handlers can be greatly simplified. All the previous double
cycling and complex locking was added to avoid these functions
holding global PCB locks for extended period of time, preventing
addition of new entries.
in the network epoch, we can greatly simplify synchronization.
Remove all unneccesary epoch enters hidden under INP_INFO_RLOCK macro.
Remove some unneccesary assertions and convert necessary ones into the
NET_EPOCH_ASSERT macro.
x86 stack_save_td_running() can work safely only if IPI_TRACE is a
non-maskable interrupt. But at the moment FreeBSD/Xen does not provide
support for the NMI delivery mode. So, mark the functionality as
unsupported similarly to other platforms without NMI.
Maybe there is a way to provide a Xen-specific working
stack_save_td_running(), but I couldn't figure it out.
MFC after: 3 weeks
Sponsored by: Panzura
locking in udp_output() and udp6_output().
First, we select if we need read or write lock in PCB itself, we take
the lock and enter network epoch. Then, we proceed for the rest of
the function. In case if we need to modify PCB hash, we would take
write lock on it for a short piece of code.
We could exit the epoch before allocating an mbuf, but with this
patch we are keeping it all the way into ip_output()/ip6_output().
Today this creates an epoch recursion, since ip_output() enters epoch
itself. However, once all protocols are reviewed, ip_output() and
ip6_output() would require epoch instead of entering it.
Note: I'm not 100% sure that in udp6_output() the epoch is required.
We don't do PCB hash lookup for a bound socket. And all branches of
in6_select_src() don't require epoch, at least they lack assertions.
Today inet6 address list is protected by rmlock, although it is CKLIST.
AFAIU, the future plan is to protect it by network epoch. That would
require epoch in in6_select_src(). Anyway, in future ip6_output()
would require epoch, udp6_output() would need to enter it.
we lookup PCBs. Thus, do not enter epoch recursively in
in_pcblookup_hash() and in6_pcblookup_hash(). Same applies to
tcp_ctlinput() and tcp6_ctlinput().
This leaves several sysctl(9) handlers that return PCB credentials
unprotected. Add epoch enter/exit to all of them.
Differential Revision: https://reviews.freebsd.org/D22197
- amd_intr() does not account for the offset (0x200) in the counter
MSR address and ends up accessing invalid regions while reading
counter value after the 4th counter (0xC001000[8,9,..]) and
erroneously updates the counter values for counters [1-4].
- amd_intr() should only check core pmcs for interrupts since
other types of pmcs (L3,DF) cannot generate interrupts.
- fix pmc NMI's being ignored due to NMI latency on newer AMD processors
Note that this fixes a kernel panic due to GPFs accessing MSRs on
higher core count AMD cpus (seen on both Rome 7502P, and
Threadripper 2990WX 32-core CPUs)
Discussed with: markj
Submitted by: Shreyank Amartya
Differential Revision: https://reviews.freebsd.org/D21553
[RISCV] Add Custom Parser for Atomic Memory Operands
Summary:
GCC Accepts both (reg) and 0(reg) for atomic instruction memory
operands. These instructions do not allow for an offset in their
encoding, so in the latter case, the 0 is silently dropped.
Due to how we have structured the RISCVAsmParser, the easiest way to
add support for parsing this offset is to add a custom AsmOperand and
parser. This parser drops all the parens, and just keeps the
register.
This commit also adds a custom printer for these operands, which
matches the GCC canonical printer, printing both `(a0)` and `0(a0)`
as `(a0)`.
Reviewers: asb, lewis-revill
Reviewed By: asb
Subscribers: s.egerton, hiraditya, rbar, johnrusso, simoncook,
apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay,
zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o,
rkruppe, jfb, PkmX, jocewei, psnobl, benna, Jim, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65205
llvm-svn: 367553
Merge commit f596f4507 from llvm git (by Sam Elliott):
[RISCV] Add FreeBSD targets
Reviewers: asb
Reviewed By: asb
Subscribers: simoncook, s.egerton, lenary, psnobl, benna, mhorne,
emaste, kito-cheng, shiva0217, rogfer01, rkruppe, cfe-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D57795
Patch by James Clarke (jrtc27)
llvm-svn: 367557
Merge commit f596f4507 from llvm git (by Hsiangkai Wang):
[DebugInfo] Generate fixups as emitting DWARF .debug_frame/.eh_frame.
