This makes pkgbase easier by tagging these as CONFS so they are properly
tagged as config files.
Approved by: will (mentor)
Sponsored by: Essen Hackathon
Differential Revision: https://reviews.freebsd.org/D16553
The pfi_skip_if() function sometimes caused skipping of groups to work,
if the members of the group used the groupname as a name prefix.
This is often the case, e.g. group lo usually contains lo0, lo1, ...,
but not always.
Rather than relying on the name explicitly check for group memberships.
Obtained from: OpenBSD (pf_if.c,v 1.62, pf_if.c,v 1.63)
Sponsored by: Essen Hackathon
to match reality (slightly different to what was submitted in the
PR: use english word instead of math-symbol).
- Wrap the corresponding part to below 80 characters per line.
Submitted by: yamagi@yamagi.org
PR: 202202
Sponsored by: Essen Hackathon
Fix bug introduced in r98542: previously to this revision the byte-swapped
value was compared at this place. The current check is in a conditional
section where the non-byte-swapped value was already checked to be not
the value which is checked again. As byte-swapping is activated afterwards,
it only makes sense if the byte-swapped value is checked.
Submitted by: Keith White <kwhite@site.uottawa.ca>
PR: 200059
MFC after: 1 month
Sponsored by: Essen Hackathon
This helps with pkgbase as it tags this as a config file so it is handled as
such
Approved by: allanjude (mentor)
Sponsored by: Essen Hackathon
Differential Revision: https://reviews.freebsd.org/D16673
This helps with pkgbase as this config file will now be tagged as a config
file
Approved by: allanjude (mentor)
Sponsored by: Essen Hackathon
Differential Revision: https://reviews.freebsd.org/D16674
This helps with pkgbase to tag this config file as a config file.
Approved by: allanjude (mentor), will (mentor)
Differential Revision: https://reviews.freebsd.org/D16559
This helps pkgbase as this config file will now be tagged as a config file.
Approved by: allanjude (mentor)
Differential Revision: https://reviews.freebsd.org/D16675
This helps with pkgbase as these config files will be properly tagged as
config files.
Approved by: allanjude (mentor), oshogbo
Differential Revision: https://reviews.freebsd.org/D16679
The Makefile part in the PR is solved already differently, so this
part is skipped form the PR The man page change change is slightly
changed to adapt to the way the Makefile works and to the spirit
of what is intended here.
Submitted by: Juan Ramón Molina Menor <info@juanmolina.eu>
PR: 194910
Sponsored by: Essen Hackathon
SVN r337458 erroneously partially reverted r265885.
This is immediately visible when running the Kyua/ATF tests for
usr.bin/printf, which actually test sh's printf builtin.
PR: 229641
[x86] Fix a really subtle miscompile due to a somewhat glaring bug in
EFLAGS copy lowering.
If you have a branch of LLVM, you may want to cherrypick this. It is
extremely unlikely to hit this case empirically, but it will likely
manifest as an "impossible" branch being taken somewhere, and will be
... very hard to debug.
Hitting this requires complex conditions living across complex
control flow combined with some interesting memory (non-stack)
initialized with the results of a comparison. Also, because you have
to arrange for an EFLAGS copy to be in *just* the right place, almost
anything you do to the code will hide the bug. I was unable to reduce
anything remotely resembling a "good" test case from the place where
I hit it, and so instead I have constructed synthetic MIR testing
that directly exercises the bug in question (as well as the good
behavior for completeness).
The issue is that we would mistakenly assume any SETcc with a valid
condition and an initial operand that was a register and a virtual
register at that to be a register *defining* SETcc...
It isn't though....
This would in turn cause us to test some other bizarre register,
typically the base pointer of some memory. Now, testing this register
and using that to branch on doesn't make any sense. It even fails the
machine verifier (if you are running it) due to the wrong register
class. But it will make it through LLVM, assemble, and it *looks*
fine... But wow do you get a very unsual and surprising branch taken
in your actual code.
The fix is to actually check what kind of SETcc instruction we're
dealing with. Because there are a bunch of them, I just test the
may-store bit in the instruction. I've also added an assert for
sanity that ensure we are, in fact, *defining* the register operand.
=D
Noticed by: kib
MFC after: 1 week
Regardless if a verbose scan is required or not, we'd still want to display the
full SSID name by default so use the IEE80211_NWID_LEN constant to set the
value to use instead.
Tested on rene@'s laptop.
Reviewed by: kp
Sponsored by: Essen Hackathon
Differential Revision: https://reviews.freebsd.org/D16566
It's useful for how to mount an iso file via loopback.
Reviewed by: jilles
Approved by: bcr (mentor)
Differential Revision: https://reviews.freebsd.org/D16067
When invoked on a large list of files, it is most common for a small number of
uids/gids to own most of the results.
Like ls(1), use pwcache(3) to avoid repeatedly looking up the same IDs.
