context inside the RPC code.
Temporarily set td's cred to mount's cred before calling socreate() via
__rpc_nconf2socket().
Submitted by: rmacklem (in part)
Reviewed by: rmacklem, rwatson
Discussed with: dfr, bz
Approved by: re (rwatson), julian (mentor)
MFC after: 3 days
kernel resources that block other threads, like vnode locks. The SIGSTOP
sent to such thread (process, rather) shall not stop it until thread
releases the resources.
Tested by: pho
Reviewed by: jhb
Approved by: re (kensmith)
call could get hung sleeping on "gsssta" if the credentials for a user
that had been accessing the mount point have expired. This happened
because rpc_gss_destroy_context() would end up calling itself when the
"destroy context" RPC was attempted, trying to refresh the credentials.
This patch just checks for this case in rpc_gss_refresh() and returns
without attempting the refresh, which avoids the recursive call to
rpc_gss_destroy_context() and the subsequent hang.
Reviewed by: dfr
Approved by: re (Ken Smith), kib (mentor)
This is normally done by a loop in clnt_dg_close(), but requests that aren't
in the pending queue at the time of closing, don't get set. This avoids a
panic in xdrmbuf_create() when it is called with a NULL cr_mrep if
cr_error doesn't get set to ESHUTDOWN while closing.
Reviewed by: dfr
Approved by: re (Ken Smith), kib (mentor)
during reading of the code. Change the code so that it never accesses
rc_connecting, rc_closed or rc_client when the rc_lock mutex is not held.
Also, it now performs the CLNT_CLOSE(client) and CLNT_RELEASE(client)
calls after the rc_lock mutex has been released, since those calls do
msleep()s with another mutex held. Change clnt_reconnect_call() so that
releasing the reference count is delayed until after the
"if (rc->rc_client == client)" check, so that rc_client cannot have been
recycled.
Tested by: pho
Reviewed by: dfr
Approved by: kib (mentor)
side fails, the entry in the cache is left with no valid context
(gd_ctx == GSS_C_NO_CONTEXT). As such, subsequent hits on the cache
will result in persistent authentication failure, even after the user has
done a kinit or similar and acquired a new valid TGT. This patch adds a test
for that case upon a cache hit and calls rpc_gss_init() to make another
attempt at getting valid credentials. It also moves the setting of gc_proc
to before the import of the principal name to ensure that, if that case
fails, it will be detected as a failure after going to "out:".
Reviewed by: dfr
Approved by: kib (mentor)
NGROUPS_MAX, eliminate ABI dependencies on them, and raise the to 1024
and 1023 respectively. (Previously they were equal, but under a close
reading of POSIX, NGROUPS_MAX was defined to be too large by 1 since it
is the number of supplemental groups, not total number of groups.)
The bulk of the change consists of converting the struct ucred member
cr_groups from a static array to a pointer. Do the equivalent in
kinfo_proc.
Introduce new interfaces crcopysafe() and crsetgroups() for duplicating
a process credential before modifying it and for setting group lists
respectively. Both interfaces take care for the details of allocating
groups array. crsetgroups() takes care of truncating the group list
to the current maximum (NGROUPS) if necessary. In the future,
crsetgroups() may be responsible for insuring invariants such as sorting
the supplemental groups to allow groupmember() to be implemented as a
binary search.
Because we can not change struct xucred without breaking application
ABIs, we leave it alone and introduce a new XU_NGROUPS value which is
always 16 and is to be used or NGRPS as appropriate for things such as
NFS which need to use no more than 16 groups. When feasible, truncate
the group list rather than generating an error.
Minor changes:
- Reduce the number of hand rolled versions of groupmember().
- Do not assign to both cr_gid and cr_groups[0].
- Modify ipfw to cache ucreds instead of part of their contents since
they are immutable once referenced by more than one entity.
Submitted by: Isilon Systems (initial implementation)
X-MFC after: never
PR: bin/113398 kern/133867
SVCXPTR structure returned by them, it was possible for the structure
to be free'd before svc_reg() had been completed using the structure.
This patch acquires a reference count on the newly created structure
that is returned by svc_[dg|vc|tli|tp]_create(). It also
adds the appropriate SVC_RELEASE() calls to the callers, except the
experimental nfs subsystem. The latter will be committed separately.
Submitted by: dfr
Tested by: pho
Approved by: kib (mentor)
variables set via the getcredhostid() function. I also changed the type
of ci_hostid to "unsigned long" so that it matches what is returned by
getcredhostid(). Although "struct svc_rpc_gss_clientid" goes on the wire
during RPCSEC_GSS, it is just a variable # of opaque bytes to the client,
so it doesn't matter how much storage ci_hostid uses.
