- Don't allow high-speed mode on OMAP4 due to hardware erratum.
- Check the proper bit in the status register when waiting for the
controller to come out of reset.
- Add handling for the "non-removable" fdt property by always returning
"card is present" status.
- Add the non-removable property for the MMC card on a Beaglebone Black.
- Add the non-removable property for Pandaboard as a workaround.
For Pandaboard the card detect pin is handled by the twl6030 fpga device
which gets an interrupt on pin change and then has to query the fpga
for the actual status. We don't have code to do that yet.
Submitted by: Svatopluk Kraus <onwahe@gmail.com>
This is largely the work from the projects/uefi branch, with some
additional refinements. This is derived from (and replaces) the
original i386 efi implementation; i386 support will be restored later.
Specific revisions of note from projects/uefi:
r247380:
Adjust our load device when we boot from CD under UEFI.
The process for booting from a CD under UEFI involves adding a FAT
filesystem containing your loader code as an El Torito boot image.
When UEFI detects this, it provides a block IO instance that points at
the FAT filesystem as a child of the device that represents the CD
itself. The problem being that the CD device is flagged as a "raw
device" while the boot image is flagged as a "logical partition". The
existing EFI partition code only looks for logical partitions and so
the CD filesystem was rendered invisible.
To fix this, check the type of each block IO device. If it's found to
be a CD, and thus an El Torito boot image, look up its parent device
and add that instead so that the loader will then load the kernel from
the CD filesystem. This is done by using the handle for the boot
filesystem as an alias.
Something similar to this will be required for booting from other
media as well as the loader will live in the EFI system partition, not
on the partition containing the kernel.
r246231:
Add necessary code to hand off from loader to an amd64 kernel.
r246335:
Grab the EFI memory map and store it as module metadata on the kernel.
This is the same approach used to provide the BIOS SMAP to the kernel.
r246336:
Pass the ACPI table metadata via hints so the kernel ACPI code can
find them.
r246608:
Rework copy routines to ensure we always use memory allocated via EFI.
The previous code assumed it could copy wherever it liked. This is not
the case. The approach taken by this code is pretty ham-fisted in that
it simply allocates a large (32MB) buffer area and stages into that,
then copies the whole area into place when it's time to execute. A more
elegant solution could be used but this works for now.
r247214:
Fix a number of problems preventing proper handover to the kernel.
There were two issues at play here. Firstly, there was nothing
preventing UEFI from placing the loader code above 1GB in RAM. This
meant that when we switched in the page tables the kernel expects to
be running on, we are suddenly unmapped and things no longer work. We
solve this by making our trampoline code not dependent on being at any
given position and simply copying it to a "safe" location before
calling it.
Secondly, UEFI could allocate our stack wherever it wants. As it
happened on my PC, that was right where I was copying the kernel to.
This did not cause happiness. The solution to this was to also switch
to a temporary stack in a safe location before performing the final
copy of the loaded kernel.
r246231:
Add necessary code to hand off from loader to an amd64 kernel.
r246335:
Grab the EFI memory map and store it as module metadata on the kernel.
This is the same approach used to provide the BIOS SMAP to the kernel.
r246336:
Pass the ACPI table metadata via hints so the kernel ACPI code can
find them.
r246608:
Rework copy routines to ensure we always use memory allocated via EFI.
The previous code assumed it could copy wherever it liked. This is not
the case. The approach taken by this code is pretty ham-fisted in that
it simply allocates a large (32MB) buffer area and stages into that,
then copies the whole area into place when it's time to execute. A more
elegant solution could be used but this works for now.
r247214:
Fix a number of problems preventing proper handover to the kernel.
There were two issues at play here. Firstly, there was nothing
preventing UEFI from placing the loader code above 1GB in RAM. This
meant that when we switched in the page tables the kernel expects to
be running on, we are suddenly unmapped and things no longer work. We
solve this by making our trampoline code not dependent on being at any
given position and simply copying it to a "safe" location before
calling it.
Secondly, UEFI could allocate our stack wherever it wants. As it
happened on my PC, that was right where I was copying the kernel to.
