observed with -O2 (used by default).
Avoid function inlining for t1_bkpt_t on which we set a breakpoint.
Otherwise the address of the function is never called thus the
breakpoint never triggers.
Reported by: zont
Reviewed by: rpaulo
path longer than this.
- Fix an unreached case of check against sizeof buf, which in turn leads
to an off-by-one nul byte write on the stack. The original condition
can never be satisfied because the passed boundary is the maximum value
that can be returned, so code was harmless.
MFC after: 1 month
set of NetBSD software to compile as part of the FreeBSD build with
little or no modifiction. It is built as a static library and not
installed for general use. Likewise, its header files are not
installed.
Sponsored by: DARPA, AFRL
NetBSD's. This output size limited versions of vis and unvis functions
as well as a set of vis variants that allow arbitrary characters to be
specified for encoding.
Finally, MIME Quoted-Printable encoding as described in RFC 2045 is
supported.
* Don't provide clear_cache or the __sync_* functions on ARM with clang as
they are provided by clang as builtin functions.
* Tell clang it is aloud to compile some libgcc code using heinous GCC
extensions.
A fork/exec could happen between open and fcntl, leaking a file descriptor.
Using O_CLOEXEC fixes this and as a side effect simplifies the code.
NetBSD already had this (I checked this after making the change myself).
Reviewed by: gabor
Security Fixes
Prevents named from aborting with a require assertion failure
on servers with DNS64 enabled. These crashes might occur as a
result of specific queries that are received.
New Features
* Elliptic Curve Digital Signature Algorithm keys and signatures in
DNSSEC are now supported per RFC 6605. [RT #21918]
Feature Changes
* Improves OpenSSL error logging [RT #29932]
* nslookup now returns a nonzero exit code when it is unable to get
an answer. [RT #29492]
Other critical bug fixes are included.
Approved by: delphij (mentor)
MFC after: 3 days
Security: CVE-2012-5688
Sponsored by: DK Hostmaster A/S
The changes were derived from what has been committed to NetBSD, with
modifications. These are:
1. Preserve the existsing GLOB_LIMIT behaviour by including the number
of matches to the set of parameters to limit.
2. Change some of the limits to avoid impacting normal use cases:
GLOB_LIMIT_STRING - change from 65536 to ARG_MAX so that glob(3)
can still provide a full command line of expanded names.
GLOB_LIMIT_STAT - change from 128 to 1024 for no other reason than
that 128 feels too low (it's not a limit that impacts the
behaviour of the test program listed in CVE-2010-2632).
GLOB_LIMIT_PATH - change from 1024 to 65536 so that glob(3) can
still provide a fill command line of expanded names.
3. Protect against buffer overruns when we hit the GLOB_LIMIT_STAT or
GLOB_LIMIT_READDIR limits. We append SEP and EOS to pathend in
those cases. Return GLOB_ABORTED instead of GLOB_NOSPACE when we
would otherwise overrun the buffer.
This change also modifies the existing behaviour of glob(3) in case
GLOB_LIMIT is specifies by limiting the *new* matches and not all
matches. This is an important distinction when GLOB_APPEND is set or
when the caller uses a non-zero gl_offs. Previously pre-existing
matches or the value of gl_offs would be counted in the number of
matches even though the man page states that glob(3) would return
GLOB_NOSPACE when gl_matchc or more matches were found.
The limits that cannot be circumvented are GLOB_LIMIT_STRING and
GLOB_LIMIT_PATH all others can be crossed by simply calling glob(3)
again and with GLOB_APPEND set.
The entire description above applies only when GLOB_LIMIT has been
specified of course. No limits apply when this flag isn't set!
Obtained from: Juniper Networks, Inc
equivalent to malloc(size). This eliminates the conditional expression
used for calling either realloc() or malloc() when realloc() will do
all the time.
free and clear the gl_pathv pointer in the glob_t structure. Such
breaks the invariant of the glob_t structure, as stated in the comment
right in front of the globextend() function. If gl_pathv was non-NULL,
then gl_pathc was > 0. Making gl_pathv a NULL pointer without also
setting gl_pathc to 0 is wrong.
