then walking the NVDIMM regions mentioned by those SPA
ranges.
A set of NFIT walking helper functions are introduced to avoid the
need to splat the enumeration logic across several disparate
callbacks.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Sponsored by: Intel Corporation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18439
Move the enumeration of NVDIMM SPA ranges from the spa GEOM class
initializer into the NVDIMM root device. This will be necessary for a
later change where NVDIMM namespaces require NVDIMM device enumeration
to be reliably ordered before SPA enumeration.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Sponsored by: Intel Corporation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18734
anything except several assertions. This type is going to be used for
temporary on stack mbufs, that point into data in receive ring of a NIC,
that shall not be freed. Such mbuf can not be stored or reallocated, its
life time is current context.
Parts of the kobj(9) KPI assume a non-sleepable context for the purpose
of internal memory allocations, but currently have no way to signal an
allocation failure to the caller, so they just panic in this case. This
can occur even when kobj_create() is called with M_WAITOK. Fix some
instances of the problem by plumbing wait flags from kobj_create() through
internal subroutines. Change kobj_class_compile() to assume a sleepable
context when called externally, since all existing callers use it in a
sleepable context.
To fix the problem fully the kobj_init() KPI must be changed.
Reported and tested by: pho
Reviewed by: kib (previous version)
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19023
This patch and commit message are based on r340256 created by Jacob Keller:
The iflib stack does not disable TSO automatically when TXCSUM is
disabled, instead assuming that the driver will correctly handle TSOs
even when CSUM_IP is not set.
This results in iflib calling ixgbe_isc_txd_encap with packets which have
CSUM_IP_TSO, but do not have CSUM_IP or CSUM_IP_TCP set. Because of
this, ixgbe_tx_ctx_setup will not setup the IPv4 checksum offloading.
This results in bad TSO packets being sent if a user disables TXCSUM
without disabling TSO.
Fix this by updating the ixgbe_tx_ctx_setup function to check both
CSUM_IP and CSUM_IP_TSO when deciding whether to enable checksums.
Once this is corrected, another issue for TSO packets is revealed. The
driver sets IFLIB_NEED_ZERO_CSUM in order to enable a work around that
causes the ip->sum field to be zero'd. This is necessary for ix
hardware to correctly perform TSOs.
However, if TXCSUM is disabled, then the work around is not enabled, as
CSUM_IP will not be set when the iflib stack checks to see if it should
clear the sum field.
Fix this by adding IFLIB_TSO_INIT_IP to the iflib flags for the ix and
ixv interface files.
Once both of these changes are made, the ix and ixv drivers should
correctly offload TSO packets when TSO offload is enabled, regardless
of whether TXCSUM is enabled or disabled.
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed by: IntelNetworking
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18470
From Piotr:
This patch introduces adapter->task_requests register responsible for
recording requests for mod_task, msf_task, mbx_task, fdir_task and
phy_task calls. Instead of enqueueing these tasks with
GROUPTASK_ENQUEUE, handlers will be called directly from
ixgbe_if_update_admin_status() while holding ctx lock.
SIOCGIFXMEDIA ioctl() call reads adapter->media list. The list is
deleted and rewritten in ixgbe_handle_msf() task without holding ctx
lock. This change is needed to maintain data coherency when sharing
adapter info via ioctl() calls.
Patch co-authored by Krzysztof Galazka <krzysztof.galazka@intel.com>.
PR: 221317
Submitted by: Piotr Pietruszewski <piotr.pietruszewski@intel.com>
Reviewed by: sbruno@, IntelNetworking
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18468
lagg_capabilities() will set the capability once interfaces supporting
the feature are added to the lagg. Setting it on a lagg without any
interfaces is pointless as the if_snd_tag_alloc call will always fail
in that case.
Reviewed by: hselasky, gallatin
MFC after: 2 weeks
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D19040
The pfil(9) system is about to be converted to epoch(9) synchronization, so
we need [temporarily] go back with ipfw internal locking.
Discussed with: ae
iflib is already a module, but it is unconditionally compiled into the
kernel. There are drivers which do not need iflib(4), and there are
situations where somebody might not want iflib in kernel because of
using the corresponding driver as module.
Reviewed by: marius
Discussed with: erj
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D19041
Then bucket_alloc() also selects bucket size based on uz_count. However,
since zone lock is dropped, uz_count may reduce. In this case max may
be greater than ub_entries and that would yield into writing beyond end
of the allocation.
Reported by: pho
image as not compatible with ASLR.
Requested by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential revision: https://reviews.freebsd.org/D5603
length of the struct in memmove() rather than an unintialized variable.
This fixes the first of two kernel page faults when ipfs is invoked.
PR: 235110
Reported by: David.Boyd49@twc.com
MFC after: 2 weeks
SIFTR does not allow any kind of filtering, but captures every packet
processed by the TCP stack.
Often, only a specific session or service is of interest, and doing the
filtering in post-processing of the log adds to the overhead of SIFTR.
This adds a new sysctl net.inet.siftr.port_filter. When set to zero, all
packets get captured as previously. If set to any other value, only
packets where either the source or the destination ports match, are
captured in the log file.
Submitted by: Richard Scheffenegger
Reviewed by: Cheng Cui
Differential Revision: https://reviews.freebsd.org/D18897
In all cases where ZFS sends BIO_FLUSH, it first waits for all related
writes to complete, so its BIO_FLUSH does not care about strict ordering.
Removal of one makes life much easier at least for NVMe driver, which
hardware has no concept of request ordering, relying completely on software.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Other types, such as BIO_FLUSH or BIO_ZONE, or especially new/unknown ones,
may imply some degree of ordering even if strict ordering is not requested
explicitly.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
copyright.
When all member nations of the Buenos Aires Convention adopted the Berne
Convention, the phrase "All rights reserved" became unnecessary to assert
copyright. Remove it from files under my or Panasas's copyright. The files
related to jedec_dimm(4) also bear avg@'s copyright; he has approved this
change.