This did not cause happiness. The solution to this was to also switch
to a temporary stack in a safe location before performing the final
copy of the loaded kernel.
r247216:
Use the UEFI Graphics Output Protocol to get the parameters of the
framebuffer.
Sponsored by: The FreeBSD Foundation
Ensure that first_func is set to 0 on every iteration of the PCI slot
enumeration loop after the first. There is a continue statement that would
cause first_func to stay at 1 any PCI device where slot 0 has no functions
until we find a slot that does have a function. This would cause us to
not enumerate the first PCI function on the device.
Credit to markj@ for spotting the bug.
X-MFC-With: r264011
r247216:
Add the ability for a device to have an "alias" handle.
r247379:
Fix network device registration.
r247380:
Adjust our load device when we boot from CD under UEFI.
The process for booting from a CD under UEFI involves adding a FAT
filesystem containing your loader code as an El Torito boot image.
When UEFI detects this, it provides a block IO instance that points
at the FAT filesystem as a child of the device that represents the CD
itself. The problem being that the CD device is flagged as a "raw
device" while the boot image is flagged as a "logical partition".
The existing EFI partition code only looks for logical partitions and
so the CD filesystem was rendered invisible.
To fix this, check the type of each block IO device. If it's found to
be a CD, and thus an El Torito boot image, look up its parent device
and add that instead so that the loader will then load the kernel from
the CD filesystem. This is done by using the handle for the boot
filesystem as an alias.
Something similar to this will be required for booting from other media
as well as the loader will live in the EFI system partition, not on the
partition containing the kernel.
r247381:
Remove a scatalogical debug printf that crept in.
The 32-bit bootloaders on amd64 now use the 32-bit version in ficl32,
as is done with libstand32. The native 64-bit ficl will be used by the
upcoming UEFI loader.
Sponsored by: The FreeBSD Foundation
3580 Want zvols to return volblocksize when queried for physical block size
illumos/illumos-gate@a0b60564df
It is irrelevant for FreeBSD, just reducing diff.
errors.
Reset the GPIO module during the initialization. This is guaranteed to be
the same as a hardware reset. Tested on AM335x (BBB) and checked against
the omap3 and omap4 TRM.
Do a better job freeing resources when there are errors and on
ti_gpio_detach().
It is an adapted merge from the vendor branch of:
701 UNMAP support for COMSTAR (in part related to ZFS)
2130 zvol DKIOCFREE uses nested DMU transactions
- if TARGET_ARCH is not defined and XDEV_ARCH is defined then early define
TARGET_ARCH to the valud of XDEV_ARCH: This allow the xdev-build target
to be able to correctly chose the compiler it needs to build
- Allow overwriting XDTP to allow a user to not chose where the xdev env will
live in
- Fix build for gcc only xdev (like ia64) by providing the proper -B to the
toolchain and not relying on gcc being installed already in base
- Fix TOOLS_PREFIX so the generated toolchain has the right default sysroot when
installed intead of getting the DESTDIR one
- Fix supporting DESTDIR
- Also overwrite CXX (needed for cross building c++ libraries with clang) and
CPP (needed to cross build some libraries when gcc is the target default
compiler but gcc is not installed on the building host)
Discussed with: imp
We don't know our ARM security state, so one of them will operate.
- Don't set frequency, since it's unpossible in non-secure state.
Only rely on DTS clock-frequency value or get clock from timer.
Discussed with: ian, cognet
From the original OpenBSD commit message:
restore the traditional behavior of -f implying -a; apparently Keith
Bostic forgot to restore it when the -f flag was put back on 2nd of
September 1989, after being removed on 16th of August as a
consequence of issues getting it working over NFS, so deviation from
traditional UNIX behavior in all BSDs looks like an historical
accident; as a side effect, this change accommodates behavior of
this option to IEEE Std 1003.1-2008 (``POSIX.1'').
joint work with jmc@ (who found the inaccuracy in our
implementation), schwarze@ (who provided a detailed tracking of
historical facts) and millert@
Submitted by: Igor Sobrado
Discussed with: mckusick
Obtained from: OpenBSD project
MFC after: 2 weeks
While I'm here, remove aue_eeprom_getword() as its only usage is to
read station address and make it more readable. This change is
inspired by NetBSD.
