0 milliseconds and 2 seconds inclusivly. Some style fixes while at it.
The USB specification has minimum values and maximum values,
and not only minimum values.
MFC after: 1 week
Sponsored by: Mellanox Technologies // NVIDIA Networking
qoriq_gpio_pin_setflags() locks the device mutex, as does
qoriq_gpio_map_gpios(), causing a recursion on non-recursive lock. This
was missed during testing for 16e549ebe.
PVHv1 was officially removed from Xen in 4.9, so just axe the related
code from FreeBSD.
Note FreeBSD supports PVHv2, which is the replacement for PVHv1.
Sponsored by: Citrix Systems R&D
Reviewed by: kib, Elliott Mitchell
Differential Revision: https://reviews.freebsd.org/D30228
The CTL frontend might have provided a buffer that is smaller than the
FirstBurstLength and thus smaller than the amount of unsolicited data
included in the request PDU. Treat these transfers as an empty
transfer.
Reported by: Jithesh Arakkan @ Chelsio
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29940
A single union ctl_io can be reused across multiple transfers (in
particular by the ramdisk backend). On a reuse, the reservation
pointer would retain its value from the previous transfer tripping an
assertion.
Reported by: Jithesh Arakkan @ Chelsio
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29939
- Switch to allocating the cxgbei version of icl_pdu explicitly
as a separate refcounted object allocated via malloc/free
instead of storing it in the bhs mbuf prior to the bhs.
- Support the icl_conn_pdu_queue_cb() method to set a callback
on a PDU to be invoked when the PDU is freed.
- For ICL_NOCOPY buffers, use an external mbuf to manage the
storage for the buffer via m_extaddref(). Each external mbuf
holds a reference on the associated PDU, so the callback is
invoked once all of the external mbufs have been freed.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29910
- Only allocate 16K jumbo mbufs if the region of data to be
appended is sufficiently large, and use a loop.
- Use m_getm2() to allocate a chain for data less than 16K, or
if m_getjcl() fails.
- Use ENOMEM as the return value instead of '1' if the hook fails due
to a memory allocation error.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29909
A CAM target layer I/O CCB can use a S/G list of virtual address ranges
to describe its data buffer. This change adds zero-copy receive support
for such requests.
Sponsored by: Chelsio Communications
Differential Revision: https://reviews.freebsd.org/D29908
As a result, CPL_FW4_ACK now returns credits for these work requests.
To support this, page pod work requests are now constructed in special
mbufs similar to "raw" mbufs used for NIC TLS in plain TX queues.
These special mbufs are stored in the ulp_pduq and dispatched in order
with PDU work requests.
Sponsored by: Chelsio Communications
Discussed with: np
Differential Revision: https://reviews.freebsd.org/D29904
We shouldn't overwrite capability register. Instead, voltages supported
by the controller have to be read from dts, as the hardware doesn't
report correct values.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30123
Add a missing call to mmc_fdt_parse, without it some dts properties
are not parsed.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30122
Add data specific for SoC, including all necessary quirks.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30121
The hotplug script will be executed only once for each backend,
regardless of the frontend triggering reconnections. Fix blkback to
deal with the hotplug script being executed only once, so that
reconnections don't stall waiting for a hotplug script execution
that will never happen.
As a result of the fix move the initialization of dev_mode, dev_type
and dev_name to the watch callback, as they should be set only once
the first time the backend connects.
This fix is specially relevant for guests wanting to use UEFI OVMF
firmware, because OVMF will use Xen PV block devices and disconnect
afterwards, thus allowing them to be used by the guest OS. Without
this change the guest OS will stall waiting for the block backed to
attach.
Fixes: de0bad0001 ('blkback: add support for hotplug scripts')
MFC after: 1 week
Sponsored by: Citrix Systems R&D
On rk3399 the VOP-little node has a single 'port' property (not a
collection of 'ports' or indexed ports).