Approved by: avg
Sponsored by: Panasas
r212160 tightened this from always using MSG_SIMPLE_Q_TAG to always
MSG_ORDERED_Q_TAG. Since it also marked all BIO_FLUSH requests with
BIO_ORDERED, this commit changes nothing immediately, but it returns
BIO_FLUSH callers ability to actually specify ordering they really
need, alike to other request types.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
When using poll(), select() or kevent() on netmap file descriptors,
netmap executes the equivalent of NIOCTXSYNC and NIOCRXSYNC commands,
before collecting the events that are ready. In other words, the
poll/kevent callback has side effects. This is done to avoid the
overhead of two system call per iteration (e.g., poll() + ioctl(NIOC*XSYNC)).
When the kqueue subsystem invokes the kqueue(9) f_event callback
(netmap_knrw), it holds the lock of the struct knlist object associated
to the netmap port (the lock is provided at initialization, by calling
knlist_init_mtx).
However, netmap_knrw() may need to wake up another netmap port (or even
the same one), which means that it may need to call knote().
Since knote() needs the lock of the struct knlist object associated to
the to-be-wake-up netmap port, it is possible to have a lock order reversal
problem (AB/BA deadlock).
This change prevents the deadlock by executing the knote() call in a
per-selinfo taskqueue, where it is possible to hold a mutex.
Reviewed by: aleksandr.fedorov_itglobal.com
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18956
bus_teardown_intr(9) before pci_release_msi(9).
- Ensure that iflib(4) and associated drivers pass correct RIDs to
bus_release_resource(9) by obtaining the RIDs via rman_get_rid(9)
on the corresponding resources instead of using the RIDs initially
passed to bus_alloc_resource_any(9) as the latter function may
change those RIDs. Solely em(4) for the ioport resource (but not
others) and bnxt(4) were using the correct RIDs by caching the ones
returned by bus_alloc_resource_any(9).
- Change the logic of iflib_msix_init() around to only map the MSI-X
BAR if MSI-X is actually supported, i. e. pci_msix_count(9) returns
> 0. Otherwise the "Unable to map MSIX table " message triggers for
devices that simply don't support MSI-X and the user may think that
something is wrong while in fact everything works as expected.
- Put some (mostly redundant) debug messages emitted by iflib(4)
and em(4) during attachment under bootverbose. The non-verbose
output of em(4) seen during attachment now is close to the one
prior to the conversion to iflib(4).
- Replace various variants of spelling "MSI-X" (several in messages)
with "MSI-X" as used in the PCI specifications.
- Remove some trailing whitespace from messages emitted by iflib(4)
and change them to consistently start with uppercase.
- Remove some obsolete comments about releasing interrupts from
drivers and correct a few others.
Reviewed by: erj, Jacob Keller, shurd
Differential Revision: https://reviews.freebsd.org/D18980
The main differences with the currently implemented method are:
- Requires a local APIC EOI, since it doesn't bypass the local APIC
as the previous method used to do.
- Can be set to use different IDT vectors on each vCPU. Note that
FreeBSD doesn't make use of this feature since the event channel
IDT vector is reserved system wide.
Note that the old method of setting the event channel upcall is
not removed, and will be used as a fallback if this newly introduced
method is not available.
MFC after: 1 month
Sponsored by: Citrix Systems R&D
Effectively all i386 kernels now have two pmaps compiled in: one
managing PAE pagetables, and another non-PAE. The implementation is
selected at cold time depending on the CPU features. The vm_paddr_t is
always 64bit now. As result, nx bit can be used on all capable CPUs.
Option PAE only affects the bus_addr_t: it is still 32bit for non-PAE
configs, for drivers compatibility. Kernel layout, esp. max kernel
address, low memory PDEs and max user address (same as trampoline
start) are now same for PAE and for non-PAE regardless of the type of
page tables used.
Non-PAE kernel (when using PAE pagetables) can handle physical memory
up to 24G now, larger memory requires re-tuning the KVA consumers and
instead the code caps the maximum at 24G. Unfortunately, a lot of
drivers do not use busdma(9) properly so by default even 4G barrier is
not easy. There are two tunables added: hw.above4g_allow and
hw.above24g_allow, the first one is kept enabled for now to evaluate
the status on HEAD, second is only for dev use.
i386 now creates three freelists if there is any memory above 4G, to
allow proper bounce pages allocation. Also, VM_KMEM_SIZE_SCALE changed
from 3 to 1.
The PAE_TABLES kernel config option is retired.
In collaboarion with: pho
Discussed with: emaste
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18894
This fixes BIO_ORDERED semantics while also improving performance by:
- sleeping also before BIO_ORDERED bio, as defined, not only after;
- not queueing BIO_ORDERED bio to taskqueue if no other bios running;
- waking up sleeping taskqueue explicitly rather then rely on polling.
On Samsung SSD 970 PRO this shows sync write latency, measured with
`diskinfo -wS`, reduction from ~2ms to ~1.1ms by not sleeping without
reason till next HZ tick.
On the same device ZFS pool with 8 ZVOLs synchronously writing 4KB blocks
shows ~950 IOPS instead of ~750 IOPS before. I suspect ZFS does not need
BIO_ORDERED on BIO_FLUSH at all, but that will be next question.
MFC after: 2 weeks
Sponsored by: iXsystems, Inc.
Because of a typo, the code was mistakenly resetting the
vtnrx_vq pointer rather than vtntx_tq.
Reviewed by: bryanv
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D19015
handling for protocols without ports numbers.
Since port numbers were uninitialized for protocols like ICMP/ICMPv6,
ipfw_chk() used some non-zero values to create dynamic states, and due
this it failed to match replies with created states.
Reported by: Oliver Hartmann, Boris Lytochkin
Obtained from: Yandex LLC
X-MFC after: r342908
This will allow multiple consumers of the coverage data to be compiled
into the kernel together. The only requirement is only one can be
registered at a given point in time, however it is expected they will
only register when the coverage data is needed.
