lock may be held.
Kim reported that the TID lock wasn't held when ath_tx_update_clrdmask()
was called. Well, the underlying hardware TXQ for that TID.
I'm betting it's the cabq stuff. ath_tx_xmit_normal() can be called
for both real and software cabq. For software cabq, the real destination
txq is different to the txq. So, the lock check will fail.
Reported by: Kim Culhan <w8hdkim@gmail.com>
"genunix" This will requires us to modify externally created
DTrace scripts but makes logical sense for FreeBSD.
Requested by: rpaulo
MFC after: 2 weeks
offline in response to a INQUIRY command that does not retreive vital
product data(I personally have observed the behaviour on an Adaptec 2405
and a 5805). Force the peripheral qualifier to "connected" so that upper
layers correctly recognize that a disk is present.
This bug was uncovered by r216236. Prior to that fix, aac(4) was
accidentally clearing the peripheral qualifier for all inquiry commands.
This fixes an issue where passthrough devices were not created for
disks behind aac(4) controllers suffering from the bug. I have
verified that if a disk is not present that we still properly detect
that and not create the passthrough device.
Sponsored by: Sandvine Incorporated
MFC after: 1 week
as controlled by kern.random.sys.harvest.swi. SWI harvesting feeds into
the interrupt FIFO and each event is estimated as providing a single bit of
entropy.
Reviewed by: markm, obrien
MFC after: 2 weeks
entries with different security flavors are in the exports(5)
file. For that case, mountd replies with the security flavors
of the last entry and not the correct one for the client host.
This patch fixes that by storing separate copies of the flavors
for each host/net case, plus a default one for the case where
no hosts/nets are specified on an entry in the exports(5) file.
Unlike the patch in the PR, it replies with the security flavors
for the entry instead of merging the security flavors for all
the entries and replying with that.
Tested by: attila.bogar at linguamatics.com
PR: kern/164933
MFC after: 2 weeks
LUNs respectively. This removes a huge number of error messages
from CAM during bus scans.
Copied almost verbatim from mav's commit r237460.
Submitted by: Mike Tancsa <mike at sentex dot net>
MFC after: 3 days
immediately panics on boot with INVARIANTS enabled. The driver already
clearly expects to be able to recurse on this mutex - the main I/O
is always recursing on this lock.
Reported and tested by: Mike Tancsa <mike at sentex dot net>
MFC after: 1 week
This should eventually be unified with ATH_DEBUG() so I can get both
from one macro; that may take some time.
Add some new probes for TX and TX completion.
* use the correct frame status - although the completion descriptor is
the _last_ in the frame/aggregate, the status is currently stored in
the _first_ buffer.
* Print out ath_buf specific fields once, not per descriptor in an ath_buf.
umsX character device returns a read error. Update devd.conf rules
to use "DEVFS" events which are generated after that the umsX
character device node has been created/destroyed, and then there
should be no need for moused to wait up to 10 seconds for umsX to
be ready. Opening umsX should not fail except if the kernel is low
on memory. In that case the user can replug the USB mouse or use
"usbconfig" to reset the device. In case of USB mouse devices,
moused should neither retry to open its character device,
once the first read error has happened. This is an indication
of device detach.
MFC after: 1 week
at r230551.
Also while there, make sense polling use reported for each node separately
instead of reporting accumulated total status.
Submitted by: Barbara <barbara.freebsd@gmail.com> (1)
MFC after: 3 days
it's disabled.
The previous commit to enable CLRDMASK setting didn't do it at all
correctly for non-aggregate sessions - so the CLRDMASK bit would be
cleared and never re-set.
* move ath_tx_update_clrdmask() to be called by functions that setup
descriptors and queue frames to the hardware, rather than scattered
everywhere.
* Force CLRDMASK to be set on all non-aggregate session frames being
transmitted.
* Use ath_tx_normal_comp() now on non-aggregate sessoin frames
that are queued via ath_tx_xmit_normal(). That way the TID hwq is
updated and they can trigger (eventual) filter frame queue resets
and software retransmits.
There's still a bit more work to do in this area to reverse the silly
short-sightedness on my part, however it's likely going to be better
to fix this now than just reverting the patch.
Thanks to people on the freebsd-wireless@ mailing list for promptly
pointing this out.
The following change caused rpc.lockd to exit after startup:
____
libtirpc: be sure to free cl_netid and cl_tp
When creating a client with clnt_tli_create, it uses strdup to copy
strings for these fields if nconf is passed in. clnt_dg_destroy frees
these strings already. Make sure clnt_vc_destroy frees them in the
same way.
