Commit Graph

255113 Commits

Author SHA1 Message Date
Michal Meloun
e62f770bca Add a driver for FAN53555 based PMIC. 2020-12-04 15:23:43 +00:00
Kyle Evans
2756e13843 gnu: don't build libgnuregex for WITH_GNU_GREP_COMPAT
bsdgrep switched over to libregex back in r363823 to fill
WITH_GNU_GREP_COMPAT, since libgnuregex in base is quite buggy and libregex
is somewhat functional. Don't build libgnuregex on our account, please.
2020-12-04 15:21:12 +00:00
Michal Meloun
81359d594f Add a driver for HYM8563 based RTC. 2020-12-04 15:09:42 +00:00
Michal Meloun
4388c70c08 Add a driver for ACT8846 used as PMIC for RK3288 SoC. 2020-12-04 14:57:12 +00:00
Hans Petter Selasky
454f1fdec1 Add more macros, types and prototypes for building kernel code into bootloaders.
MFC after:	1 week
Sponsored by:	Mellanox Technologies // NVIDIA Networking
2020-12-04 14:52:41 +00:00
Hans Petter Selasky
1784a6d64a Fix definition of int64_t and uint64_t when long is 64-bit. This gets the kernel
shim code in line with the rest of the kernel, sys/x86/include/_types.h.

MFC after:	1 week
Sponsored by:	Mellanox Technologies // NVIDIA Networking
2020-12-04 14:50:55 +00:00
Richard Scheffenegger
0e1d7c25c5 Add TCP feature Proportional Rate Reduction (PRR) - RFC6937
PRR improves loss recovery and avoids RTOs in a wide range
of scenarios (ACK thinning) over regular SACK loss recovery.

PRR is disabled by default, enable by net.inet.tcp.do_prr = 1.
Performance may be impeded by token bucket rate policers at
the bottleneck, where net.inet.tcp.do_prr_conservate = 1
should be enabled in addition.

Submitted by:	Aris Angelogiannopoulos
Sponsored by:	NetApp, Inc.
Differential Revision:	https://reviews.freebsd.org/D18892
2020-12-04 11:29:27 +00:00
Kyle Evans
34af05ead3 kern: soclose: don't sleep on SO_LINGER w/ timeout=0
This is a valid scenario that's handled in the various protocol layers where
it makes sense (e.g., tcp_disconnect and sctp_disconnect). Given that it
indicates we should immediately drop the connection, it makes little sense
to sleep on it.

This could lead to panics with INVARIANTS. On non-INVARIANTS kernels, this
could result in the thread hanging until a signal interrupts it if the
protocol does not mark the socket as disconnected for whatever reason.

Reported by:	syzbot+e625d92c1dd74e402c81@syzkaller.appspotmail.com
Reviewed by:	glebius, markj
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D27407
2020-12-04 04:39:48 +00:00
Alexander V. Chernikov
df9053920f Add IPv4/IPv6 rtentry prefix accessors.
Multiple consumers like ipfw, netflow or new route lookup algorithms
 need to get the prefix data out of struct rtentry.
Instead of providing direct access to the rtentry, create IPv4/IPv6
 accessors to abstract struct rtentry internals and avoid including
 internal routing headers for external consumers.

While here, move struct route_nhop_data to the public header, so external
 customers can actually use lookup functions returning rt&nhop data.

Differential Revision:	https://reviews.freebsd.org/D27416
2020-12-03 22:23:57 +00:00
John Baldwin
0082e479ef Clear TLS offload mode if a TLS socket hangs without receiving data.
By default, if a TOE TLS socket stops receiving data for more than 5
seconds, revert the connection back to plain TOE mode.  This provides
a fallback if the userland SSL library does not support KTLS.  In
addition, for client TLS 1.3 sockets using connect(), the TOE socket
blocks before the handshake has completed since the socket option is
only invoked for the final handshake.

The timeout defaults to 5 seconds, but can be changed at boot via the
hw.cxgbe.toe.tls_rx_timeout tunable or for an individual interface via
the dev.<nexus>.toe.tls_rx_timeout sysctl.