A new kernel conflig option COVERAGE is added. This will allow kcov to
become a module that can be loaded as needed, or compiled into the
kernel.
While here clean up the #include style a little.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18955
On sync-kloop stop, send a wake-up signal to the kloop, so that
waiting for the timeout is not needed.
Also, improve logging in netmap_freebsd.c.
MFC after: 3 days
January 2018 changes -r327723 and -r327821. The softdep_bp_to_mp()
function failed to include VFIFO as one of the valid cases.
Although fifo's do not allocate blocks in the filesystem, they will
allocate blocks if they use extended attributes (such as ACLs). Thus,
softdep_bp_to_mp() needs to return a non-NULL mount pointer when
presented with a fifo vnode so that the soft updates write complete
will properly process the soft updates structures associated with the
extended attribute blocks. It was the failure to process these soft
updates structures, thus leaving them hanging off the buffer, which
lead to the "panic: softdep_deallocate_dependencies: dangling deps"
when trying to clean up the buffer after it was written.
PR: 230962
Reported by: 2t8mr7kx9f@protonmail.com
Reviewed by: kib
Tested by: Peter Holm
MFC after: 1 week
Sponsored by: Netflix
Re-evaluating the ALTQ kernel configuration can be expensive,
particularly when there are a large number (hundreds or thousands) of
queues, and is wholly unnecessary in response to events on interfaces
that do not support ALTQ as such interfaces cannot be part of an ALTQ
configuration.
Reviewed by: kp
MFC after: 1 week
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D18918
The existence of a PV entry for a mapping guarantees that the mapping
exists, so we should not need to test for that.
Reviewed by: kib
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18866
RFC 3168 defines an ECN-setup SYN-ACK packet as on with the ECE flags
set and the CWR flags not set. The code was only checking if ECE flag
is set. This patch adds the check to verify that the CWR flags is not
set.
Submitted by: Richard Scheffenegger
Reviewed by: tuexen@
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18996
Enforce net80211 rates for control / management / multicast / EAPOL frames
and allow to override rate for unicast frames via ifconfig(8) 'ucastrate'
option; by default it still uses f/w rate adaptation for unicast frames.
MFC after: 1 week
The comment states that function always return a top of allocated mbuf;
however, the function actually return the overall mbuf chain top pointer.
Since there are already existing users of it (via m_getm(4) macro),
rephrase the comment and leave behavior unchanged.
PR: 134335
MFC after: 12 days
This includes the bump for cdevsw d_version. Otherwise, the impact on
the ABI (not KBI) is surprisingly low. The most important affected
interface is devname(3) and ttyname(3) which already correctly handle
long names (and ttyname(3) should not be affected at all).
Still, due to the d_version bump, I argue that the change is not MFC-able.
Requested by: mmacy
Reviewed by: jhb
Sponsored by: The FreeBSD Foundation
Differential revision: https://reviews.freebsd.org/D18932
corresponding bitmap before adding an mbuf has actually succeeded.
Previously, m_gethdr(M_NOWAIT, ...) failing caused a "hole" in the
RX ring but not in its bitmap. One implication of such a hole was
that in a subsequent call to _iflib_fl_refill() with the RX buffer
accounting still indicating another reclaimable buffer, bit_ffc(3)
nevertheless returned -1 in frag_idx which in turn caused havoc
when used as an index. Thus, additionally assert that frag_idx is
0 or greater.
Another possible consequence of a hole in the RX ring was a NULL-
dereference when trying to use the unallocated mbuf, for example
in iflib_rxd_pkt_get().
While at it, make the variable declarations in _iflib_fl_refill()
conform to style(9) and remove redundant checks already performed
by bit_ffc{,_at}(3).
- In iflib_queues_alloc(), don't pass redundant M_ZERO to bit_alloc(3).
Reported and tested by: pho
* There's no reason to have a while() loop here, because:
- if msleep returns 0, that means we were woken up by the interrupt handler,
and we are going to exit immediately as sc_fw_chunk_done will now be 1
(there is nothing else that sleeps on sc_fw.)
- if msleep doesn't return 0 (i.e. it returned ETIMEDOUT) then we will
exit immediately because of the if-test.
So, just use a single msleep() and then check sc_fw_chunk_done as before.
* The comment said we were sleeping for 5 seconds, but the msleep was only
for 1. Before r314065, this was 1 second and so was the comment,
and in that commit the comment was changed and the function call wasn't.
Possibly fixes failures to initialize uCode on certain devices.
Submitted by: Augustin Cavalier (waddlesplash gmail.com)
Obtained from: Haiku 132990ecdcb072f2ce597b5d497ff3e5b1f09c20
MFC after: 10 days
Wrap ieee80211_add_channel_list_2ghz into another function
which supplies default (1-14) channel list to it and drop
its copies from drivers.
Checked with RTL8188EE, country US / JP / KR / UA.
MFC after: 2 weeks
There is no reason for this variable to be tunable.
This variable is used as a barrier in few places.
Discussed with: pjd
MFC after: 2 weeks
Sponsored by: Fudo Security
set of known soft dependency data structures now includes: sd_worklist,
sd_inodedep, sd_allocdirect, sd_allocindir, and sd_mkdir. DDB can
also print lists of sd_allinodedeps, sd_mkdir_list, and sd_workhead.
The sd_workhead script is useful for listing all the dependencies
associated with a buffer, e.g. bp->b_dep.
Prefix the soft dependency show names with sd_ so that they sort
together when listed by DDB's "show help" and to distinguish them
from other data structures printable by DDB.
Sponsored by: Netflix
Maliciously formed, or badly corrupted, filesystems can cause kernel
panics. In general, such acts of foot-shooting can only be accomplished
by root, but in a world with VM images that is moving towards automated
mounts it is important to have some form of prevention.
Reported by: Christopher Krah, Thomas Barabosch, and Jan-Niclas Hilgert
of Fraunhofer FKIE.
Incidentaly this should also fix a memory corruption issue reported by
Dr Silvio Cesare of InfoSect.
