initializes it to ETHER_HDR_LEN so we have to override it after
calling ether_ifattch().
While I'm here remove setting if_mtu value, it's initialized in
ether_ifattach().
This patch or something similar will likely be included in a future
BIND release.
PR: bin/138061
Submitted by: Michael Baker <michael.baker@diversit.com.au>
Original patch submitted by: Volker <volker@vwsoft.com>
Patch reviewed and tweaked by: ISC
It is valid for an on-disk GPT header to report a header size which is
greater than 92 bytes. Previously, we would read in the sector and copy
only the 92 bytes that we know how to deal with before calculating the
checksum for comparison. This meant that when we did the checksum, we
overshot the buffer and took in random memory, so the checksum would fail.
We now determine the size of the header and allocate enough space to
preserve the entire on-disk contents. This allows us to be correctly
calculate the checksum and be able to modify and write the header back
to the disk, while preserving data that we might not understand.
Reported by: Kris Weston
Approved by: marcel@
MFC after: 2 weeks
o acpi_hpet: auto-added 'wildcard' devices can be identified by
non-NULL handle attribute.
o acpi_ec: auto-add 'wildcard' devices can be identified by
unset (NULL) private attribute.
o acpi_cpu: use private instead of magic to store cpu id.
Reviewed by: jhb
Silence from: acpi@
MFC after: 2 weeks
X-MFC-Note: perhaps the ivar should stay for ABI stability
Introduce two spare dma maps for standard buffer and jumbo buffer
respectively. If loading a dma map failed reuse previously loaded
dma map. This should fix unloaded dma map is used in case of dma
map load failure. Also don't blindly unload dma map and defer
dma map sync and unloading operation until we know dma map for new
buffer is successfully loaded. This change saves unnecessary dma
load/unload operation. Previously bge(4) tried to reuse mbuf
with unloaded dma map which is really bad thing in bus_dma(9)
perspective.
While I'm here update if_iqdrops if we can't allocate Rx buffers.
standard buffer size. If controller is not capable of handling
jumbo frame, interface MTU couldn't be larger than standard MTU
which in turn the received should be fit in standard buffer. This
fixes bus_dmamap_sync call for jumbo ring is called even if
interface is configured to use standard MTU.
Also if total frame size could be fit into standard buffer don't
use jumbo buffers.
itself to an associated PCI device if it exists. It is little bit hackish
but it should fix build without frame buffer driver since r198964.
Fix some style(9) nits in vga_isa.c while we are here.
if_watchdog/if_timer to NULL/0 when initializing an ifnet. if_alloc()
sets those members to NULL/0 already.
(Missed this driver in the earlier commit.)
showing the message creates other side-effects. Remove the Rx
FIFO overrun message in interrupt handler. msk(4) should recover
from the FIFO overruns without any user intervention. Users can
still check the Rx FIFO overrun counter from MAC MIB statistics
maintained in driver(dev.msk.0.stats.rx.overflows).
send an ACK right away if data was drained from a TCP socket that had
previously advertised a zero-sized window. The current code requires the
receive window to be exactly zero for this to kick in. If window scaling is
enabled and the window is smaller than the scale, then the effective window
that is advertised is zero. However, in that case the zero-sized window
handling is not enabled because the window is not exactly zero. The fix
changes the code to check the raw window value against zero.
Reviewed by: bz
MFC after: 1 week
Many operating systems also provide MAP_ANONYMOUS. It's not hard to
support this ourselves, we'd better add it to make it more likely for
applications to work out of the box.
Reviewed by: alc (mman.h)
- Disallow setting of flags not supported by ext2fs.
- Map EXT2_APPEND_FL to SF_APPEND.
- Map EXT2_IMMUTABLE_FL to SF_IMMUTABLE.
- Map EXT2_NODUMP_FL to UF_NODUMP.
Note that ext2fs doesn't support user settable append and immutable flags.
EXT2_NODUMP_FL is an user settable flag also on Linux.
PR: kern/122047
Reported by: Ighighi
Submitted by: Aditya Sarawgi (original version)
Reviewed by: bde
Approved by: trasz (mentor)
- ANSIfy prototypes;
- Add __unused for parameters that is not being currently used;
- Add a header for subrountines being called from other modules.
Reviewed by: mjacob
for buffer allocation. If driver know we are out of Rx buffers let
controller stop. This should fix panic when interface is run even
if it had no configured Rx buffers.
and Rx DMA tag separately. Previously it used a common mbuf DMA tag
for both Tx and Rx path but Rx buffer(standard ring case) should
have a single DMA segment and maximum buffer size of the segment
should be less than or equal to MCLBYTES. This change also make it
possible to add TSO with minor changes.
bge_newbuf_std still has a bug for handling dma map load failure
under high network load. Just reusing mbuf is not enough as driver
already unloaded the dma map of the mbuf. Graceful recovery needs
more work.
Ideally we can just update dma address part of a Rx descriptor
because the controller never overwrite the Rx descriptor. This
requires some Rx initialization code changes and it would be done
later after fixing other incorrect bus_dma(9) usages.