Approved by: kib (mentor)
server would crash because the Solaris10 client would attempt to use
Sun's NFSACL protocol, which FreeBSD doesn't support. When the server
generated the error reply via svcerr_noprog(), it would cause a crash
because it would try and wrap a NULL reply. According to RFC2203, no
wrapping is required for error cases. This one line change avoids
wrapping of NULL replies.
Reviewed by: dfr
Approved by: kib (mentor)
connect failed, the thread would be left stuck in msleep()
indefinitely, since it would call msleep() again for the case
where rc_client == NULL. Change the loop criteria and the if just
after the loop, so that this case is handled correctly.
Reviewed by: dfr
Approved by: kib (mentor)
where an improperly initialized prison field could lead to a panic. This
is not the correct solution, since it fails to address similar problems
for both AUDIT and MAC, which also rely on properly initialized
credentials, but should reduce panic reports while we work that out.
Reported by: ps, kan, others
thread has already unregistered the structure. Also add a KASSERT()
to xprt_unregister_locked() to check that the structure hasn't already
been unregistered.
Reviewed by: jhb
Tested by: pho
Approved by: kib (mentor)
mtx_destroy() of the pool mutex to after SVC_RELEASE(), because
the pool mutex was still locked when soclose() was called by svc_dg_destroy().
To fix this, an mtx_unlock() was added where mtx_destroy() was before
r193436.
Reviewed by: jhb
Tested by: pho
Approved by: rwatson (mentor)
holding SOCKBUF_LOCK() isn't sufficient to guarantee that there is
no upcall in progress, since SOCKBUF_LOCK() is released/re-acquired
in the upcall. An upcall reference counter was added to the upcall
structure that is incremented at the beginning of the upcall and
decremented at the end of the upcall. As such, a reference count == 0
when holding the SOCKBUF_LOCK() guarantees there is no upcall in
progress. Add a function that is called just after soupcall_clear(),
which waits until the reference count == 0.
Also, move the mtx_destroy() down to after soupcall_clear(), so that
the mutex is not destroyed before upcalls are done.
Reviewed by: dfr, jhb
Tested by: pho
Approved by: kib (mentor)
Add a flag so that soupcall_clear() is only called once to cancel
an upcall.
Move the test for xprt_registered in the upcall down to after the
mtx_lock() of the pool mutex, to catch the case where it is
unregistered while the upcall is waiting for the mutex.
Also, move the mtx_destroy() of the pool mutex to after SVC_RELEASE(),
so that it isn't destroyed before the upcalls are disabled.
Reviewed by: dfr, jhb
Tested by: pho
Approved by: kib (mentor)
count of the number of registered policies.
Rather than unconditionally locking sockets before passing them into MAC,
lock them in the MAC entry points only if mac_policy_count is non-zero.
This avoids locking overhead for a number of socket system calls when no
policies are registered, eliminating measurable overhead for the MAC
Framework for the socket subsystem when there are no active policies.
Possibly socket locks should be acquired by policies if they are required
for socket labels, which would further avoid locking overhead when there
are policies but they don't require labeling of sockets, or possibly
don't even implement socket controls.
Obtained from: TrustedBSD Project
- Each socket upcall is now invoked with the appropriate socket buffer
locked. It is not permissible to call soisconnected() with this lock
held; however, so socket upcalls now return an integer value. The two
possible values are SU_OK and SU_ISCONNECTED. If an upcall returns
SU_ISCONNECTED, then the soisconnected() will be invoked on the
socket after the socket buffer lock is dropped.
- A new API is provided for setting and clearing socket upcalls. The
API consists of soupcall_set() and soupcall_clear().
- To simplify locking, each socket buffer now has a separate upcall.
- When a socket upcall returns SU_ISCONNECTED, the upcall is cleared from
the receive socket buffer automatically. Note that a SO_SND upcall
should never return SU_ISCONNECTED.
- All this means that accept filters should now return SU_ISCONNECTED
instead of calling soisconnected() directly. They also no longer need
to explicitly clear the upcall on the new socket.
- The HTTP accept filter still uses soupcall_set() to manage its internal
state machine, but other accept filters no longer have any explicit
knowlege of socket upcall internals aside from their return value.
- The various RPC client upcalls currently drop the socket buffer lock
while invoking soreceive() as a temporary band-aid. The plan for
the future is to add a new flag to allow soreceive() to be called with
the socket buffer locked.
- The AIO callback for socket I/O is now also invoked with the socket
buffer locked. Previously sowakeup() would drop the socket buffer
lock only to call aio_swake() which immediately re-acquired the socket
buffer lock for the duration of the function call.
Discussed with: rwatson, rmacklem
The system hostname is now stored in prison0, and the global variable
"hostname" has been removed, as has the hostname_mtx mutex. Jails may
have their own host information, or they may inherit it from the
parent/system. The proper way to read the hostname is via
getcredhostname(), which will copy either the hostname associated with
the passed cred, or the system hostname if you pass NULL. The system
hostname can still be accessed directly (and without locking) at
prison0.pr_host, but that should be avoided where possible.
