In FreeBSD 11 and later debug.iosize_max_clamp defaults to 0, and the
maximum nbytes count for write(2) is SSIZE_MAX. Update the man page to
document this, and mention the sysctl that can be set to obtain the
previous behaviour.
PR: 196666
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
geom_gettree(3) and geom_deletetree(3) functions provided by libgeom and are
not documented in libgeom(3).
Reviewed by: mav, bjk, allanjude
Approved by: allanjude
Differential Revision: https://reviews.freebsd.org/D12679
Uses the same method as in tools/tools/ifinfo/ifinfo.c
(via net.link.generic sysctl).
Tested with modified wlandebug(8).
Differential Revision: https://reviews.freebsd.org/D12554
posix_fallocate is logically equivalent to writing zero blocks to the
desired file size and there is no reason to prevent calling it in
capability mode. posix_fallocate already checked for the CAP_WRITE
right, so we merely need to list it in capabilities.conf.
Reviewed by: allanjude
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12640
Make armv7 as a new MACHINE_ARCH.
Copy all the places we do armv6 and add armv7 as basically an
alias. clang appears to generate code for armv7 by default. armv7 hard
float isn't supported by the the in-tree gcc, so it hasn't been
updated to have a new default.
Support armv7 as a new valid MACHINE_ARCH (and by extension
TARGET_ARCH).
Add armv7 to the universe build.
Differential Revision: https://reviews.freebsd.org/D12010
On Variant I TLS architectures (aarch64, arm, mips, powerpc, and riscv)
the __libc_allocate_tls function allocates thread local storage memory
with calloc(). It then copies initialization data over the portions with
non-zero initial values. Before this change it would then pointlessly
zero the already zeroed remainder of the storage. Unfortunately the
calculation was wrong and it would zero TLS_TCB_SIZE (2*sizeof(void *))
additional bytes.
In practice, this overflow only matters if the TLS segment is sized such
that calloc() allocates a less than TLS_TCB_SIZE extra memory. Even
then, the likely result will be zeroing part of the next bucket. This
coupled with the impact being confined to Tier II platforms means there
will be no security advisory for this issue.
Reviewed by: kib, dfr
Discussed with: security-officer (delphij)
MFC after: 1 week
Found by: CHERI
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12547
"P" instead of "?" in "procstat -af" output. Note that there are
still a few more DTYPE_* kinds we don't decode yet.
Reported by: rwatson
MFC after: 2 weeks
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D12426
Violators may define _WANT_SOCKET and _WANT_UNPCB respectively and
are not guaranteed for stability of the structures. The violators
list is the the usual one: libprocstat(3) and netstat(1) internally
and lsof in ports.
In struct xunpcb remove the inclusion of kernel structure and add
a bunch of spare fields. The xsocket already has socket not included,
but add there spares as well. Embed xsockbuf into xsocket.
Sort declarations in sys/socketvar.h to separate kernel only from
userland available ones.
PR: 221820 (exp-run)
Fix regression by r318539. The sysutils/pstack uses library libthread_db to
read information about threads state. The function pt_ta_new makes lookup of
several key symbols including _thread_keytable. But r318539 mades this field
static. It causes silent ignore of libthr library by pstack and as result
sysutils/pstack doesn't output any thread information.
This fix changes this field back to non-static.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D11738
Sync libarchive with vendor.
Relevant vendor changes:
PR #905: Support for Zstandard read and write filters
PR #922: Avoid overflow when reading corrupt cpio archive
Issue #935: heap-based buffer overflow in xml_data (CVE-2017-14166)
OSS-Fuzz 2936: Place a limit on the mtree line length
OSS-Fuzz 2394: Ensure that the ZIP AES extension header is large enough
OSS-Fuzz 573: Read off-by-one error in RAR archives (CVE-2017-14502)
MFC after: 1 week
Security: CVE-2017-14166, CVE-2017-14502
Also fix the style of the asprintf(3) call in __collate_load_tables_l().
Both of these lines were modified away from snprintf(3) during the
import from DragonFly/Illumos.
Reviewed by: jilles (briefly over shoulder)
MFC after: 2 weeks
Sponsored by: Dell EMC Isilon
check hash to cylinder groups. If a check hash fails when a cylinder
group is read, no further allocations are attempted in that cylinder
group until it has been fixed by fsck. This avoids a class of
filesystem panics related to corrupted cylinder group maps. The
hash is done using crc32c.
Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily
used in embedded systems with small memories and low-powered processors
which need as light-weight a filesystem as possible.
Specifics of the changes:
sys/sys/buf.h:
Add BX_FSPRIV to reserve a set of eight b_xflags that may be used
by individual filesystems for their own purpose. Their specific
definitions are found in the header files for each filesystem
that uses them. Also add fields to struct buf as noted below.
sys/kern/vfs_bio.c:
It is only necessary to compute a check hash for a cylinder
group when it is actually read from disk. When calling bread,
you do not know whether the buffer was found in the cache or
read. So a new flag (GB_CKHASH) and a pointer to a function to
perform the hash has been added to breadn_flags to say that the
function should be called to calculate a hash if the data has
been read. The check hash is placed in b_ckhash and the B_CKHASH
flag is set to indicate that a read was done and a check hash
calculated. Though a rather elaborate mechanism, it should
also work for check hashing other metadata in the future. A
kernel internal API change was to change breada into a static
fucntion and add flags and a function pointer to a check-hash
function.
sys/ufs/ffs/fs.h:
Add flags for types of check hashes; stored in a new word in the
superblock. Define corresponding BX_ flags for the different types
of check hashes. Add a check hash word in the cylinder group.
sys/ufs/ffs/ffs_alloc.c:
In ffs_getcg do the dance with breadn_flags to get a check hash and
if one is provided, check it.
sys/ufs/ffs/ffs_vfsops.c:
Copy across the BX_FFSTYPES flags in background writes.
