Add support for simple NVDIMM v1.2 namespaces from the UEFI
version 2.7 specification. The combination of NVDIMM regions and
labels can lead to a wide variety of namespace layouts. Here we
support a simple subset of namespaces where each NVDIMM SPA range
is composed of a single region per member dimm.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Discussed with: kib
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18736
When attaching to NVDIMM devices, read and verify the namespace
labels from the special namespace label storage area. A later
change will expose NVDIMM namespaces derived from this label data.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Discussed with: kib
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18735
Separate code for exposing a device backed by a system physical
address range away from the NVDIMM spa code. This will allow a
future patch to add support for NVDIMM namespaces while using the
same device code.
Submitted by: D Scott Phillips <d.scott.phillips@intel.com>
Reviewed by: bwidawsk
MFC after: 1 week
Sponsored by: Intel Corporation
Differential Revision: https://reviews.freebsd.org/D18736
A pointer is first tested for NULL. If non-NULL, another pointer is
set equal to the first. The second pointer is then checked for NULL
and an error path taken if so. This second test and the associated
path is dead code as the pointer value, having just been checked for
NULL, cannot be NULL at this point. Remove the dead code.
Reported by: Coverity
Reviewed by: daniel.william.ryan_gmail.com, vangyzen
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D19165
this one should also work on amd64 and sparc64.
LINT was broken in r312910 with the removal of pc98 support, by changing
the pathname in UKBD_DFLT_KEYBAP from a removed pc98 file to a nonexistent
file.
There are many bugs nearby. Some are:
- the error is not properly detected and handled by make(1), because
kbdcontrol(8) exits with status 0 after failing to find the keymap file
- UKBD_DFLT_KEYBAP is supposed to be MI, and is in MI NOTES to try enforce
this, but 5 out of 8 arches don't support it
- LINT seems to have been broken by this in only 7 out of 8 arches. mips
breaks test coverage instead, by killing this option in its MD NOTES.
arm kills ukbd but that is not enough to configure an unsupported option
used only by ukbd.
Add or fix options to control static and dynamic configuration. Keep
the default of scteken, but default to statically configuring all available
emulators (now 3 instead of 1).
The dumb emulator is almost usable. libedit and libreadline handle
dumb terminals perfectly for at least shell history. less(1) works
as well as possible except on exit. But curses programs make messes.
The dumb emulator has strange color support, with 2 dumb colors for
normal output but fancy colorization for the cursor, mouse pointer and
(with a non-dumb initial emulator) for low-level console output.
Using the sc emulator instead of the default of scteken fixes at least
the following bugs:
- NUL is a printing character in cons25 but not in teken
- teken doesn't support fixed colors for "reverse" video.
- The best versions of sc are about 10 times faster than scteken (for
printing to the frame buffer). This version is only about 5 times
faster.
Fix configuration features:
- make SC_DFLT_TERM (for setting the initial emulator) a normal option.
Add configuration features:
- negative options SC_NO_TERM_* for omitting emulators in the static config.
Modules for emulators might work, but I don't know of any
- vidcontrol -e shows the available emulators
- vidcontrol -E <emulator> sets the active emulator.
fasttrap hooks the userspace breakpoint handler; the hook looks up the
breakpoint address in a hash table of tracepoints. It is possible for
the tracepoint to be removed by a different thread in between the
breakpoint trap and the hash table lookup, in which case SIGTRAP gets
delivered to the target process. Fix the problem by adding a
per-process generation counter that gets incremented when a tracepoint
belonging to that process is removed. Then, when a lookup fails, the
trapping instruction is restarted if the thread's counter doesn't match
that of the process.
Reviewed by: cem
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D19273
An upcoming bug fix requires 64-bit atomics, which aren't implemented on
powerpc. The powerpc port of fasttrap is incomplete anyway and doesn't
get loaded by dtraceall.ko on powerpc because of a missing dependency;
it's presumed that it's effectively unused.
Discussed with: jhibbits
MFC after: 2 weeks
First remove ifdefs of the unsupported option SC_DUMB_TERMINAL which
prevented building using both in the same kernel and broke regression
tests. This option will be replaced by per-emulator supported options.
The dumb emulator rotted with KSE in r83366, but usually compiled since
it is ifdefed to nothing unless SC_DUMB_TERMINAL is defined. The type
of an unused function parameter changed.
Both emulators rotted when 2 new methods were added while the emulators
were removed. Only null methods are needed, but null function pointers
give panics instead.
The wildcard in the default for the unsupported option SC_DFLT_TERM
never really worked. It tends to prefer the dumb emulator when multiple
emulators are configured. Change it to prefer scteken for compatibility.
is easier to configure. It is MI, unlike some of the other syscons files
already in the MI list.
Move scvtb.c similarly. It is needed whenever sc is configured, and is
more MI than most of the files already in the MI list.
This only changes the combined list for arm64 and mips. These arches
already cannot build sc or even NOTES.
- Do not explicitly count active descriptors. It allows hardware reset
to happen while device is still referenced, plus simplifies locking.
- Do not stop/start callout each time the queue becomes empty. Let it
run to completion and rearm if needed, that is much cheaper then to touch
it every time, plus also simplifies locking.
- Decouple submit and cleanup locks, making driver reentrant.
- Avoid memory mapped status register read on every interrupt.
