this on the branch.
Original commit message:
Initial bhyve native graphics support.
This adds emulations for a raw framebuffer device, PS2 keyboard/mouse,
XHCI USB controller and a USB tablet.
A simple VNC server is provided for keyboard/mouse input, and graphics
output.
A VGA emulation is included, but is currently disconnected until an
additional bhyve change to block out VGA memory is committed.
Credits:
- raw framebuffer, VNC server, XHCI controller, USB bus/device emulation
and UEFI f/w support by Leon Dang
- VGA, console/g, initial VNC server by tychon@
- PS2 keyboard/mouse jointly done by tychon@ and Leon Dang
- hypervisor framebuffer mem support by neel@
Tested by: Michael Dexter, in a number of revisions of this code.
With the appropriate UEFI image, FreeBSD, Windows and Linux guests can
installed and run in graphics mode using the UEFI/GOP framebuffer.
Approved by: re (gjb)
A couple of minor memory size option related nits:
- use common name 'memsize' (instead of 'max-size' or just 'size')
- bhyve: update usage with memsize unit suffix, drop legacy "MB"
unit
- bhyveload: update usage with memsize unit suffix
- bhyve(8): document default size
- bhyveload(8): use memsize formatting like it's done
in bhyve(8)
Reviewed by: wblock, grehan
Approved by: re (kib), wblock, grehan
Differential Revision: https://reviews.freebsd.org/D6952
if vm_activate_cpu(..) fails when called from fbsdrun_addcpu(..)
MFC after: 1 week
PR: 203884
Reviewed by: grehan
Submitted by: William Orr <will@worrbase.com>
to the qemu one, and uses the same i/o ports but with different
messaging. Requires the 'bootrom' option to be enabled.
This is used by UEFI (and potentially other BIOSs/firmware) to
request information from bhyve. Currently, only the number of
vCPUs is made available, with more to follow.
A very large thankyou to Ben Perrault who helped out testing
an earlier version of this, and bhyve/Windows in general.
Reviewed by: tychon
Discussed with: neel
Sponsored by: Nahanni Systems
devmem is used to represent MMIO devices like the boot ROM or a VESA framebuffer
where doing a trap-and-emulate for every access is impractical. devmem is a
hybrid of system memory (sysmem) and emulated device models.
devmem is mapped in the guest address space via nested page tables similar
to sysmem. However the address range where devmem is mapped may be changed
by the guest at runtime (e.g. by reprogramming a PCI BAR). Also devmem is
usually mapped RO or RW as compared to RWX mappings for sysmem.
Each devmem segment is named (e.g. "bootrom") and this name is used to
create a device node for the devmem segment (e.g. /dev/vmm/testvm.bootrom).
The device node supports mmap(2) and this decouples the host mapping of
devmem from its mapping in the guest address space (which can change).
Reviewed by: tychon
Discussed with: grehan
Differential Revision: https://reviews.freebsd.org/D2762
MFC after: 4 weeks
"sleeping" state. This is done by forcing the vcpu to transition to "idle"
by returning to userspace with an exit code of VM_EXITCODE_REQIDLE.
MFC after: 2 weeks
The default remains localtime for compatibility with the original device model
in bhyve(8). This is required for OpenBSD guests which assume that the RTC
keeps UTC time.
Reviewed by: grehan
Pointed out by: Jason Tubnor (jason@tubnor.net)
MFC after: 2 weeks
Keep track of the next instruction to be executed by the vcpu as 'nextrip'.
As a result the VM_RUN ioctl no longer takes the %rip where a vcpu should
start execution.