Update the check hash when writing out buffers that need them.
sys/ufs/ffs/ffs_snapshot.c:
Recompute check hash when updating snapshot cylinder groups.
sys/libkern/crc32.c:
lib/libufs/Makefile:
lib/libufs/libufs.h:
lib/libufs/cgroup.c:
Include libkern/crc32.c in libufs and use it to compute check
hashes when updating cylinder groups.
Four utilities are affected:
sbin/newfs/mkfs.c:
Add the check hashes when building the cylinder groups.
sbin/fsck_ffs/fsck.h:
sbin/fsck_ffs/fsutil.c:
Verify and update check hashes when checking and writing cylinder groups.
sbin/fsck_ffs/pass5.c:
Offer to add check hashes to existing filesystems.
Precompute check hashes when rebuilding cylinder group
(although this will be done when it is written in fsutil.c
it is necessary to do it early before comparing with the old
cylinder group)
sbin/dumpfs/dumpfs.c
Print out the new check hash flag(s)
sbin/fsdb/Makefile:
Needs to add libufs now used by pass5.c imported from fsck_ffs.
Reviewed by: kib
Tested by: Peter Holm (pho)
Make scan-build happy by casting to 'void *' instead of 'void **'.
Submitted by: pjd@
MFC after: 1 month
Found by: scan-build and cppcheck
Sponsored by: Wheel Systems
Previously we'd have an assertion failure in cap_rights_is_set if
sysdecode_cap_rights is called with an invalid cap_rights_t, so test for
validity first.
PR: 222258
Reviewed by: cem
MFC after: 1 month
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12391
After r308212 Capsicum permits .. lookups in capability mode, as long as
path component traversal does not escape the directory corresponding to
the provided file descriptor.
We should add a description of the vfs.lookup_cap_dotdot and
vfs.lookup_cap_dotdot_nonlocal sysctls, perhaps as a cross-reference to
capsicum(4). I intend to look at that soon.
Reviewed by: bjk, cem, kib
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D12343
Fix allocating more memory for the names (unlikely to be needed, but
still best to get right) to ask for the length the kernel told use we
needed, not the old length of the variable. Mind the proper NUL that
we add in the space we allocate. Free the old name string before we
allcoate a new one to limit what we leak to the last one (free passed
in name for the last one in the list), and detect the last one by rv
!= 0 and errno == ENOENT, rather then just the former to avoid false
positives if errno happens to be ENOENT on entry.
Sponsored by: Netflix
The memory can be leaked if we will have pkt set and will get an error
during tftp_open() processing.
Differential Revision: https://reviews.freebsd.org/D12202
efidp_size will return the size, in bytes, of a EFI device path
structure. This is a convenience wrapper in the same style as the
other linux routines. It's implemented by GetDevicePathSize from EDK2
we already needed for other things.
Sponsored by: Netflix
Avoid dealing with some code that uses type-punned pointers.
See D12210 and D12211 for more background.
Reviewed by: imp
Approved by: markj (mentor)
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D12219
Move tables that were previously in truss over to libsysdecode. truss
output is unchanged, but kdump has been updated to decode these fields.
In addition, sysdecode_sysarch_number() should support all platforms
whereas the old table in truss only supported x86.
the upstream release_50 branch. This corresponds to 5.0.0 rc4.
As of this version, the cad/stepcode port should now compile in a more
reasonable time on i386 (see bug 221836 for more information).
PR: 221836
MFC after: 2 months
X-MFC-with: r321369
o Add File to the mUefiDevicePathLibDevPathFromTextTable table so we
don't include 'File()' in the supposed path name. This happens because
of a possible misfeature in the EDK2 code where any path that's not
recognized is treated as a File() node.
o Convert utf8 input into ucs2 output rather than just copying the
utf8 and hoping for the best (no good comes from that).
o Remove bogus comment about needing to add 1. The dummy array already
is length 1, so that's included in sizeof the struct, so there's no
need to add it.
Sponsored by: Netflix
Device paths encoded into the FILEPATH_DEVICE_PATH are UCS2 not
ASCII/UTF8. Convert to utf8 and print that when printing File
paths. Also, since File may be at the end of a long device path,
output File() around the path so it doesn't just show up as random
nodes that might accidentally match real node paths names and cause
errors.
LLVM's MIPS assembler parser does not understand the GNU as
'.gnu_attribute' keyword. This could be re-enabled if LLVM is updated
in the future. The desired floating point ABI is already described in
the .MIPS.abiflags section.
Reviewed by: emaste
Sponsored by: DARPA / AFRL
