illumos/illumos-gate@6b036259816b03625981https://www.illumos.org/issues/8026
zfs_throttle_delay and zfs_throttle_resolution became disused since the new
write throttling mechanism was introduced.
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Approved by: Richard Lowe <richlowe@richlowe.net>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 1 week
illumos/illumos-gate@313ae1e182313ae1e182https://www.illumos.org/issues/8027
dsl_pool_dirty_delta() should not wake up waiters when dp->dp_dirty_total ==
zfs_dirty_data_max, because they wait for dp_dirty_total to fall strictly below
the threshold.
It's probably very rare for that condition to occur, but it's better to have
more accurate code.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Andriy Gapon <avg@FreeBSD.org>
MFC after: 1 week
illumos/illumos-gate@94c2d0eb2294c2d0eb22https://www.illumos.org/issues/7968
spa_sync() iterates over all the dirty dnodes and processes each of them by
calling dnode_sync(). If there are many dirty dnodes (e.g. because we created
or removed a lot of files), the single thread of spa_sync() calling
dnode_sync() can become a bottleneck. Additionally, if many dnodes are dirtied
concurrently in open context (e.g. due to concurrent file creation), the
os_lock will experience lock contention via dnode_setdirty().
The solution is to track dirty dnodes on a multilist_t, and for spa_sync() to
use separate threads to process each of the sublists in the multilist.
On the concurrent file creation microbenchmark, the performance improvement
from dnode_setdirty() is up to 7%. Additionally, the wall clock time spent in
spa_sync() is reduced to 15%-40% of the single-threaded case. In terms of cost/
reward, once the other bottlenecks are addressed, fixing this bug will provide
a medium-large performance gain and require a medium amount of effort to
implement.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@10fbdecb0510fbdecb05https://www.illumos.org/issues/7970
The global tunable zfs_arc_num_sublists_per_state is used by the ARC and
the dbuf cache, and other users are planned. We should change this
tunable to be common to all multilists.
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Reviewed by: Saso Kiselkov <saso.kiselkov@nexenta.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
illumos/illumos-gate@b0c42cd470b0c42cd470https://www.illumos.org/issues/7801
Add *_by_dnode() routines for accessing objects given their
dnode_t *, this is more efficient than accessing the object by
(objset_t *, uint64_t object). This change converts some but
not all of the existing consumers. As performance-sensitive
code paths are discovered they should be converted to use
these routines.
Ported from: 0eef1bde31
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: bzzz77 <bzzz.tomas@gmail.com>
MFC after: 24 days
illumos/illumos-gate@a3905a4592a3905a4592https://www.illumos.org/issues/7869
The issue fixed by this patch is a race condition in the deadlist code.
A thread executing an administrative command that uses
`dsl_deadlist_space_range()` holds the lock of the whole `deadlist_t` to
protect the access of all its entries that the deadlist contains in an
avl tree.
Sync threads trying to insert a new entry in the deadlist
(through `dsl_deadlist_insert()` -> `dle_enqueue()`) do not hold the
deadlist lock at that moment. If the `dle_bpobj` is the empty bpobj (our
sentinel value), we close and reopen it. Between these two operations,
it is possible for the `dsl_deadlist_space_range()` thread to dereference
that bpobj which is `NULL` during that window.
Threads should hold the a deadlist's `dl_lock` when they manipulate its
internal data so scenarios like the one above are avoided. In addition,
threads should also hold the bpobj lock whenever they are allocating the
subobj list of a bpobj, and not just when they actually insert the subobj
to the list. This way we can avoid potential memory leaks.
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Melikov <mail@gmelikov.ru>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Serapheim Dimitropoulos <serapheim@delphix.com>
MFC after: 2 weeks
illumos/illumos-gate@61e255ce7261e255ce72https://www.illumos.org/issues/7793
Background information: This assertion about tx_space_* verifies that we
are not dirtying more stuff than we thought we would. We “need” to know
how much we will dirty so that we can check if we should fail this
transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the
transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() —
typically less than a millisecond), we call dbuf_dirty() on the exact
blocks that will be modified. Once this happens, the temporary
accounting in tx_space_* is unnecessary, because we know exactly what
blocks are newly dirtied; we call dnode_willuse_space() to track this
more exact accounting.
The fundamental problem causing this bug is that dmu_tx_hold_*() relies
on the current state in the DMU (e.g. dn_nlevels) to predict how much
will be dirtied by this transaction, but this state can change before we
actually perform the transaction (i.e. call dbuf_dirty()).