Huge thanks to all reseachers for making us aware of the issue.
admbug: 872, 891
Reviewed by: fsu
Obtained from: NetBSD (with minor changes)
MFC after: 3 days
- Drain offload transmit queues when RATELIMIT is enabled but
TCP_OFFLOAD is not.
- Expose the per-VI nofldtxq and first_ofld_txq sysctls when
RATELIMIT is enabled but TCP_OFFLOAD is not.
- Clear offload transmit queue stats as part of a 'cxgbetool clearstats'
request when RATELIMIT is enabled but TCP_OFFLOAD is not.
Reviewed by: np
MFC after: 2 weeks
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D18966
Fix dublicate value in what is apparent copypaste mistake. The last value
in mask is supposed to be for counter 7, not counter 3.
PR: 229790
Submitted by: David Binderman <dcb314@hotmail.com>
MFC after: 1 week
cpuid and local cpu variable are unsigned so checking if value is less than zero
always yields false.
PR: 211088
Submitted by: David Binderman <dcb314@hotmail.com>
MFC after: 1 week
This allows the part of the rewrite of TCP reassembly in this
files to be MFCed to stable/11 with manual change.
MFC after: 3 days
Sponsored by: Netflix, Inc.
The new loop to sync and unload descriptors was indexed
by "i", rather than "j". The panic was caused by "i"
being advanced rather than "j", and eventually becoming
out of bounds.
Reviewed by: kib
MFC after: 3 days
Sponsored by: Netflix
When implementing support for IW10, an update in the computation
of the restart window used after an idle phase was missed. To
minimize code duplication, implement the logic in tcp_compute_initwnd()
and call it. This fixes a bug in NewReno, which was not aware of
IW10.
Submitted by: Richard Scheffenegger
Reviewed by: tuexen@
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18940
When cleaning up a vnet we free the counters in V_pf_default_rule and
V_pf_status from shutdown_pf(), but we can still use them later, for example
through pf_purge_expired_src_nodes().
Free them as the very last operation, as they rely on nothing else themselves.
PR: 235097
MFC after: 1 week
Replace in-place implementation with system-wide one; since it
guarantees non-zero result drop all less-than-one checks from
drivers and net80211.
MFC after: 2 weeks
connectivity.
Looking at past changes in this area like r337866, some refcounting
bugs have been introduced, one by one. For example like calling
in6m_disconnect() and in6m_rele_locked() in mld_v1_process_group_timer()
where previously no disconnect nor refcount decrement was done.
Calling in6m_disconnect() when it shouldn't causes IPv6 solitation to no
longer work, because all the multicast addresses receiving the solitation
messages are now deleted from the network interface.
This patch reverts some recent changes while improving the MLD
refcounting and concurrency model after the MLD code was converted
to using EPOCH(9).
List changes:
- All CK_STAILQ_FOREACH() macros are now properly enclosed into
EPOCH(9) sections. This simplifies assertion of locking inside
in6m_ifmultiaddr_get_inm().
- Corrected bad use of in6m_disconnect() leading to loss of IPv6
connectivity for MLD v1.
- Factored out checks for valid inm structure into
in6m_ifmultiaddr_get_inm().
PR: 233535
Differential Revision: https://reviews.freebsd.org/D18887
Reviewed by: bz (net)
Tested by: ae
MFC after: 1 week
Sponsored by: Mellanox Technologies
because the destructor will access the if_ioctl() callback in the ifnet
pointer which is about to be freed. This prevents use-after-free.
PR: 233535
Differential Revision: https://reviews.freebsd.org/D18887
Reviewed by: bz (net)
Tested by: ae
MFC after: 1 week
Sponsored by: Mellanox Technologies
* This hopefully avoids some firmware panics, I was occasionally seeing,
when iwm disconnects upon losing signal to an access point at some point.
* This is synchronizing the if_iwm_time_event.c file a bit more from the
corresponding Linux iwlwifi/mvm/time-event.c.
Taken-From: Linux iwlwifi
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (e8cb71584a6a72232c13151d60e57f7f229220eb)
* This is a mix of the OpenBSD Git 7fd9664469d1b717a307eebd74aeececbd3c41cc
change, and syncing with the Linux iwlwifi code.
Taken-From: Linux iwlwifi, and OpenBSD
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (706a3044afd27c3fecfdf57bec1695310e53e228)
* This avoids firmware resets in all the cases in iwm_newstate(). Instead
iwm_bring_down_firmware() is called, which tears down all the STA
connection state, according to the sc->sc_firmware_state value.
* Improve the behaviour of the LED blinking a bit, so it only blinks when
there really is a wireless scan going on.
* Print the newstate arg in debug output of iwm_newstate(), to help in
debugging.
This is inspired by the firmware state maintaining change in OpenBSD's iwm,
by stsp@openbsd.org (OpenBSD Git 0ddb056fb7370664b1d4b84392697cb17d1a414a).
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (8a41b10ac639d0609878696808387a6799d39b57)
* While there remove unused IWM_UCODE_TLV_CAPA_LMAC_UPLOAD definition,
which isn't defined in iwlwifi.
Taken-From: Linux iwlwifi
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (fd4f9de8bc72ea961e50829b45b59d0549040b7d)
* Remove outdated notifications IWM_SCAN_ABORT_CMD,
IWM_SCAN_START_NOTIFICATION and IWM_SCAN_RESULTS_NOTIFICATION.
* Remove unused enum iwm_scan_complete_status.
* Use the updated FW Api version 3 of struct iwm_scan_results_notif.
* No functional change, since struct iwm_scan_results_notif is never
accessed in iwm at the moment.
Taken-From: Linux iwlwifi commits 1083fd7391e989be52022f0f338e9dadc048b063
and 75118fdb63496e4611ab50380499ddd62b9de69f.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (c947b0b8dc96dabefd63f7b70d53695e36c7b64f)
* Rename some structs and struct members for firmware handling.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (4b1006a6e4d0f61d48c67b46e1f791e30837db67)
* There is (almost) nothing to do in suspend/resume if if_iwm has failed
during initialization (e.g. because of firmware load failure) and was
already uninitialized by iwm_detach_local().