Reviewed by: manu
Sponsored by: UKRI
Differential Revision: https://reviews.freebsd.org/D30165
I saw a situation where the driver set CAM_AUTOSNS_VALID on a failed ccb
even though SRB_STATUS_AUTOSENSE_VALID was not set in the status.
The actual sense data remained all zeros.
The problem seems to be that create_storvsc_request() always sets
hv_storvsc_request::sense_info_len, so checking for sense_info_len != 0
is not enough to determine if any auto-sense data is actually available.
Reviewed by: whu, imp
MFC after: 2 weeks
Sponsored by: CyberSecure
Differential Revision: https://reviews.freebsd.org/D30124
Virtio modern has the common data organized in little endian, but
on powerpc64 BE it was reading and writing in the wrong endian.
Submitted by: Leonardo Bianconi <leonardo.bianconi@eldorado.org.br>
Reviewed by: bryanv, alfredo
Sponsored by: Eldorado Research Institute (eldorado.org.br)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D28947
Only LS1046A and LS1028A require the base clk to be divided by 2.
Implement that by moving the divider to a SoC specific data.
This commit fixes base clk setup for the entire SoC family,
including the already suported LS2160A.
Submitted by: Lukasz Hajec <lha@semihalf.com>
Reviewed by: manu
Obtained from: Semihalf
Sponsored by: Alstom Group
Differential Revision: https://reviews.freebsd.org/D30120
Attaching and detaching devices can be heavy-weight and detaching can
sleep waiting for events. For that reason using the system-wide
single-threaded taskqueue_thread is not really appropriate.
There is even a possibility for a deadlock if taskqueue_thread is used
for detaching.
In fact, there is an easy to reproduce deadlock involving nvme, pass
and a sudden removal of an NVMe device.
A pass peripheral would not release a reference on an nvme sim until
pass_shutdown_kqueue() is executed via taskqueue_thread. But the
taskqueue's thread is blocked in nvme_detach() -> ... -> cam_sim_free()
because of the outstanding reference.
MFC after: 10 days
Sponsored by: CyberSecure
Reviewed by: mav, imp
Differential Revision: https://reviews.freebsd.org/D30144
DRIVER_OK status is set after device_attach() succeeds. For now postpone
disk_create to attach_completed() method.
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Reviewed by: grehan
Approved by: lwhsu (mentor)
Differential Revision: https://reviews.freebsd.org/D30049
The _ext event notification includes the address being added/removed and
that gives the driver an easy way to ignore non-IPv6 addresses. Remove
'tom' from the handler's name while here, it was moved out of t4_tom a
long time ago.
MFC after: 1 week
Sponsored by: Chelsio Communications
AIM (adaptive interrupt moderation) was part of BSD11 driver. Upon IFLIB
migration, AIM feature got lost. Re-introducing AIM back into IFLIB
based IXGBE driver.
One caveat is that in BSD11 driver, a queue comprises both Rx and Tx
ring. Starting from BSD12, Rx and Tx have their own queues and rings.
Also, IRQ is now only configured for Rx side. So, when AIM is
re-enabled, we should now consider only Rx stats for configuring EITR
register in contrast to BSD11 where Rx and Tx stats were considered to
manipulate EITR register.
Reviewed by: gallatin, markj
Sponsored by: NetApp, Inc.
MFC after: 2 weeks
Differential Revision: https://reviews.freebsd.org/D27344
Several protocol methods take a sockaddr as input. In some cases the
sockaddr lengths were not being validated, or were validated after some
out-of-bounds accesses could occur. Add requisite checking to various
protocol entry points, and convert some existing checks to assertions
where appropriate.
Reported by: syzkaller+KASAN
Reviewed by: tuexen, melifaro
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D29519
Add PCI IDs for Intel Apollo Lake Series HSUARTs:
# pciconf -ll
drv selector class rev hdr vendor device subven subdev
uart0@pci0:0:24:0: 118000 0b 00 8086 5abc 8086 7270
uart1@pci0:0:24:1: 118000 0b 00 8086 5abe 8086 7270
uart2@pci0:0:24:2: 118000 0b 00 8086 5ac0 8086 7270
uart3@pci0:0:24:3: 118000 0b 00 8086 5aee 8086 7270
NB (Intel Document Number 336256-004US):
1. The E3900 and A3900 Series Processors support four LPSS_UART ports,
while the N- and J- Series Processors support only LPSS_UART [2:1]
ports.
