internal format-specific functions return the same as the public
function, so that the public API layer doesn't have to guess the
correct return value. This addresses an obscure problem that occurs
when someone tries to write more data than the size of the entry (as
indicated in the entry header). In this case, the return value from
archive_write_data() was incorrect, reflecting the requested write
rather than the amount actually written.
MFC after: 15 days
- Add a translation so the Linux ioctl's don't conflict with
the FreeBSD definition.
- Assume Linux 32bit emulation on amd64.
This was tested on i386 and amd64 with the 32bit Linux MegaCli.
Eventually we should do a 32bit native FreeBSD translation app.
gone device timers and zombie state entries. There are tunables
that can be used to select a number of parameters.
loop_down_limit - how long to wait for loop to come back up before
declaring
all devices dead (default 300 seconds)
gone_device_time- how long to wait for a device that has appeared
to leave the loop or fabric to reappear (default 30 seconds)
Internal tunables include (which should be externalized):
quick_boot_time- how long to wait when booting for loop to come up
change_is_bad- whether or not to accept devices with the same
WWNN/WWPN that reappear at a different PortID as being the 'same'
device.
Keen students of some of the subtle issues here will ask how
one can keep devices from being re-accepted at all (the answer
is to set a gone_device_time to zero- that effectively would
be the same thing).
- Add a new apic_alloc_vectors() method to the local APIC support code
to allocate N contiguous IDT vectors (aligned on a M >= N boundary).
This function is used to allocate IDT vectors for a group of MSI
messages.
- Add MSI and MSI-X PICs. The PIC code here provides methods to manage
edge-triggered MSI messages as x86 interrupt sources. In addition to
the PIC methods, msi.c also includes methods to allocate and release
MSI and MSI-X messages. For x86, we allow for up to 128 different
MSI IRQs starting at IRQ 256 (IRQs 0-15 are reserved for ISA IRQs,
16-254 for APIC PCI IRQs, and IRQ 255 is reserved).
- Add pcib_(alloc|release)_msi[x]() methods to the MD x86 PCI bridge
drivers to bubble the request up to the nexus driver.
- Add pcib_(alloc|release)_msi[x]() methods to the x86 nexus drivers that
ask the MSI PIC code to allocate resources and IDT vectors.
MFC after: 2 months
- Add 3 new functions to the pci_if interface along with suitable wrappers
to provide the device driver visible API:
- pci_alloc_msi(dev, int *count) backed by PCI_ALLOC_MSI(). '*count'
here is an in and out parameter. The driver stores the desired number
of messages in '*count' before calling the function. On success,
'*count' holds the number of messages allocated to the device. Also on
success, the driver can access the messages as SYS_RES_IRQ resources
starting at rid 1. Note that the legacy INTx interrupt resource will
not be available when using MSI. Note that this function will allocate
either MSI or MSI-X messages depending on the devices capabilities and
the 'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. Also note
that the driver should activate the memory resource that holds the
MSI-X table and pending bit array (PBA) before calling this function
if the device supports MSI-X.
- pci_release_msi(dev) backed by PCI_RELEASE_MSI(). This function
releases the messages allocated for this device. All of the
SYS_RES_IRQ resources need to be released for this function to succeed.
- pci_msi_count(dev) backed by PCI_MSI_COUNT(). This function returns
the maximum number of MSI or MSI-X messages supported by this device.
MSI-X is preferred if present, but this function will honor the
'hw.pci.enable_msix' and 'hw.pci.enable_msi' tunables. This function
should return the largest value that pci_alloc_msi() can return
(assuming the MD code is able to allocate sufficient backing resources
for all of the messages).
- Add default implementations for these 3 methods to the pci_driver generic
PCI bus driver. (The various other PCI bus drivers such as for ACPI and
OFW will inherit these default implementations.) This default
implementation depends on 4 new pcib_if methods that bubble up through
the PCI bridges to the MD code to allocate IRQ values and perform any
needed MD setup code needed:
- PCIB_ALLOC_MSI() attempts to allocate a group of MSI messages.
- PCIB_RELEASE_MSI() releases a group of MSI messages.
- PCIB_ALLOC_MSIX() attempts to allocate a single MSI-X message.
- PCIB_RELEASE_MSIX() releases a single MSI-X message.
- Add default implementations for these 4 methods that just pass the
request up to the parent bus's parent bridge driver and use the
default implementation in the various MI PCI bridge drivers.
