Apply authenticated user context after update of wtmp(5) at start of session,
so that ftpd process is not killed by kernel with SIGXFSZ when user has
"filesize" limit lower than size of system wtmp file. Same applies
to session finalization: revert to super-user context before update of wtmp.
If ftpd hits limit while writing a file at user request,
do not get killed with SIGXFSZ instantly but apparently ignore the signal,
process error and report it to the user, and continue with the session.
PR: 143570
Approved by: avg (mentor), mav (mentor)
MFC after: 1 week
If they are still needed, you can find them in the net/bsdrcmds port.
This was proposed June, 20th and approved by various committers [1].
They have been marked as deprecated on CURRENT in r320644 [2] on July, 4th.
Both stable/11 and release/11.1 contain the deprecation notice (thanks to
allanjude@).
Note that ruptime(1)/rwho(1)/rwhod(8) were initially thought to be part of
rcmds but this was a mistake and those are therefore NOT removed.
[1] https://lists.freebsd.org/pipermail/freebsd-arch/2017-June/018239.html
[2] https://svnweb.freebsd.org/base?view=revision&revision=320644
Reviewed by: bapt, brooks
Differential Revision: https://reviews.freebsd.org/D12573
in favor of just rendering the manpage instead of relying on pre-formatted
catpages. Note, this does not impede the ability to use existing catpages,
it just removes the utility to generate them.
Reviewed by: imp, allanjude
Approved by: emaste (mentor)
Differential Revision: https://reviews.freebsd.org/D12317
Newer binutils supports extensions to the MIPS ABI for non-PIC code
that is used when compiling O32 binaries with clang 5 (but not used
for N64 oddly enough). These extensions require support for
R_MIPS_COPY relocations as well as a second PLT GOT using
R_MIPS_JUMP_SLOT relocations.
For R_MIPS_COPY, use the same approach as on other architectures where
fixups are deferred to the MD do_copy_relocations.
The additional PLT GOT for jump slots is located in a .got.plt section
which is identified by a DT_MIPS_PLTGOT dynamic entry. This GOT also
requires fixups for the first two GOT entries just as the normal GOT.
However, the entry point for this second GOT uses a different calling
convention. Rather than passing an offset into the GOT, it passes an
offset into the .rel.plt section. This requires a second entry point
(_rtld_pltbind_start) which calls the normal _rtld_bind() rather than
_mips_rtld_bind(). This also means providing a real version of
reloc_jmpslot() which is used by _rtld_bind().
In addition, add real implementions of reloc_plt() and
reloc_jmpslots() which walk .rel.plt handling R_MIPS_JUMP_SLOT
relocations.
Reviewed by: kib
Sponsored by: DARPA / AFRL
Differential Revision: https://reviews.freebsd.org/D12326
On hard-float 32-bit arm platforms, always search for the soft float
binaries in the alternative locations.
Sponsored by: Netflix
Differential Review: https://reviews.freebsd.org/D12274
MFC After: 1 week
This modification adds a new gettytab(5) option (iM) to specify a
program to run that will generate the initial (banner) message that is
displayed before the login prompt. Such a capability is useful when
dynamic information is needed in the banner message that cannot be
supplied by the set of % substitution sequences available in the "im"
option.
Reviewed by: vangyzen, wblock, manpages
Approved by: vangyzen (mentor)
MFC after: 1 week
Relnotes: yes
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D12108
In particular, the switch statement on the type of dynamic entries
in _rtld_relocate_nonplt_self() needs to not use a jump table since
jump tables on MIPS use local GOT entries which aren't initialized
until after this loop.
Suggested by: arichardson
Reviewed by: emaste
Sponsored by: DARPA / AFRL
Non-tests/... changes:
- Add HAS_TESTS= to Makefiles with libraries and programs to enable iteration
and propagate the appropriate environment down to *.test.mk.
tests/... changes:
- Add appropriate support Makefile.inc's to set HAS_TESTS in a minimal manner,
since tests/... is a special subdirectory tree compared to the others.
MFC after: 2 months
MFC with: r322511
Reviewed by: arch (silence), testing (silence)
Differential Revision: D12014
New version is not compatible on supervisor mode with v1.9.1
(previous version).