Reviewed by:	np
MFC after:	2 weeks
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D27470
2020-12-03 22:06:08 +00:00
Navdeep Parhar
180c2dca4e cxgbe(4): Fix vertical alignment in sysctl_cpl_stats.
MFC after:	3 days
Sponsored by:	Chelsio Communications
2020-12-03 22:04:23 +00:00
John Baldwin
99963f5343 Don't transmit mbufs that aren't yet ready on TOE sockets.
This includes mbufs waiting for data from sendfile() I/O requests, or
mbufs awaiting encryption for KTLS.

Reviewed by:	np
MFC after:	2 weeks
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D27469
2020-12-03 22:01:13 +00:00
Navdeep Parhar
dbc5c85c66 cxgbe(4): two new debug sysctls.
dev.<nexus>.<instance>.misc.tid_stats
dev.<nexus>.<instance>.misc.tnl_stats

MFC after:	3 days
Sponsored by:	Chelsio Communications
2020-12-03 22:00:41 +00:00
John Baldwin
a42f096821 Clear TLS offload mode for unsupported cipher suites and versions.
If TOE TLS is requested for an unsupported cipher suite or TLS
version, disable TLS processing and fall back to plain TOE.  In
addition, if an error occurs when saving the decryption keys in the
card's memory, disable TLS processing and fall back to plain TOE.

Reviewed by:	np
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D27468
2020-12-03 21:59:47 +00:00
John Baldwin
05d5675520 Fix downgrading of TOE TLS sockets to plain TOE.
If a TOE TLS socket ends up using an unsupported TLS version or
ciphersuite, it must be downgraded to a "plain" TOE socket with TLS
encryption/decryption performed on the host.  The previous
implementation of this fallback was incomplete and resulted in hung
connections.

Reviewed by:	np
MFC after:	2 weeks
Sponsored by:	Chelsio Communications
Differential Revision:	https://reviews.freebsd.org/D27467
2020-12-03 21:49:20 +00:00
Navdeep Parhar
ca93db7931 Fix typo in kern_testfrwk.9. 2020-12-03 21:38:00 +00:00
Dimitry Andric
c3f7be36e8 Merge commit d989ffd10 from llvm git (by Dimitry Andric):
Implement computeHostNumHardwareThreads() for FreeBSD

  This retrieves CPU affinity via FreeBSD's cpuset(2) API, and makes
  LLVM respect affinity settings configured by the user via the
  cpuset(1) command.

  In particular, this allows to reduce the number of threads used on
  machines with high core counts, which can interact badly with
  parallelized build systems. This is particularly noticable with lld,
  which spawns lots of threads even for linking e.g. hello_world!

  This fix is related to PR48193, but does not adress the more
  fundamental problem, which is that LLVM by default grabs as many CPUs
  and/or threads as possible.

  Reviewed By: MaskRay

  Differential Revision: https://reviews.llvm.org/D92271

Originally by:	mjg
MFC after:	1 week
2020-12-03 19:29:18 +00:00
Dimitry Andric
5cc6cb2645 Revert r367815, so we can apply the slightly different version that
landed upstream:

For llvm's internal function which retrieves the number of available
"hardware threads", use cpuset_getaffinity(2) on FreeBSD, so it will
honor processor sets configured by the cpuset(1) command.

This should make it possible to avoid e.g. lld creating a huge number of
threads on a machine with many cores, even for linking simple programs.

This will also be submitted upstream.

Submitted by:	mjg
2020-12-03 19:26:21 +00:00
Mark Johnston
b957b18594 Always use 64-bit physical addresses for dump_avail[] in minidumps
As of r365978, minidumps include a copy of dump_avail[].  This is an
array of vm_paddr_t ranges.  libkvm walks the array assuming that
sizeof(vm_paddr_t) is equal to the platform "word size", but that's not
correct on some platforms.  For instance, i386 uses a 64-bit vm_paddr_t.

Fix the problem by always dumping 64-bit addresses.  On platforms where
vm_paddr_t is 32 bits wide, namely arm and mips (sometimes), translate
dump_avail[] to an array of uint64_t ranges.  With this change, libkvm
no longer needs to maintain a notion of the target word size, so get rid
of it.