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (67b5e090efb225654815fed91020db6cfc16bb19)
* We should load the firmware exactly once before the driver really
initializes the hardware the first time, and unload it at detach time.
There is no need to retrieve the firmware during execution of
iwm_mvm_load_ucode_wait_alive(), we should make sure we already have the
firmware data at hand before that.
* The existing sc_preinit_hook code fails to deal with the case where
if_iwm is loaded by the loader (or is statically linked) and the
firmware needs to be loaded from disk. So we can just call
iwm_read_firmware() from iwm_attach() directly.
* A separate solution will have to be added to properly defer the firmware
loading during bootup, until the necessary filesystem is mounted.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (0104ee1f4cb6a2313c00c2526c6ae98d42e5041d)
* Doing the iwm_prepare_card_hw() call in iwm_attach() only on Family 8000
hardware matches the code in Linux iwlwifi.
* While there remove DEFAULT_MAX_TX_POWER definition which is unused, and
has a value different from IWL_DEFAULT_MAX_TX_POWER in iwlwifi.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (e8560f8dc58df12a7c79a6bb4e6ccb156e001085)
* Rather than providing a non-zero index into the firmware RS table,
we should always use index 0 and update the firmware RS table whenever
our chosen tx rate for data-frames changes.
* Send IWM_LQ_CMD updates when the tx rate gets updated by the net80211
rate control (which is after we tell the tx status to the net80211
rate-control in iwm_mvm_rx_tx_cmd_single()).
* Disregard frames transferred with a different tx rate than the currently
selected rate for the rate-control calculations. This way we avoid
counting management frames (which are sent at a slow, and fixed rate),
as well as frames we added to the tx queue just before a new IWM_LQ_CMD
update took effect.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com> (Haiku)
Obtained from: DragonFlyBSD (5d6b465e288ac5b52d7115688d4e6516acbbea1c)
From Krzysztof:
Ensure that the entire data buffer passed from the NVM update tool is copied in
to kernel space and copied back out to user space using copyin() and copyout().
PR: 234104
Submitted by: Krzysztof Galazka <krzysztof.galazka@intel.com>
Reported by: Finn <ixbug@riseup.net>
MFC after: 5 days
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18817
From Jake:
In r341156 ("Fix first-packet completion", 2018-11-28) a hack to work
around a delta calculation determining how many descriptors were used
was added to ixl_isc_tx_credits_update_dwb.
The same fix was also applied to the em and igb drivers in r340310, and
to ix in r341156.
The hack checked the case where prev and cur were equal, and then added
one. This works, because by the time we do the delta check, we already
know there is at least one packet available, so the delta should be at
least one.
However, it's not a complete fix, and as indicated by the comment is
really a hack to work around the real bug.
The real problem is that the first time that we transmit a packet,
tx_cidx_processed will be set to point to the start of the ring.
Ultimately, the credits_update function expects it to point to the
*last* descriptor that was processed. Since we haven't yet processed any
descriptors, pointing it to 0 results in this incorrect calculation.
Fix the initialization code to have it point to the end of the ring
instead. One way to think about this, is that we are setting the value
to be one prior to the first available descriptor.
Doing so, corrects the delta calculation in all cases. The original fix
only works if the first packet has exactly one descriptor. Otherwise, we
will report 1 less than the correct value.
As part of this fix, also update the MPASS assertions to match the real
expectations. First, ensure that prev is not equal to cur, since this
should never happen. Second, remove the assertion about prev==0 || delta
!= 0. It looks like that originated from when the em driver was
converted to iflib. It seems like it was supposed to ensure that delta
was non-zero. However, because we originally returned 0 delta for the
first calculation, the "prev == 0" was tacked on.
Instead, replace this with a check that delta is greater than zero,
after the correction necessary when the ring pointers wrap around.
This new solution should fix the same bug as r341156 did, but in a more
robust way.
Submitted by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed by: shurd@
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18545
After the afdata read lock was converted to epoch(9), readers could
observe a linked LLE and block on the LLE while a thread was
unlinking the LLE. The writer would then release the lock and schedule
the LLE for deferred free, allowing readers to continue and potentially
schedule the LLE timer. By the point the timer fires, the structure is
freed, typically resulting in a crash in the callout subsystem.
Fix the problem by modifying the lookup path to check for the LLE_LINKED
flag upon acquiring the LLE lock. If it's not set, the lookup fails.
PR: 234296
Reviewed by: bz
Tested by: sbruno, Victor <chernov_victor@list.ru>,
Mike Andrews <mandrews@bit0.com>
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18906
The iterator should be reinitialized after every successful slab
allocation. A request to advance the iterator is interpreted as
an allocation failure, so a sufficiently large preallocation would
cause the iterator to believe that all domains were exhausted,
resulting in a sleep with the keg lock held. [1]
Also, keg_alloc_slab() should pass the unmodified wait flag to the
item initialization routine, which may use it to perform allocations
from other zones.
Reported and tested by: slavah
Diagnosed by: kib [1]
Reviewed by: kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Note that the affected interface is available only to root.
admbugs: 765
Reported by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Reviewed by: emaste, ram
MFC after: 1 day
Security: Kernel memory disclosure
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D18914
gmirror's sc_flags is shared between some on-disk state and some runtime
only state. There's no real reason for that and they could probably be
split up. Until they are, locate all of the flags for the same field
nearby each other in the source, for clarity.
No functional change.
Sponsored by: Dell EMC Isilon
Changelist:
- Add the proper memory barriers in the kloop ring processing
functions.
- Fix memory barriers usage in the user helpers (nm_sync_kloop_appl_write,
nm_sync_kloop_appl_read).
- Fix nm_kr_txempty() helper to look at rhead rather than rcur. This
is important since the kloop can read a value of rcur which is ahead
of the value of rhead (see explanation in nm_sync_kloop_appl_write)
- Remove obsolete ptnetmap_guest_write_kring_csb() and
ptnet_guest_read_kring_csb(), and update if_ptnet(4) to use those.
