Commit Graph

1389 Commits

Author SHA1 Message Date
David Schultz
2ee7b1d4ae Add C11 macros describing subnormal numbers to float.h.
Reviewed by:	bde
2012-01-23 06:36:41 +00:00
Pawel Jakub Dawidek
9b9a01792d TDF_* flags should be used with td_flags field and TDP_* flags should be used
with td_pflags field. Correct two places where it was not the case.

Discussed with:	kib
MFC after:	1 week
2012-01-22 11:01:36 +00:00
David Schultz
9fa03ecd01 Add parentheses where required. Without them, `sizeof LDBL_MAX'
is a syntax error and shouldn't be, while `1 FLT_ROUNDS' isn't a
syntax error and should be.  Thanks to bde for the examples.
2012-01-20 06:51:41 +00:00
David Schultz
cb659153f9 Fix the value of float_t to match what is implied by FLT_EVAL_METHOD. 2012-01-16 20:17:51 +00:00
David Schultz
9c955049b4 Fix the definition of FLT_EVAL_METHOD and some minor bugs. 2012-01-16 05:23:13 +00:00
David Schultz
86d131a04a Implement FLT_ROUNDS for arm. Some (all?) arm FPUs lack support for
dynamic rounding modes, but FPUless chips that use softfloat can support it
because everything is emulated anyway.  (We presently have incomplete
support for hardware FPUs.)

Submitted by:	Ian Lepore
2012-01-16 04:08:29 +00:00
Ulrich Spörlein
004a39cd57 Remove spurious 8bit chars, turning files into plain ASCII. 2012-01-15 13:23:33 +00:00
Adrian Chadd
4573d52b08 Add missing options so modules build/load correctly. 2012-01-05 20:18:01 +00:00
Marius Strobl
7ccccd843a Fix header pollution, possibly unbreaking the build of cfi_bus_ixp4xx.c
as part of cfi.ko.
2011-12-31 15:53:34 +00:00
Rafal Jaworowski
68f8dc2950 ARM pmap fixes:
- Write Buffers have to be drained after write to Page Table even if caches
  are in write-through mode.

- Make sure to sync PTE in pmap_zero_page_generic().

Submitted by:	Michal Mazur
Reviewed by:	cognet
Obtained from:	Semihalf
MFC after:	1 month
2011-12-15 12:14:15 +00:00
Alan Cox
3b03ca3bbe Eliminate vestiges of page coloring. 2011-12-15 05:07:16 +00:00
Rafal Jaworowski
dd63f0ab98 Make *intr{cnt,names} on ARM reside in data section, similar to other arches.
sintrnames and sintrcnt are initialized with non-zero values, which were
discarded by the .bss directive, so consumers like "vmstat -i" were not
getting correct data.

Submitted by:	Lukasz Plachno
Obtained from:	Semihalf
MFC after:	1 month
2011-12-14 17:12:59 +00:00
Hans Petter Selasky
2e14174893 Implement better support for USB controller suspend and resume.
This patch should remove the need for kldunload of USB
controller drivers at suspend and kldload of USB controller
drivers at resume.

This patch also fixes some build issues in avr32dci.c

MFC after:	2 weeks
2011-12-14 00:28:54 +00:00
Ed Schouten
53627e400f Replace __signed by signed.
The signed keyword is an integral part of the C syntax. There's no need
to use __signed.
2011-12-13 13:38:03 +00:00
Jayachandran C.
07042bef45 Fix OF_finddevice error return value in case of FDT.
According to the open firmware standard, finddevice call has to return
a phandle with value of -1 in case of error.

This commit is to:
- Fix the FDT implementation of this interface (ofw_fdt_finddevice) to
  return (phandle_t)-1 in case of error, instead of 0 as it does now.
- Fix up the callers of OF_finddevice() to compare the return value with
  -1 instead of 0 to check for errors.
- Since phandle_t is unsigned, the return value of OF_finddevice should
  be checked with '== -1' rather than '<= 0' or '> 0', fix up these cases
  as well.