This is a no-op on platforms where sizeof(vm_paddr_t) == 8.

Reviewed by:	alc, kib
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D27082
2020-12-03 17:12:31 +00:00
Mark Johnston
7be2770a42 sdt: Create providers and probes in separate passes when loading sdt.ko
The sdt module's load handler iterates over SDT linker sets for the
kernel and all loaded modules to create probes and providers defined by
SDT(9).  Probes in one module may belong to a provider in a different
module, but when a probe is created we assume that the provider is
already defined.  To maintain this invariant, modify the load handler to
perform two separate passes over loaded modules: one to define providers
and the other to define probes.

The problem manifests when loading linux.ko, which depends on
linux_common.ko, which defines providers used by probes defined in
linux.ko.

Reported by:	gallatin
MFC after:	2 weeks
Sponsored by:	The FreeBSD Foundation
2020-12-03 17:10:00 +00:00
Adrian Chadd
94e3e7d2e8 [axgbe] Fix compiler warnings in gcc-6.3; perhaps fix a PHY issue
* uninitialised variable use
* Using AXGBE_SET_ADV() where it was intended; using AXGBE_ADV()
  seems wrong and also causes a compiler warning.

Reviewed by:	rpokala
Differential Revision:	  https://reviews.freebsd.org/D26839
2020-12-03 16:54:59 +00:00
Ed Maste
67b94fc58e addr2line: fix allocation leak in error path
CID:		1437677
Reported by:	Coverity Scan
Sponsored by:	The FreeBSD Foundation
2020-12-03 14:41:11 +00:00
Andriy Gapon
b946eede04 dtrace: honor LC_NUMERIC for %'d and alike, and LC_TIME for %T
Note that the public documentation on dtrace.org fails to mention %T and
incorrectly documents %Y.  The latter actually uses format "%Y %b %e %T"
where %b is always in C locale.

Discussed with:	markj
MFC after:	1 month
Sponsored by:	Panzura
2020-12-03 11:59:40 +00:00
Emmanuel Vadot
3e5cd548af if_dwc: Honor snps,pbl property
DTS node can have this property which configure the burst length
for both TX and RX if it's the same.
This unbreak if_dwc on Allwinner A20 and possibly other boards that
uses this prop.

Reported by:	qroxana <qroxana@mail.ru>
2020-12-03 11:15:49 +00:00
Navdeep Parhar
8eba75ed68 cxgbe(4): Stop but don't free netmap queues when netmap is switched off.
It is common for freelists to be starving when a netmap application
stops.  Mailbox commands to free queues can hang in such a situation.
Avoid that by not freeing the queues when netmap is switched off.
Instead, use an alternate method to stop the queues without releasing
the context ids.  If netmap is enabled again later then the same queue
is reinitialized for use.  Move alloc_nm_rxq and txq to t4_netmap.c
while here.

MFC after:	1 week
Sponsored by:	Chelsio Communications
2020-12-03 08:30:29 +00:00
Cy Schubert
feb01b72ef Remove trailing whitespace.
MFC after:	1 week
2020-12-03 05:49:59 +00:00
Oleksandr Tymoshenko
18ce865a4f Add support for hw.physmem tunable for ARM/ARM64/RISC-V platforms
hw.physmem tunable allows to limit number of physical memory available to the
system. It's handled in machdep files for x86 and PowerPC. This patch adds
required logic to the consolidated physmem management interface that is used by
ARM, ARM64, and RISC-V.

Submitted by:	Klara, Inc.
Reviewed by:	mhorne
Sponsored by:	Ampere Computing
Differential Revision:	https://reviews.freebsd.org/D27152
2020-12-03 05:39:27 +00:00
Brandon Bergren
3de50be851 [PowerPC64LE] Fix LE VSX/fpr interop
In the PCB struct, we need to match the VSX register file layout
correctly, as the VSRs shadow the FPRs.

In LE, we need to have a dword of padding before the fprs so they end up
on the correct side, as the struct may be manipulated by either the FP
routines or the VSX routines.

Additionally, when saving and restoring fprs, we need to explicitly target
the fpr union member so it gets offset correctly on LE.