- Prepare in advance the arguments for netmap_sync_kloop_[tr]x_ring(),
to make the kloop faster.
- Provide kernel and user implementation for nm_ldld_barrier() and
nm_ldst_barrier()
MFC after: 2 weeks
The nm_os_selwakeup function needs to call knote() to wake up kqueue(9)
users. However, this function can be called from different code paths,
with different lock requirements.
This patch fixes the knote() call argument to match the relavant lock state.
Also, comments have been updated to reflect current code.
PR: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=219846
Reported by: Aleksandr Fedorov <aleksandr.fedorov@itglobal.com>
Reviewed by: markj
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18876
There is may be only 11b channel (since chanflags[] table
maps MODE_AUTO to the corresponding 11b channel flags).
Checked with RTL8812AU, STA mode.
MFC after: 5 days
Change the way how channel list mode <-> desired mode match is done:
- Match channel list mode for next non-auto desired modes:
* 11b: 11g, 11ng, 11acg;
* 11a: 11na, 11ac
- Add pre-defined channels only when one of the next conditions met:
* the desired channel mode is 'auto' or
* the desired channel and selected channel list modes are exactly
the same or
* the previous rule (11g / 11n / 11ac promotion) applies.
Before r275875 construction work properly for all except
11ng / 11na / 11acg / 11ac modes - these were broken at all
(i.e., the scan list was empty); after r275875 all checks were removed,
so scan table was populated by all device-compatible channels
(desired mode was ignored).
For example, if I will set 'ifconfig wlan0 mode 11ng' for RTL8821AU:
- pre-r275875: nothing, scan will not work;
- after r275875: both 11ng and 11na bands were scanned; also, since 11b
channel list was used, 14th channel was scanned too.
- after this change: only 11ng - 1-13 channels - are used for scanning.
Tested with:
* RTL8188EE, STA mode.
* RTL8821AU, STA mode.
MFC after: 5 days
This is more compatible with formatting tools and looks more normal.
Reported by: jhb (on a different review)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D18442
amd64 miniport drivers are allowed to use FPU which triggers "Unregistered use
of FPU in kernel" panic.
Wrap all variants of MSCALL with fpu_kern_enter/fpu_kern_leave. To reduce
amount of allocations/deallocations done via
fpu_kern_alloc_ctx/fpu_kern_free_ctx maintain cache of fpu_kern_ctx elements.
Based on the patch by Paul B Mahol
PR: 165622
Submitted by: Vlad Movchan <vladislav.movchan@gmail.com>
MFC after: 1 month
psn_len is controlled by user space, but we allocated memory based on it.
Check how much memory we might need at most (i.e. how many source nodes we
have) and limit the allocation to that.
Reported by: markj
MFC after: 1 week
Also, expose IFLIB_MAX_RX_SEGS to iflib drivers and add
iflib_dma_alloc_align() to the iflib API.
Performance is generally better with the tunable/sysctl
dev.vmx.<index>.iflib.tx_abdicate=1.
Reviewed by: shurd
MFC after: 1 week
Relnotes: yes
Sponsored by: RG Nets
Differential Revision: https://reviews.freebsd.org/D18761
Note that these interfaces are available only to root.
admbugs: 765
Reported by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Reviewed by: rmacklem
MFC after: 1 day
Security: Kernel memory disclosure
Sponsored by: The FreeBSD Foundation
The existing copyin(9) and copyout(9) routines on RISC-V perform only a
simple byte-by-byte copy. Improve their performance by performing
word-sized copies where possible.
Submitted by: Mitchell Horne <mhorne063@gmail.com>
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D18851
mean that the driver should taste the firmware in the KLD and use that
firmware's version for all its fw_install checks.
The driver gets firmware version information from compiled-in values by
default and this change allows custom (or older/newer) firmware modules
to be used with the stock driver.
There is no change in default behavior.
MFC after: 1 week
Sponsored by: Chelsio Communications
Most siginfo_to_lsiginfo callers already zeroed the l_siginfo_t before
callit it, but linux_waitid did not. Instead of zeroing in the called
function to address linux_waitid (as in commit 2e6ebe70), just do it in
linux_waitid.
admbugs: 765
Reported by: Vlad Tsyrklevich <vlad@tsyrklevich.net>
Reviewed by: Andrew
MFC after: 1 day
Security: Kernel stack memory disclosure
Sponsored by: The FreeBSD Foundation
U-Boot will leave the ephy reset de-asserted and the MAC soft reset will
fail on these boards with internal PHY and no link established. Toggle reset
again before proceeding to attach/init.
MFC after: 1 week
- Check if buffer can contain Rx descriptor before accessing it.
- Verify upper / lower bounds for frame length.
- Do not pass too short frames into ieee80211_find_rxnode().
While here:
- Move cleanup to the function end.
- Reuse IEEE80211_IS_DATA() macro.
MFC after: 1 week
- Discard frames that are bigger than MCLBYTES (to prevent buffer overrun).
- Check buffer length before accessing its contents.
- Fix len <-> dmalen check - the last includes Rx Wireless information
structure size.
- Fix out-of-bounds read during Rx node search for ACK / CTS frames
(monitor mode only).
While here:
- Mark few suspicious places with comments.
- Move common cleanup to the function end.
MFC after: 1 week
indicates an error. Also, do not remove it twice from the hf list in
this case.
Submitted by: Krishnamraju Eraparaju @ Chelsio
MFC after: 1 week
Sponsored by: Chelsio Communicatons
Since r287197 ieee80211com is a part of drivers softc; as a result,
after detach all pointers to it (iv_ic, ni_ic) are invalid. Most
possible users (tasks, interrupt handlers) are blocked / removed
when device is stopped; however, ioctl handlers were not tracked
and may crash if ieee80211com structure is accessed.