This bug will be fixed by removing the assertion that the tx_space_*
accounting is perfectly accurate (i.e. we never dirty more than was
predicted by dmu_tx_hold_*()). By removing the requirement that this
accounting be perfectly accurate, we can also vastly simplify it, e.g.
removing most of the logic in dmu_tx_count_*().
The new tx space accounting will be very approximate, and may be more or
less than what is actually dirtied. It will still be used to determine
if this transaction will put us over quota. Transactions that are marked
by dmu_tx_mark_netfree() will be excepted from this check. We won’t make
an attempt to determine how much space will be freed by the transaction
— this was rarely accurate enough to determine if a transaction should
be permitted when we are over quota, which is why dmu_tx_mark_netfree()
was introduced in 2014.
We also won’t attempt to give “credit” when overwriting existing blocks,
if those blocks may be freed. This allows us to remove the
do_free_accounting logic in dbuf_dirty(), and associated routines. This
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Brian Behlendorf <behlendorf1@llnl.gov>
Approved by: Robert Mustacchi <rm@joyent.com>
Author: Matthew Ahrens <mahrens@delphix.com>
MFC after: 3 weeks
in the PCM feeder mixer. Without this change a value of 32 channels is
treated like zero, due to using a mask of 0x1f, causing a kernel
assert when trying to playback bitperfect 32-channel audio. Also
update the AWK script which is generating the division tables to
handle more than 18 channels. This commit complements r282650.
MFC after: 3 days
illumos/illumos-gate@1c17160ac51c17160ac5https://www.illumos.org/issues/1300
FreeBSD note: recent FreeBSD was not affected by the issue fixed as the
name cache is completely bypassed when normalization is enabled.
The change is imported for the sake of ZAP infrastructure modifications.
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com>
Author: Kevin Crowe <kevin.crowe@nexenta.com>
MFC after: 3 weeks
considering cache line hits and misses. Put the lock and hash list
glue into the first cache line, put inp_refcount inp_flags inp_socket
into the second cache line.
o On allocation zero out entire structure except the lock and list entries,
including inp_route inp_lle inp_gencnt. When inp_route and inp_lle were
introduced, they were added below inp_zero_size, resulting on not being
cleared after free/alloc. This definitely was a source of bugs with route
caching. Could be that r315956 has just fixed one of them.
The inp_gencnt is reinitialized on every alloc, so it is safe to clear it.
This has been proved to improve TCP performance at Netflix.
Obtained from: rrs
Differential Revision: D10686
The Termios headers <termios.h> and <sys/_termios.h> used sometimes
_POSIX_SOURCE directly to determine if a thing should be exposed to
the user. This circumvented the feature mechanisms of <sys/cdefs.h>.
Submitted by: Sebastian Huber <sebastian.huber@embedded-brains.de>
MFC after: 2 weeks
This brings the AHB support in line with the PCI support - now other "things"
can wrap up the calibration / board data into a firmware blob and have them
probe/attach after the system has finished booting.
Note that this change requires /all/ of the AHB using kernel configurations
to change - so until I drop those changes in, this breaks AHB.
Fear not, I'll do that soon.
TODO:
* the above stuff.
Tested:
* AR9331, carambola 2, loading if_ath / wlan as modules at run time
bhyve was recently sandboxed with capsicum, and needs to be able to
control the CPU sets of its vcpu threads
Reviewed by: emaste, oshogbo, rwatson
MFC after: 2 weeks
Sponsored by: ScaleEngine Inc.
Differential Revision: https://reviews.freebsd.org/D10170
The latest firmware has a number of link related fixes, support for a
new custom card, and the fix for a bug that affected rate limiting on
FreeBSD.
Obtained from: Chelsio Communications
MFC after: 1 week
Sponsored by: Chelsio Communications
An extra copy of the system call gate was added to the default LDT back
in 1996 (r18513 / r18514). However, the ability to run BSD/OS 2.1
i386 binaries under FreeBSD's native ABI is most likely no longer
needed.
Discussed with: kib
In r315866, we introduced a direct read of the 8-bit sromrev field from the
memory mapped SPROM/OTP device. On OTP devices that require 16-bit access
alignment, this read fails, preventing identification of the SPROM layout.
So, let's perform an aligned read of the combined 16-bit sromrev/crc field
instead.