____
MFC after: 3 days
Reported by: David Wolfskill
Tested by: David Wolfskill
adapter->dropped_pkts instead of if_ierrors because if_ierrors is
overwritten by hw stats collection.
Submitted by: Andrew Boyer <aboyer@averesystems.com>
Reviewed by: Jack F Vogel <jfv@freebsd.org>
MFC after: 2 weeks
doesn't exist on a dataset we are starting from. For example if we
have the following configuration:
tank
tank/foo
tank/foo@snap
tank/bar
tank/bar@snap
We can execute:
# zfs destroy -t tank@snap
eventhough tank@snap doesn't exit.
Unfortunately it is not possible to do the same with recursive rename:
# zfs rename -r tank@snap tank@pans
cannot open 'tank@snap': dataset does not exist
...until now. This change allows to recursively rename snapshots even if
snapshot doesn't exist on the starting dataset.
Sponsored by: rsync.net
MFC after: 2 weeks
The code builds a map of regions that were freed. On every write the
code consults the map and eventually removes ranges that were freed
before, but are now overwritten.
Freed blocks are not TRIMed immediately. There is a tunable that defines
how many txg we should wait with TRIMming freed blocks (64 by default).
There is a low priority thread that TRIMs ranges when the time comes.
During TRIM we keep in-flight ranges on a list to detect colliding
writes - we have to delay writes that collide with in-flight TRIMs in
case something will be reordered and write will reached the disk before
the TRIM. We don't have to do the same for in-flight writes, as
colliding writes just remove ranges to TRIM.
Sponsored by: multiplay.co.uk
This work includes some important fixes and some improvements obtained
from the zfsonlinux project, including TRIMming entire vdevs on pool
create/add/attach and on pool import for spare and cache vdevs.
Obtained from: zfsonlinux
Submitted by: Etienne Dechamps <etienne.dechamps@ovh.net>
. Fix the threshold for expl(x) where |x| is small.
. Also update the previously incorrect comment to match the
new threshold.
* ld128/s_expl.c:
. Re-order logic in exceptional cases to match the logic used in
other long double functions.
. Fix the threshold for expl(x) where is |x| is small.
. Also update the previously incorrect comment to match the
new threshold.
Submitted by: bde
Approved by: das (mentor)
. Guard a comment from reformatting by indent(1).
. Re-order variables in declarations to alphabetical order.
. Remove a banal comment.
* ld128/s_expl.c:
. Add a comment to point to ld80/s_expl.c for implementation details.
. Move the #define of INTERVAL to reduce the diff with ld80/s_expl.c.
. twom10000 does not need to be volatile, so move its declaration.
. Re-order variables in declarations to alphabetical order.
. Add a comment that describes the argument reduction.
. Remove the same banal comment found in ld80/s_expl.c.
Reviewed by: bde
Approved by: das (mentor)
queues lock is acquired before the page lock is released, there is no
guarantee that the page will still be in that same page queue when
vm_page_requeue() is called.
Reported by: pho
In collaboration with: kib
MFC after: 3 days
Also, update the comment to describe the choice of using
a high and low decomposition of 2^(i/INTERNVAL) for
0 <= i <= INTERVAL in preparation for an implementation of
expm1l.
* Move the #define of INTERVAL above the comment, because the
comment refers to INTERVAL.
Reviewed by: bde
Approved by: das (mentor)
gone rule. Optimise use of channels so that when a channel
is not ready another channel is used. Instead of using the SOF interrupt
use the system timer to drive the host statemachine. This might
give lower throughput and higher latency, but reduces the CPU usage
significantly. The DWC OTG host mode support should not be considered
for serious USB host controller applications. Some problems are still
seen with LOW speed USB devices.
Commit changes missed from r237435. Properly calculate the signal
trampoline addresses after the shared page is enabled. Handle FreeBSD
ABIs without shared page support too.
MFi386: revision 238792
Introduce curpcb magic variable.
builtin is processed specially and thus the `: > file' syntax for example
will cause premature termination of the current shell on redirection-error.
The `true' builtin on the other-hand is not included in this special
processing (for compatibility reasons to satisfy legacy scripts programmed
for systems where `true' is not a builtin).
Change bare `: > file' syntax into `true > file' syntax to prevent premature
shell termination in the event of redirection-error.
NOTE: Instances of `: > file' that appear within a sub-shell have been left
unmodified as these will not cause premature termination of the main script.
Reviewed by: jilles, adrian (co-mentor)
Approved by: adrian (co-mentor)