Reported by:	nwhitehorn

Reviewed by:	raj
Approved by:	raj, nwhitehorn
2011-12-02 15:24:39 +00:00
Hans Petter Selasky
3b12bdb58f Rename device_delete_all_children() into device_delete_children().
Suggested by:	jhb @ and marius @
MFC after:	1 week
2011-11-22 21:56:55 +00:00
Marius Strobl
4b7ec27007 - There's no need to overwrite the default device method with the default
one. Interestingly, these are actually the default for quite some time
  (bus_generic_driver_added(9) since r52045 and bus_generic_print_child(9)
  since r52045) but even recently added device drivers do this unnecessarily.
  Discussed with: jhb, marcel
- While at it, use DEVMETHOD_END.
  Discussed with: jhb
- Also while at it, use __FBSDID.
2011-11-22 21:28:20 +00:00
Rafal Jaworowski
8817e1bffe Initial version of cesa(4) driver for Marvell crypto engine and security
accelerator.

The following algorithms and schemes are supported:
 - 3DES, AES, DES
 - MD5, SHA1

Obtained from:	Semihalf
Written by:	Piotr Ziecik
2011-11-19 16:30:06 +00:00
Hans Petter Selasky
11bcf702f4 Move the device_delete_all_children() function from usb_util.c
to kern/subr_bus.c. Simplify this function so that it no longer
depends on malloc() to execute. Identify a few other places where
it makes sense to use device_delete_all_children().

MFC after:	1 week
2011-11-19 10:11:50 +00:00
Attilio Rao
ed1f6dc235 Introduce the option VFS_ALLOW_NONMPSAFE and turn it on by default on
all the architectures.
The option allows to mount non-MPSAFE filesystem. Without it, the
kernel will refuse to mount a non-MPSAFE filesytem.

This patch is part of the effort of killing non-MPSAFE filesystems
from the tree.

No MFC is expected for this patch.

Tested by:	gianni
Reviewed by:	kib
2011-11-08 10:18:07 +00:00
Ed Schouten
6472ac3d8a Mark all SYSCTL_NODEs static that have no corresponding SYSCTL_DECLs.
The SYSCTL_NODE macro defines a list that stores all child-elements of
that node. If there's no SYSCTL_DECL macro anywhere else, there's no
reason why it shouldn't be static.
2011-11-07 15:43:11 +00:00
Ed Schouten
d745c852be Mark MALLOC_DEFINEs static that have no corresponding MALLOC_DECLAREs.
This means that their use is restricted to a single C file.
2011-11-07 06:44:47 +00:00
Marius Strobl
8c1093fc50 - Import the common MII bitbang'ing code from NetBSD and convert drivers to
take advantage of it instead of duplicating it. This reduces the size of
  the i386 GENERIC kernel by about 4k. The only potential in-tree user left
  unconverted is xe(4), which generally should be changed to use miibus(4)
  instead of implementing PHY handling on its own, as otherwise it makes not
  much sense to add a dependency on miibus(4)/mii_bitbang(4) to xe(4) just
  for the MII bitbang'ing code. The common MII bitbang'ing code also is
  useful in the embedded space for using GPIO pins to implement MII access.
- Based on lessons learnt with dc(4) (see r185750), add bus barriers to the
  MII bitbang read and write functions of the other drivers converted in
  order to ensure the intended ordering. Given that register access via an
  index register as well as register bank/window switching is subject to the
  same problem, also add bus barriers to the respective functions of smc(4),
  tl(4) and xl(4).
- Sprinkle some const.

Thanks to the following testers:
Andrew Bliznak (nge(4)), nwhitehorn@ (bm(4)), yongari@ (sis(4) and ste(4))
Thanks to Hans-Joerg Sirtl for supplying hardware to test stge(4).

Reviewed by:	yongari (subset of drivers)
Obtained from:	NetBSD (partially)
2011-11-01 16:13:59 +00:00
Kevin Lo
a32376dd76 Check the return value of BUS_SETUP_INTR()
Reviewed by:	imp
2011-10-27 10:21:40 +00:00
David Schultz
a50079b7ff People porting FreeBSD to new architectures ought not have to
implement a deprecated FPU control interface in addition to the
standard one.  To make this clearer, further deprecate ieeefp.h
by not declaring the function prototypes except on architectures
that implement them already.