Since we otherwise don't free the memory associated with a glob_t in
error cases, it's unlikely that this change will cause a memory leak
that wasn't already there to begin with. Callers of glob(3) must
call globfree(3) irrespective of whether glob(3) returned an error
or not.
This commit adds a new mode option 'e' that must follow any 'b', '+' and/or
'x' options. C11 is clear about the 'x' needing to follow 'b' and/or '+' and
that is what we implement; therefore, require a strict position for 'e' as
well.
For freopen() with a non-NULL path argument and fopen(), the close-on-exec
flag is set iff the 'e' mode option is specified. For freopen() with a NULL
path argument and fdopen(), the close-on-exec flag is turned on if the 'e'
mode option is specified and remains unchanged otherwise.
Although the same behaviour for fopen() can be obtained by open(O_CLOEXEC)
and fdopen(), this needlessly complicates the calling code.
Apart from the ordering requirement, the new option matches glibc.
PR: kern/169320
libc.a and libc_p.a. In addition, define isnan in libm.a and libm_p.a,
but not in libm.so.
This makes it possible to statically link executables using both isnan
and isnanf with libc and libm.
Tested by: kargl
MFC after: 1 week
There is one known issue: Some probes will display an error message along the
lines of: "Invalid address (0)"
I tested this with both a simple dtrace probe and dtruss on a few different
binaries on 32-bit. I only compiled 64-bit, did not run it, but I don't expect
problems without the modules loaded. Volunteers are welcome.
MFC after: 1 month
Firmware tables require too much knowledge of system configuration,
and it's difficult to pass that information in general terms to a library.
The upcoming ACPI work exposed this - it will also livein bhyve.
Also, remove code specific to NetApp from the mptable name, and remove
the -n option from bhyve.
Reviewed by: neel
Obtained from: NetApp
the man page) [0]
While here add support for draft-reschke-http-status-308-07
PR: 172451 [0]
Submitted by: gcooper [0]
Reviewed by: des
Approved by: cperciva
MFC after: 1 week
but committing it helps to get everyone on the same page and makes
sure we make progress.
Tinderbox breakages that are the result of this commit are entirely
the committer's fault -- in other words: buildworld testing on amd64
only.
Credits follow:
Submitted by: Garrett Cooper <yanegomi@gmail.com>
Sponsored by: Isilon Systems
Based on work by: keramida@
Thanks to: gnn@, mdf@, mlaier@, sjg@
Special thanks to: keramida@
output and replace it with a new visible sysctl kern.ipc.acceptqueue
of the same functionality. It specifies the maximum length of the
accept queue on a listen socket.
The old kern.ipc.somaxconn remains available for reading and writing
for compatibility reasons so that existing programs, scripts and
configurations continue to work. There no plans to ever remove the
orginal and now hidden kern.ipc.somaxconn.
(Model 0x2D /* Per Intel document 253669-044US 08/2012. */)
Add manpage to document all the goodness that is available in this
processor model.
No support for uncore events at this time.
Submitted by: hiren panchasara <hiren.panchasara@gmail.com>
Reviewed by: jimharris@ fabient@
Obtained from: Yahoo! Inc.
MFC after: 2 weeks
This adds two features:
* uid_from_user() and gid_from_group() as the reverse of user_from_uid()
and groups_from_gid().
* pwcache_userdb() and pwcache_groupdb() which allow alternative lookup
functions to be used. For example lookups from passwd and group
databases in a non-standard location.
This self-written compiler warning, which is hopefully going to be
committed into LLVM sources soon, warns about potentially missing
`static' keywords, similar to -Wmissing-prototypes.
- bin/pax: Move external declaration of chdname and s_mask into extern.h.
- bin/setfacl: Move setfacl.c-specific stuff out of setfacl.h.
- sbin/mount_fusefs: Remove char *progname; use getprogname().
- others: add `static' where possible.
GIANT from VFS. In addition, disconnect also netsmb, which is a base
requirement for SMBFS.
In the while SMBFS regular users can use FUSE interface and smbnetfs
port to work with their SMBFS partitions.
Also, there are ongoing efforts by vendor to support in-kernel smbfs,
so there are good chances that it will get relinked once properly locked.
