Every revision of twsi after the A20 have a bug where we need to
write again the control register after each interrupts. We also need
to add some delay before writing to this register, a simple read of the
same register does the job so do that.
Also fix the case when we have finish sending all the bytes, it only worked
for 1 byte transfer (the same kind that we do for talking to the PMIC on A20
boards).
While here add more debug messages and rework some of them.
This was tested by talking to a AT23C32 eeprom and a DS3231 RTC from an
H3 and A20 board.
PR: 247576
Reported by: Manuel Stühn (freebsd@justmail.de)
MFC after: 1 week
This test checks if value received from kvm_read is sane, based on
value returned by sysctl interface.
This should catch regression on bug fixed by r359160
Reviewed by: jhb
Approved by: jhibbits (mentor)
MFC after: 1 week
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D23783
from ChangeLog:
(most of this by rillig@)
o lots of style and white-space cleanup
o lots more unit tests for variable modifiers
o simplified description of some functions
o str.c: refactor Str_Match
o var.c: debugging output for :@
constify VarModify parameter
fix :hash modifier on 16-bit platforms
remove unnecessary forward declarations
refactor ApplyModifier_SysV to have less indentation
simplify code for :E and :R
clean up code for :H and :T
refactor ApplyModifiers
* var.c: we need stdint.h on some platforms to get uint32_t
* unit-test/Makefile: we need to supress the specific error
for RE substitution error in modmisc, since it varies accross
different OS.
On some boards there is a lot of of syscon node that are unused as
more specific drivers is probed before, no need to flood the console
for the mostly-unused generic ones.
MFC after: 1 week
geli does all of its crypto operations in a separate thread pool, so
g_eli_start, g_eli_read_done, and g_eli_write_done don't actually do very
much work. Enabling direct dispatch eliminates the g_up/g_down bottlenecks,
doubling IOPs on my system. This change does not affect the thread pool.
Reviewed by: markj
MFC after: 2 weeks
Sponsored by: Axcient
Differential Revision: https://reviews.freebsd.org/D25587
PR45521: Preserve the value kind when performing a standard
conversion sequence on a glvalue expression.
If the sequence is supposed to perform an lvalue-to-rvalue
conversion, then one will be specified as the first conversion in the
sequence. Otherwise, one should not be invented.
This should fix clang crashing with "can't implicitly cast lvalue to
rvalue with this cast kind", followed by "UNREACHABLE executed at
/usr/src/contrib/llvm-project/clang/lib/Sema/Sema.cpp:538!", when
building recent versions of Ceph, and the CPAN module SYBER/Date-5.2.0.
Reported by: Willem Jan Withagen <wjw@digiware.nl>, eserte12@yahoo.de
PR: 245530, 247812
MFC after: 3 days
This patch uses a slightly different algorithm for the non-ext_pgs case,
where a variable called "mcp" is maintained, pointing to the current
location that mbuf data can be filled into. This avoids use of
mtod(mp, char *) + mp->m_len to calculate the location, since this does
not work for ext_pgs mbufs and I think it makes the algorithm more readable.
This change should not result in semantic changes for the non-ext_pgs case.
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Since ND_EXTPG is never set yet, there is no semantic change at this time.
This was a copy-paste bug in r362902. While here, switch to using
${.TARGET}.
Reported by: Kjell Tore Ullavik <ktullavik@gmail.com>
Reviewed by: kib
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D25585
Small EXAMPLES section showing the use of -s, -k and the different exit values
Approved by: manpages (gbe)
Differential Revision: https://reviews.freebsd.org/D25575
The DIOCGMEDIASIZE is calculated md->md_sectorsize * md->md_provsize, and
for boot disk, the md_sectorsize is 4k. However, the md_provsize is already
in units of bytes.
Sponsored by: Netflix, Klara Inc.
While testing with system default cc set to cubic, and
running a memory exhaustion validation, FreeBSD panics for a
missing inpcb reference / lock.
Reviewed by: rgrimes (mentor), tuexen (mentor)
Approved by: rgrimes (mentor), tuexen (mentor)
MFC after: 3 weeks
Sponsored by: NetApp, Inc.