The "similar information" referred to is domainname, hostid, and
hostuuid, which have also become prison parameters and had their
associated global variables removed.
Approved by: bz (mentor)
- add FreeBSD implementation of xdrmem_control needed by zfs
- have zfs define xdr_ops using FreeBSD's definition
- remove solaris xdr files from zfs compile
use to identify if the socket is the same one that a cached request
came in on. It is set by nfsrvd_addsock() to a unique value generated
by incrementing an unsigned 64bit static variable for each assignment
and then the value of xp_sockref is tested to see if it is equal to
the value that was saved with the cached reply.
Submitted by: rmacklem
Reviewed by: dfr
Approved by: kib (mentor)
and server. This replaces the RPC implementation of the NFS client and
server with the newer RPC implementation originally developed
(actually ported from the userland sunrpc code) to support the NFS
Lock Manager. I have tested this code extensively and I believe it is
stable and that performance is at least equal to the legacy RPC
implementation.
The NFS code currently contains support for both the new RPC
implementation and the older legacy implementation inherited from the
original NFS codebase. The default is to use the new implementation -
add the NFS_LEGACYRPC option to fall back to the old code. When I
merge this support back to RELENG_7, I will probably change this so
that users have to 'opt in' to get the new code.
To use RPCSEC_GSS on either client or server, you must build a kernel
which includes the KGSSAPI option and the crypto device. On the
userland side, you must build at least a new libc, mountd, mount_nfs
and gssd. You must install new versions of /etc/rc.d/gssd and
/etc/rc.d/nfsd and add 'gssd_enable=YES' to /etc/rc.conf.
As long as gssd is running, you should be able to mount an NFS
filesystem from a server that requires RPCSEC_GSS authentication. The
mount itself can happen without any kerberos credentials but all
access to the filesystem will be denied unless the accessing user has
a valid ticket file in the standard place (/tmp/krb5cc_<uid>). There
is currently no support for situations where the ticket file is in a
different place, such as when the user logged in via SSH and has
delegated credentials from that login. This restriction is also
present in Solaris and Linux. In theory, we could improve this in
future, possibly using Brooks Davis' implementation of variant
symlinks.
Supporting RPCSEC_GSS on a server is nearly as simple. You must create
service creds for the server in the form 'nfs/<fqdn>@<REALM>' and
install them in /etc/krb5.keytab. The standard heimdal utility ktutil
makes this fairly easy. After the service creds have been created, you
can add a '-sec=krb5' option to /etc/exports and restart both mountd
and nfsd.
The only other difference an administrator should notice is that nfsd
doesn't fork to create service threads any more. In normal operation,
there will be two nfsd processes, one in userland waiting for TCP
connections and one in the kernel handling requests. The latter
process will create as many kthreads as required - these should be
visible via 'top -H'. The code has some support for varying the number
of service threads according to load but initially at least, nfsd uses
a fixed number of threads according to the value supplied to its '-n'
option.
Sponsored by: Isilon Systems
MFC after: 1 month
from the vimage project, as per plan established at devsummit 08/08:
http://wiki.freebsd.org/Image/Notes200808DevSummit
Introduce INIT_VNET_*() initializer macros, VNET_FOREACH() iterator
macros, and CURVNET_SET() context setting macros, all currently
resolving to NOPs.
Prepare for virtualization of selected SYSCTL objects by introducing a
family of SYSCTL_V_*() macros, currently resolving to their global
counterparts, i.e. SYSCTL_V_INT() == SYSCTL_INT().
Move selected #defines from sys/sys/vimage.h to newly introduced header
files specific to virtualized subsystems (sys/net/vnet.h,
sys/netinet/vinet.h etc.).
All the changes are verified to have zero functional impact at this
point in time by doing MD5 comparision between pre- and post-change
object files(*).
(*) netipsec/keysock.c did not validate depending on compile time options.
Implemented by: julian, bz, brooks, zec
Reviewed by: julian, bz, brooks, kris, rwatson, ...
Approved by: julian (mentor)
Obtained from: //depot/projects/vimage-commit2/...
X-MFC after: never
Sponsored by: NLnet Foundation, The FreeBSD Foundation
virtualization work done by Marko Zec (zec@).
This is the first in a series of commits over the course
of the next few weeks.
Mark all uses of global variables to be virtualized
with a V_ prefix.
Use macros to map them back to their global names for
now, so this is a NOP change only.
We hope to have caught at least 85-90% of what is needed
so we do not invalidate a lot of outstanding patches again.
Obtained from: //depot/projects/vimage-commit2/...