It is necessary to generate fixups in .debug_frame or .eh_frame as
relaxation is enabled due to the address delta may be changed after
relaxation.
There is an opcode with 6-bits data in debug frame encoding. So, we
also need 6-bits fixup types.
Differential Revision: https://reviews.llvm.org/D58335
llvm-svn: 366524
Merge commit f596f4507 from llvm git (by Hsiangkai Wang):
[DebugInfo] Some fields do not need relocations even relax is enabled.
In debug frame information, some fields, e.g., Length in CIE/FDE and
Offset in FDE are attributes to describe the structure of CIE/FDE.
They are not related to the relaxed code. However, these attributes
are symbol differences. So, in current design, these attributes will
be filled as zero and LLVM generates relocations for them.
We only need to generate relocations for symbols in executable
sections. So, if the symbols are not located in executable sections,
we still evaluate their values under relaxation.
Differential Revision: https://reviews.llvm.org/D61584
llvm-svn: 366531
Merge commit f596f4507 from llvm git (by Alex Bradbury):
[RISCV] Don't force absolute FK_Data_X fixups to relocs
The current behavior of shouldForceRelocation forces relocations for
the majority of fixups when relaxation is enabled. This makes sense
for fixups which incorporate symbols but is unnecessary for simple
data fixups where the fixup target is already resolved to an absolute
value.
Differential Revision: https://reviews.llvm.org/D63404
Patch by Edward Jones.
llvm-svn: 369257
Merge commit f596f4507 from llvm git (by Alex Bradbury):
[RISCV] Implement getExprForFDESymbol to ensure RISCV_32_PCREL is
used for the FDE location
Follow binutils in using RISCV_32_PCREL for the FDE initial location.
As explained in the relevant binutils commit
<a6cbf936e3>,
the ADD/SUB pair of relocations is problematic in the presence of
linker relaxation.
This patch has the same end goal as D64715 but includes test changes
and avoids adding a new global VariantKind to MCExpr.h (preferring
RISCVMCExpr VKs like the rest of the RISC-V backend).
Differential Revision: https://reviews.llvm.org/D66419
llvm-svn: 369375
This series of merges will permit riscv64 kernels and riscv64sf worlds
to build with clang instead of gcc (but still using the bfd linker).
Requested by: jhb
Obtained from: https://github.com/freebsd/freebsd/compare/master...bsdjhb:riscv_clang
MFC after: 1 month
X-MFC-With: r353358
GCC 4.2.1 is being removed before FreeBSD 13, as are some other
components required by FreeBSD/sparc64. Contemporary GCC does not build
and there is currently no indication that anyone is going to address
these issues.
PR: 228919, 233405, 236839, 239851
These files already have 'device' lines that they require; adding a
dependency on SOC_* options is an extra restriction that adds extra
verbosity when future supported Broadcom-based SOC will also feature the
same compatible device.
Users wishing to not compile these devices in should remove the 'device'
lines from their config.
In preparation for another change factor out various variable cleanups.
These mainly include:
(1) do not assign values to variables during declaration: this makes
the code more readable and does allow for better grouping of
variable declarations,
(2) do not assign values to variables before need; e.g., if a variable
is only used in the 2nd half of a function and we have multiple
return paths before that, then do not set it before it is needed, and
(3) try to avoid assigning the same value multiple times.
MFC after: 3 weeks
Sponsored by: Netflix
Before the page busy code was converted to make direct use of
sleepqueues, this was handled by _sleep().
Reported by: glebius
Reviewed by: kib
Sponsored by: The FreeBSD Foundation
[libc++] Add `__truncating_cast` for safely casting float types to
integers
This is needed anytime we need to clamp an arbitrary floating point
value to an integer type.
Thanks to Eric Fiselier for the patch.
Differential Revision: https://reviews.llvm.org/D66836
llvm-svn: 370891
Merge commit b92deded8 from llvm git (by Louis Dionne):
[libc++] Move __clamp_to_integral to <cmath>, and harden against
min()/max() macros
llvm-svn: 370900
Merge commit 0ec6a4882 from llvm git (by Louis Dionne):
[libc++] Fix potential OOB in poisson_distribution
See details in the original Chromium bug report:
https://bugs.chromium.org/p/chromium/issues/detail?id=994957
Together, these fix a security issue in libc++'s implementation of
std::poisson_distribution, which can be exploited to read data which is
out of bounds.