Differential Revision: https://reviews.freebsd.org/D25583
This version fixes a regression with regard to tradtional behavior of the
non-standard FreeBSD option "-e". In the previous version "-e quit" caused
bc to exit before any computations had been performed, since all -e option
parameters were concatenated and parsed as a whole, with quit causing the
program to exit as soon as it was parsed. This version parses and executes
commands passed with -e one by one and only exits after all prior commands
have been executed.
This commit is not a SVN merge, since the vendor import had been performed
after the import to contrib. Instead the contents of contrib/bc has been
removed and the new version is copied over unchanged from vendor/bc/dist.
This release fixes a regression from traditional bc behavior in FreeBSD
with regard to "-e quit" being passed on the command line and add Spanish
message catalogs.
This is another in the series of commits that add support to the NFS client
and server for building RPC messages in ext_pgs mbufs with anonymous pages.
This is useful so that the entire mbuf list does not need to be
copied before calling sosend() when NFS over TLS is enabled.
Since ND_EXTPG is never set yet, there is no semantic change at this time.
This pattern is used in callbacks with void * data arguments and seems
both relatively uncommon and relatively harmless. Silence the warning
by casting through uintptr_t.
This warning is on by default in Clang 11.
MFC after: 3 days
Sponsored by: DARPA
Differential Revision: https://reviews.freebsd.org/D24425
We cannot complete the interrupt (i.e. write to the claims/complete register
until the interrupt handler has actually run. We don't run the interrupt
handler immediately from intr_isrc_dispatch(), we only schedule it for later
execution.
If we immediately complete it (i.e. before the interrupt handler proper has
run) the interrupt may be triggered again if the interrupt source remains set.
From RISC-V Instruction Set Manual: Volume II: Priviliged Architecture, 7.4
Interrupt Gateways:
"If a level-sensitive interrupt source deasserts the interrupt after the PLIC
core accepts the request and before the interrupt is serviced, the interrupt
request remains present in the IP bit of the PLIC core and will be serviced by
a handler, which will then have to determine that the interrupt device no
longer requires service."
In other words, we may receive interrupts twice.
Avoid that by postponing the completion until after the interrupt handler has
run.
If the interrupt is handled by a filter rather than by scheduling an interrupt
thread we must also complete the interrupt, so set up a post_filter handler
(which is the same as the post_ithread handler).
Reviewed by: mhorne
Sponsored by: Axiado
Differential Revision: https://reviews.freebsd.org/D25531
Now nhop_ref_object() unconditionally acquires a reference, and the new
nhop_try_ref_object() uses refcount_acquire_if_not_zero() to
conditionally acquire a reference. Since the former is cheaper, use it
when we know that the initial counter value is non-zero. No functional
change intended.
Reviewed by: melifaro
Differential Revision: https://reviews.freebsd.org/D25535
This implementation doesn't have any major deviations from the other EFI
ports. I've copied the boilerplate from arm and arm64.
I've tested this with the following boot flows:
OpenSBI (M-mode) -> u-boot (S-mode) -> loader.efi -> FreeBSD
OpenSBI (M-mode) -> u-boot (S-mode) -> boot1.efi -> loader.efi -> FreeBSD
Due to the way that u-boot handles secondary CPUs, OpenSBI >= v0.7 is required,
as the HSM extension is needed to bring them up explicitly. Because of this,
using BBL as the SBI implementation will not be possible. Additionally, there
are a few recent u-boot changes that are required as well, all of which will be
present in the upcoming v2020.07 release.
Looks good: emaste
Differential Revision: https://reviews.freebsd.org/D25135
These system calls already perform validation of their parameters when
called in capability mode, identical to cpuset_(get|set)affinity().
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
cpuset_(get|set)(affinity|domain)(2) permit a get or set of the calling
thread or process' CPU and domain set in capability mode, but only when
the thread or process ID is specified as -1. Extend this to cover the
case where the ID actually matches the caller's TID or PID, since some
code, such as our pthread_attr_get_np() implementation, always provides
an explicit ID.
It was not and still is not permitted to access CPU and domain sets for
other threads in the same process when the process is in capability
mode. This might change in the future.