Since ieee80211com pointer access from ieee80211vap structure is not
protected by lock (constant after interface creation) and used in
many other places just use reference counting for ioctl handlers;
on detach set 'detached' flag and wait until reference counter goes to 0.
For HEAD ieee80211vap size was changed (__FreeBSD_version bumped);
however, in stable branches I'm going to split / reuse the last
iv_spare field for KBI stability.
Tested with:
- rsu(4), SIOCSIFCAP (-rxcsum) ioctl;
- rtwn_pci(4), SIOCG80211 / IEEE80211_IOC_HTPROTMODE ioctl.
MFC after: 1 week
Semicolon is a legal character in long names but not in 8.3 format.
Move it to respective character set.
PR: 140068
Submitted by: tom@uffner.com
MFC after: 3 weeks
The recent gcc versions (7 and 8 at least) can check for switch case
statements for fall through (implicit-fallthrough). When fall through
is intentional, the default method for warning suppression is to place
comment /* FALLTHROUGH */ exactly before next case statement.
Differential Revision: https://reviews.freebsd.org/D18577
For most wireless drivers Rx mbuf is allocated as one
contiguous chunk; only few are using chains for allocations -
but even then at least MCLBYTES (minus Rx descriptor size) is
available in the first mbuf.
In addition to the above, m_pullup was never called here - otherwise,
reallocation will break post-crypto_decap logic (ieee80211_decap,
ieee80211_deliver_data...), so just remove it; length check is left
in case if some truncated frame appears here.
PR: 234241
MFC after: 1 week
Book-E powerpc uses 64-bit vm_paddr_t, and 32-bit powerpc has 32-bit pointers,
so gcc errors with cast to pointer from integer of different size. As this will
not actually be used in reality anyway, simply quiet the warning by casting
through uintptr_t.
MFC after: 3 weeks
MFC with: r343168
sendfile(2) appears to now use DMAP wherever possible. These addresses are not
managed by pmap, so pmap_kextract() returns a 0 physical address, causing
failure.
This change fixes nginx running on P5020 SoC.
MFC after: 3 weeks
The powerpc_intr structure is not zero-initialized, so on an invariants
build would panic in the xics driver with an invalid pointer. Also fix the
xics driver to share the private data setup code between xics_enable() and
xics_bind().
Reported by: Leonardo Bianconi
For parity with Intel hosts, which already mask out the CPUID feature
bits that indicate the presence of the SPEC_CTRL MSR, do the same on
AMD.
Eventually we may want to have a better support story for guests, but
for now, limit the damage of incorrectly indicating an MSR we do not yet
support.
Eventually, we may want a generic CPUID override system for
administrators, or for minimum supported feature set in heterogenous
environments with failover. That is a much larger scope effort than
this bug fix.
PR: 235010
Reported by: Rys Sommefeldt <rys AT sommefeldt.com>
Sponsored by: Dell EMC Isilon
Correct a logic error.
Only disable when already enabled or enable when disabled.
Submitted by: Richard Scheffenegger
Reviewed by: Cheng Cui
Obtained from: Cheng Cui
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18885
Without HID_IGNORE quirk enabled these models appear in the system as a uhid
devices while NUT (Network UPS Tool) expects them to be ugen.
PR: 131521
Submitted by: Naoyuki Tai <ntai@smartfruit.com>, John Bayly <john.bayly@tipstrade.net>
MFC after: 1 week
If i386 has more than 4G of memory, allow the same number of busdma
bounce pages as for amd64. In fact, in this case bouncing sometimes
is much heavier than on amd64.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18854
Right now bus_addr_t and vm_paddr_t are always aliased to the same
underlying integer type on x86, which makes the interchange hard to
detect. Shortly, i386 kernel would use uint64_t for vm_paddr_t to
enable automatic use of PAE paging structures if hardware allows it,
while bus_addr_t would be extended to 64bit only when PAE option is
specified.
Fix all places that were identified as using bus_addr_t while page
address was assumed. This was performed by testing the complete PAE
merging patch on machine with > 4G of RAM enabled.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18854
In order to allow single kernel to use PAE pagetables on i386 if
hardware supports it, and fall back to classic two-level paging
structures if not, superpage code should be able to adopt to either 2M
or 4M superpages size. There I make MI VM structures large enough to
track the biggest possible superpage, by allowing architecture to
define VM_NFREEORDER_MAX and VM_LEVEL_0_ORDER_MAX constants.
Corresponding VM_NFREEORDER and VM_LEVEL_0_ORDER symbols can be
defined as runtime values and must be less than the _MAX constants.
If architecture does not define _MAXs, it is assumed that _MAX ==
normal constant.
Reviewed by: markj
Tested by: pho (as part of the larger patch)
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18853
The SPA ids are published numbers, so it's safe (if not a bit
annoying) to copy them into a source file.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Sponsored by: Intel Corporation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18733
The NVDIMM root device is parent to the individual ACPI NVDIMM
devices. Add a driver for the NVDIMM root device that can own
enumeration of NVDIMM devices as well as NVDIMM SPA ranges that the
system has.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Sponsored by: Intel Corporation
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18346
Fix missing initialisation of sc_flags into a valid sync state on clone which
breaks carp in pfsync.
This regression was introduce by r342051.
PR: 235005
Submitted by: smh@FreeBSD.org
Pointy hat to: kp
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D18882
- Add ADA_Q_NO_TRIM quirk to be used with the device that falsely advertise TRIM support
- Add ADA_Q_NO_TRIM entry for KingDian S200 SSD
PR: 222802
Submitted by: Bertrand Petit <bsdpr@phoe.frmug.org>
MFC after: 1 week
Even M_WAITOK callers must check for failure. For example, if the device is
quiescing, either due to automatic error-recovery induced reset, or due to
administrative detach, the routine will return ENXIO and the acquire
reference will not be held. So, there is no mode in which it is safe to
assume the routine succeeds without checking.