Note there are no programs in the FreeBSD base system that use
std::poisson_distribution, so this is only a possible issue for ports
and external programs which have been built against libc++. Therefore,
I am bumping __FreeBSD_version for the benefit of our port maintainers.
Requested by: emaste
Security: potential OOB read
MFC after: 3 days
These are direct copies of the 32 bit functions, adjusted ad needed.
While here fix atomic_fcmpset_16 to use the valid load and store exclusive
instructions.
Sponsored by: DARPA, AFRL
With the -0 option added to ENV(1), some ports will no longer require genv
from sysutils/coreutils.
Reviewed by: kevans (prior version), swills
Approved by: bcr (manpages), imp
Differential Revision: https://reviews.freebsd.org/D22230
Alter bsd.compat.mk to set MACHINE and MACHINE_ARCH when included
directly so MD paths in Makefiles work. In the process centralize
setting them in LIBCOMPATWMAKEENV.
Alter .PATH and CFLAGS settings in work when the Makefile is included.
While here only support LIB32 on supported platforms rather than always
enabling it and requiring users of MK_LIB32 to filter based
TARGET/MACHINE_ARCH.
The net effect of this change is to make Makefile.libcompat only build
compatability libraries.
Reviewed by: imp, kib
Obtained from: CheriBSD (conceptually)
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D22251
In the cases where Linux returns an error (e.g. passing in an undefined
flag) there's no need for us to emit a message. (The target of this
message is a developer working on the linuxulatorm, not the author of
presumably broken Linux software).
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D21606
Previously the watchdog timeout message was appended to the last entry
in the "Waiting for PIDS" list, resulting in a message like
Waiting for PIDS: 31299 31296 90201 9020090 second watchdog timeout
expired. Shutdown terminated.
Print a newline to separate the watchdog timeout message. Also perform
the kill before logging or echoing the message.
PR: 241072
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
interface has changed.
During vlan reconfiguration without destroying interface, it is possible,
that parent interface will be changed. This usually means, that link
layer address of vlan will be different. Therefore we need to update all
associated with vlan's addresses permanent llentries - NDP for IPv6
addresses, and ARP for IPv4 addresses. This is done via lladdr_task
execution. To avoid extra work, before execution do the check, that L2
address is different.
No objection from: #network
Obtained from: Yandex LLC
MFC after: 1 week
Sponsored by: Yandex LLC
Differential Revision: https://reviews.freebsd.org/D22243
This change is based on
r354380 8899 zpool list property documentation doesn't match actual behaviour
There is no "used" pool property, "alloc" is actually spelled
"allocated".
MFC after: 5 days
illumos/illumos-gate@9c2acf00e29c2acf00e2https://www.illumos.org/issues/10554
During the port of MMP (illumos bug 10499) from ZoL, I found this
earlier ZoL project is a prerequisite. Here is the original
description. This addition will enable us to sync an open TXG to the
main pool on demand. The functionality is similar to 'sync(2)' but
'zpool sync' will return when data has hit the main storage instead of
potentially just the ZIL as is the case with the 'sync(2)' cmd.
Portions contributed by: Jerry Jelinek <jerry.jelinek@joyent.com>
Author: Alek Pinchuk <apinchuk@datto.com>
MFC after: 3 weeks
Relnotes: possibly
UEFI 1.10 on macs does not seem to provide devpath to name translation,
provide our own (limited) version, so we can get information about commmon
devices.
MFC after: 1 week
[x86] avoid crashing when splitting AVX stores with non-simple type
(PR43916)
The store splitting transform was assuming a simple type (MVT), but
that's not necessarily the case as shown in the test.
This should fix 'Assertion failed: (isSimple() && "Expected a
SimpleValueType!")' when building the security/openssl111 port targeting
a CPU that supports AVX, but not AVX2, such as sandybridge.
PR: 241747
MFC after: 1 month
X-MFC-With: r353358
- move from "oxtradoc" to RST/Sphinx documentation
- new "csv" encoder, which allows path and leaf lists
- address warnings from PVS-Stdio tool
- add "xolint" detected errors to the documentation