Fixes weirdness with FP registers in VSX-using programs (A FPR that was
saved by the FP routines but restored by the VSX routines was becoming 0
due to being loaded to the wrong side of the VSR.)

Original patch by jhibbits.

Reviewed by:	jhibbits
Differential Revision:	https://reviews.freebsd.org/D27431
2020-12-03 01:39:59 +00:00
Gleb Smirnoff
3921dc1304 Fix r368197: suppress error printing for the "check" command.
Reviewed by:	kevans
2020-12-02 21:53:28 +00:00
Mitchell Horne
1c5d066a72 uart: allow UART_DEV_DBGPORT for fdt consoles
Allow fdt devices to be used as debug ports for gdb(4).

A debug console can be specified with the "freebsd,debug-path" property
in the device tree's /chosen node, or using the environment variable
hw.fdt.dbgport.

The device should be specified by its name in the device tree, for
example hw.fdt.dbgport="serial2".

PR:		251053
Submitted by:	Dmitry Salychev <dsl@mcusim.org>
Submitted by:   stevek (original patch, D5986)
Reviewed by:	andrew, mhorne
Differential Revision:	https://reviews.freebsd.org/D27422
2020-12-02 21:01:52 +00:00
Navdeep Parhar
f42f3b2955 cxgbe(4): Revert r367917.
r367917 fixed the backpressure on the netmap rxq being stopped but that
doesn't help if some other netmap rxq is starved (because it is stopping
too although the driver doesn't know this yet) and blocks the pipeline.
An alternate fix that works in all cases will be checked in instead.

Sponsored by:	Chelsio Communications
2020-12-02 20:54:03 +00:00
Ed Maste
55e6cbc4d0 crashinfo: Add references to the gdb port/package
We intend to remove the obsolete GDB 6.1.1 from FreeBSD before FreeBSD 13.

Reviewed by	jhb
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D27447
2020-12-02 19:58:50 +00:00
Mitchell Horne
a3cd24398a em: fix a null de-reference in em_free_pci_resources
A failure in iflib_device_register() can result in
em_free_pci_resources() being called after receive queues have already
been freed. In particular, a failure to allocate IRQ resources will goto
fail_queues, where IFDI_QUEUES_FREE() will be called via
iflib_tx_structures_free(), preceding the call to IFDI_DETACH().

Cope with this by checking adapter->rx_queues before dereferencing it.
A similar check is present in ixgbe(4) and ixl(4).

MFC after:	1 week
Sponsored by:	NetApp, Inc.
Sponsored by:	Klara, Inc.
Differential Revision:	https://reviews.freebsd.org/D27260
2020-12-02 17:37:32 +00:00
Ed Maste
f4d6ed9a5c addr2line: rework check_range conditions
Simplify logic and reduce indentation for DW_AT_low_pc case.

Reviewed by:	Tiger Gao, markj
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D27426
2020-12-02 17:22:29 +00:00
Michal Meloun
8f9d5a8dbf NVME: Multiple busdma related fixes.
- in nvme_qpair_process_completions() do dma sync before completion buffer
  is used.
- in nvme_qpair_submit_tracker(), don't do explicit wmb() also for arm
  and arm64. Bus_dmamap_sync() on these architectures is sufficient to ensure
  that all CPU stores are visible to external (including DMA) observers.
- Allocate completion buffer as BUS_DMA_COHERENT. On not-DMA coherent systems,
  buffers continuously owned (and accessed) by DMA must be allocated with this
  flag. Note that BUS_DMA_COHERENT flag is no-op on DMA coherent systems
  (or coherent buses in mixed systems).

MFC after:	4 weeks
Reviewed by:	mav, imp
Differential Revision: https://reviews.freebsd.org/D27446
2020-12-02 16:54:24 +00:00
Mark Johnston
ecce515d54 rtsold: Fix bugs reported by Coverity
- Avoid leaking a socket if llflags_get() fails.
- Avoid leaking a file handle if rtsold_init_dumpfile() fails.
- Tighten the check in if_nametosdl() which determines whether we failed
  to find the specified interface.
- Fix errno handling in an error path in rtsock_open().