Highlights:
o BBL (Berkeley Boot Loader) provides no initial page tables
anymore allowing us to choose VM, to build page tables manually
and enable MMU in S-mode.
o SBI interface changed.
o GENERIC kernel.
FDT is now chosen standard for RISC-V hardware description.
DTB is now provided by Spike (golden model simulator). This
allows us to introduce GENERIC kernel. However, description
for console and timer devices is not provided in DTB, so move
these devices temporary to nexus bus.
o Supervisor can't access userspace by default. Solution is to
set SUM (permit Supervisor User Memory access) bit in sstatus
register.
o Compressed extension is now turned on by default.
o External GCC 7.1 compiler used.
o _gp renamed to __global_pointer$
o Compiler -march= string is now in use allowing us to choose
required extensions (compressed, FPU, atomic, etc).
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11800
o Replace __riscv64 with (__riscv && __riscv_xlen == 64)
This is required to support new GCC 7.1 compiler.
This is compatible with current GCC 6.1 compiler.
RISC-V is extensible ISA and the idea here is to have built-in define
per each extension, so together with __riscv we will have some subset
of these as well (depending on -march string passed to compiler):
__riscv_compressed
__riscv_atomic
__riscv_mul
__riscv_div
__riscv_muldiv
__riscv_fdiv
__riscv_fsqrt
__riscv_float_abi_soft
__riscv_float_abi_single
__riscv_float_abi_double
__riscv_cmodel_medlow
__riscv_cmodel_medany
__riscv_cmodel_pic
__riscv_xlen
Reviewed by: ngie
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D11901
directories to SUBDIR.${MK_TESTS} idiom
This is being done to pave the way for future work (and homogenity) in
^/projects/make-check-sandbox .
No functional change intended.
MFC after: 1 weeks
How network VF works with hn(4) on Hyper-V in non-transparent mode:
- Each network VF has a cooresponding hn(4).
- The network VF and the it's cooresponding hn(4) have the same hardware
address.
- Once the network VF is up, e.g. ifconfig VF up:
o All of the transmission should go through the network VF.
o Most of the reception goes through the network VF.
o Small amount of reception may go through the cooresponding hn(4).
This reception will happen, even if the the cooresponding hn(4) is
down. The cooresponding hn(4) will change the reception interface
to the network VF, so that network layer and application layer will
be tricked into thinking that these packets were received by the
network VF.
o The cooresponding hn(4) pretends the physical link is down.
- Once the network VF is down or detached:
o All of the transmission should go through the cooresponding hn(4).
o All of the reception goes through the cooresponding hn(4).
o The cooresponding hn(4) fallbacks to the original physical link
detection logic.
All these features are mainly used to help live migration, during which
the network VF will be detached, while the network communication to the
VM must not be cut off. In order to reach this level of live migration
transparency, we use failover mode lagg(4) with the network VF and the
cooresponding hn(4) attached to it.
To ease user configuration for both network VF and non-network VF, the
lagg(4) will be created by the following rules, and the configuration
of the cooresponding hn(4) will be applied to the lagg(4) automatically.
Sponsored by: Microsoft
Differential Revision: https://reviews.freebsd.org/D11635
Use the standard syntax of name@version, I do not expect a confusion
due to unlikely possibility of the name containing the '@' character.
Requested by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
Rtld checks and use old MAP_ANON/PROT_NONE method of creating gap if
running on old kernel.
Reviewed by: alc, markj
Tested by: pho, Qualys
Sponsored by: The FreeBSD Foundation
MFC after: 1 week
This hopefully will make atf-sh(3) easier to understand for newcomers,
without having to go through the atf-sh(3) level of indirection.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
I missed the fact that atf-sh(3) already documents atf_check(3). I'll
be adding an manpage link for that instead in the next commit.
MFC after: 1 week
MFC with: r319659
Sponsored by: Dell EMC Isilon
This is being done to make the documentation for atf-check(1) easier to find/more
intuitive for new users, because atf_check is the atf-run(1) shell version of the
standalone atf-check(1) command, which is used in atf-sh(3) test programs.
MFC after: 1 week
Sponsored by: Dell EMC Isilon
Reviewed by: emaste, jonathan (previous version)
Sponsored by: The FreeBSD Foundation
MFC after: 3 days
Differential Revision: https://reviews.freebsd.org/D10826
Fix warnings about redundant declarations in rtld
when libthr in increased to WARNS=6.