Also, instruction restart happens implicitly via 'vm_inject_exception()' or
explicitly via 'vm_restart_instruction()'. The APIs behave identically in
both kernel and userspace contexts. The main beneficiary is the instruction
emulation code that executes in both contexts.
bhyve(8) VM exit handlers now treat 'vmexit->rip' and 'vmexit->inst_length'
as readonly:
- Restarting an instruction is now done by calling 'vm_restart_instruction()'
as opposed to setting 'vmexit->inst_length' to 0 (e.g. emulate_inout())
- Resuming vcpu at an arbitrary %rip is now done by setting VM_REG_GUEST_RIP
as opposed to changing 'vmexit->rip' (e.g. vmexit_task_switch())
Differential Revision: https://reviews.freebsd.org/D1526
Reviewed by: grehan
MFC after: 2 weeks
code. There are only a handful of MSRs common between the two so there isn't
too much duplicate functionality.
The VT-x code has the following types of MSRs:
- MSRs that are unconditionally saved/restored on every guest/host context
switch (e.g., MSR_GSBASE).
- MSRs that are restored to guest values on entry to vmx_run() and saved
before returning. This is an optimization for MSRs that are not used in
host kernel context (e.g., MSR_KGSBASE).
- MSRs that are emulated and every access by the guest causes a trap into
the hypervisor (e.g., MSR_IA32_MISC_ENABLE).
Reviewed by: grehan
VM-exit and ultimately on whether nRIP is valid. This allows us to update
the %rip after the emulation is finished so any exceptions triggered during
the emulation will point to the right instruction.
Don't attempt to handle INS/OUTS VM-exits unless the DecodeAssist capability
is available. The effective segment field in EXITINFO1 is not valid without
this capability.
Add VM_EXITCODE_SVM to flag SVM VM-exits that cannot be handled. Provide the
VMCB fields exitinfo1 and exitinfo2 as collateral to help with debugging.
Provide a SVM VM-exit handler to dump the exitcode, exitinfo1 and exitinfo2
fields in bhyve(8).
Reviewed by: Anish Gupta (akgupt3@gmail.com)
Reviewed by: grehan
change 0 means success and non-zero means failure.
This also helps to eliminate VMEXIT_POWEROFF and VMEXIT_RESET as return values
from VM-exit handlers.
CR: D480
Reviewed by: grehan, jhb
The faulting instruction needs to be restarted when the exception handler
is done handling the fault. bhyve now does this correctly by setting
'vmexit[vcpu].inst_length' to zero so the %rip is not advanced.
A minor complication is that the fault injection APIs are used by instruction
emulation code that is shared by vmm.ko and bhyve. Thus the argument that
refers to 'struct vm *' in kernel or 'struct vmctx *' in userspace needs to
be loosely typed as a 'void *'.
A nested exception condition arises when a second exception is triggered while
delivering the first exception. Most nested exceptions can be handled serially
but some are converted into a double fault. If an exception is generated during
delivery of a double fault then the virtual machine shuts down as a result of
a triple fault.
vm_exit_intinfo() is used to record that a VM-exit happened while an event was
being delivered through the IDT. If an exception is triggered while handling
the VM-exit it will be treated like a nested exception.
vm_entry_intinfo() is used by processor-specific code to get the event to be
injected into the guest on the next VM-entry. This function is responsible for
deciding the disposition of nested exceptions.
similar to -g.)
- Document -U to set the SMBIOS UUID.
- Add missing options to the usage output and to the manpage Synopsis.
- Don't claim that bvmdebug is amd64-only (it is also a device, not an
option).
it implicitly in vmm.ko.
Add ioctl VM_GET_CPUS to get the current set of 'active' and 'suspended' cpus
and display them via /usr/sbin/bhyvectl using the "--get-active-cpus" and
"--get-suspended-cpus" options.
This is in preparation for being able to reset virtual machine state without
having to destroy and recreate it.
the UART FIFO.
The emulation is constrained in a number of ways: 64-bit only, doesn't check
for all exception conditions, limited to i/o ports emulated in userspace.
Some of these constraints will be relaxed in followup commits.
Requested by: grehan
Reviewed by: tychon (partially and a much earlier version)
the legacy 8259A PICs.
- Implement an ICH-comptabile PCI interrupt router on the lpc device with
8 steerable pins configured via config space access to byte-wide
registers at 0x60-63 and 0x68-6b.