This is not targeted for MFC.
GIANT from VFS. This code is particulary broken and fragile and other
in-kernel implementations around, found in other operating systems,
don't really seem clean and solid enough to be imported at all.
If someone wants to reconsider in-kernel NTFS implementation for
inclusion again, a fair effort for completely fixing and cleaning it
up is expected.
In the while NTFS regular users can use FUSE interface and ntfs-3g
port to work with their NTFS partitions.
This is not targeted for MFC.
GIANT from VFS. In addition, disconnect also netncp, which is a base
requirement for NWFS.
In the possibility of a future maintenance of the code and later
readd to the FreeBSD base, maybe we should think about a better location
for netncp. I'm not entirely sure the / top location is actually right,
however I will let network people to comment on that more specifically.
This is not targeted for MFC.
table and the requirement on trailing zero bits.
* Remove the __aligned() compiler directives as these were found
to have a negative effect on the produced code.
Submitted by: bde
Approved by: das (mentor)
srandomdev(). This doesn't actually work
with any modern C compiler:
In particular, both clang and modern gcc
verisons silently elide any xor operation
with 'junk'.
Approved by: secteam
MFC after: 3 days
1. Don't do upgrade_checks when using bmake. As long as we have WITH_BMAKE,
there's a bootstrap complication in ths respect. Avoid it. Make the
necessary changes to have upgrade_checks work wth bmake anyway.
2. Remove the use of -E. It's not needed in our build because we use ?= for
the respective variables, which means that we'll take the environment
value (if any) anyway.
3. Properly declare phony targets as phony as bmake is a lot smarter (and
thus agressive) about build avoidance.
4. Make sure CLEANFILES is complete and use it on .NOPATH. bmake is a lot
smarter about build avoidance and should not find files we generate in
the source tree. We should not have files in the repository we want to
generate, but this is an easier way to cross this hurdle.
5. Have behavior under bmake the same as it is under make with respect to
halting when sub-commands fail. Add "set -e" to compound commands so
that bmake is informed when sub-commands fail.
6. Make sure crunchgen uses the same make as the rest of the build. This
is important when the make utility isn't called make (but bmake for
example).
7. While here, add support for using MAKEOBJDIR to set the object tree
location. It's the second alternative bmake looks for when determining
the actual object directory (= .OBJDIR).
Submitted by: Simon Gerraty <sjg@juniper.net>
Submitted by: John Van Horne <jvanhorne@juniper.net>
to be a wrapper for the canonical system header file. Unfortunately, we do
not have one (yet) and some times it is causing weird failures when clang
is used for building ports. More complete and correct file will come from
libcxxrt in the future.
Discussed with: dim, kib, theraven
MFC after: 1 week
* jail_setv will leak a parameter name if jailparam_import fails.
* jailparam_all loses the jailparam pointer on realloc error
(a clear freshman mistake).
* If jailparam_init fails, the caller doesn't need to jailparam_free
the buffer. That's not really clear, so set things to NULL allowing
jailparam_free to work without error (though it's still not required).
After further discussion, instead of pretending to use
uid_t and gid_t as upstream Solaris and linux try to, we
are better using u_int, which is in fact what the code
can handle and best approaches the range of values used
by uid and gid.
Discussed with: bde
Reviewed by: bde
address associated with the guest memory segment. This is because there is
no longer a 1:1 mapping between GPA and HPA.
As a result 'vmmctl' can only display the guest physical address and the
length of the lowmem and highmem segments.
chunks. This breaks the assumption that the entire memory segment is
contiguously allocated in the host physical address space.
This also paves the way to satisfy the 4KB page allocations by requesting
free pages from the VM subsystem as opposed to hard-partitioning host memory
at boot time.
The previous change (based on Solaris) doesn't work properly either
as the casting only has the effect of quieting the compiler.
Move back to the previous solution but adjust the sizeof()
type in xdr_array(). This should mostly work (by accident).
Reported by: bde
1) Don't iterate the loop from the environment array beginning each time,
iterate it under the last place we deactivate instead.
2) Call __rebuild_environ() not on each iteration but once, only at the end
of whole loop (of course, only in case if something is changed).
