Such pages are dequeued as they're encountered during the inactive queue
scan, so by the time we get to the active queue scan, they should have
already been subtracted from the inactive queue length.
Reviewed by: alc
Differential Revision: https://reviews.freebsd.org/D15479
Microchip provided a permissively-licensed lan78xx header, which has
an 'ETH_' prefix on most definitions. Follow suit in our driver.
Sponsored by: The FreeBSD Foundation
1. align to 128 bytes to avoid possible waste from the preceeding section
2. sort entries by alignment SORT_BY_ALIGNMENT, plugging the holes (most
entries are one byte in size, but they got interleaved with bigger ones)
Interestingly I was looking for a feature of the sort earlier and failed
to find it. It turns out the script was already utilizing sorting in other
places, so shame on me.
Thanks for Travis Geiselbrecht for pointing me at the feature.
An etid (ethoffload tid) is allocated for a send tag and it acquires a
reference on the traffic class that matches the send parameters
associated with the tag.
Sponsored by: Chelsio Communications
In UTF-8 locales mandoc uses a number of characters outside of the Basic
Latin group, e.g. from general punctuation or miscellaneous mathematical
symbols, and these rendered as ? in text mode.
This change adds (char, replacement, code point, description):
¦ | U+00A6 Broken bar
✓ √ U+2713 Checkmark
Sponsored by: The FreeBSD Foundation
adds:
- epoch_enter_critical() - can be called inside a different epoch,
starts a section that will acquire any MTX_DEF mutexes or do
anything that might sleep.
- epoch_exit_critical() - corresponding exit call
- epoch_wait_critical() - wait variant that is guaranteed that any
threads in a section are running.
- epoch_global_critical - an epoch_wait_critical safe epoch instance
Requested by: markj
Approved by: sbruno
This simplifies the use of the path variable by making it NUL
terminated. This is a prerequisite for further cleanups.
Reviewed by: imp
Sponsored by: DARPA, AFRL
Differential Revision: https://reviews.freebsd.org/D15467
Since NFSv4.1 clients normally create a single session which supports
both fore and back channels, it is unlikely that a callback will fail
due to a lack of a back channel.
However, if this failure occurred, the session wasn't being dereferenced
and would never be free'd.
Found by inspection during pNFS server development.
Tested by: andreas.nagy@frequentis.com
MFC after: 2 months
storage, CDC ACM (serial), and CDC ECM (ethernet) at the same time.
It's quite similar in function to Linux' "g_multi" gadget.
Reviewed by: hselasky@
MFC after: 2 weeks
Relnotes: yes
Sponsored by: The FreeBSD Foundation
This change moves to using a reference count across lock drop / reacquire
to guarantee liveness.
Currently sends on unix sockets contend heavily on read locking the list lock.
unix1_processes in will-it-scale peaks at 6 processes and then declines.
With this change I get a substantial improvement in number of operations per second
with 96 processes:
x before
+ after
N Min Max Median Avg Stddev
x 11 1688420 1696389 1693578 1692766.3 2971.1702
+ 10 63417955 71030114 70662504 69576423 2374684.6
Difference at 95.0% confidence
6.78837e+07 +/- 1.49463e+06
4010.22% +/- 88.4246%
(Student's t, pooled s = 1.63437e+06)
And even for 2 processes shows a ~18% improvement.
"Small" iron changes (1, 2, and 4 processes):
x before1
+ after1.2
+------------------------------------------------------------------------+
| + |
| x + |
| x + |
| x + |
| x ++ |
| xx ++ |
|x x xx ++ |
| |__________________A_____M_____AM____||
+------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 10 1131648 1197750 1197138.5 1190369.3 20651.839
+ 10 1203840 1205056 1204919 1204827.9 353.27404
Difference at 95.0% confidence
14458.6 +/- 13723
1.21463% +/- 1.16683%
(Student's t, pooled s = 14605.2)
x before2
+ after2.2
+------------------------------------------------------------------------+
| +|
| +|
| +|
| +|
| +|
| +|
| x +|
| x +|
| x xx +|
|x xxxx +|
| |___AM_| A|
+------------------------------------------------------------------------+
N Min Max Median Avg Stddev
x 10 1972843 2045866 2038186.5 2030443.8 21367.694
+ 10 2400853 2402196 2401043.5 2401172.7 385.40024
Difference at 95.0% confidence
370729 +/- 14198.9
18.2585% +/- 0.826943%
(Student's t, pooled s = 15111.7)
x before4
+ after4.2
N Min Max Median Avg Stddev
x 10 3986994 3991728 3990137.5 3989985.2 1300.0164
+ 10 4799990 4806664 4806116.5 4805194 1990.6625
Difference at 95.0% confidence
815209 +/- 1579.64
20.4314% +/- 0.0421713%
(Student's t, pooled s = 1681.19)
Tested by: pho
Reported by: mjg
Approved by: sbruno
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15430
one character too many. Note that this function is only used to decode
string descriptors generated by the kernel itself.
Reviewed by: hselasky@
MFC after: 2 weeks
Sponsored by: The FreeBSD Foundation
This driver was merged to HEAD one week prior to Exar publicly announcing they
had left the Ethernet market. It is not known to be used and has various code
quality issues spotted by Brooks and Hiren. Retire it in preparation for
FreeBSD 12.0.
Submitted by: kbowling
Reviewed by: brooks imp
Relnotes: yes
Sponsored by: Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15442
The module uses the mod clock and not the ahb one.
We need to set the mod clock to twice the speed requested as the smallest
divider in the controller is 2.
The clock test function weren't calculating the register value best on the
best div but on the max one.
The cdr2 test function was using the cdr1 formula.