MFC after:	1 week
2020-12-02 16:46:45 +00:00
Kristof Provost
e997614fd2 pf tests: Test case for bug #251414
Changing a table from not having counters to having counters (or vice versa)
may trigger panics.

PR:		251414
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D27441
2020-12-02 16:33:23 +00:00
Mark Johnston
e6aed06fdf pf: Fix table entry counter toggling
When updating a table, pf will keep existing table entry structures
corresponding to addresses that are in both of the old and new tables.
However, the update may also enable or disable per-entry counters which
are allocated separately.  Thus when toggling PFR_TFLAG_COUNTERS, the
entries may be missing counters or may have unused counters allocated.

Fix the problem by modifying pfr_ina_commit() to transfer counters
from or to entries in the shadow table.

PR:		251414
Reported by:	sigsys@gmail.com
Reviewed by:	kp
MFC after:	1 week
Sponsored by:	The FreeBSD Foundation
Differential Revision:	https://reviews.freebsd.org/D27440
2020-12-02 16:01:43 +00:00
Chuck Tuffli
8d08cdc721 nvme: Fix typo in definition
Change occurrences of "selt test" to "self tests in the NVMe header
file.

Reviewed by:	imp, mav
MFC after:	1 week
Differential Revision: https://reviews.freebsd.org/D27439
2020-12-02 15:59:08 +00:00
Toomas Soome
0410385580 vt/fonts: fix typo
add missing 'is'.

Reported by:	bcr
2020-12-02 09:42:02 +00:00
Michal Meloun
d06e999c2a Fix r368153. Wrong branch of #ifdef __ARMEB__ was deleted. 2020-12-02 08:14:56 +00:00
Alan Somers
23693bd8f3 AIO tests: update expected failure messages after r368265
PR:		220398, 251515
MFC after:	1 week
MFC-With:	r368265
2020-12-02 00:53:03 +00:00
Mateusz Guzik
10e64782ed select: make sure there are no wakeup attempts after selfdfree returns
Prior to the patch returning selfdfree could still be racing against doselwakeup
which set sf_si = NULL and now locks stp to wake up the other thread.

A sufficiently unlucky pair can end up going all the way down to freeing
select-related structures before the lock/wakeup/unlock finishes.

This started manifesting itself as crashes since select data started getting
freed in r367714.
2020-12-02 00:48:15 +00:00
Konstantin Belousov
013a1ae66e Fix syntax 2020-12-01 23:51:48 +00:00
Rick Macklem
00c8b28c1a Improve man page for AmazonEFS mounts.
PR#250770 was actually just a misunderstanding of what
NFS mount options are needed for AmazonEFS mounts.
This patch attempts to clarify the manpage to clarify this.

This is a content change.

PR:		250770
Reviewed by:	bcr
MFC after:	1 week
Differential Revision:	https://reviews.freebsd.org/D27430
2020-12-01 23:33:10 +00:00
John-Mark Gurney
4102e8385f add documentation that the rules need to be reloaded, and how to do it...
MFC after:	1 week
2020-12-01 23:25:21 +00:00
Toomas Soome
cd56ababd3 ficl: make dump a bit friendlier
would be nice to have dump to output hex and ascii.
2020-12-01 23:07:05 +00:00
Konstantin Belousov
6814c2dac5 lio_listio(2): send signal even if number of jobs is zero.
Right now, if lio registered zero jobs, syscall frees lio job
structure, cleaning up queued ksi.  As result, the realtime signal is
dequeued and never delivered.

Fix it by allowing sendsig() to copy ksi when job count is zero.

PR: 220398
Reported and reviewed by:	asomers
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
Differential revision:	https://reviews.freebsd.org/D27421
2020-12-01 22:53:33 +00:00
Konstantin Belousov
2933165666 vfs_aio.c: style.
Mostly re-wrap conditions to split after binary ops.

Reviewed by:	asomers
Sponsored by:	The FreeBSD Foundation
MFC after:	1 week
Differential revision:	https://reviews.freebsd.org/D27421
2020-12-01 22:46:51 +00:00
Konstantin Belousov
24f10b03a1 Fix syntax 2020-12-01 22:44:23 +00:00