Approved by: adrian (mentor, implicit)
There are two possible ways how crypto callback are called: directly from
caller and deffered from crypto thread.
For outbound packets the direct call chain is the following:
IPSEC_OUTPUT() method -> ipsec[46]_common_output() ->
-> ipsec[46]_perform_request() -> xform_output() ->
-> crypto_dispatch() -> crypto_invoke() -> crypto_done() ->
-> xform_output_cb() -> ipsec_process_done() -> ip[6]_output().
The SA and SP references are held while crypto processing is not finished.
The error handling code wrongly expected that crypto callback always called
from the crypto thread context, and it did references releasing in
xform_output_cb(). But when the crypto callback called directly, in case of
error the error handling code in ipsec[46]_perform_request() also did
references releasing.
To fix this, remove error handling from ipsec[46]_perform_request() and do it
in xform_output() before crypto_dispatch().
MFC after: 10 days
Extend the ino_t, dev_t, nlink_t types to 64-bit ints. Modify
struct dirent layout to add d_off, increase the size of d_fileno
to 64-bits, increase the size of d_namlen to 16-bits, and change
the required alignment. Increase struct statfs f_mntfromname[] and
f_mntonname[] array length MNAMELEN to 1024.
ABI breakage is mitigated by providing compatibility using versioned
symbols, ingenious use of the existing padding in structures, and
by employing other tricks. Unfortunately, not everything can be
fixed, especially outside the base system. For instance, third-party
APIs which pass struct stat around are broken in backward and
forward incompatible ways.
Kinfo sysctl MIBs ABI is changed in backward-compatible way, but
there is no general mechanism to handle other sysctl MIBS which
return structures where the layout has changed. It was considered
that the breakage is either in the management interfaces, where we
usually allow ABI slip, or is not important.
Struct xvnode changed layout, no compat shims are provided.
For struct xtty, dev_t tty device member was reduced to uint32_t.
It was decided that keeping ABI compat in this case is more useful
than reporting 64-bit dev_t, for the sake of pstat.
Update note: strictly follow the instructions in UPDATING. Build
and install the new kernel with COMPAT_FREEBSD11 option enabled,
then reboot, and only then install new world.
Credits: The 64-bit inode project, also known as ino64, started life
many years ago as a project by Gleb Kurtsou (gleb). Kirk McKusick
(mckusick) then picked up and updated the patch, and acted as a
flag-waver. Feedback, suggestions, and discussions were carried
by Ed Maste (emaste), John Baldwin (jhb), Jilles Tjoelker (jilles),
and Rick Macklem (rmacklem). Kris Moore (kris) performed an initial
ports investigation followed by an exp-run by Antoine Brodin (antoine).
Essential and all-embracing testing was done by Peter Holm (pho).
The heavy lifting of coordinating all these efforts and bringing the
project to completion were done by Konstantin Belousov (kib).
Sponsored by: The FreeBSD Foundation (emaste, kib)
Differential revision: https://reviews.freebsd.org/D10439
There are two possible ways how crypto callback are called: directly from
caller and deffered from crypto thread.
For inbound packets the direct call chain is the following:
IPSEC_INPUT() method -> ipsec_common_input() -> xform_input() ->
-> crypto_dispatch() -> crypto_invoke() -> crypto_done() ->
-> xform_input_cb() -> ipsec[46]_common_input_cb() -> netisr_queue().
The SA reference is held while crypto processing is not finished.
The error handling code wrongly expected that crypto callback always called
from the crypto thread context, and it did SA reference releasing in
xform_input_cb(). But when the crypto callback called directly, in case of
error (e.g. data authentification failed) the error handling in
ipsec_common_input() also did SA reference releasing.
To fix this, remove error handling from ipsec_common_input() and do it
in xform_input() before crypto_dispatch().
PR: 219356
MFC after: 10 days
The (eventually) upcoming ath(4) changes will include being able to load
ath(4) devices on the AHB bus (ie the on-die wifi part of the SoC)
as modules.
In order for this to happen, a copy of the calibration data needs to be
copied away before the SPI driver runs or the memory map access hack
won't work.
Now, ideally (!) there'd be some driver that can come up after the MTD
pieces (eg, SPI, NAND, etc) and load into a firmware chunk the calibration
data.
(Or, really really nicely, would be an actual async firmware API that
would lead itself to having a driver schedule a file read - or a raw device
read - to get to the calibration data.)