MFC after: 1 week
As part of the previous commit, uses of xdr_int() were replaced
with xdr_u_int(). This has undesired effects as the second
argument doesn't match exactly uid_t or gid_t. It also breaks
assumptions in the size of the provided types.
To work around those issues we revert back to the use of xdr_int()
but provide proper casting so the behaviour doesn't change.
While here fix a style issue in the affected lines.
Reported by: bde
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the same
way.
This change matches the reference (OpenSolaris) implementation.
Tested by: David Wolfskill
Obtained from: Bull GNU/Linux NFSv4 Project (libtirpc)
MFC after: 2 weeks
__rpc_getconfip is supposed to return the first netconf
entry supporting tcp or udp, respectively. The code will
currently return the *last* entry, plus it will leak
memory when there is more than one such entry.
This change matches the reference (OpenSolaris)
implementation.
Tested by: David Wolfskill
Obtained from: Bull GNU/linux NFSv4 Project (libtirpc)
MFC after: 1 week
to craft environment variables with similar names like that:
a=1
a=2
...
unsetenv("a") should remove them all to make later getenv("a") impossible.
Fix it to do so (this is GNU autoconf test #3 failure too).
PR: 172273
MFC after: 1 week
. Change the API for the LD80C by removing the explicit passing
of the sign bit. The sign can be determined from the last
parameter of the macro.
. On i386, load long double by bit manipulations to work around
at least a gcc compiler issue. On non-i386 ld80 architectures,
use a simple assignment.
* ld80/s_expl.c:
. Update the only consumer of LD80C.
Submitted by: bde
Approved by: das (mentor)
This fixes a race condition where another thread may fork() before CLOEXEC
is set, unintentionally passing the descriptor to the child process.
This commit only adds O_CLOEXEC flags to open() or openat() calls where no
fcntl(fd, F_SETFD, FD_CLOEXEC) follows. The separate fcntl() call still
leaves a race window so it should be fixed later.
Because fts keeps internal file descriptors open across calls, making such
descriptors close-on-exec helps not only multi-threaded applications but
also single-threaded applications.
In particular, this prevents passing a temporary file descriptor for saving
the current directory to processes created via find -exec.
The attempt to merge changes from the linux libtirpc caused
rpc.lockd to exit after startup under unclear conditions.
After many hours of selective experiments and inconsistent results
the conclusion is that it's better to just revert everything and
restart in a future time with a much smaller subset of the
changes.
____
MFC after: 3 days
Reported by: David Wolfskill
Tested by: David Wolfskill
Passing an invalid pointer results in undefined behaviour.
The wrappers in libthr access some of the data pointed to by the arguments
in userland, so that an invalid pointer will cause a signal and not an
[EFAULT] error return.
Furthermore, if the [EFAULT] error occurs when the kernel is writing, it is
not a proper error in the sense that the call still commits (changing the
signal disposition or accepting the signal).
MFC after: 1 week
The following change caused rpc.lockd to exit after startup:
____
libtirpc: be sure to free cl_netid and cl_tp
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the
same way.
____
MFC after: 3 days
Reported by: David Wolfskill
Tested by: David Wolfskill
. Fix the threshold for expl(x) where |x| is small.
. Also update the previously incorrect comment to match the
new threshold.
* ld128/s_expl.c:
. Re-order logic in exceptional cases to match the logic used in
other long double functions.
. Fix the threshold for expl(x) where is |x| is small.
. Also update the previously incorrect comment to match the
new threshold.
Submitted by: bde
Approved by: das (mentor)
. Guard a comment from reformatting by indent(1).
. Re-order variables in declarations to alphabetical order.
. Remove a banal comment.
* ld128/s_expl.c:
. Add a comment to point to ld80/s_expl.c for implementation details.
. Move the #define of INTERVAL to reduce the diff with ld80/s_expl.c.
. twom10000 does not need to be volatile, so move its declaration.
. Re-order variables in declarations to alphabetical order.
. Add a comment that describes the argument reduction.
. Remove the same banal comment found in ld80/s_expl.c.
Reviewed by: bde
Approved by: das (mentor)
