Commit Graph

2696 Commits

Author SHA1 Message Date
Rodney W. Grimes
4ada418a9b Replaced the return (1)'s with return (IO_KBDSIZE) in the probe code so
that the printfs during the probing prints the range instead of just the
start address.
1993-08-28 13:26:30 +00:00
Rodney W. Grimes
6526fb8330 Revised drivers from Julian. 1993-08-28 03:07:44 +00:00
Rodney W. Grimes
89bc97311a xxxprobe now returns the correct number of I/O registers used so that
the probe output during boot gives the I/O range instead of just the
starting address
1993-08-28 03:02:52 +00:00
Rodney W. Grimes
905ee1678d Fix so that unit number 1 is found again. 1993-08-24 19:41:58 +00:00
Rodney W. Grimes
237fbcc806 Corrected off by 2 error in DELAY macro (it was delaying for 2 * value).
From Bruce Evans.
1993-08-24 01:24:43 +00:00
Rodney W. Grimes
f254020327 Some more small nits in the printf's fixed. 1993-08-22 10:00:16 +00:00
Rodney W. Grimes
296cbdb15b Fixed printf's so that they announce them selfs correctly (ie aha%d: before
every error message and every probe message).
1993-08-21 20:01:59 +00:00
Rodney W. Grimes
3c742f974a Added from: line to reference the pccons.c derivation of this code, otherwise
the BSD copyright would be very bad to have on this file.
1993-08-20 17:19:29 +00:00
Rodney W. Grimes
b6105e6d2a Update scsi code to the latest from Julian. This code is now identical
to the last copy from Julian.  After this commit I will be commiting the
local fixes and makeing diffs to send back to Julian so he can update his
code.

----
>From julian@jules.DIALix.oz.au  Thu Aug  5 09:25:23 1993
To: hd@world.std.com, julian@jules.DIALix.oz.au
Cc: nate@bsd.coe.montana.edu
Subject: Re: new scsi

----
>From julian@jules.DIALix.oz.au  Sat Aug  7 04:13:17 1993
To: hd@world.std.com (HD Associates)
Cc: nate@bsd.coe.montana.edu
Subject: Re: timeout diffs

Here are the diffs to take the scsi stuff to my latest tree from what
Nate and you received..

the changes remove all the local timeout stuff and use (un)timeout(),

----
>From julian@jules.DIALix.oz.au  Sat Aug  7 04:13:45 1993
To: hd@world.std.com (HD Associates)
Cc: nate@bsd.coe.montana.edu, briggs@csugrad.cs.vt.edu

here is a fix for a silly bug in the scsiconf I just sent out
and a similar fix for st.c
1993-08-20 09:21:40 +00:00
Andrew Moore
7aed710168 added Bustek 545 support (patch from Christoph Robitschko):
*** aha1542.c~	Thu Aug 19 14:25:33 1993
--- aha1542.c	Thu Aug 19 14:25:49 1993
***************
*** 954,959 ****
--- 954,960 ----
  	printf("aha%d:",unit);
  #define	PRNT(x) printf(x)
  #endif	__386BSD__
+ 	DELAY(1000);	/* for Bustek 545 */
  	aha_cmd(unit,0, sizeof(conf), 0 ,&conf, AHA_CONF_GET);
  	switch(conf.chan)
  	{
1993-08-19 21:32:59 +00:00
Rodney W. Grimes
3b3837db61 Fixed poor timeout code in out_fdc. The timeout counter was not being
reinitialized between while loops.  Added comments about what was going
on in the out_fdc routine.

out_fdc now returns if the direction bit is not set in time instead of
trying to wait for MRQ to get cleared.
1993-08-12 09:21:20 +00:00
Rodney W. Grimes
1ce6e34045 Moved _eintr{names,cnt} so that vmstat -i does not report all the debugging
stuff of the fast interrupt code.
1993-08-09 18:20:26 +00:00
Rodney W. Grimes
0f5b6b9987 Fixed for DQFLQUIET flag from: Terry Lee <terry@uivlsisd.csl.uiuc.edu>
I submitted the part of patch00155 that fixes wd.c not reporting any
bad blocks.  Unfortunately, the patch created a new problem that makes new
installations using that kernel impossible.  I have included a patch below that
should fix both problems.  The fix comes from Tom Ivar Helbekkmo's wd driver
(the Norway wd driver).  I've also eliminated the use of the DKFL_QUIET flag
completely, since it is not used anymore.