Example microbenchmark and non-scientific results:
$ time (find /usr/src -type f -print0 | xargs -0 stat >/dev/null)
BEFORE:
3.62s user 5.23s system 102% cpu 8.655 total
3.47s user 5.38s system 102% cpu 8.647 total
AFTER:
1.23s user 1.81s system 108% cpu 2.810 total
1.43s user 1.54s system 107% cpu 2.754 total
Does this microbenchmark have any real-world significance? Until a use case
is demonstrated otherwise, I doubt it. Ordinarily I would be resistant to
optimizing pointless microbenchmarks in base utilities (e.g., recent totally
gratuitous changes to yes(1)). However, the pwcache(3) APIs actually
simplify stat(1) logic ever so slightly compared to the raw APIs they wrap,
so I think this is at worst harmless.
PR: 230491
Reported by: Thomas Hurst <tom AT hur.st>
Discussed with: gad@
commit 417104bdd3c7ce07ec58674dd078f9891c3bc780
Author: Ned Bass <bass6@llnl.gov>
Date: Thu Feb 26 12:24:11 2015 -0800
Use cached feature info in spa_add_feature_stats()
Avoid issuing I/O to the pool when retrieving feature flags information.
Trying to read the ZAPs from disk means that zpool clear would hang if
the pool is suspended and recovery would require a reboot. To keep the
feature stats resident in memory, we hang a cached nvlist off of the
spa. It is built up from disk the first time spa_add_feature_stats() is
called, and refreshed thereafter using the cached feature reference
counts. spa_add_feature_stats() gets called at pool import time so we
can be sure the cached nvlist will be available if the pool is later
suspended.
Signed-off-by: Ned Bass <bass6@llnl.gov>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#3082
from LLVM's libunwind, which end up in libgcc_eh.a and libgcc_s.so.
This is because the unwinder needs the unwinder data for its own
functions.
However, for the C++ sources in libunwind, -fexceptions is already the
default, and this can have the side effect of generating a reference to
__gxx_personality_v0, the so-called personality function, which is
normally provided by the C++ ABI library (libcxxrt or libsupc++).
If the reference ends up in the eventual libgcc_s.so, linking any
non-C++ programs against it will fail with "undefined reference to
`__gxx_personality_v0'".
Note that at high optimization levels, the reference is usually
optimized away, which is why we have never noticed this problem before.
With clang 7.0.0 though, higher optimization levels don't help anymore,
since the addition of address-significance tables [1] in
<https://reviews.llvm.org/rL337339>. Effectively, this always causes a
reference to __gxx_personality_v0.
After discussion with the upstream author of that change, it turns out
that we should compile libunwind sources with the -fno-exceptions
-funwind-tables flags instead. This ensures unwind tables are
generated, but no references to any personality functions are emitted.
[1] https://lists.llvm.org/pipermail/llvm-dev/2018-May/123514.html
Reported by: jbeich
PR: 230399
MFC after: 1 week
The idea was to get the uncontroversial mechanical change out of the way,
then get the meatier functional changes reviewed subsequently. I had not
realized that the immediately adjacent issue was addressed in a different
direction in r334506 (see Warner's guidance in D15592).
Discussion continues, trying to determine if there is a secondary issue
still[1] and how best to fix it. With 12-related activities coming up,
while that is ongoing, just take this back for now.
[1]: Shutdown-time eventhandler events fire normally during panic's reboot
path. Driver callbacks that attempt to issue and wait on interrupt-
completed IO may never complete, hanging the system. This is particularly
obnoxious in the shutdown/panic path, as the debugger cannot be entered
anymore and the hang prevents reboot restoring availability.
(There's nothing CAM-specific about this problem -- any shutdown
event-triggered driver could do something like this during panic. But most
NICs, etc. don't try to send spin-down commands at shutdown. ;-))
Discussed with: imp, markj
msgbufinit may be called multiple times as we initialize the msgbuf into a
progressively larger buffer. This doesn't happen as of now on head, but it
may happen in the future and we generally support this. As such, only print
the boot tag if we've just initialized the buffer for the first time.
The boot tag also now has a newline appended to it for better visibility,
and has been switched to a normal printf, by requesto f bde, after we've
denoted that the msgbuf is mapped.
While this implements a standards-conforming C11 function, there's
implementation details the programmer needs to know. Include those
here. Make changes inspired by comments on the initial review as well,
though mostly this involves stealing the epoch verbage from
gettimeofday(2). Add myself to authors since I've now changed a
substantial amount of this man page.
Remove assert.h and _DIAGASSERT to create a paper-trail of changes
from NetBSD. Specifically didn't fix other style issues since I
don't want this to diverge from the NetBSD original too much and
that's too niggling a change to be worth future merge hassles.
