1646 (radacct), but RFC's 2138 and 2139 define new ports
for RADIUS and RADIUS accounting, namely 1812 and 1813
respectively. FreeBSD 2.2.6 uses the old radacct port, but
the new radius port, which is a bit silly.
PR: 6712
Reviewed by: phk
Submitted by: Nick Hilliard <nick@foobar.org>
in -current is over, I'll put a 2.2.x specific version in the RELENG_2_2
branch. If somebody wants a 2.2 version of this driver now, they can check
out the previous version from CVS or ask me via e-mail.
Gee people, I didn't mean to stir up such a controversy. I just wanted
to make sure I could get this thing to work with both kernel versions
and didn't want to have to maintain two separate copies. All ya hadda
do was ask. :)
drivers here do and it also blows up in building GENERIC during
a release build if you try and include <osreldate.h> (which shot
my SNAP dead - argh!). Use __FreeBSD__ instead.
unexpectedly do not complete writes even with sync I/O requests.
This should help the behavior of mmaped files when using
softupdates (and perhaps in other circumstances also.)
This driver supports the following cards/integrated ethernet controllers:
Compaq Netelligent 10, Compaq Netelligent 10/100, Compaq Netelligent 10/100,
Compaq Netelligent 10/100 Proliant, Compaq Netelligent 10/100 Dual Port,
Compaq NetFlex-3/P Integrated, Compaq NetFlex-3/P Integrated,
Compaq NetFlex 3/P w/ BNC, Compaq Deskpro 4000 5233MMX.
It should also support Texas Instruments NICs that use the ThunderLAN
chip, though I don't have any to test. If you've got a card that uses
the ThunderLAN chip but isn't listed in the PCI vendor/product list in
if_tl.c, try adding it and see what happens.
The driver supports any MII compliant PHY at 10 or 100Mbps speeds in
full or half duplex. (Those I've personally tested are the National
Semiconductor DP83840A (Prosignia server), the Level 1 LXT970 (Deskpro
desktop), and the ThunderLAN's internal 10baseT PHY.) Autonegotiation,
hardware multicast filtering, BPF and ifmedia support are included.
This chip is pretty fast; Prosignia servers with NCR SCSI, ThunderLAN
ethernet and FreeBSD make for a nice combination.
thresholds (in terms of queued packets for a period of time)
where -auto links will be brought up and down. By default,
all auto links come up when we reach NETWORK phase and never
go down.
o Display current autoload state in `show bundle'.
o Disable the idle timer as soon as it's called.
o Disable the idle and autoload timers when exiting (in case
we're abending).
size we receive here should fit into the receive buffer. Unfortunately,
there's no 100% foolproof way to distinguish a ridiculously large record
size that a client actually meant to send us from a ridiculously large
record size that was sent as a spoof attempt.
The one value that we can positively identify as bogus is zero. A
zero-sized record makes absolutely no sense, and sending an endless
supply of zeroes will cause the server to loop forever trying to
fill its receive buffer.
Note that the changes made to readtcp() make it okay to revert this
sanity test since the deadlock case where a client can keep the server
occupied forever in the readtcp() select() loop can't happen anymore.
This solution is not ideal, but is relatively easy to implement. The
ideal solution would be to re-arrange the way dispatching is handled
so that the select() loop in readtcp() can be eliminated, but this is
difficult to implement. I do plan to implement the complete solution
eventually but in the meantime I don't want to leave the RPC library
totally vulnerable.
That you very much Sun, may I have another.
cases we ignore it (eg: read/write) to maintain chmod-after-open semantics
but in other cases we do care, eg: creating files, access() etc. Never
ignore errors from VOP_ACCESS() on immutable files.
This apparently comes from BSDI (from Keith Bostic) via NetBSD.
PR: 5148
Submitted by: Yoshiro MIHIRA <sanpei@yy.cs.keio.ac.jp>