Reviewed by: brooks, des, ed, mav, julian,
jamie, kris, rwatson, zec, ...
(various people I forgot, different versions)
md5 (with a bit of help)
Sponsored by: NLnet Foundation, The FreeBSD Foundation
X-MFC after: never
V_Commit_Message_Reviewed_By: more people than the patch
The kernel has a special wchan called `lbolt', which is triggered each
second. It doesn't seem to be used a lot and it seems pretty redundant,
because we can specify a timeout value to the *sleep() routines. In an
attempt to eventually remove lbolt, make the NFS/RPC code use a timeout
of `hz' when trying to reconnect.
Only the TTY code (not MPSAFE TTY) and the VFS syncer seem to use lbolt
now.
Reviewed by: attilio, jhb
Approved by: philip (mentor), alfred, dfr
to global hostname and domainname variables. Where necessary, copy
to or from a stack-local buffer before performing copyin() or
copyout(). A few uses, such as in cd9660 and daemon_saver, remain
under-synchronized and will require further updates.
Correct a bug in which a failed copyin() of domainname would leave
domainname potentially corrupted.
MFC after: 3 weeks
provides the correct semantics for flock(2) style locks which are used by the
lockf(1) command line tool and the pidfile(3) library. It also implements
recovery from server restarts and ensures that dirty cache blocks are written
to the server before obtaining locks (allowing multiple clients to use file
locking to safely share data).
Sponsored by: Isilon Systems
PR: 94256
MFC after: 2 weeks
to detect (or load) kernel NLM support in rpc.lockd. Remove the '-k'
option to rpc.lockd and make kernel NLM the default. A user can still
force the use of the old user NLM by building a kernel without NFSLOCKD
and/or removing the nfslockd.ko module.
user-mode lock manager, build a kernel with the NFSLOCKD option and
add '-k' to 'rpc_lockd_flags' in rc.conf.
Highlights include:
* Thread-safe kernel RPC client - many threads can use the same RPC
client handle safely with replies being de-multiplexed at the socket
upcall (typically driven directly by the NIC interrupt) and handed
off to whichever thread matches the reply. For UDP sockets, many RPC
clients can share the same socket. This allows the use of a single
privileged UDP port number to talk to an arbitrary number of remote
hosts.
* Single-threaded kernel RPC server. Adding support for multi-threaded
server would be relatively straightforward and would follow
approximately the Solaris KPI. A single thread should be sufficient
for the NLM since it should rarely block in normal operation.
* Kernel mode NLM server supporting cancel requests and granted
callbacks. I've tested the NLM server reasonably extensively - it
passes both my own tests and the NFS Connectathon locking tests
running on Solaris, Mac OS X and Ubuntu Linux.
* Userland NLM client supported. While the NLM server doesn't have
support for the local NFS client's locking needs, it does have to
field async replies and granted callbacks from remote NLMs that the
local client has contacted. We relay these replies to the userland
rpc.lockd over a local domain RPC socket.
* Robust deadlock detection for the local lock manager. In particular
it will detect deadlocks caused by a lock request that covers more
than one blocking request. As required by the NLM protocol, all
deadlock detection happens synchronously - a user is guaranteed that
if a lock request isn't rejected immediately, the lock will
eventually be granted. The old system allowed for a 'deferred
deadlock' condition where a blocked lock request could wake up and
find that some other deadlock-causing lock owner had beaten them to
the lock.
* Since both local and remote locks are managed by the same kernel
locking code, local and remote processes can safely use file locks
for mutual exclusion. Local processes have no fairness advantage
compared to remote processes when contending to lock a region that
has just been unlocked - the local lock manager enforces a strict
first-come first-served model for both local and remote lockers.
Sponsored by: Isilon Systems
PR: 95247 107555 115524 116679
MFC after: 2 weeks
Removed dead code that assumed that M_TRYWAIT can return NULL; it's not true
since the advent of MBUMA.
Reviewed by: arch
There are ongoing disputes as to whether we want to switch to directly using
UMA flags M_WAITOK/M_NOWAIT for mbuf(9) allocation.
previously conditionally acquired Giant based on debug.mpsafenet. As that
has now been removed, they are no longer required. Removing them
significantly simplifies error-handling in the socket layer, eliminated
quite a bit of unwinding of locking in error cases.
While here clean up the now unneeded opt_net.h, which previously was used
for the NET_WITH_GIANT kernel option. Clean up some related gotos for
consistency.
Reviewed by: bz, csjp
Tested by: kris
Approved by: re (kensmith)
the passed in auth_type is unacceptable to rpcauth_buildheader-
this avoids a null pointer panic. Clean up allocations if this
happens. This also quiets a gcc 4.2 complaint about ussing mheadend
without it being initialized.
Reviewed by: alfred
