and `maninstall' targets. This fixes the issue where each subdir
was descended into twice during "make all", and also resurrects
the standardization of `maninstall'.
Urged by: bde
PR: 37796
Submitted by: drs@rucus.ru.ac.za
MFC after: 1 week
Note, I don't usually look after pppd (just ppp), so I haven't
removed the ftp and ingres users as I guess they're there for
a reason....
Move the code that I have not yet finished documenting into the
`IMPLEMENTATION NOTES' section.
Sponsored by: DARPA, NAI Labs
Obtained from: TrustedBSD Project
o Don't ever refer to ad-hoc mode in the raw. Instead, refer to it as
demo ad-hoc mode or lucent legacy demo ad-hoc or some variation on this
theme.
o Talk about point-to-point modes rather than ad-hoc modes. Use ibss where
appropriate.
o Fix type IBBS -> IBSS
for VOP_GETATTR() and VOP_SETATTR(), reference VOP_NULL() to suggest
clearing all of *vap with it before setting specific values. Cross
reference VFS(9). Indicate that failure modes are possible from
VOP_GETATTR() and that an errno value is returned.
Submitted by: Hiten Pandya <hiten@uk.FreeBSD.org>
o go ahead and document ibss-master and ibss modes, since there are
patches in the pipeline to support them.
o Note that they aren't implemented yet.
o Note that different regulatory domains have different default
channels.
o Note that Lucent cards prior to firmware 6.0.4 do not support
ibss mode, and only support the older demo ad-hoc mode.
o Note that PRISM2 chipsets do not support WDS mode of operation
(the mysterious -p 2 option).
Change date to today.
Add socket low power WLAN CF card
Add SMC 2602W which I use all the time
Comment out the create-ibss example. FreeBSD doesn't yet have that
media option. Also change it to master-ibss since that's what OpenBSD
really uses (and that is a change in their man page too)
however I'm adding the Dlink DWL520 as supported from OpenBSD. Also
adding Dlink DWL650 since I have one in my hot little hands and it
works great.
# I suspect that OpenBSD needs this too :-)
heavily on OpenBSD's wi man page, with OpenBSDisms replaced by
FreeBSDisms. I also added a note about where the man page came from.
I hope that I've not broken anything that ru cleaned up. We now run
this through tbl, but that appears to be automatic.
Obtained From: OpenBSD
in progress, and should not have been committed in revision 1.114.
This broke gnu/usr.bin/binutils/strip and usr.bin/strip makefiles;
they were now attempting to install and strip "strip" from objdir.
Pointed out by: bde
This has nothing to do with PR misc/37516.
Do not install games and profiled libraries to the ${CHROOTDIR}
with the initial installworld.
Eliminate the need in the second installworld. For that, make sure
_everything_ is built in the "world" environment, using the right
tool chain.
Added SUBDIR_OVERRIDE helper stuff to Makefile.inc1. Split the
buildworld process into stages, and skip some stages when
SUBDIR_OVERRIDE is set (used to build crypto, krb4, and krb5
dists).
Added NO_MAKEDB_RUN knob to Makefile.inc1 to avoid running
makewhatis(1) at the end of installworld (used when making crypto,
krb4, and krb5 dists).
In release/scripts/doFS.sh, ensure that the correct boot blocks are
used.
Moved the creation of the "crypto" dist from release.5 to
release.2.
In release.3 and doMFSKERN, build kernels in the "world"
environment. KERNELS now means "additional" kernels, GENERIC is
always built.
Ensure we build crunched binaries in the "world" environment.
Obfuscate release/Makefile some more (WMAKEENV) to achieve this.
Inline createBOOTMFS target.
Use already built GENERIC kernel modules to augment mfsfd's
/stand/modules. GC doMODULES as such.
Assorted fixes:
Get rid of the "afterdistribute" target by moving the single use
of it from sys/Makefile to etc/Makefile's "distribute".
Makefile.inc1: apparently "etc" no longer needs to be last for
"distribute" to succeed.
gnu/usr.bin/perl/library/Makefile.inc: do not override the
"install" and "distribute" targets, do it the "canonical" way.
release/scripts/{man,cat}pages-make.sh: make sure Perl manpages and
catpages appear in the right dists. Note that because Perl does
not respect the MANBUILDCAT (and NOMAN), this results in a loss of
/usr/share/perl/man/cat* empty directories. This will be fixed
soon.
Turn MAKE_KERBEROS4 into a plain boolean variable (if it is set it
means "make KerberosIV"), as documented in the make.conf(5)
manpage. Most of the userland makefiles did not test it for "YES"
anyway.
XXX Should specialized kerberized libpam versions be included into
the krb4 and krb5 dists? (libpam.a would be incorrect anyway if
both krb4 and krb5 dists were choosen.)
Make sure "games" dist is made before "catpages", otherwise games
catpages settle in the wrong dist.