With this change, aue(4) should work on big endian architectures.
PR: 188177
borrowed where syntax status=noxfer means no transfer statistics
and status=none means no status information at all.
This feature is useful because the statistics information can
sometimes be annoying, and redirecting stderr to /dev/null would
mean error messages also gets silenced.
Obtained from: OpenBSD
MFC after: 2 weeks
This adds the concept of "operating points," combinations of frequency
and voltage at which the cpu is known to work correctly. Some day these
should come from FDT data, but for now the table is hard-coded.
This also allows tuning the min and max operating frequencies. The min
frequency is what the thermal management code will slow down to if the
core temperature gets too high. The max frequency is what gets used if
the temperature is okay.
Normally the max cannot be set higher than the value burned into the
ocotp fuses as the chip's rated max, but there is now a new sysctl+tunable
cpu_overclock_enable; when set to non-zero it allows raising the frequency
above the ocotp value: USE WITH CARE! (At least one of my imx6 boards
has a cpu whose ocotp values never got set correctly; they claim a max
of 792mhz, but the physical markings on the chip say it's good to 1ghz.)
Because all these values affect the entire SoC, there is a new sysctl
node, hw.imx6, where all these values live. The values that are currently
under dev.imx6_anatop.0 should probably move to hw.imx6 too, because
"anatop" doesn't even mean anything to me, let alone to an end user.
Call through to /dev/random synchronously to fill
virtio buffers with RNG data.
Tested with FreeBSD-CURRENT and Ubuntu guests.
Submitted by: Leon Dang
Discussed with: markm
MFC after: 3 weeks
Sponsored by: Nahanni Systems
be used in MI code.
This is intended as a temporary measure to unbreak the build. The real fix
is to write event timer drivers for legacy arm hardware, then get rid of
this option completely. That's going to take a few days.
description was eaten by the dog (or an editor crash or something).
Add variable-frequency support to the arm mpcore eventtimer driver.
This allows a platform's early init code to tell the mpcore driver that the
clock frequency can vary. That causes the mpcore driver to register an
eventtimer, but not a timecounter. The platform has to provide a time
counter using some other fixed-frequency clock, but can still use the
per-cpu goodness of the mpcore hardware for event timers.
When the platform support code does something to change the frequency of
the CPU clocks (power saving, thermal management) it must tell the mpcore
driver code about it using arm_tmr_change_frequency().
register values, then restart the timer. This prevents a situation where
an old event fires just as we're about to load a new value into the timer,
when the start routine is called to change the time of the current event.
Also re-nest the parens properly for casting the result of converting
time and frequency to a count. This doesn't actually change the result of
the calcs, but will some day prevent a loss-of-precision warning on the
assignment, if that warning gets enabled.
few of them also build kern_clocksource.c. That strikes me as insane, but
maybe there's a good reason for it. Until I figure that out, un-break
the build by not referencing functions in kern_clocksource if NO_EVENTTIMERS
is defined.
when WITH_COMPRESSED_IMAGES is used.
Requested by: delphij, brooks, Nikolai Lifanov
MFC After: 1 week
X-MFC-With: r264027,r264028,r264029,r264030
Sponsored by: The FreeBSD Foundation
4248 dtrace(1M) should never create DOF with empty probes section
4249 Only probes from the first DTrace object file will be included
Illumos Revision: 4a20ab41aadcb81c53e72fc65886e964e9add59
Reference:
https://www.illumos.org/issues/4248https://www.illumos.org/issues/4249
Obtained from: Illumos
MFC after: 1 month
causing mb* functions (and similar) to be called with the wrong data
(possibly a null pointer, causing a crash).
PR: standards/188036
MFC after: 1 week
default wMaxPacketSize (64 or 512 bytes). This actually helps older FTDI
devices (which were USB 1/full speed) more than the new H-series high
speed, but even for the new chips it helps cut the number of interrupts
when doing very high speed (3-12mbaud).
