In particular:
- implement compat shims for old stat(2) variants and ogetdirentries(2);
- implement delivery of signals with ancient stack frame layout and
corresponding sigreturn(2);
- implement old getpagesize(2);
- provide a user-mode trampoline and LDT call gate for lcall $7,$0;
- port a.out image activator and connect it to the build as a module
on amd64.
The changes are hidden under COMPAT_43.
MFC after: 1 month
Introduce the AHB glue for Atheros embedded systems. Right now it's
hard-coded for the AR9130 chip whose support isn't yet in this HAL;
it'll be added in a subsequent commit.
Kernel configuration files now need both 'ath' and 'ath_pci' devices; both
modules need to be loaded for the ath device to work.
Add new RAID GEOM class, that is going to replace ataraid(4) in supporting
various BIOS-based software RAIDs. Unlike ataraid(4) this implementation
does not depend on legacy ata(4) subsystem and can be used with any disk
drivers, including new CAM-based ones (ahci(4), siis(4), mvs(4), ata(4)
with `options ATA_CAM`). To make code more readable and extensible, this
implementation follows modular design, including core part and two sets
of modules, implementing support for different metadata formats and RAID
levels.
Support for such popular metadata formats is now implemented:
Intel, JMicron, NVIDIA, Promise (also used by AMD/ATI) and SiliconImage.
Such RAID levels are now supported:
RAID0, RAID1, RAID1E, RAID10, SINGLE, CONCAT.
For any all of these RAID levels and metadata formats this class supports
full cycle of volume operations: reading, writing, creation, deletion,
disk removal and insertion, rebuilding, dirty shutdown detection
and resynchronization, bad sector recovery, faulty disks tracking,
hot-spare disks. For Intel and Promise formats there is support multiple
volumes per disk set.
Look graid(8) manual page for additional details.
Co-authored by: imp
Sponsored by: Cisco Systems, Inc. and iXsystems, Inc.
Add systrace_linux32 and systrace_freebsd32 modules which provide
support for tracing compat system calls in addition to native system
call tracing provided by systrace module.
Provided that all the systrace modules are loaded now you can select
what syscalls to trace in the following manner:
syscall::xxx:yyy - work on all system calls that match the specification
syscall:freebsd:xxx:yyy - only native system calls
syscall:linux32:xxx:yyy - linux32 compat system calls
syscall:freebsd32:xxx:yyy - freebsd32 compat system calls on amd64
PR: kern/152822
Submitted by: Artem Belevich <fbsdlist@src.cx>
Reviewed by: jhb (earlier version)
MFC after: 3 weeks
Linux ath9k.
The ath9k ar9002_hw_init_cal() isn't entirely clear about what
is supposed to be called for what chipsets, so I'm ignoring the
rest of it and just porting the AR9285 init cal path as-is and
leaving the rest alone. Subsequent commits may also tidy up the
Merlin (AR9285) and other chipset support.
Obtained from: Linux ath9k
generally tidy up the TX power programming code.
Enforce that the TX power offset for Merlin is -5 dBm, rather than
any other value programmable in the EEPROM. This requires some
further code to be ported over from ath9k, so until that is done
and tested, fail to attach NICs whose TX power offset isn't -5
dBm.
This improves both legacy and HT transmission on my merlin board.
It allows for stable MCS TX up to MCS15.
Specifics:
* Refactor out a bunch of the TX power calibration code -
setting/obtaining the power detector / gain boundaries,
programming the PDADC
* Take the -5 dBm TX power offset into account on Merlin -
"0" in the per-rate TX power register means -5 dBm, not
0 dBm
* When doing OLC
* Enforce min (0) and max (AR5416_MAX_RATE_POWER) when fiddling
with the TX power, to avoid the TX power values from wrapping
when low.
* Implement the 1 dBm cck power offset when doing OLC
* Implement temperature compensation for 2.4ghz mode when doing OLC
* Implement an AR9280 specific TX power calibration routine which
includes the OLC twiddles, leaving the earlier chipset path
(AR5416, AR9160) alone
Whilst here, use these refactored routines for the AR9285 TX power
calibration/programming code and enforce correct overflow/underflow
handling when fiddling with TX power values.
Obtained from: linux ath9k
Few new things available from now on:
- Data deduplication.
- Triple parity RAIDZ (RAIDZ3).
- zfs diff.
- zpool split.
- Snapshot holds.
- zpool import -F. Allows to rewind corrupted pool to earlier
transaction group.
- Possibility to import pool in read-only mode.
MFC after: 1 month
The AR5416 and later TX descriptors have new fields for supporting
11n bits (eg 20/40mhz mode, short/long GI) and enabling/disabling
RTS/CTS protection per rate.
These functions will be responsible for initialising the TX descriptors
for the AR5416 and later chips for both HT and legacy frames.
Beacon frames will remain using the non-11n TX descriptor setup for now;
Linux ath9k does much the same.