Fixed wdgetctrl routines for so that it returns a meaniful string for
non IDE disk drives.  It also nolonger returns success when a drive is
not really there.
1993-08-08 07:03:21 +00:00
Rodney W. Grimes
7e00252602 Added printf for cases AHB_ASN (async even notification) and AHB_HW_ERR so
that we are notified when these events occur.  This may lead us to the
cause of certain AHB timeout/lockup problems.

From: Roy Neese of Adaptec
1993-08-08 04:46:37 +00:00
Rodney W. Grimes
2ea3f75bd2 Fixed **probing for scsi devices** message to have a controller and unit
message on the begining of it:
aha0: **probing for scsi devices**
1993-08-06 11:59:06 +00:00
David Greenman
0d1a37c0f1 * Fixed problem where some rev 8013EBT boards want the DCR_LS flag
* set in order to work in 16bit mode.

   Seems also to improve performance by 15%! (?!) I think there might
be more to this flag than the manual says.
1993-08-02 10:36:05 +00:00
Jordan K. Hubbard
c3b435bb51 Updated syscons to 0.2b - please test this! It won't be in the ALPHA
release, but it's still worth testing.
1993-07-30 02:20:26 +00:00
Nate Williams
02e451a8a9 Syncing our sources back with Julian's, and removing PATCHKIT headers.
Large Bustek changes, most everything else is minimal.
1993-07-29 11:55:37 +00:00
David Greenman
269312019a * Applied fixes from Bruce Evans to fix COW bugs, >1MB kernel loading,
profiling, and various protection checks that cause security holes
  and system crashes.
* Changed min/max/bcmp/ffs/strlen to be static inline functions
  - included from cpufunc.h in via systm.h. This change
  improves performance in many parts of the kernel - up to 5% in the
  networking layer alone. Note that this requires systm.h to be included
  in any file that uses these functions otherwise it won't be able to
  find them during the load.
* Fixed incorrect call to splx() in if_is.c
* Fixed bogus variable assignment to splx() in if_ed.c
1993-07-27 10:52:31 +00:00
David Greenman
49386830c3 * Added include of systm.h to pick up inlined min/max/bcmp if you have
* them in cpufunc.h. Modified wait loop in reset to look a little better.
 * Added read for talley counters to prevent an infinite loop on old
 * 8003E's if they (the counters) overflow.
1993-07-27 03:13:50 +00:00
Jordan K. Hubbard
916347f77e Added necessary files for syscons (may move font include later, but for now
it's easier to leave there since I don't feel like breaking anything).
1993-07-26 21:21:11 +00:00
David Greenman
d0338d9612 Fixed logic problem which caused a bogus value to be written to the 3c503
asic register even if the board isn't a 3c503. This caused old 8003E's not
to work because they ignore IO address bits >10bits and the 3c503 asic is
located at +0x400....the offset was ignored by the 8003E and so the
value was written to one of the NIC registers. The bug was discovered by
Wolfgang Solfrank.
1993-07-25 23:43:30 +00:00
Rodney W. Grimes
5bd44448a9 Very small patch from Julian Elischer to make the ultra14f.c driver work
with the 34f as well.
1993-07-22 00:56:23 +00:00
Paul Richards
31e73a990a Fixed attach printfs for new format (thanks Chris) 1993-07-21 06:07:58 +00:00
Paul Richards
d55523f96b Added statistical counters ipackets,opackets etc. 1993-07-21 04:18:47 +00:00
David Greenman
69a164c5e3 Added config file override for memory size and added flags to force
8bit or 16bit operation, and a flag to disable transmitter double buffering.
   See the updated "ed.relnotes" file for information about how to set
the flags.
   This should be considered the first "production"  release. It still
needs a manual page, though.
1993-07-20 23:16:50 +00:00
Jordan K. Hubbard
ba52f64934 Applied Andrew's patch to fix loop-on-logout problem. 1993-07-20 02:06:49 +00:00
Jordan K. Hubbard
c58613f344 Changed comment relating to memsize to be a little less misleading. 1993-07-20 02:02:12 +00:00
Jordan K. Hubbard
2a1e5244b2 Fixed to allow iosiz config parameter to override what was (for me,
incorrectly) probed.  This allows you more flexibility in getting weird
WD 80x3 clones to work.
1993-07-20 01:39:24 +00:00
Jordan K. Hubbard
bb5d729efe Removed check for interrupting board before interrupts were enabled.
This should result in more AST clones getting seen.
1993-07-20 00:22:30 +00:00
Rodney W. Grimes
7ea04e18b1 Fixed sccs id to be From:\n com.c xxxx. The sccs id was changed by the
patch kit and it should not have been.
1993-07-18 21:27:57 +00:00
Paul Richards
1e41bb4918 Fixed warning from gcc1 (but not gcc2 for some reason).
2nd parameter to isread was unsigned char and function declaration was for
char. Changed function declaration to unsigned char.
1993-07-18 20:57:34 +00:00
Paul Richards
a94a9c9493 Small fix to correct warning --
missing cast of u_short to int in isread call.
1993-07-18 04:18:00 +00:00
David Greenman
2a6c898016 Modified attach printf's so that the output is compatible with the "new"
way of doing things. There still remain several drivers that need to
be updated.  Also added a compile-time option to pccons to switch the
control and caps-lock keys (REVERSE_CAPS_CTRL) - added for my personal
sanity.
1993-07-15 17:53:14 +00:00
Rodney W. Grimes
0d01087b28 From Bruce Evans:
lpt doesn't work here if the printer is not turned on at boot time (this
has been reported for other systems).