Currently i386 and amd64 implement the ieeefp.h interface for
compatibility, and for fp[gs]etprec(), which doesn't exist on
most other hardware.  Powerpc, sparc64, and ia64 partially implement
it and probably shouldn't, and other architectures don't implement it
at all.
2011-10-21 06:41:46 +00:00
Dag-Erling Smørgrav
a417d4a46b Trace attempts to call restricted MD syscalls. 2011-10-18 07:39:27 +00:00
Olivier Houchard
c435dafb84 Fix 2 bugs :
- A race condition could happen if two threads were using RAS at the same time
as the code didn't reset RAS_END, the RAS code could believe we were not in
a RAS, when we were in fact.
- Using signed value logic to compare addresses wasn't such a good idea.

Many thanks to Ian to investigate on these issues.

Pointy hat to: 	cognet
PR:		arm/161498
Submitted by:	Ian Lepore <freebsd At damnhippie DOT dyndns dot org
MFC after:	1 week
2011-10-16 17:59:28 +00:00
Olivier Houchard
b3e11029a7 Explicitely set ARM_RAS_START and ARM_RAS_END once the cacheline or the
page has been allocated, or we could end up using random values, and bad things
could happen.

PR:		arm/161492
Submitted by:	Ian Lepore <freebsd AT damnhippie dot dyndns DOT org>
MFC after:	1 week
2011-10-16 17:37:54 +00:00
Andrew Thompson
3cd6db794c Name these gpio pins better, they are on an external PLD and not the same as
the cpu wired gpio.
2011-10-12 20:58:54 +00:00
Andrew Thompson
bbdb7f2f2e Dont just set the pin high when turning on output, use the current value. Also
let this value be set when in input mode.
2011-10-12 20:57:21 +00:00
Konstantin Belousov
6bfe4c78c8 Remove unused define.
MFC after:	1 month
2011-10-07 16:09:44 +00:00
Andrew Thompson
870af4c67b Add missing newbus glue, this has never attached properly to gpiobus. 2011-10-05 08:33:50 +00:00
Marcel Moolenaar
66d18d0999 Properly guard definitions of DFLDSIZ, MAXDSIZ, DFLSSIZ, MAXSSIZ and
SGROWSIZ. They can be set in the kernel configuration file.
2011-10-04 17:00:50 +00:00
Marcel Moolenaar
7274b125c9 Fix build when DEBUG is defined in the kernel configuration file (e.g.
LINT).
2011-10-04 16:58:20 +00:00
Marcel Moolenaar
910686b3e3 Include opt_* headers first. Otherwise we can end up with redefined
symbols.
2011-10-04 16:55:53 +00:00
Marcel Moolenaar
70356b25a4 Fix build when DEBUG is defined (e.g. for LINT). 2011-10-04 16:53:11 +00:00
Konstantin Belousov
bc3a00cc9c Convert ARM to the syscallenter/syscallret system call sequence handlers.
Tested by:	gber
MFC after:	1 month
2011-10-04 13:14:24 +00:00
Kevin Lo
d11bbab85d Remove pointless semicolons after label 2011-09-30 04:55:23 +00:00
Kip Macy
8451d0dd78 In order to maximize the re-usability of kernel code in user space this
patch modifies makesyscalls.sh to prefix all of the non-compatibility
calls (e.g. not linux_, freebsd32_) with sys_ and updates the kernel
entry points and all places in the code that use them. It also
fixes an additional name space collision between the kernel function
psignal and the libc function of the same name by renaming the kernel
psignal kern_psignal(). By introducing this change now we will ease future
MFCs that change syscalls.

Reviewed by:	rwatson
Approved by:	re (bz)
2011-09-16 13:58:51 +00:00
Christian Brueffer
b48f7c4c8d Fix a zyd(4) comment typo that was copy+pasted into most kernel config files.
PR:		160276
Submitted by:	MATSUMIYA Ryo <matsumiya@mma.club.uec.ac.jp>
Approved by:	re (kib)
MFC after:	1 week
2011-09-11 17:39:51 +00:00
Konstantin Belousov
3407fefef6 Split the vm_page flags PG_WRITEABLE and PG_REFERENCED into atomic
flags field. Updates to the atomic flags are performed using the atomic
ops on the containing word, do not require any vm lock to be held, and
are non-blocking. The vm_page_aflag_set(9) and vm_page_aflag_clear(9)
functions are provided to modify afalgs.