2. The LPSS_UART1 port is dedicated for discrete Global Navigation
Satellite System (GNSS). This port can be used for generic UART
functionality if GNSS is not used.
3. The LPSS_UART2 port is dedicated for host OS debug.
4. The LPSS_UART0 and LPSS_UART3 ports are for generic UART functionality.
5. Only UART [1:0] ports support DMA.
PR: 255556
Submitted by: Jose Luis Duran <jlduran@gmail.com>
MFC after: 1 week
It is defined as a uint64_t in the UEFI spec. As it's not used as a
pointer by the kernel follow this and define it as the same in the
kernel.
Reviewed by: kib, manu, imp
Sponsored by: Innovate UK
Differential Revision: https://reviews.freebsd.org/D29759
The original implementation only supports getting the address from legacy
BIOS (by searching for the SMBIOS_SIG pattern in a fixed address space).
Try to get the SMBIOS table from EFI through efirt (EFI Runtime Services)
firstly. Continue to search in the legacy BIOS if a NULL address is
returned from EFI.
By this way the ipmi function supports both legacy BIOS and UEFI systems.
Reviewed by: dab, vangyzen
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Differential Revision: https://reviews.freebsd.org/D30007
There is no need to panic in if_transmit if the checksums requested are
inconsistent with the frame being transmitted. This typically indicates
that the kernel and driver were built with different INET/INET6 options,
or there is some other kernel bug. The driver should just throw away
the requests that it doesn't understand and move on.
MFC after: 1 week
Sponsored by: Chelsio Communications
This is just clerical work to ease bug triage and may be used to set
expectations around the ability for anyone in the community to perform
testing and development on older parts.
Approved by: erj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D29876
Add suspend/resume callbacks to the driver and a live reset built around
them. This commit covers the basic NIC and future commits will expand
this functionality to other stateful parts of the chip. Suspend and
resume operate on the chip (the t?nex nexus device) and affect all its
ports. It is not possible to suspend/resume or reset individual ports.
All these operations can be performed on a running NIC. A reset will
look like a link bounce to the networking stack.
Here are some ways to exercise this functionality:
/* Manual suspend and resume. */
# devctl suspend t6nex0
# devctl resume t6nex0
/* Manual reset. */
# devctl reset t6nex0
/* Manual reset with driver sysctl. */
# sysctl dev.t6nex.0.reset=1
/* Automatic adapter reset on any fatal error. */
# hw.cxgbe.reset_on_fatal_err=1
Suspend disables the adapter (DMA, interrupts, and the port PHYs) and
marks the hardware as unavailable to the driver. All ifnets associated
with the adapter are still visible to the kernel but operations that
require hardware interaction will fail with ENXIO. All ifnets report
link-down while the adapter is suspended.
Resume will reattach to the card, reconfigure it as before, and recreate
the queues servicing the existing ifnets. The ifnets are able to send
and receive traffic as soon as the link comes back up.
Reset is roughly the same as a suspend and a resume with at least one of
these events in between: D0->D3Hot->D0, FLR, PCIe link retrain.
MFC after: 1 month
Relnotes: yes
Sponsored by: Chelsio Communications
* Fix 82574 Link Status Changes, carrying the OTHER mask bit around as
needed.
* Move igb-class LSC re-arming out of FAST back into the handler.
* Clarify spurious/other interrupt re-arms in FAST.
In MSI-X mode, 82574 and igb-class devices use an interrupt filter to
handle Link Status Changes. We want to do LSC re-arms in the handler
to take advantage of autoclear (EIAC) single shot behavior.