Fast build machine provided by: Igor Kucherenko <kivvy@sunbay.com>
to build kernel and kernel modules so stop supporting them in
bsd.subdir.mk and reimplement them in kern.post.mk and kmod.mk
as special versions of the install and reinstall targets, and
only define them if DEBUG is also defined (when debug versions
are really built).
Prompted by: bde
1. The committer refused to respond to questions over the commit.
2. The servers rlogind, rshd, rexecd were not wrapped.
3. "rcmnds" as an abbreviation gets an order of magnitude less hits on
Google than the much more well known "rcmds".
Ensure all standard targets honor SUBDIR. Now `make obj' descends into
SUBDIRs even if NOOBJ is set (some descendants may still need an object
directory, but we do not have such precedents). Now `make install' in
non-bsd.subdir.mk makefiles runs `afterinstall' target _after_ `install'
in SUBDIRs, like we do in bsd.subdir.mk. Nothing depended on the wrong
order anyway.
Fixed `distribute' targets (except for the bsd.subdir.mk version) so that
they do not depend on _SUBDIR; `distribute' calls `install' which already
depends on _SUBDIR.
De-standardize `maninstall', otherwise manpages would be installed twice.
(To be revised later.)
alternative MTAs. Therefore, always install rc.sendmail, regardless of
NO_SENDMAIL make.conf setting. Users can still set mta_start_script to a
different script.
This commit is after a repo-copy of src/etc/sendmail/rc.sendmail to
src/etc/rc.sendmail.
Noticed by: Calvin NG <calvinng@brel.com>
MFC after: 3 days
bsd.own.mk as of share/mk/sys.mk,v 1.60.
I did not notice this because I tested with DESTDIR=/foo/5.0,
and the "exists(/foo/5.0)" test apparently succeeded.
Reported by: fenner
to use ``.if defined()'' inside bsd.own.mk to test for defines
in individual makefiles. For example, setting DEBUG_FLAGS in
Makefile didn't take the desired effect on the STRIP assignment.
Added bsd.init.mk (like in NetBSD) that handles the inclusion
of ../Makefile.inc and bsd.own.mk from all bsd.*.mk files that
"build something".
Back out bsd.own.mk,v 1.15: moved OBJFORMAT initialization back
to sys.mk (several source tree makefiles want to check it early)
and removed MACHINE_ARCH initialization (it's hard to see from
looking at the commitlogs what the problem was at the time, but
now it serves no purpose).
Prohibit the direct inclusion of bsd.man.mk and bsd.libnames.mk.
Protect bsd.obj.mk from repetitive inclusion. Prohibiting the
direct inclusion of bsd.obj.mk might be a good idea too.
incorrect, however, as Dennis Ritchie states ``Actually the acronym is "block
started by symbol." It was a pseudo-op in FAP (Fortran Assembly Program), an
assembler for the IBM <models> machines. It identified its label and set
aside space for a given number of words.''
PR: 34088
Submitted by: Martin Faxer <gmh003532@brfmasthugget.se>
MFC after: 2 days
the .mc file used for /etc/mail/submit.cf. By default,
/etc/mail/freebsd.submit.mc is installed and used.
Requested by: fenner
Submitted by: ume
MFC after: 1 week
indeed a good change, I shouldn't have made it after testing
with the -DNOCLEAN buildworld. There are far too many users
of this misfeature under sys/boot/. I will reapply the change
after I fix these.
This change has been tested with the clean buildworld.
Make the defined(SRCS) case similar to the !defined(SRCS)
case - only define ${PROG}: ${OBJS} if the ${PROG} target
does not exist. This has only one precedence in the entire
source tree, usr.bin/doscmd, and its Makefile is horribly
broken. I will temporarily unconnect it from build until
I'm working on the fix.
Remove need_resched as it no longer exists.
Cleanup the text for other functions that have changed out from under
their descriptions.
This page needs to be reviewed again after things settle down a bit.
Reviewed by: jhb
To do this you need to have each top-end connected as well.
IP can be routed and other protocols get bridged..
Also useful when bridgeing two networks while merging them as
machines will work with both old and new netmasks. (well mostly).
clientmqueue (submit mail queue).
The new mailq display is only active if both the old
daily_status_mailq_enable is set to "YES" and the new
daily_status_include_submit_mailq is set to "YES" so people who disabled
440.status-mailq won't have any surprises.
Likewise, the new queue run is only active if both the old
daily_queuerun_enable is set to "YES" and the new daily_submit_queuerun
is set to "YES" so people who disabled 500.queuerun won't have any
surprises.
While I am here, remove the [ ! -d /var/spool/mqueue ] checks from
both scripts as the queue directory isn't always /var/spool/mqueue for
the main daemon -- it can be set to anything in the sendmail.cf file.
MFC after: 1 week
have the __FBSDID() macro in <sys/cdefs.h>. Fix this once and for all
for tools that need to be bootstrapped.