- Add MI functions for use by MD code when managing MSI and MSI-X
interrupts:
- pci_enable_msi(dev, address, data) programs the MSI capability address
and data registers for a group of MSI messages
- pci_enable_msix(dev, index, address, data) initializes a single MSI-X
message in the MSI-X table
- pci_mask_msix(dev, index) masks a single MSI-X message
- pci_unmask_msix(dev, index) unmasks a single MSI-X message
- pci_pending_msix(dev, index) returns true if the specified MSI-X
message is currently pending
- Save the MSI capability address and data registers in the pci_cfgreg
block in a PCI devices ivars and restore the values when a device is
resumed. Note that the MSI-X table is not currently restored during
resume.
- Add constants for MSI-X register offsets and fields.
- Record interesting data about any MSI-X capability blocks we come
across in the pci_cfgreg block in the ivars for PCI devices.
Tested on: em (i386, MSI), bce (amd64/i386, MSI), mpt (amd64, MSI-X)
Reviewed by: scottl, grehan, jfv
MFC after: 2 months
- Remove an extra entry from the array for 0x0f prefixed instruction groups.
This fixes decoding of instructions where the second opcode >= 0x80.
- Add support for the 64-bit immediate mov instructions.
- When short_addr is enabled, don't parse the modr/m byte for a 16-bit
address, but as a 32-bit address.
- Support %rip relative addressing.
- Don't print a displacement of 0 if there is a base or index register.
MFC after: 3 days
of NKPT is no longer enough to run amd64 with 16G of RAM, as it
doesn't have space for mapping a kernel (16M kernel would require
additionally 8 page tables).
We are not yet aware of the protocol internals but this way
SCTP traffic over v6 will not be discarded.
Reported by: Peter Lei via rrs
Tested by: Peter Lei <peterlei cisco.com>
- make document title match filename;
- remove hard sentence breaks, whitespace at EOL, and double whitespace;
- sort SEE ALSO xrefs, adding missing section numbers;
- fix a misspelled macro name.
as `packed'.
The C standard leaves the alignment of individual members of a C
struct upto the implementation, so pedantically speaking portable
code cannot assume that the layout of a `struct ar_hdr' in memory
will match its layout in a file. Using a __packed attribute
declaration forces file and memory layouts for this structure to
match.
Submitted by: ru
- Reword some sentences
- Use .Cm for arguments
- s/CAVEAT/CAVEATS/
Based on PR: docs/78174
Submitted by: Jeremy Chadwick <freebsd@jdc.parodius.com>
Reviewed by: brueffer
Approved by: emax (mentor)
MFC after: 3 days
* Use public API, don't access struct archive directly. (People should be able to copy these into their applications as a template for custom I/O callbacks.)
* Set "skip" only for regular files. ("skip" allows the low-level library to catch attempts to add an archive to itself or extract over itself.)
* Simplify the write_open functions by just calling stat() at the beginning. Somehow, these functions had acquired some complex logic that tried to avoid the stat() call but never succeeded.
MFC after: 10 days
file. This doesn't happen in normal use, because the file I/O and
decompression layers only pass through smaller blocks. It can happen
with custom read functions that block I/O in larger blocks.
written to the socket). The rewrite in revision 1.240 got confused by the
FreeBSD 4.x bug compatibility code.
For some reason lighttpd, that was used for testing the new sendfile code,
was not affected by the problem but apache and others using headers/trailers
in the sendfile call received incorrect sbytes values after return from non-
blocking sockets. This then lead to restarts with wrong offsets and thus
mixed up file contents when the socket was writeable again. All programs
not using headers/trailers, like ftpd, were not affected by the bug.
Reported by: Pawel Worach <pawel.worach-at-gmail.com>
Tested by: Pawel Worach <pawel.worach-at-gmail.com>
Using either one of the two would result in an empty protos[]
array, and no sockets were actually listed:
% sockstat -4
USER COMMAND PID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS
% sockstat -6
USER COMMAND PID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS
%
Fix this bug by tweaking appropriately the logic of handling opt_4,
opt_6, opt_u and protos_defined.
Submitted by: des
Pointy hat: keramida
want to confuse people at the very beginning.
Sync TOC/paragraph numbers in the text.
Requested by: Benedikt Stockebrand during his talk at EuroBSDCon 2006
Reviewed by: gnn