Pointy Hat: manu
This driver supports two Microchip USB-Ethernet controllers:
LAN7800 USB 3.1 to 10/100/1000 Mbps Ethernet
LAN7515 USB 2 to 10/100/1000 Mbps Ethernet with built-in USB hub
The LAN7515 is the Ethernet controller on the Raspberry Pi 3B+.
At present there is no datasheet for the LAN7515, but it is effectively
a USB 2 hub combined with a LAN7800 controller. A comprehensive LAN7800
datasheet is at http://www.microchip.com/wwwproducts/en/LAN7800.
This driver is based on the structure of the smsc(4) driver which
supports Microchip/SMSC's LAN95xx family. (Microchip acquired SMSC
in May 2012.) The Linux lan78xx driver served as a reference for some
functionality and registers.
The 'muge' driver name comes from "Microchip USB Gigabit Ethernet".
I made some style adjustments and minor edits to Arshan's submission.
It will be connected to the build after additional review and testing.
Thanks to Microchip for providing a number of Evaluation Boards (EVBs)
for development and testing.
Submitted by: Arshan Khanifar
Reviewed by: hselasky (earlier)
Sponsored by: The FreeBSD Foundation
Differential Revision: https://reviews.freebsd.org/D15168
This driver is compatible with H3/H5/A64.
Test was done on the OrangePi-PC2 board (H5 based), which have a mx25l1606e
spi flash on it, by writing u-boot image, reading it and booting from the spi.
There is still room for improvement especially on reading using the controller
automatic burst which will avoid us to write dummy data to the TX FIFO.
DMA is also not supported as we currently don't support the DMA controller on
those SoCs
Only add a kernel module for it.
This change reverts a "while here" part of r333321 that moved clearing
of suspended_cpus to an earlier place.
Apparently, there can be a problem when modifying (shared) memory before
restoring proper cache attributes. So, to be safe, move the clearing to
the old place.
Many thanks to Johannes Lundberg for bisecting the changes to that
particular commit and then bisecting the commit to the particular
change.
Reported by: many
Debugged by: Johannes Lundberg <johalun0@gmail.com>
MFC after: 1 week
X-MFC with: r333321
The value of m->queue must be cached after comparing it with PQ_NONE,
since it may be concurrently changing.
Reported by: glebius
Reviewed by: jeff
Differential Revision: https://reviews.freebsd.org/D15462
We need to set the current vnet before iterating over the global
interface list. Because the dump device may only be set from the host,
only proceed with configuration if the thread belongs to the default
vnet. [1]
Also fix a resource leak that occurs if the priv_check() in set_dumper()
fails.
Reported by: mmacy, sbruno [1]
Reviewed by: sbruno
X-MFC with: r333283
Differential Revision: https://reviews.freebsd.org/D15449
Each TCP connection that uses the system default cc_newreno(4) congestion
control algorithm module leaks a "struct newreno" (8 bytes of memory) at
connection initialisation time. The NULL-pointer dereference is only germane
when using the ABE feature, which is disabled by default.
While at it:
- Defer the allocation of memory until it is actually needed given that ABE is
optional and disabled by default.
- Document the ENOMEM errno in getsockopt(2)/setsockopt(2).
- Document ENOMEM and ENOBUFS in tcp(4) as being synonymous given that they are
used interchangeably throughout the code.
- Fix a few other nits also accidentally omitted from the original patch.
Reported by: Harsh Jain on freebsd-net@
Tested by: tjh@
Differential Revision: https://reviews.freebsd.org/D15358
provisioned for NIC_ETHOFLD and the kernel has option RATELIMIT.
It is possible to use the chip's offload queues for normal NIC Tx and
not just TOE Tx. The difference is that these queues support out of
order processing of work requests and have a per-"flowid" mechanism for
tracking credits between the driver and hardware. This allows Tx for
any number of flows bound to different rate limits to be submitted to a
single Tx queue and the work requests for slow flows won't cause HOL
blocking for the rest.
Sponsored by: Chelsio Communications
by default.
This is the first of a series of commits that will add support for
RATELIMIT kernel option to the base if_cxgbe driver, for use with
ordinary NIC traffic "flows". RATELIMIT is already supported by t4_tom
for the fully-offloaded TCP connections that it handles.
Sponsored by: Chelsio Communications
Add epoch section to struct thread. We can use this to
ennable epoch counter to advance even if a section is
perpetually occupied by a thread.
Approved by: sbruno
(https://svnweb.freebsd.org/base?view=revision&revision=304232)
converting clrbuf() (which clears the entire buffer) to vfs_bio_clrbuf()
(which clears only the new pages that have been added to the buffer).
Failure to properly remove pages from the buffer cache can make
pages that appear not to need clearing to actually have bad random
data in them. See for example base r304232
(https://svnweb.freebsd.org/base?view=revision&revision=304232)
which noted the need to set B_INVAL and B_NOCACHE as well as clear
the B_CACHE flag before calling brelse() to release the buffer.
Rather than trying to find all the incomplete brelse() calls, it
is simpler, though more slightly expensive, to simply clear the
entire buffer when it is newly allocated.
PR: 213507
Submitted by: Damjan Jovanovic
Reviewed by: kib
This implements per-thread counters for PMC sampling. The thread
descriptors are stored in a list attached to the process descriptor.
These thread descriptors can store any per-thread information necessary
for current or future features. For the moment, they just store the counters
for sampling.
The thread descriptors are created when the process descriptor is created.
Additionally, thread descriptors are created or freed when threads
are started or stopped. Because the thread exit function is called in a
critical section, we can't directly free the thread descriptors. Hence,
they are freed to a cache, which is also used as a source of allocations
when needed for new threads.
Approved by: sbruno
Obtained from: jtl
Sponsored by: Juniper Networks, Limelight Networks
Differential Revision: https://reviews.freebsd.org/D15335