82574 uses 'Other' in ICR and IMS for LSC interrupt types when in MSI-X
mode, so we need to set and re-arm the 'Other' bit during attach and
after ICR reads in the FAST handler if not an LSC or after handling on
LSC due to autoclearing.
This work was primarily done to address the referenced PR, but inspired
some clarification and improvement for igb-class devices once the
intentions of previous bug fix attempts became clearer.
PR: 211219
Reported by: Alexey <aserp3@gmail.com>
Tested by: kbowling (I210 lagg), markj (I210)
Approved by: markj
MFC after: 1 month
Differential Revision: https://reviews.freebsd.org/D29943
A lot more generic cam related things are done in mmc_sim so this simplify
the driver a lot.
Differential Revision: https://reviews.freebsd.org/D27487
Reviewed by: kibab
The driver uses both software resources (locks, callouts, memory for
descriptors and for bookkeeping, sysctls, etc.) and hardware resources
(VIs, DMA queues, TCAM entries, etc.) to operate the NIC. This commit
splits the single *_ALLOCATED flag used to track all these resources
into separate *_SW_ALLOCATED and *_HW_ALLOCATED flags.
This is the simplified pseudocode that now applies to most queues (foo
can be ctrlq/txq/rxq/ofld_txq/ofld_rxq):
/* Idempotent */
alloc_foo
{
if (!SW_ALLOCATED)
init_iq/init_eq/init_fl no-fail sw init
alloc_iq_fl/alloc_eq/alloc_wrq may-fail sw alloc
add_foo_sysctls, etc. no-fail post-alloc items
if (!HW_ALLOCATED)
alloc_iq_fl_hwq/alloc_eq_hwq hw resource allocation
}
/* Idempotent */
free_foo
{
if (!HW_ALLOCATED)
free_iq_fl_hwq/free_eq_hwq release hw resources
if (!SW_ALLOCATED)
free_iq_fl/free_eq/free_wrq release sw resources
}
The routines that take the driver to FULL_INIT_DONE and VI_INIT_DONE and
back are now all idempotent. The quiesce routines pay attention to the
HW_ALLOCATED flag and will not wait on the hardware for pidx/cidx
updates and other completions if this flag is not set.
MFC after: 1 month
Sponsored by: Chelsio Communications
This is just clerical work to ease bug triage and may be used to set
expectations around the ability for anyone in the community to perform
testing and development on older parts (this driver covers over 20 years
of silicon)
Reviewed by: erj
Approved by: markj
Sponsored by: Pink Floyd - Any Colour You Like (in kind)
Differential Revision: https://reviews.freebsd.org/D29872
Allow new enclosure to replace previously existing one if there is
no completely unused table entry, same as it is done for devices.
If we can not process DPM due to corruption -- wipe it and restart
from scratch. Otherwise I don't see a way to recover persistence if
something go wrong and there is no BIOS to recover it for us.
Together this solves a problem that appeared when 9300-8i firmware
update to 16.00.10.00 somehow switched its mapping mode from Device
Persistence to Enclosure/Slot without wiping the DPM table. It made
HBA completely unusable, since overflowed and conflicting mapping
table was unable to map any of enclosures and so devices.
Also while there make some enclosure mapping errors more informative.
MFC after: 1 month
Sponsored by: iXsystems, Inc.
3e7bae0821 turns the BUS_READ_IVAR() failure from a warning into a
KASSERT. For certain PCI audio devices such like snd_csa(4) and
snd_emu10kx(4), the ac97_create() keeps the device handler generated
by device_add_child(pci_dev, "pcm"), which is not really a PCI device
handler. This in turn causes the subsequent pci_get_subdevice()
inside ac97_initmixer() triggering a panic.
This patch tries to put a bandaid for the aforementioned pcm device
children such that they can use the correct PCI handler(from parent)
to avoid a KASSERT panic in the INVARIANTS kernel.
Tested with: snd_csa(4), snd_ich(4), snd_emu10kx(4)
Reviewed by: imp
MFC after: 1 month