Note that these functions aren't yet used anywhere; a few more framework
changes are needed before all of the right rate information is available
for TX.
algorithm described in the paper "Improved coexistence and loss tolerance for
delay based TCP congestion control" by Hayes and Armitage. It is implemented as
a kernel module compatible with the recently committed modular congestion
control framework.
CHD enhances the approach taken by the Hamilton-Delay (HD) algorithm to provide
tolerance to non-congestion related packet loss and improvements to coexistence
with loss-based congestion control algorithms. A key idea in improving
coexistence with loss-based congestion control algorithms is the use of a shadow
window, which attempts to track how NewReno's congestion window (cwnd) would
evolve. At the next packet loss congestion event, CHD uses the shadow window to
correct cwnd in a way that reduces the amount of unfairness CHD experiences when
competing with loss-based algorithms.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: bz and others along the way
MFC after: 3 months
algorithm based on the paper "A strategy for fair coexistence of loss and
delay-based congestion control algorithms" by Budzisz, Stanojevic, Shorten and
Baker. It is implemented as a kernel module compatible with the recently
committed modular congestion control framework.
HD uses a probabilistic approach to reacting to delay-based congestion. The
probability of reducing cwnd is zero when the queuing delay is very small,
increasing to a maximum at a set threshold, then back down to zero again when
the queuing delay is high. Normal operation keeps the queuing delay below the
set threshold. However, since loss-based congestion control algorithms push the
queuing delay high when probing for bandwidth, having the probability of
reducing cwnd drop back to zero for high delays allows HD to compete with
loss-based algorithms.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: bz and others along the way
MFC after: 3 months
based on the paper "TCP Vegas: end to end congestion avoidance on a global
internet" by Brakmo and Peterson. It is implemented as a kernel module
compatible with the recently committed modular congestion control framework.
VEGAS uses network delay as a congestion indicator and unlike regular loss-based
algorithms, attempts to keep the network operating with stable queuing delays
and no congestion losses. By keeping network buffers used along the path within
a set range, queuing delays are kept low while maintaining high throughput.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: bz and others along the way
MFC after: 3 months
There's two reasons for this:
* the raw and non-raw TX path shares a lot of duplicate code which should be
refactored;
* the 11n-ready chip TX path needs a little reworking.
Khelp/Hhook KPIs to hook into the TCP stack and maintain a per-connection, low
noise estimate of the instantaneous RTT. ERTT's implementation is robust even in
the face of delayed acknowledgements and/or TSO being in use for a connection.
A high quality, low noise RTT estimate is a requirement for applications such as
delay-based congestion control, for which we will be importing some algorithm
implementations shortly.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: bz and others along the way
MFC after: 3 months
sys/dev/ath/ath_hal/ar5416/ is getting very crowded and further
commits will make it even more crowded. Now is a good time to
shuffle these files out before any more extensive work is done
on them.
Create an ar9003 directory whilst I'm here; ar9003 specific
chipset code will eventually live there.
Compile sys/dev/mem/memutil.c for all supported platforms and remove now
unnecessary dev_mem_md_init(). Consistently define mem_range_softc from
mem.c for all platforms. Add missing #include guards for machine/memdev.h
and sys/memrange.h. Clean up some nearby style(9) nits.
MFC after: 1 month
The controller is commonly found on DM&P Vortex86 x86 SoC. The
driver supports all hardware features except flow control. The
flow control was intentionally disabled due to silicon bug.
DM&P Electronics, Inc. provided all necessary information including
sample board to write driver and answered many questions I had.
Many thanks for their support of FreeBSD.
H/W donated by: DM&P Electronics, Inc.
algorithm based on the Internet-Draft "draft-leith-tcp-htcp-06.txt". It is
implemented as a kernel module compatible with the recently committed modular
congestion control framework.
H-TCP was designed to provide increased throughput in fast and long-distance
networks. It attempts to maintain fairness when competing with legacy NewReno
TCP in lower speed scenarios where NewReno is able to operate adequately. The
paper "H-TCP: A framework for congestion control in high-speed and long-distance
networks" provides additional detail.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: rpaulo (older patch from a few weeks ago)
MFC after: 3 months
algorithm based on the Internet-Draft "draft-rhee-tcpm-cubic-02.txt". It is
implemented as a kernel module compatible with the recently committed modular
congestion control framework.
CUBIC was designed for provide increased throughput in fast and long-distance
networks. It attempts to maintain fairness when competing with legacy NewReno
TCP in lower speed scenarios where NewReno is able to operate adequately. The
paper "CUBIC: A New TCP-Friendly High-Speed TCP Variant" provides additional
detail.
In collaboration with: David Hayes <dahayes at swin edu au> and
Grenville Armitage <garmitage at swin edu au>
Sponsored by: FreeBSD Foundation
Reviewed by: rpaulo (older patch from a few weeks ago)
MFC after: 3 months