Sponsored by: Dell EMC Isilon
This was intended to fix the soft reset timeout on boot for OrangePi One/R1
with internal PHY, but seems to cause other problems later on due to soft
resetting around some state changes that may or may not make the NIC
non-functional.
Reverting this for now while a better solution is sought out.
An integrity check such as a check-hash or a cross-correlation failed.
The integrity error falls between EINVAL that identifies errors in
parameters to a system call and EIO that identifies errors with the
underlying storage media. EINTEGRITY is typically raised by intermediate
kernel layers such as a filesystem or an in-kernel GEOM subsystem when
they detect inconsistencies. Uses include allowing the mount(8) command
to return a different exit value to automate the running of fsck(8)
during a system boot.
These changes make no use of the new error, they just add it. Later
commits will be made for the use of the new error number and it will
be added to additional manual pages as appropriate.
Reviewed by: gnn, dim, brueffer, imp
Discussed with: kib, cem, emaste, ed, jilles
Differential Revision: https://reviews.freebsd.org/D18765
Add parentheses to perform assignment before comparison. The prior
condition worked because fdt_parent_addr_cells returns 1 for the DTB
on which fdt_fixup_ranges is called and accidentally par_addr_cells
ends up to be set to the same value.
PR: 210705
Submitted by: David Binderman <dcb314@hotmail.com>
MFC after: 1 week
From NetBSD: Since the MAC can get stuck in reset state with no link, ignore
reset timeouts and continue with initializing the device.
Fixes "soft reset timeout" issue at boot with no network cable plugged in.
awg_init may be called multiple times throughout normal interface usage, so
the tx/rx descriptor base address registers must be written after each MAC
reset and are moved as such.
This problem has been observed on FreeBSD, H3/H2+ devices with an internal
PHY (includes OrangePi R1, OrangePi One at least).
Reviewed by: manu, ganbold
Obtained from: NetBSD
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D18844
Generic Tx stats fixes:
- do not try to parse "aggregation status" for single frames; send them
to iwn_tx_done() instead;
- try to attach mbuf / node reference pair to reported BA events;
allows to fix reported status for ieee80211_tx_complete() and ifnet counters
(previously all A-MPDU frames were counted as failed - see PR 210211);
requires few more firmware bug workarounds;
- preserve short / long retry counters for wlan_amrr(4)
(disabled for now - causes significant performance degradation).
- Add new IWN_DEBUG_AMPDU debug category.
- Add one more check into iwn_tx_data() to prevent aggregation ring
overflow.
- Workaround 'seqno % 256' != 'current Tx slot' case (until D9195 is not
in the tree).
- Improve watchdog timer updates (previously watchdog check was omitted
when at least one frame was transmitted).
- Stop Tx when memory leak in currently used ring was detected (unlikely
to happen).
- Few other minor fixes.
Was previously tested with:
- Intel 6205, STA mode (Tx aggregation behaves much better now).
- Intel 4965AGN, STA mode (still unstable).
PR: 192641, 210211
Reviewed by: adrian, dhw
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D10728
Rate tables have this bit set to indicate minimal set of basic rates;
however, it overlappes with MCS bit, so rate2ridx() will treat them as
an 11n rate.
Due to the current rates setup the issue can be reproduced only
in 5GHz band with 11n / protection enabled.
Tested with RTL8821AU, HOSTAP mode.
MFC after: 5 days
- Specify BUS_DMA_NOWAIT for bus_dmamap_load() on rx refill, since
callbacks are not supposed to be used.
- Match tso/non-tso tags to corresponding tx map operations. Create
separate tso maps for tx descriptors. In particular, do not use
non-tso tag to load, unload, or destroy a map created with tso tag.
- Add missed bus_dmamap_sync() calls.
Submitted by: marius.
Reported and tested by: pho
Reviewed by: marius
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Based on the description in Linux man page.
Reviewed by: markj, ngie (previous version)
Sponsored by: Mellanox Technologies
MFC after: 1 week
Differential revision: https://reviews.freebsd.org/D18837
If fsqrts is emulated with +INF as its argument, the 0 return value causes a
NULL pointer dereference, panicking the system. Follow the PowerISA and
return +INF with no FP exception.
MFC after: 1 week
vmm's CPUID emulation presented Intel topology information to the guest, but
disabled AMD topology information and in some cases passed through garbage.
I.e., CPUID leaves 0x8000_001[de] were passed through to the guest, but
guest CPUs can migrate between host threads, so the information presented
was not consistent. This could easily be observed with 'cpucontrol -i 0xfoo
/dev/cpuctl0'.
Slightly improve this situation by enabling the AMD topology feature flag
and presenting at least the CPUID fields used by FreeBSD itself to probe
topology on more modern AMD64 hardware (Family 15h+). Older stuff is
probably less interesting. I have not been able to empirically confirm it
is sufficient, but it should not regress anything either.
Reviewed by: araujo (previous version)
Relnotes: sure
In FreeBSD, this is normal situation that the Tx ring is being full. In
hat case, the packet is put back into drbr and the next attempt to send
it is taken after the cleanup.
Too much logs like this can cause system instability and even cause the
device reset (because keep alive or cleanup could be missed).
To fix that, the log level of this message is changed to debug.
Upon this change upgrade the driver version to v0.8.2.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon, Inc.
- Remove CS=2 entry from spigen-rpi2 since it didn't work
- Add spigen-rpi3 overlay for Raspberry Pi 3
- Enable rpi overlay modules for GENERIC kernel on aarch64
PR: 233489
Submitted by: bobf@mrp3.com
Reviewed by: db
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D16088
upstream it seems).
The tlv variable was changed to a pointer but the advancement of the data pointer
was left as sizeof(tlv). While the sizeof the (now) pointer equals the
sizeof 2 x uint32_t (size of the struct) on 64bit platforms, on 32bit platforms
the size of the advancement of the data pointer was wrong leading to
firmware load issues.
Correctly advance the data pointer by the size of the structure and not by
the size of a pointer.
PR: 219683
Submitted by: waddlesplash gamil.com (Haiku) on irc
MFC after: 1 week
