Drivers can request DMA to buffers that are not in memory represented
in the vm page arrays. Because of this, store KVA of already mapped
buffer to synclist and use it in dma_dcache_sync().
Reviewed by: jah
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D4120
This structure must be binary compatible regardless of PMAP
version being used. Create reserved section for NEW_PMAP to
make other variables be placed exactly in the same memory
addresses. This fixes kgdb/gdb behavoiur, which uses pcb.h stuctures.
The NEW_PMAP is kernel flag, so it does not propagate to the buildworld,
what makes the tools using pcb.h unable to parse PCB data.
Reviewed by: mmel, kib
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4011
Use proper size of exynos_ehci_softc, not the generic one.
Reviewed by: andrew
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4189
Zybo needs its own DTB and has a different PHY, so add it to
the base kernel. Details on building bootable SD images at
http://www.thomasskibo.com/zedbsd/
Submitted By: Thomas Skibo
since it isn't used for my application. Add back the md device since
it's needed for NanoBSD support. Add in many of the small memory
footprint options from the access points.
With these changes we go from having ~8MB to having ~20MB free,
though free + inactive only goes from ~35MB to ~42MB. We can
also boot a nanobsd image mostly (I had to hand tweak what was
built to represent the final goal).
Move the FDT stuff to the top. We're almost ready to pull the trigger
to moving over to FDT, but something in the MCI driver is freaking out
when we do and that needs fixing first.
Allow manipulation with PSR_A bit on ARMv6+.
Remove declaration of unused functions.
This effectively enables asynchronous aborts on early bootstrap stage,
which previously was not enabled due to an error in enable_interrupts().
PR: 201434
Reported by: Gregory Soutade <soutade at gmail.com>
Approved by: kib (mentor)
function which checks an address for privileged (PL1) write access.
The function is inlined so it does not bring any cost, but makes
function set for checking privileged access complete.
Approved by: kib (mentor)
little-endian configuration for 64-bit variant is supported.
Reviewed by: mmel
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D4113
- boot page table is not allocated in data section, so must be
cleared before use
- map only one section (1 MB) for SOCDEV mapping (*)
- DSB must be used for ensuring of finishing TLB operations
- Invalidate BTB when appropriate
PR: 198360
Reported by: Daisuke Aoyama <aoyama at peach.ne.jp> (*)
Approved by: kib (mentor)
as of r288992 use it to manage the CCNT.
Use the CNNT for get_cyclecount() instead of binuptime() when device pmu
is compiled in; if it fails to attach, fall back to the former method.
Enable by default for the BeagleBoneBlack configuration.
Optained from: Cambridge/L41
Sponsored by: DARPA/AFRL
Reviewed by: andrew
Differential Revision: https://reviews.freebsd.org/D3837
variable during mp_start() which is too late. Move this to mp_setmaxid()
where other architectures set it and move x86 assertions to MI code.
Reviewed by: kib (x86 part)
"rmii", use rmii mode for the MAC, otherwise use MII mode. The code is
somewhat duplicated between these drivers for this.
Also, add AT91RM9200 compatibility strings to the ate driver. In the
future, there's a good chance that ate will lose the MACB support and
only attach to the AT91RM9200 EMAC device since the macb works now
that RMII support has been added to it.
driver. This is taken from the MAC at boot, but can be overridden with
'options AT91_MACB_USE_RMII'.
Switch to macb for HL201 and SAM9G20EK boards. It now works both
places. Also start to sneak up on FDT for the SAM9G20EK board, but
leave disabled due to issues with MMC that haven't been resolved.
Add early debug support for the SAM9G20EK since that is required
for FDT to work presently on these SoC.
interrupt status register to process shared interrupts only if the bit
is active and only on core to which they are routed.
Reviewed by: imp, loos
Approved by: kib (mentor)
Differential Revision: https://reviews.freebsd.org/D3723
- Add bcm2835_mbox_property for generic property request, it accepts
pointer to prepared property chan message and its size, forwards
it to MBOX and copies result back
- Make all bcm2835_mbox_XXX functions that use property channel go
through bcm2835_mbox_property path. Do not accept device_t as
an argument, it's not required: all DMA operatiosn should go
through mbox device, and all API consumers should report errors
on their side.
DEX bit is set to 1 and exception raised whenever vectorized operation is
attempted on the VFP implementation that does not support it (i.e. on Cortex A7)
In the old days, device drivers passed NULL for the parent tag when creating
a new tag, and on arm platforms that resulted in a global tag representing
overall platform constraints being substituted in the busdma code. Now all
drivers use bus_get_dma_tag() and if there is a need to represent overall
platform constraints they will be inherited from a tag supplied by nexus or
some bus driver in the hierarchy.
The only arm platforms still relying on the old global-tag scheme were some
xscale boards with special PCI-bus constraints. This change provides those
constraints through a tag supplied by the xscale PCI bus driver, and
eliminates the few remaining references to the old global var.
Reviewed by: cognet
Previous code supported only "continuous" code without any kind of
branch instructions. To change that, new function was implemented
which parses current instruction and returns an addres where
the jump might happen (alternative addr).
mdthread structure was extended to support two breakpoints
(one directly below current instruction and the second placed
at the alternative location).
One of them must trigger regardless the instruction has or has not been
executed due to condition field.
Upon cleanup, both software breakpoints are removed.
This implementation parses only the most common instructions
that are present in the code (like 99.99% of all), but there
is a chance there are some left, not covered by the parsing routine.
Parsing is done only for 32-bit instruction, no Thumb nor Thumb-2
support is provided.
Reviewed by: kib
Submitted by: Wojciech Macek <wma@semihalf.com>
Obtained from: Semihalf
Sponsored by: Juniper Networks Inc.
Differential Revision: https://reviews.freebsd.org/D4021
receives video memory address from VideoCore through property mailbox
channel. Older versions of firmware (and the one that is currently part
of sysutils/u-boot-rpi and sysutils/u-boot-rpi2) returned real physical
address, newer one returns VideoCore bus address, so we need to convert
it to actual physical address. this version works with both older and
newer interface.
point, e.g. on RaspberryPi 2 when control is passed from loader to kernel
it contains garbage. So we use cpsr as a base for new cpsr value: if we
have reached this point it means current value is OK
Reviewed by: andrew