- For each configured PCI INTx interrupt, route it to both an I/O APIC
pin and a PCI interrupt router pin. When a PCI INTx interrupt is
asserted, ensure that both pins are asserted.
- Provide an initial routing of PCI interrupt router (PIRQ) pins to
8259A pins (ISA IRQs) and initialize the interrupt line config register
for the corresponding PCI function with the ISA IRQ as this matches
existing hardware.
- Add a global _PIC method for OSPM to select the desired interrupt routing
configuration.
- Update the _PRT methods for PCI bridges to provide both APIC and legacy
PRT tables and return the appropriate table based on the configured
routing configuration. Note that if the lpc device is not configured, no
routing information is provided.
- When the lpc device is enabled, provide ACPI PCI link devices corresponding
to each PIRQ pin.
- Add a VMM ioctl to adjust the trigger mode (edge vs level) for 8259A
pins via the ELCR.
- Mark the power management SCI as level triggered.
- Don't hardcode the number of elements in Packages in the source for
the DSDT. iasl(8) will fill in the actual number of elements, and
this makes it simpler to generate a Package with a variable number of
elements.
Reviewed by: tycho
This has not added a lot of value when debugging bhyve issues while greatly
increasing the time and space required to store the core file.
Passing the "-C" option to bhyve(8) will change the default and dump guest
memory in the core dump.
Requested by: grehan
Reviewed by: grehan
a 'hostcpu'. The new format of the argument string is "vcpu:hostcpu".
This allows pinning a subset of the vcpus if desired.
It also allows pinning a vcpu to more than a single 'hostcpu'.
Submitted by: novel (initial version)
because there isn't a standard way to relay this information to the guest OS.
Add a command line option "-Y" to bhyve(8) to inhibit MPtable generation.
If the virtual machine is using PCI devices on buses other than 0 then it can
still use ACPI tables to convey this information to the guest.
Discussed with: grehan@
to sleep permanently by executing a HLT with interrupts disabled.
When this condition is detected the guest with be suspended with a reason of
VM_SUSPEND_HALT and the bhyve(8) process will exit.
Tested by executing "halt" inside a RHEL7-beta guest.
Discussed with: grehan@
Reviewed by: jhb@, tychon@
the 'HLT' instruction. This condition was detected by 'vm_handle_hlt()' and
converted into the SPINDOWN_CPU exitcode . The bhyve(8) process would exit
the vcpu thread in response to a SPINDOWN_CPU and when the last vcpu was
spun down it would reset the virtual machine via vm_suspend(VM_SUSPEND_RESET).
This functionality was broken in r263780 in a way that made it impossible
to kill the bhyve(8) process because it would loop forever in
vm_handle_suspend().
Unbreak this by removing the code to spindown vcpus. Thus a 'halt' from
a Linux guest will appear to be hung but this is consistent with the
behavior on bare metal. The guest can be rebooted by using the bhyvectl
options '--force-reset' or '--force-poweroff'.
Reviewed by: grehan@
by adding an argument to the VM_SUSPEND ioctl that specifies how the virtual
machine should be suspended, viz. VM_SUSPEND_RESET or VM_SUSPEND_POWEROFF.
The disposition of VM_SUSPEND is also made available to the exit handler
via the 'u.suspended' member of 'struct vm_exit'.
This capability is exposed via the '--force-reset' and '--force-poweroff'
arguments to /usr/sbin/bhyvectl.
Discussed with: grehan@
from any context i.e., it is not required to be called from a vcpu thread. The
ioctl simply sets a state variable 'vm->suspend' to '1' and returns.
The vcpus inspect 'vm->suspend' in the run loop and if it is set to '1' the
vcpu breaks out of the loop with a reason of 'VM_EXITCODE_SUSPENDED'. The
suspend handler waits until all 'vm->active_cpus' have transitioned to
'vm->suspended_cpus' before returning to userspace.
Discussed with: grehan
processor-specific VMCS or VMCB. The pending exception will be delivered right
before entering the guest.