Reviewed by: kib
MFC after: 3 days
Sponsored by: Dell EMC
Differential Revision: https://reviews.freebsd.org/D10934
When I originally documented the LD_LIBRARY_PATH_FDS environment variable,
I used `.Ev` rather than `.It Ev` to introduce it; this led to the
documentation being embedded in the previous paragraph (LD_LIBRARY_PATH).
When executing rtld directly, allow a file descriptor to be explicitly
specified rather than opened from the given path. This, together with the
LD_LIBRARY_PATH_FDS environment variable, allows dynamically-linked
applications to be executed from within capability mode.
Also add some rudimentary argument parsing (without pulling in getopt or
the like) to accept this file descriptor, a help (-h) option and a basic
usage string.
Reviewed by: kib
Sponsored by: NSERC, RDC
Differential Revision: https://reviews.freebsd.org/D10751
Do not allow direct exec if we the process is suid. Try to follow Unix
permission checks for DACs, ignore ACLs.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D10750
This is a more accurate name, as the integer doesn't have to be a library
directory descriptor. It is also a prerequisite for more argument parsing
coming in the near future (e.g., parsing explicit binary descriptors).
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: NSERC
Check if passed phdr is actually phdr of the interpreter itself, and
decide that this is the case of direct execution. In this case, the
binary to activate is specified in the argv[1]. After opening it,
shift down on-stack structure with argv, env and aux vectors to
emulate execution of the binary and not of the interpreter.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
Differential revision: https://reviews.freebsd.org/D10701
If the mapped object is linked at specific address, we must obey it.
If AT_EXECFD is not used, only in-kernel ELF image activator needed to
keep the mapping address, since only binaries are linked at the fixed
address, and binaries are mapped by kernel in this case.
Reviewed by: emaste
Sponsored by: The FreeBSD Foundation
MFC after: 2 weeks
X-Differential revision: https://reviews.freebsd.org/D10701
partially sort them by style(9). Move locals declarations from nested
blocks into the block at function start.
Discussed with: emaste
MFC after: 1 week
The locally declared enum of blacklistd actions needs to be
hidden when the soon to be committed changes to libblacklist
are brought into the tree. Fix the type of the "msg" parameter
to match the library.
There should be no functional changes.
MFC after: 3 days
Sponsored by: The FreeBSD Foundation
in place. To do per-cpu stats, convert all fields that previously were
maintained in the vmmeters that sit in pcpus to counter(9).
- Since some vmmeter stats may be touched at very early stages of boot,
before we have set up UMA and we can do counter_u64_alloc(), provide an
early counter mechanism:
o Leave one spare uint64_t in struct pcpu, named pc_early_dummy_counter.
o Point counter(9) fields of vmmeter to pcpu[0].pc_early_dummy_counter,
so that at early stages of boot, before counters are allocated we already
point to a counter that can be safely written to.
o For sparc64 that required a whole dummy pcpu[MAXCPU] array.
Further related changes:
- Don't include vmmeter.h into pcpu.h.
- vm.stats.vm.v_swappgsout and vm.stats.vm.v_swappgsin changed to 64-bit,
to match kernel representation.
- struct vmmeter hidden under _KERNEL, and only vmstat(1) is an exclusion.
This is based on benno@'s 4-year old patch:
https://lists.freebsd.org/pipermail/freebsd-arch/2013-July/014471.html
Reviewed by: kib, gallatin, marius, lidl
Differential Revision: https://reviews.freebsd.org/D10156
locally defined K&R prototypes in .c files; use appropriate casts for
pointer types now that types for arguments are available at compile time.
This ensures that compilers with multiple incompatible calling conventions
can select the correct calling convention for external functions.
Sponsored by: DARPA, AFRL
MFC after: 1 week
Implement a new init(8) option in /etc/ttys. If this option is present
on the entry in /etc/ttys, the entry will be active if and only if it
exists. If the name starts with a '/', it will be considered an
absolute path. If not, it will be a path relative to /dev.
This allows one to turn off video console getty that aren't present
(while running a getty on them even when they aren't the system
console). Likewise with serial ports.
It differs from onifconsole in only requiring the device exist rather
than it be listed as one of the system consoles.
Sponsored by: Netflix
Differential Revision: https://reviews.freebsd.org/D10037