- Improve locking during device attach/detach.
- Remove some no longer used variables.
Reviewed by: cem
MFC after: 1 week
Sponsored by: iXsystems, Inc.
Differential Revision: https://reviews.freebsd.org/D19231
Its a hack, we can't know/list all DMA engines, but this covers all
I/OAT of Xeon E5/E7 at least from Sandy Bridge till Skylake I saw.
MFC after: 1 week
Sponsored by: iXsystems, Inc.
is acceptable in the congestion avoidance phase, but not during slow start.
The MTU is is also not taken into account.
Use a method instead, which is based on exponential growth working also in
slow start and being independent from the MTU.
This is joint work with rrs@.
Reviewed by: rrs@, Richard Scheffenegger
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D18375
When TCP_REASS_LOGGING is defined, a NULL pointer dereference would happen,
if user data was received during the TCP handshake and BB logging is used.
A KASSERT is also added to detect tcp_reass() calls with illegal parameter
combinations.
Reported by: bz@
Reviewed by: rrs@
MFC after: 3 days
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D19254
will be committed later.
The "sc" emulator has the advantages of full support for cons25 and running
about 8 times faster than teken (for writing to the frame buffer).
The "dumb" emulator has the advantage of being simple.
Runtime choice of the emulator is good, but compile time choice is bad.
On systems with non-default DFLTPHYS and/or MAXBSIZE, FUSE would attempt to
use a buf cache block size in excess of permitted size. This did not affect
most configurations, since DFLTPHYS and MAXBSIZE both default to 64kB.
The issue was discovered and reported using a custom kernel with a DFLTPHYS
of 512kB.
PR: 230260 (comment #9)
Reported by: ken@
MFC after: π/𝑒 weeks
We've got some cases where the other end of gssd's AF_LOCAL socket gets
closed, resulting in an error (and SIGPIPE) when it tries to do I/O to it.
Closing without cleaning up means the next time nfsd starts up, it hangs,
unkillably; this allows gssd to handle that particular error.
* Limit the retry cound in gssd_syscall to 5.
The default is INT_MAX, which effectively means forever. And it's an
uninterruptable RPC call, so it will never stop.
The two changes mitigate the problem.
Reviewed by: macklem
MFC after: 2 weeks
Sponsored by: iXsystems Inc.
Differential Revision: https://reviews.freebsd.org/D19153
Without this the physical memory will not be returned to the kernel.
While here call vm_object_reference on the object when mmapping the buffer.
This removed the need for buggy tracking of if it has been mapped or not.
This fixes issues where kcov could use all the system memory.
Reported by: tuexen
Reviewed by: kib
Sponsored by: DARPA, AFTL
Differential Revision: https://reviews.freebsd.org/D19252
This removes the need to allocate a buffer to hold the vm_page_t objects
at the cost of extra IPIs on some architectures.
Reviewed by: kib
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D19252
- debugfs consumers expect to be able to export names more than 48 characters
- debugfs consumers expect to be able to hold locks across calls and are able
to handle allocation failures
Reviewed by: hps@
MFC after: 1 week
Sponsored by: iX Systems
Differential Revision: https://reviews.freebsd.org/D19256
debugfs expects to do non-sleepable allocations
Reviewed by: hps@
MFC after: 1 week
Sponsored by: iX Systems
Differential Revision: https://reviews.freebsd.org/D19259
1 second as allowed by RFC 6298.
Reviewed by: kbowling@, Richard Scheffenegger
Sponsored by: Netflix, Inc.
Differential Revision: https://reviews.freebsd.org/D18941
Skylake Xeons.
See SDM rev. 68 Vol 3 4.6.2 Protection Keys and the description of the
RDPKRU and WRPKRU instructions.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
The data structure implements non-intersecting intervals over the [0,
UINT64_MAX] range, and supports fast insert, predicated clearing of
subrange, and lookup of an interval containing the specified address.
Internally it is a pctrie over the interval start addresses.
Implementation provides additional guarantees over the structure state
in case of memory allocation failures.
Reviewed by: markj
Tested by: pho
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D18893
Take a pass through fixing some of the most egregious whitespace issues in
fs/fuse. Also fix some style(9) warts while here. Not 100% cleaned up, but
somewhat less painful to look at and edit.
No functional change.
idle_td is dereferenced without thread-locking it to make its contents is
invariant, and was accessed without telling the compiler that its contents
is invariant. Some compilers optimized accesses to the supposedly invariant
contents by moving the critical checks for changes outside of the loop that
waits for changes. Fix this using atomic ops.
This bug only showed up for the following configuration: a Turion2
system, amd64 kernels, compiled by gcc, and SCHED_4BSD. clang fails
to do the optimization with all CFLAGS that I tried, because it doesn't
fully optimize the '__asm __volatile' for cpu_spinwait() although this
asm has no memory clobber. gcc only does the optimization with most
CFLAGS. I mostly used -Os with all compilers. i386 works because gcc
-m32 -Os only moves 1 or the 2 accesses outside of the loop.
Non-Turion2 systems and SCHED_ULE worked due to different timing (when
all APs start before the BP checks them outside of the loop).
Reviewed by: kib
The flag for the driver capability of supporting the fix is independent
of the flag for cons25 mode so that it can be managed independently, but
I forget to preserve it when resetting the terminal.
