difference between fi_wgen and f_seqcount, so the change is purely
cosmetic, but it makes the code easier to understand.
Submitted by: gianni
MFC after: 2 weeks
check for a UTF-8 compliant file name. Enabling this sysctl results in
an NFSv4 server that is non-RFC3530 compliant, therefore it is not enabled
by default. However, enabling this sysctl results in NFSv3 compatible
behaviour and fixes the problem reported by "dan at sunsaturn.com"
to freebsd-current@ on Nov. 14, 2011 under the subject "NFSV4 readlink_stat".
Tested by: dan at sunsaturn.com
Reviewed by: zack
MFC after: 2 weeks
The "domain-search" option (option 119) allows a DHCP server to publish
a list of implicit domain suffixes used during name lookup. This option
is described in RFC 3397.
For instance, if the domain-search option says:
".example.org .example.com"
and one wants to resolve "foobar", the resolver will try:
1. "foobar.example.org"
2. "foobar.example.com"
The file /etc/resolv.conf is updated with a "search" directive if the
DHCP server provides "domain-search".
A regression test suite is included in this patch under
tools/regression/sbin/dhclient.
PR: bin/151940
Sponsored by Yakaz (http://www.yakaz.com)
pins, rather than defaulting to 0 and 1.
This way the pin order can be reversed. It is reversed with the
TP-Link TL-WR1043nd.
Submitted by: Stefan Bethke <stb@lassitu.de>
These realtek switch PHYs speak a variant of i2c with some slightly
modified handling.
From the submitter, slightly modified now that some further digging
has been done:
The I2C framework makes a assumption that the read/not-write bit of the first
byte (the address) indicates whether reads or writes are to follow.
The RTL8366 family uses the bus: after sending the address+read/not-write byte,
two register address bytes are sent, then the 16-bit register value is sent
or received. While the register write access can be performed as a 4-byte
write, the read access requires the read bit to be set, but the first two bytes
for the register address then need to be transmitted.
This patch maintains the i2c protocol behaviour but allows it to be relaxed
(for these kinds of switch PHYs, and whatever else Realtek may do with this
almost-but-not-quite i2c bus) - by setting the "strict" hint to 0.
The "strict" hint defaults to 1.
Submitted by: Stefan Bethke <stb@lassitu.de>
It appears this device fails if sent a SYNCHRONIZE_CACHE command, so add
quirk to avoid sending it.
I will follow up with Micron on this issue, and will adjust the quirk if
necessary based on their feedback.
Reviewed by: hselasky@
no need to additionally add CPU memory barriers to the acquire variants of
atomic(9), these are documented to also include compiler memory barriers.
So add the latter, which were previously included by using membar(), back.
of the same lock_owner4 string. As such, the handling of cleanup
of lock_owners could be simplified. This simplification permitted
the client to do a ReleaseLockOwner operation when the process that
the lock_owner4 string represents, has exited. This permits the
server to release any storage related to the lock_owner4 string
before the associated open is closed. Without this change, it
is possible to exhaust a server's storage when a long running
process opens a file and then many child processes do locking
on the file, because the open doesn't get closed. A similar patch
was applied to the Linux NFSv4 client recently so that it wouldn't
exhaust a server's storage.
Reviewed by: zack
MFC after: 2 weeks
having dereferenced it. We either should generally check the device_t's
supplied to bus functions before using them (which we seem to virtually
never do) or just assume that they are not NULL.
While at it make this code fit 78 columns.
Found with: Coverity Prevent(tm)
CID: 4230
when actually setting a driver as especially ENOMEM is fatal in these
cases.
- Annotate other calls to device_set_devclass(9) and device_set_driver(9)
without the return value being checked and that are okay to fail.
Reviewed by: yongari (slightly earlier version)
in addition to the user priority for threads whose current real priority
is equal to the previous user priority or if the new priority is a
real-time priority. This allows priority changes of other threads to
have an immediate effect.
MFC after: 2 weeks
According to the open firmware standard, finddevice call has to return
a phandle with value of -1 in case of error.
This commit is to:
- Fix the FDT implementation of this interface (ofw_fdt_finddevice) to
return (phandle_t)-1 in case of error, instead of 0 as it does now.
- Fix up the callers of OF_finddevice() to compare the return value with
-1 instead of 0 to check for errors.
- Since phandle_t is unsigned, the return value of OF_finddevice should
be checked with '== -1' rather than '<= 0' or '> 0', fix up these cases
as well.
Reported by: nwhitehorn
Reviewed by: raj
Approved by: raj, nwhitehorn
to known AHCI-capable chips (AMD/NVIDIA), configured for legacy emulation.
Enabled by default to get additional performance and functionality of AHCI
when it can't be enabled by BIOS. Can be disabled to honor BIOS settings if
needed for some reason.
MFC after: 1 month
any installer-provided configuration files have been copied. This allows
users to edit their fstab, if desired, and to see what the installer has
placed in rc.conf.
Requested by: phk
MFC after: 1 day
vs. the comment documented "If we are working with a privileged socket,
then take only one attempt". Make the code match.
Furthermore, critical privileged applications that [over] log a vast amount
can look like a DoS to this code. Given it's unlikely the single reattempted
send() will succeeded, avoid usurping the scheduler in a library API for a
single non-critical facility in critical applications.
Obtained from: Juniper Networks
Discussed with: glebius
giving them a very brief description of the trade-offs. Whether the
user opts in or out add an entry to what will become /etc/rc.conf
explaining what dumpdev is and how to turn on/off crash dumps. The folks
who handle interacting with users submitting PRs have asked for this.
Reviewed by: nwhitehorn
MFC after: 1 day
NFS server and reuse it for writes as well to allow writes to the backing
store to be clustered.
- Use a prime number for the size of the heuristic table (1017 is not
prime).
- Move the logic to locate a heuristic entry from the table and compute
the sequential count out of VOP_READ() and into a separate routine.
- Use the logic from sequential_heuristic() in vfs_vnops.c to update the
seqcount when a sequential access is performed rather than just
increasing seqcount by 1. This lets the clustering count ramp up
faster.
- Allow for some reordering of RPCs and if it is detected leave the current
seqcount as-is rather than dropping back to a seqcount of 1. Also,
when out of order access is encountered, cut seqcount in half rather than
dropping it all the way back to 1 to further aid with reordering.
- Fix the new NFS server to properly update the next offset after a
successful VOP_READ() so that the readahead actually works.
Some of these changes came from an earlier patch by Bjorn Gronwall that was
forwarded to me by bde@.
Discussed with: bde, rmacklem, fs@
Submitted by: Bjorn Gronwall (1, 4)
MFC after: 2 weeks
-1. But, because ino_t is unsigned, this case was not covered by the
test ino > 0 in pipeclose(), leading to the free_unr(-1). Fix it by
explicitely comparing with 0 and -1. [1]
Do no access freed memory, the inode number was cached to prevent access
to cpipe after it possibly was freed, but I failed to commit the right
patch.
Noted by: gianni [1]
Pointy hat to: kib
MFC after: 3 days
to enable and configure the functionality.
Committed on behalf of Julien Ridoux and Darryl Veitch from the University of
Melbourne, Australia, as part of the FreeBSD Foundation funded "Feed-Forward
Clock Synchronization Algorithms" project.
For more information, see http://www.synclab.org/radclock/
Discussed with: Julien Ridoux (jridoux at unimelb edu au)
Submitted by: Julien Ridoux (jridoux at unimelb edu au)