Now, until all of the above is done - I'm going to perpetuate the layer
breaking atrocity here by simply doing the PCI bus fixup EEPROM/calibration
data hack here. This will work for any AR71xx (and later on, AR231x/AR531x)
device, as well as the handful of QCA MIPS + QCA9880v2 802.11ac boards with
NOR flash.
To use, this goes into the kernel config:
# Enable EEPROM hacks
options AR71XX_ATH_EEPROM
device ar71xx_caldata
device firmware
# This enables the ath_ahb driver (when I commit the change!) to
# pull data out of the firmware hack.
options ATH_EEPROM_FIRMWARE
In the hints file:
# ART calibration data mapping device
hint.ar71xx_caldata.0.at="nexus0"
hint.ar71xx_caldata.0.order=0
# Where the ART is - last 64k in the first 8MB of flash
hint.ar71xx_caldata.0.map.0.ath_fixup_addr=0x1fff0000
hint.ar71xx_caldata.0.map.0.ath_fixup_size=16384
# And now tell the ath(4) driver where to look!
hint.ath.0.eeprom_firmware="ar71xx_caldata.0.map.0.eeprom_firmware"
Tested:
* carambola2, AR933x SoC, using a set of ath and ath_hal modules to load
TODO:
* unify this bit of firmware loading code, as I will definitely need
to include both the PCI bus firmware version (for PCI ID fixups too!)
as well as AHB/on-chip calibration data.
* Commit the ath_ahb bus code
* Convert .. everything over. That'll take the majority of the time.
The textproc/glimpse port expired over 3 years ago because there weren't any
more publicly available distfiles, and because it lacked a maintainer. Remove
the target as it's no longer executable on FreeBSD.
Differential Revision: D10764
MFC after: 1 month
Reviewed by: imp
Sponsored by: Dell EMC Isilon
if it is called on a TCP socket
* with an IPv6 address and the socket is bound to an
IPv4-mapped IPv6 address.
* with an IPv4-mapped IPv6 address and the socket is bound to an
IPv6 address.
Thanks to Jonathan T. Leighton for reporting this issue.
Reviewed by: bz gnn
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D9163
ENA is a networking interface designed to make good use of modern CPU
features and system architectures.
The ENA device exposes a lightweight management interface with a
minimal set of memory mapped registers and extendable command set
through an Admin Queue.
The driver supports a range of ENA devices, is link-speed independent
(i.e., the same driver is used for 10GbE, 25GbE, 40GbE, etc.), and has
a negotiated and extendable feature set.
Some ENA devices support SR-IOV. This driver is used for both the
SR-IOV Physical Function (PF) and Virtual Function (VF) devices.
ENA devices enable high speed and low overhead network traffic
processing by providing multiple Tx/Rx queue pairs (the maximum number
is advertised by the device via the Admin Queue), a dedicated MSI-X
interrupt vector per Tx/Rx queue pair, and CPU cacheline optimized
data placement.
The ENA driver supports industry standard TCP/IP offload features such
as checksum offload and TCP transmit segmentation offload (TSO).
Receive-side scaling (RSS) is supported for multi-core scaling.
The ENA driver and its corresponding devices implement health
monitoring mechanisms such as watchdog, enabling the device and driver
to recover in a manner transparent to the application, as well as
debug logs.
Some of the ENA devices support a working mode called Low-latency
Queue (LLQ), which saves several more microseconds. This feature will
be implemented for driver in future releases.
Submitted by: Michal Krawczyk <mk@semihalf.com>
Jakub Palider <jpa@semihalf.com>
Jan Medala <jan@semihalf.com>
Obtained from: Semihalf
Sponsored by: Amazon.com Inc.
Differential revision: https://reviews.freebsd.org/D10427
Previously open(2) was allowed in capability mode, with a comment that
suggested this was likely the case to facilitate debugging. The system
call would still fail later on, but it's better to disallow the syscall
altogether.
We now have the kern.trap_enotcap sysctl or PROC_TRAPCAP_CTL proccontrol
to aid in debugging.
In any case libc has translated open() to the openat syscall since
r277032.
Reviewed by: kib, rwatson
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D10850
Since netfront uses different locks for the RX and TX paths there's no need to
drop the RX lock before calling if_input.
Suggested by: jhb
Tested by: cperciva
Sponsored by: Citrix Systems R&D
MFC with: r318523
