A new loader.conf(5) option of geom_eli_passphrase_prompt="YES" will now
allow you to enter your geli(8) root-mount credentials prior to invoking
the kernel.
See check-password.4th(8) for details.
Differential Revision: https://reviews.freebsd.org/D2105
Reviewed by: imp, kmoore
Discussed on: -current
MFC after: 3 days
X-MFC-to: stable/10
Relnotes: yes
r273544 changed the -f option allow no arguments in vt mode (used to
reset the font back to the default), but broke the optionality of the
size argument for syscons. Drop the required argument from syscons'
optstring for -f so the optional argument handler works the same way
for both syscons and vt.
Reported by: bde
Sponsored by: The FreeBSD Foundation
Consumers should not need to encode fifolog's dependency on libz.
Handle it automatically in src.libnames.mk.
Differential Revision: https://reviews.freebsd.org/D2278
Reviewed by: bapt
Sponsored by: The FreeBSD Foundation
ASIZE() was never used, and min() stopped being used in r207812.
Differential Revision: https://reviews.freebsd.org/D2230
Reviewed by: emax
Approved by: emax
MFC after: 1 week
So far, we were always using HID_USAGE() to determine the Usage ID of a
certain HID report input item. This does not work as intended if a field
is an array and the allowed usages are specified with a usage range, as
HID_USAGE() will return 0. We need to use the field value as an index in
the usage range list in this case instead.
This makes the volume keys in a Microsoft Bluetooth Mobile Keyboard
5000 be properly recognized. The relevant part of the HID report looks
like this:
0xA1, 0x01, // Collection (Application)
0x85, 0x07, // Report ID (7)
0x05, 0x0C, // Usage Page (Consumer)
0x19, 0x00, // Usage Minimum (Unassigned)
0x2A, 0xFF, 0x03, // Usage Maximum (0x03FF)
0x95, 0x01, // Report Count (1)
0x75, 0x10, // Report Size (16)
0x15, 0x00, // Logical Minimum (0)
0x27, 0xFF, 0x03, 0x00, 0x00, // Logical Maximum (1023)
0x81, 0x00, // Input (Data,Array,Abs,No Wrap,Linear,Preferred
// State,No Null Position)
When a key such as "volume down" is pressed, the following data is
transferred through Interrupt In:
0x07 0xEA 0x00
Differential Revision: https://reviews.freebsd.org/D2229
Reviewed by: emax
Approved by: emax
MFC after: 1 week
When checking the length of the mutual secret password the variable for
the secret password was used by mistake. This resulted in ctld never
warning about the length of the mutual secret being wrong even if it was.
MFC after: 3 days
Sponsored by: iXsystems
Summary:
Add "GELI Passphrase:" prompt to boot loader.
A new loader.conf(5) option of geom_eli_passphrase_prompt="YES" will now
allow you to enter your geli(8) root-mount credentials prior to invoking
the kernel.
See check-password.4th(8) for details.
Differential Revision: https://reviews.freebsd.org/D2105
Reviewed by: (your name[s] here)
MFC after: 3 days
X-MFC-to: stable/10
Relnotes: yes
Test Plan:
Drop a head copy of check-password.4th into /boot and then apply the patch
(only the patch to /boot/check-password.4th is required; no other changes are
required but you do have to have a HEAD copy of check-password.4th to
apply the patch).
NB: The rest of your /boot files can be up to 2 years old but no older.
NB: The test won't work unless your kernel has the following change
https://svnweb.freebsd.org/base?view=revision&revision=273489
Now, put into /boot/loader.conf:
geom_eli_passphrase_prompt="YES"
and reboot.
You should be prompted for a GELI passphrase before the menu (if enabled),
just after loading loader.conf(5).
NB: It doesn't matter if you're using GELI or not. However if you are using
GELI and a sufficiently new enough release (has SVN r273489) and you entered
the proper passphrase to mount your GELI encrypted root device(s), you should
notice that the boot process did not stop (you went from loader all the way to login).
Reviewers: cperciva, allanjude, scottl, kmoore
Subscribers: jkh, imp
Differential Revision: https://reviews.freebsd.org/D2105
The -a flag reads a file saved by -O, not -o.
The -m flag requires the -R flag. Copy that paragraph from -a.
Reviewed by: adrian
Approved by: kib (mentor)
MFC after: 1 week
Sponsored by: Dell Inc
There are a number of assumptions about legacy interrupts always
being available in virtio so don't allow back-ends to make the
decision to support them.
This fixes the issue seen with virtio-rnd on OpenBSD. MSI-x vectors
were not being used, and the virtio-rnd backend wasn't allocating a
legacy interrupt resulting in a bhyve assert and guest exit.
Reported by: Julian Hsiao, madoka at nyanisore dot net
Reviewed by: neel
MFC after: 1 week
may need some work, but at least now it will read properly.
(gnn you are still on the hook to help out with this
like you committed).
Sponsored by: Netflix.
bsdconfig's f_package_add doesn't seem to support using the pkg repo from /etc/pkg/FreeBSD.conf, it also tries to run the commands on the installer image, not in the destination chroot
Instead, manually bootstrap pkg in the chroot, and then install the requested packages (in the chroot)
Doesn't use pkg -c, because pkg is not installed on the installer image
PR: 196250
Differential Revision: https://reviews.freebsd.org/D2026
Approved by: bapt
Sponsored by: ScaleEngine Inc.
I've missed that network driver sometimes returns taken request back to
available queue without processing. Add new helper function for that case.
Reported by: flo
MFC after: 2 weeks
I/O interface.
Asynchronous operation, based on r280026 change, allows to not block virtual
CPU during I/O processing, that on slow/busy storage can take seconds.
Use of recently improved block I/O interface allows to process multiple
requests same time, that improves random I/O performance on wide storages.
Benchmarks of virtual disk, backed by ZVOL on RAID10 pool of 4 HDDs, show
~3.5 times random read performance improvements, while no degradation on
linear I/O. Guest CPU usage during test dropped from 100% to almost zero.
MFC after: 2 weeks
Original virtqueue design allows queued and out-of-order processing, but
helpers added in r253440 suppose only direct blocking in-order one.
It could be fine for network, etc., but it is a huge limitation for storage
devices.
On parallel random I/O this allows better utilize wide storage pools.
To not confuse prefetcher on linear I/O, consecutive requests are executed
sequentially, following the same logic as was earlier implemented in CTL.
Benchmarks of virtual AHCI disk, backed by ZVOL on RAID10 pool of 4 HDDs,
show ~3.5 times random read performance improvements, while no degradation
on linear I/O.
MFC after: 2 weeks
It works only for virtual disks backed by ZVOLs and raw devices supporting
BIO_DELETE. Virtual disks backed by files won't report this capability.
MFC after: 2 weeks
Relnotes: yes
When a gpiobus child is added, use its name to identify the mapped pin
names.
Make the respective changes to libgpio.
Add a new '-n' flag to gpioctl(8) to set the pin name.
Differential Revision: https://reviews.freebsd.org/D2002
Reviewed by: rpaulo
Requested by: many
Passing through physical block size/offset from underlying storage allows
guest to manage proper data and I/O alignment to improve performance.
MFC after: 2 weeks
While it may have little sense, text and logout requests can be queued.
If they are, they consume cmdsn, so we should increment our conn_cmdsn.
MFC after: 1 week