Submitted by: Greg V <greg@unrelenting.technology> (original version)
MFC after: 1 week
Differential Revision: https://reviews.freebsd.org/D25552
Add a more compact display format for kern.tty_info_kstacks inspired by
procstat -kk. Set it as a default one.
# sysctl kern.tty_info_kstacks=1
kern.tty_info_kstacks: 0 -> 1
# sleep 2
^T
load: 0.17 cmd: sleep 623 [nanslp] 0.72r 0.00u 0.00s 0% 2124k
#0 0xffffffff80c4443e at mi_switch+0xbe
#1 0xffffffff80c98044 at sleepq_catch_signals+0x494
#2 0xffffffff80c982c2 at sleepq_timedwait_sig+0x12
#3 0xffffffff80c43af3 at _sleep+0x193
#4 0xffffffff80c50e31 at kern_clock_nanosleep+0x1a1
#5 0xffffffff80c5119b at sys_nanosleep+0x3b
#6 0xffffffff810ffc69 at amd64_syscall+0x119
#7 0xffffffff810d5520 at fast_syscall_common+0x101
sleep: about 1 second(s) left out of the original 2
^C
# sysctl kern.tty_info_kstacks=2
kern.tty_info_kstacks: 1 -> 2
# sleep 2
^T
load: 0.24 cmd: sleep 625 [nanslp] 0.81r 0.00u 0.00s 0% 2124k
mi_switch+0xbe sleepq_catch_signals+0x494 sleepq_timedwait_sig+0x12
sleep+0x193 kern_clock_nanosleep+0x1a1 sys_nanosleep+0x3b
amd64_syscall+0x119 fast_syscall_common+0x101
sleep: about 1 second(s) left out of the original 2
^C
Suggested by: avg
Reviewed by: mjg
Relnotes: yes
Sponsored by: Mysterious Code Ltd.
Differential Revision: https://reviews.freebsd.org/D25487
Otherwise the same checks are duplicated across four different system
call implementations, cpuset_(get|set)(affinity|domain)(). No
functional change intended.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
* Only read the DPCPU pointer once per xive_dispatch call.
* Optimize HE decoding for the common cases.
Reported by: jhibbits (in irc)
Reviewed by: jhibbits
Sponsored by: Tag1 Consulting, Inc.
Differential Revision: https://reviews.freebsd.org/D25545
- Get rid of the ifl_vm_addrs array. It is not used by any existing
consumer, so we are just dirtying a couple of cache lines for no
reason.
- Use uma_zalloc(fl->ifl_zone) instead of m_cljget(). Otherwise
m_cljget() is doing unnecessary work to look up the correct zone, when
iflib already knows what that zone is.
- ifl_gen is only used when INVARIANTS is on, so make that more clear.
- Fix some style nits and inconsistencies.
Reviewed by: gallatin
Tested by: pho
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25490
When refilling an rx freelist, make sure we only update the hardware
producer index if at least one cluster was allocated. Otherwise the
NIC is programmed to write a previously used cluster, typically
resulting in a use-after-free when packet data is written by the
hardware.
Also make sure that we don't update the fragment index cursor if the
last allocation attempt didn't succeed. For at least Intel drivers,
iflib assumes that the consumer index and fragment index cursor stay in
lockstep, but this assumption was violated in the face of cluster
allocation failures.
Reported and tested by: pho
Reviewed by: gallatin, hselasky
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D25489
In the last IFUNC related changes to rtld, the code that handled non-PLT
GNU IFUNC relocations ended up getting lost. This could leave some
relocations unhandled, causing crashes or misbehavior. This change restores
the handling of these relocations, but now together with the other IFUNC
relocations, allowing resolvers to reference external symbols.
Reviewed by: kib
MFC after: 2 weeks
Sponsored by: Eldorado Research Institute (eldorado.org.br)
Differential Revision: https://reviews.freebsd.org/D25550
The manual page documents "\$" to expand to either "$" or "#" followed by
a single space. In reality, the single space character is not appended.
PR: 247791
Submitted by: kd-dev@pm.me
MFC after: 7 days