PR: bin/36747
MFC after: 3 days
Prodded by: obrien
the .PATH (but not in the ${.OBJDIR}) would result in a leak of
the ${OBJS}: ${SRCS:M*.h} dependency hint.
Spotted by: fixing the broken gnu/usr.bin/cc/cc1obj build
MFC after: 1 day
again."
As an alternative to sendmail_enable=NONE, solve the boot time problem
for non-sendmail users completely by moving all of the sendmail startup
code from /etc/rc to /etc/rc.sendmail. The source for that script will
be kept in src/etc/sendmail/rc.sendmail so make.conf's NO_SENDMAIL will
prevent it from being installed. A new rc.conf variable,
mta_start_script specifies the script to run to start the user's
preferred MTA. For backward compatibility, it will default to
/etc/rc.sendmail. The specified script is called out of /etc/rc after
checking to make sure it exists. A new rc.sendmail.8 man page has also
been added which now houses the sendmail_* variable descriptions
formerly in rc.conf.5.
Use /etc/rc.sendmail in /etc/mail/Makefile to reduce code duplication.
Reviewed by: -current, -stable, obrien, peter, ru
MFC after: 1 week
at boot time.
Instead of rc.conf's sendmail_enable only accepting YES or NO, it can now
also accept NONE. If set to NONE, none of the other sendmail related
startup items will be done.
Remove an extra queue running daemon might be started that wasn't necessary
(it didn't hurt anything but it wasn't needed).
The new logic is:
# MTA
if ${sendmail_enable} == NONE
# Do nothing
else if ${sendmail_enable} == YES
start sendmail with ${sendmail_flags}
else if ${sendmail_submit_enable} == YES
start sendmail with ${sendmail_submit_flags}
else if ${sendmail_outbound_enable} == YES
start sendmail with ${sendmail_outbound_flags}
endif
# MSP Queue Runner
if ${sendmail_enable} != NONE &&
[ -r /etc/mail/submit.cf] && ${sendmail_msp_queue_enable} == YES
start sendmail with ${sendmail_msp_queue_flags}
endif
Discussed with: Thomas Quinot <Thomas.Quinot@Cuivre.FR.EU.ORG>,
Christopher Schulte <schulte+freebsd@nospam.schulte.org>
MFC after: 1 week
Install sys/<arch>/include/pc/*.h to /usr/include/machine/pc/.
PR: docs/29534
Install sys/netatm/*/*.h to /usr/include/netatm/*/.
Don't install compatibility symlinks for <machine/soundcard.h>
and <machine/joystick.h>. Three years is enough to be aware of
the change, and these weren't visible in the SHARED=symlinks
case.
Back out include/Makefile,v 1.160 that was a null change anyway
due to the bug in the path, and we now don't want to install
these headers because they would otherwise be invisible in the
SHARED=symlinks case.
Don't install IPFILTER headers. Userland utilities fetch them
directly, and they were not visible in the SHARED=symlinks case.
Resurrect SHARED=symlinks in Makefile.inc1.
PR: bin/28002
Prodded by: bde
MFC after: 2 weeks
This file contains FreeBSD/Unix lexicon that is used by the system
documentation. It makes a great ispell(1) personal dictionary to
supplement the standard English language dictionary, and can be used
to greatly reduce the number of false positives when spell checking
share/man/*, www/*, or doc/*
Discussed with: ru, obrien
MFC after: 2 weeks
(See commit log for usr.bin/xlint/Makefile,v 1.11 for what was wrong
with enabling build of lint libraries in rev. 1.12.)
This fixes cross-arch compiles (running binaries for a different arch
when generating lint.7 and lint libraries) and cross-branch compiles
(4.x -> 5.0 buildworld should be working again).
"env name=value ... cmd ..." was just a pessimized way of doing
"name=value ... cmd ...". Note that make(1) can't optimize
either of these to an exec of env(1) or "cmd" even if the second
"..." is simple, since it can't tell that the shell metacharacter
in "name=value" is actually handled by env(1).
Use this where we are now using /etc/make.conf.
This allows people to override the current default of always including
/etc/make.conf. Setting __MAKE_CONF to /dev/null disables it
completely, while setting it to something else allows one to override
what is on the system. This can be desirable in situations where a
machine has many users and some of them want different defaults, or
defaults appropriate to cross building to be different than those for
normal building.
Not objected to by: arch@
lint, so this is turned off by default. Setting WANT_LINT will turn
on generation of lint libraries for /usr/libdata/lint/*.ln.
Reviewd by: silence in -audit.
* Document the LOCAL_SCRIPT option.
* Document the NOPORTREADMES option.
* Be more specific in a comment.
* Be more specific about the ftp.1 and cdrom.1 targets.
* Clarify the usage of the CVSROOT variable.
* Clarify the usage of the NODOC variable.
Suggested by: matusita
about the TARGET_ARCH variable. (1)
Add information about the DESTDIR variable.
Add more examples for cross-building.
(1) Submitted by: ru
MFC after: 3 days
