previously always pointing to the default vnet context, to a
dynamically changing thread-local one. The currvnet context
should be set on entry to networking code via CURVNET_SET() macros,
and reverted to previous state via CURVNET_RESTORE(). Recursions
on curvnet are permitted, though strongly discuouraged.
This change should have no functional impact on nooptions VIMAGE
kernel builds, where CURVNET_* macros expand to whitespace.
The curthread->td_vnet (aka curvnet) variable's purpose is to be an
indicator of the vnet context in which the current network-related
operation takes place, in case we cannot deduce the current vnet
context from any other source, such as by looking at mbuf's
m->m_pkthdr.rcvif->if_vnet, sockets's so->so_vnet etc. Moreover, so
far curvnet has turned out to be an invaluable consistency checking
aid: it helps to catch cases when sockets, ifnets or any other
vnet-aware structures may have leaked from one vnet to another.
The exact placement of the CURVNET_SET() / CURVNET_RESTORE() macros
was a result of an empirical iterative process, whith an aim to
reduce recursions on CURVNET_SET() to a minimum, while still reducing
the scope of CURVNET_SET() to networking only operations - the
alternative would be calling CURVNET_SET() on each system call entry.
In general, curvnet has to be set in three typicall cases: when
processing socket-related requests from userspace or from within the
kernel; when processing inbound traffic flowing from device drivers
to upper layers of the networking stack, and when executing
timer-driven networking functions.
This change also introduces a DDB subcommand to show the list of all
vnet instances.
Approved by: julian (mentor)
to module builds. This avoids having to have the module builds walk up
the tree to find the kernel sources. It also allows a kernel + module
build to succeed when a new level of module subdirectories is added without
requiring that the /usr/share/mk/bsd.kmod.mk file on the machine be patched.
MFC after: 1 week
fix SMP topology detection. On i386, we extend it to cover Core, Core 2,
and Core i7 processors, not just Pentium 4 family, and move it to better
place. On amd64, all supported Intel CPUs should have this MSR.
support for NFSv4 as well as NFSv2 and 3.
It lives in 3 subdirs under sys/fs:
nfs - functions that are common to the client and server
nfsclient - a mutation of sys/nfsclient that call generic functions
to do RPCs and handle state. As such, it retains the
buffer cache handling characteristics and vnode semantics that
are found in sys/nfsclient, for the most part.
nfsserver - the server. It includes a DRC designed specifically for
NFSv4, that is used instead of the generic DRC in sys/rpc.
The build glue will be checked in later, so at this point, it
consists of 3 new subdirs that should not affect kernel building.
Approved by: kib (mentor)
and hide it inside of atrtc driver. Add new tunable hint.atrtc.0.clock
controlling it. Setting it to 0 disables using RTC clock as stat-/
profclock sources.
Teach i386 and amd64 SMP platforms to emulate stat-/profclocks using i8254
hardclock, when LAPIC and RTC clocks are disabled.
This allows to reduce global interrupt rate of idle system down to about
100 interrupts per core, permitting C3 and deeper C-states provide maximum
CPU power efficiency.
Broadcom BCM43xx chipsets. This driver uses the v3 firmware that
needs to be fetched separately. A port will be committed to create
the bwi firmware module.
The driver matches the following chips: Broadcom BCM4301, BCM4307,
BCM4306, BCM4309, BCM4311, BCM4312, BCM4318, BCM4319
The driver works for 802.11b and 802.11g.
Limitations:
This doesn't support the 802.11a or 802.11n portion of radios.
Some BCM4306 and BCM4309 cards don't work with Channel 1, 2 or 3.
Documenation for this firmware is reverse engineered from
http://bcm.sipsolutions.net/
V4 of the firmware is needed for 11a or 11n support
http://bcm-v4.sipsolutions.net/
Firmware needs to be fetched from a third party, port to be committed
# I've tested this with a BCM4319 mini-pci and a BCM4318 CardBus card, and
# not connected it to the build until the firmware port is committed.
Obtained from: DragonFlyBSD, //depot/projects/vap
Reviewed by: sam@, thompsa@
leading to a bug, when C-state does not decrease on sleep shorter then
declared transition latency. Fixing this deprecates workaround for broken
C-states on some hardware.
By the way, change state selecting logic a bit. Instead of last sleep
time use short-time average of it. Global interrupts rate in system is a
quite random value, to corellate subsequent sleeps so directly.
sleepable context for net80211 driver callbacks. This removes the need for USB
and firmware based drivers to roll their own code to defer the chip programming
for state changes, scan requests, channel changes and mcast/promisc updates.
When a driver callback completes the hardware state is now guaranteed to have
been updated and is in sync with net80211 layer.
This nukes around 1300 lines of code from the wireless device drivers making
them more readable and less race prone.
The net80211 layer has been updated as follows
- all state/channel changes are serialised on the taskqueue.
- ieee80211_new_state() always queues and can now be called from any context
- scanning runs from a single taskq function and executes to completion. driver
callbacks are synchronous so the channel, phy mode and rx filters are
guaranteed to be set in hardware before probe request frames are
transmitted.
Help and contributions from Sam Leffler.
Reviewed by: sam
Reimplement "kernel_pmap" in the standard way.
Eliminate unused variables. (These are mostly variables that were
discarded by the machine-independent layer after FreeBSD 4.x.)
Properly handle a vm_page_alloc() failure in pmap_init().
Eliminate dead or legacy (FreeBSD 4.x) code.
Eliminate unnecessary page queues locking.
Eliminate some excess white space.
Correct the synchronization of pmap_page_exists_quick().
Tested by: gonzo
MAC_BOOLEAN -> MAC_POLICY_BOOLEAN
MAC_BOOLEAN_NOSLEEP -> MAC_POLICY_BOOLEANN_NOSLEEP
MAC_CHECK -> MAC_POLICY_CHECK
MAC_CHECK_NOSLEEP -> MAC_POLICY_CHECK_NOSLEEP
MAC_EXTERNALIZE -> MAC_POLICY_EXTERNALIZE
MAC_GRANT -> MAC_POLICY_GRANT
MAC_GRANT_NOSLEEP -> MAC_POLICY_GRANT_NOSLEEP
MAC_INTERNALIZE -> MAC_POLICY_INTERNALIZE
MAC_PERFORM -> MAC_POLICY_PERFORM_CHECK
MAC_PERFORM_NOSLEEP -> MAC_POLICY_PERFORM_NOSLEEP
This frees up those macro names for use in wrapping calls into the MAC
Framework from the remainder of the kernel.
Obtained from: TrustedBSD Project
Restore previous behaviour for the case of unknown interrupt. Invocation
of IRQ -1 crashes my system on resume. Returning 0, as it was, is not
perfect also, but at least not so dangerous.