lpt has a weird mapping of the flag bits vs printer numbers and MAKEDEV
does not understand this (printer 0 uses minor numbers 0-0x3f, printer 1
uses minors 0x40-0x7f, etc).

The following (simpler) problems are fixed by the patch.

lpt did not check the minor number on open, so if NLPT1 == 1 and you
try to open printer 1 then random memory above the lpt_sc array is
accessed.  I thought I had this problem for minors 1 and 2.  However,
it does not actually occur until minor 0x40.  Does anyone have lpt64?

lpt had several unnecessary && broken ANSIisms and other sloppy
declarations.

Bruce
1993-07-13 18:52:49 +00:00
Paul Richards
8efffeb95f Added copyright message -- it didn't have one before 1993-07-09 00:09:34 +00:00
David Greenman
43d5830f3d fixed bugs in the probe routine uncovered by the previous fix. 1993-06-27 10:28:28 +00:00
David Greenman
3340e10399 fixed bug in probe that causes it to complain about 'Invalid irq configuration'
if the interface isn't present in the system.
1993-06-26 02:32:26 +00:00
David Greenman
c8378b88c6 Second beta release of device driver for SMC/WD 80x3 ethernet boards +
some additional comments.
1993-06-23 16:22:04 +00:00
David Greenman
258445a954 Second beta release of device driver for WD/SMC 80x3 and 3c503 ethernet boards 1993-06-22 12:10:07 +00:00
Paul Richards
ee4a642ef6 Added bpf support to if_is.c (Isolan driver) 1993-06-19 08:24:14 +00:00
Rodney W. Grimes
4232df2cf0 Obsolete if_we.c driver, more attach call to where it belongs.
Still need to fix all the drivers.
1993-06-18 22:18:57 +00:00
Paul Richards
ba98737aba New if_is.c isolan ethernet driver that can handle multiple cards. 1993-06-18 20:25:32 +00:00
Paul Richards
7c434002a4 Upgrade to GCC 2.X 1993-06-18 02:47:24 +00:00
David Greenman
8eece53087 Beta release of device driver for SMC/WD80x3 and 3C503 ethernet boards. 1993-06-14 22:21:25 +00:00
Rodney W. Grimes
5b81b6b301 Initial import, 0.1 + pk 0.2.4-B1 1993-06-12 14:58:17 +00:00