The order of event injection into the guest is:
- hardware exception
- NMI
- maskable interrupt
In the Intel VT-x case, a pending NMI or interrupt will enable the interrupt
window-exiting and inject it as soon as possible after the hardware exception
is injected. Also since interrupts are inherently asynchronous, injecting
them after the hardware exception should not affect correctness from the
guest perspective.
Rename the unused ioctl VM_INJECT_EVENT to VM_INJECT_EXCEPTION and restrict
it to only deliver x86 hardware exceptions. This new ioctl is now used to
inject a protection fault when the guest accesses an unimplemented MSR.
Discussed with: grehan, jhb
Reviewed by: jhb
simplify the implementation of the x2APIC virtualization assist in VT-x.
Prior to this change the vlapic allowed the guest to change its mode from
xAPIC to x2APIC. We don't allow that any more and the vlapic mode is locked
when the virtual machine is created. This is not very constraining because
operating systems already have to deal with BIOS setting up the APIC in
x2APIC mode at boot.
Fix a bug in the CPUID emulation where the x2APIC capability was leaking
from the host to the guest.
Ignore MMIO reads and writes to the vlapic in x2APIC mode. Similarly, ignore
MSR accesses to the vlapic when it is in xAPIC mode.
The default configuration of the vlapic is xAPIC. The "-x" option to bhyve(8)
can be used to change the mode to x2APIC instead.
Discussed with: grehan@
the virtio backends.
- Add a new ioctl to export the count of pins on the I/O APIC from vmm
to the hypervisor.
- Use pins on the I/O APIC >= 16 for PCI interrupts leaving 0-15 for
ISA interrupts.
- Populate the MP Table with I/O interrupt entries for any PCI INTx
interrupts.
- Create a _PRT table under the PCI root bridge in ACPI to route any
PCI INTx interrupts appropriately.
- Track which INTx interrupts are in use per-slot so that functions
that share a slot attempt to distribute their INTx interrupts across
the four available pins.
- Implicitly mask INTx interrupts if either MSI or MSI-X is enabled
and when the INTx DIS bit is set in a function's PCI command register.
Either assert or deassert the associated I/O APIC pin when the
state of one of those conditions changes.
- Add INTx support to the virtio backends.
- Always advertise the MSI capability in the virtio backends.
Submitted by: neel (7)
Reviewed by: neel
MFC after: 2 weeks
hides the setjmp/longjmp semantics of VM enter/exit. vmx_enter_guest() is used
to enter guest context and vmx_exit_guest() is used to transition back into
host context.
Fix a longstanding race where a vcpu interrupt notification might be ignored
if it happens after vmx_inject_interrupts() but before host interrupts are
disabled in vmx_resume/vmx_launch. We now called vmx_inject_interrupts() with
host interrupts disabled to prevent this.
Suggested by: grehan@
- Implement the PM1_EVT and PM1_CTL registers required by ACPI.
The PM1_EVT register is mostly a dummy as bhyve doesn't support any
of the hardware-initiated events. The only bit of PM1_CNT that is
implemented are the sleep request bits (SPL_EN and SLP_TYP) which
request a graceful power off for S5. In particular, for S5, bhyve
exits with a non-zero value which terminates the loop in vmrun.sh.
- Emulate the Reset Control register at I/O port 0xcf9 and advertise
it as the reset register via ACPI.
- Advertise an _S5 package.
- Extend the in/out interface to allow an in/out handler to request
that the hypervisor trigger a reset or power-off.
- While here, note that all vCPUs in a guest support C1 ("hlt").
Reviewed by: neel (earlier version)
state before the requested state transition. This guarantees that there is
exactly one ioctl() operating on a vcpu at any point in time and prevents
unintended state transitions.
More details available here:
http://lists.freebsd.org/pipermail/freebsd-virtualization/2013-December/001825.html
Reviewed by: grehan
Reported by: Markiyan Kushnir (markiyan.kushnir at gmail.com)
MFC after: 3 days