Document the changes to flags field to only require the page lock.

Introduce vm_page_reference(9) function to provide a stable KPI and
KBI for filesystems like tmpfs and zfs which need to mark a page as
referenced.

Reviewed by:    alc, attilio
Tested by:      marius, flo (sparc64); andreast (powerpc, powerpc64)
Approved by:	re (bz)
2011-09-06 10:30:11 +00:00
Robert Watson
e5a0927394 Follow up to r225203 refining break-to-debugger run-time configuration
improvements:

(1) Implement new model in previously missed at91 UART driver
(2) Move BREAK_TO_DEBUGGER and ALT_BREAK_TO_DEBUGGER from opt_comconsole.h
    to opt_kdb.h (spotted by np)
(3) Garbage collect now-unused opt_comconsole.h

MFC after:	3 weeks
Approved by:	re (bz)
2011-08-27 14:24:27 +00:00
Konstantin Belousov
d98d0ce27a - Move the PG_UNMANAGED flag from m->flags to m->oflags, renaming the flag
to VPO_UNMANAGED (and also making the flag protected by the vm object
  lock, instead of vm page queue lock).
- Mark the fake pages with both PG_FICTITIOUS (as it is now) and
  VPO_UNMANAGED. As a consequence, pmap code now can use use just
  VPO_UNMANAGED to decide whether the page is unmanaged.

Reviewed by:	alc
Tested by:	pho (x86, previous version), marius (sparc64),
    marcel (arm, ia64, powerpc), ray (mips)
Sponsored by:	The FreeBSD Foundation
Approved by:	re (bz)
2011-08-09 21:01:36 +00:00
Rick Macklem
88c037e26a Change all the sample kernel configurations to use
NFSCL, NFSD instead of NFSCLIENT, NFSSERVER since
NFSCL and NFSD are now the defaults. The client change is
needed for diskless configurations, so that the root
mount works for fstype nfs.
Reported by seanbru at yahoo-inc.com for i386/XEN.

Approved by:	re (hrs)
2011-08-07 20:16:46 +00:00
Attilio Rao
5bfc249c2c Fix for arm and mips case the size of storage for sintrcnt/sintrnames.
It seems that "info as" is not much precise on what expect by pseudo-op
.word, by the way.

No MFC is previewed for this patch.

Tested by:	andreast, pluknet
Approved by:	re (kib)
2011-08-02 17:49:27 +00:00
Attilio Rao
68b739cd6f Add the possibility to specify from kernel configs MAXCPU value.
This patch is going to help in cases like mips flavours where you
want a more granular support on MAXCPU.

No MFC is previewed for this patch.

Tested by:	pluknet
Approved by:	re (kib)
2011-07-19 00:37:24 +00:00
Attilio Rao
521ea19d1c - Remove the eintrcnt/eintrnames usage and introduce the concept of
sintrcnt/sintrnames which are symbols containing the size of the 2
  tables.
- For amd64/i386 remove the storage of intr* stuff from assembly files.
  This area can be widely improved by applying the same to other
  architectures and likely finding an unified approach among them and
  move the whole code to be MI. More work in this area is expected to
  happen fairly soon.

No MFC is previewed for this patch.

Tested by:	pluknet
Reviewed by:	jhb
Approved by:	re (kib)
2011-07-18 15:19:40 +00:00
Marcel Moolenaar
cb06595948 Do not call platform_gpio_init() early. It doesn't work because we do
not have enough information to reliably setup GPIO pins. Do it when
we attach the gpio driver. This prevents hangs and the need to fake
up a softc.
2011-07-15 02:29:10 +00:00
Marcel Moolenaar
178b27373a Set preload_addr_relocate accordingly so that preloaded modules and
images are properly relocated.
2011-07-15 02:16:13 +00:00
Marcel Moolenaar
17d3cc91e0 In pmap_protect(), don't call vm_page_dirty() if the page is unmanaged. 2011-07-15 02:11:26 +00:00