Differential Review: https://reviews.freebsd.org/D16649
Bring in the functionality for timespec_get from NetBSD. I've lightly
edited the .c file to remove _DIAGASSERT because FreeBSD doesn't have
that functionality and the typical #define'ing it to assert isn't
right here. The man page is verbatim from NetBSD, but will be revised
as part of a larger cleanup of the time man pages (they are
inconsistent and vague in all the wrong places).
Differential Review: https://reviews.freebsd.org/D16649
returns error.
Now -q option only makes it quiet. And when -f flag is specified, the
command will ignore errors and continue executing with next batched
command.
MFC after: 2 weeks
The comment above ieee80211_ageq_cleanup specifically notes that the queue
is assumed to be empty, and in order to make it so, ieee80211_ageq_drain
must be used.
Submitted by: Augustin Cavalier <waddlesplash@gmail.com>
Obtained from: Haiku (dffc3e235360cd7b71261239ee8507b7d62a1471)
MFC after: 1 week
NT_GNU_PROPERTY_TYPE_0 in a .note.gnu.property section "contains a
program property note which describes special handling requirements
for linker and run-time loader." (from the System V Application Binary
Interface - Linux Extensions")
Intel CET uses two processor-specific program properties in
NT_GNU_PROPERTY_TYPE_0: GNU_PROPERTY_X86_FEATURE_1_IBT to indicate that
all executable sections are compatible with Indirect Branch Tracking,
and GNU_PROPERTY_X86_FEATURE_1_SHSTK to indicate that sections are
compatible with shadow stack.
A later change should add decoding of the individual properties.
MFC after: 1 week
Sponsored by: The FreeBSD Foundation
MFV:
commit ee36c709c3d5f7040e1bd11f5c75318aa03e789f
Author: Gvozden Neskovic <neskovic@gmail.com>
Date: Sat Aug 27 20:12:53 2016 +0200
perf: 2.75x faster ddt_entry_compare()
First 256bits of ddt_key_t is a block checksum, which are expected
to be close to random data. Hence, on average, comparison only needs to
look at first few bytes of the keys. To reduce number of conditional
jump instructions, the result is computed as: sign(memcmp(k1, k2)).
Sign of an integer 'a' can be obtained as: `(0 < a) - (a < 0)` := {-1, 0, 1} ,
which is computed efficiently. Synthetic performance evaluation of
original and new algorithm over 1G random keys on 2.6GHz Intel(R) Xeon(R)
CPU E5-2660 v3:
old 6.85789 s
new 2.49089 s
perf: 2.8x faster vdev_queue_offset_compare() and vdev_queue_timestamp_compare()
Compute the result directly instead of using conditionals
perf: zfs_range_compare()
Speedup between 1.1x - 2.5x, depending on compiler version and
optimization level.
perf: spa_error_entry_compare()
`bcmp()` is not suitable for comparator use. Use `memcmp()` instead.
perf: 2.8x faster metaslab_compare() and metaslab_rangesize_compare()
perf: 2.8x faster zil_bp_compare()
perf: 2.8x faster mze_compare()
perf: faster dbuf_compare()
perf: faster compares in spa_misc
perf: 2.8x faster layout_hash_compare()
perf: 2.8x faster space_reftree_compare()
perf: libzfs: faster avl tree comparators
perf: guid_compare()
perf: dsl_deadlist_compare()
perf: perm_set_compare()
perf: 2x faster range_tree_seg_compare()
perf: faster unique_compare()
perf: faster vdev_cache _compare()
perf: faster vdev_uberblock_compare()
perf: faster fuid _compare()
perf: faster zfs_znode_hold_compare()
Signed-off-by: Gvozden Neskovic <neskovic@gmail.com>
Signed-off-by: Richard Elling <richard.elling@gmail.com>
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes#5033
The canonical form of sync is:
sync L, E (if Category Elemental Memory Barriers implemented)
The L bits (2) denote the type of sync:
0 -- hwsync
1 -- lwsync
2 -- ptesync or hwsync
It's been found that most 32-bit CPUs designed prior to the introduction of
lwsync will ignore the L bits. However, some cores, particularly the e500 core,
will trigger an illegal instruction exception. Adding these variants will make
it easier to see which sync variant is actually being used in case of a trap.
libl is needed for config(8), which is a bootstrap-tool. It is possible to
build a system WITHOUT_TOOLCHAIN to exclude lex and thus, libl. We still
need to support building from this kind of host, though.
While here, group the config(8) dependencies together and add a small
explanation. These can likely both be scoped more clearly, but this will
need some further investigation.
Reported by: rgrimes (not WITHOUT_TOOLCHAIN, but provoked investigation)
MFC after: immediately
in ipf_nat_checkout() and report it in the frb_natv4out and frb_natv4in
dtrace probes.
This is currently being used to diagnose NAT failures in PR/208566. It's
rather handy so this commit makes it available for future diagnosis and
debugging efforts.
PR: 208566
MFC after: 1 week
