pointer to the corresponding struct thread to the thread ID (lwpid_t)
assigned to that thread. The primary reason for this change is that
libthr now internally uses the same ID as the debugger and the kernel
when referencing to a kernel thread. This allows us to implement the
support for debugging without additional translations and/or mappings.
To preserve the ABI, the 1:1 threading syscalls, including the umtx
locking API have not been changed to work on a lwpid_t. Instead the
1:1 threading syscalls operate on long and the umtx locking API has
not been changed except for the contested bit. Previously this was
the least significant bit. Now it's the most significant bit. Since
the contested bit should not be tested by userland, this change is
not expected to be visible. Just to be sure, UMTX_CONTESTED has been
removed from <sys/umtx.h>.
Reviewed by: mtm@
ABI preservation tested on: i386, ia64
applied to their permissions. Just calculate the
default dir mode once and use it consistently, rather than
trying to remember to calculate it everywhere it's needed.
* Rename some variables/functions/etc to try to make things clearer.
* Add separate flags to control fflag/acl restore
* Collect metadata restore into a single function for clarity
* Propagate errors in metadata restore back out to the client
* Fix some places where errors were being returned when they
shouldn't and vice-versa
* Modes are now always restored; ARCHIVE_EXTRACT_PERM just controls
whether or not umask is obeyed.
* Restore suid/sgid bits only if user/group matches archive
* Cache the last stat results to try to reduce the number of stat calls
archive_entry.
Update the Makefile MLINKS and manpage to bring it up-to-date with
the current status of archive_entry. At least the manpage actually
lists all of the functions now, even if it doesn't really yet explain
them all.
Mostly, these were being used correctly even though a lot of
variables and function names were mis-named.
In the process, I found and fixed a couple of latent bugs and
added a guard against adding an archive to itself.
a/././b/../b/../c/./../d/e/f now work correctly. And yes, a/b and a/c
both get created in this example; if you want, you can create an
entire dir heirarchy from a tar archive with only one entry.
More tweaks to umask support: umasks are now obeyed for all objects,
not just directories; the umask used is now the one in effect at the
corresponding call to archive_read_extract(), so clients that want to
tinker with umask during extract should get the expected behavior.
a fork, make sure that the current thread isn't detached and freed. As
a consequence the thread should be inserted into the head of the
active list only once (in the beginning).
umask in effect when the archive is closed
* Correct a typo that broke implicit dir creation for non-directories.
Thanks to: Garret A Wollman for pointing out my umask oversight
read_extract_dir (which creates directories in the archive). This
brings a number of advantages:
* FINALLY fix the problems creating dirs ending in "/." <sigh>
* Missing parent dirs now get created securely, just like explicit dirs.
(Created 0700 initially, then edited to 0755 at end of extraction.)
* Eliminate some duplicate code and some weird special cases.
While I'm cleaning, inline the regular-file creation code as well.
This change also pointed out one API deficiency: the
archive_read_data_into_XXX functions were originally defined to return
the total bytes read. This is, of course, ambiguous when dealing with
non-contiguous files. Change it to just return a status value.
with ``__'' to avoid polluting the namespace. This doesn't change the
documented rune interface at all, but breaks applications that accessed
_RuneLocale directly.
These routines are specified in C99 for the sake of
architectures where an int isn't big enough to represent
the full range of floating-point exponents. However,
even the 128-bit long double format has an exponent smaller
than 15 bits, so for all practical purposes, scalbln() and
scalblnf() are aliases for scalbn() and scalbnf(), respectively.
ki_childutime, and ki_emul. Also uses the timeradd() macro to correct
the calculation of ki_childtime. That will correct the value returned
when ki_childtime.tv_usec > 1,000,000.
This also implements a new KERN_PROC_GID option for kvm_getprocs().
It also implements the KERN_PROC_RGID and KERN_PROC_SESSION options
which were added to sys/kern/kern_proc.c revision 1.203.
PR: bin/65803 (a very tiny piece of the PR)
Submitted by: Cyrille Lefevre
kicking and screaming into the 1980's. This change converts most of
the markup from man(7) to mdoc(7) format, and I believe it removes or
updates everything that was flat out wrong. However, much work is
still needed to sanitize the markup, improve coverage, and reduce
overlap with other manpages. Some of the sections would better belong
in a philosophy_of_w_kahan.3 manpage, but they are informative and
remain at least as reminders of topics to cover.
Reviewed by: doc@, trhodes@
The big lines are:
NODEV -> NULL
NOUDEV -> NODEV
udev_t -> dev_t
udev2dev() -> findcdev()
Various minor adjustments including handling of userland access to kernel
space struct cdev etc.
file already exists on disk.
Pointed out by: www/resin3 port (whose distfile contains the same file
twice with different permissions and relies on the permissions associated
with the second instance)
Thanks again to: Kris Kennaway
This is a corresponding change to bin/67994. I'll soon commit
bin/67994 into 4-STABLE. Actually, 5-CURRENT's getaddrinfo()
doesn't have the problem mentiond in bin/67994. However, it is
good to be in sync variable name with 4-STABLE and KAME.
PR: bin/67994
Submitted by: JINMEI Tatuya <jinmei@ocean.jinmei.org>
* Restore directories with 0700 permissions initially,
then use the fixup pass to correct the permissions
* Trim trailing "/" and "/." in mkdirpath()
Suggested by: Garrett Wollman
sigsuspend, thread shouldn't wait, in old code, it may be
ignored.
When a signal handler is invoked in sigsuspend, thread gets
two different signal masks, one is in thread structure,
sigprocmask() can retrieve it, another is in ucontext
which is a third parameter of signal handler, the former is
the result of sigsuspend mask ORed with sigaction's sa_mask
and current signal, the later is the mask in thread structure
before sigsuspend is called. After signal handler is called,
the mask in ucontext should be copied into thread structure,
and becomes CURRENT signal mask, then sigsuspend returns to
user code.
Reviewed by: deischen
Tested by: Sean McNeil <sean@mcneil.com>
on all inputs of the form x.75, where x is an even integer and
log2(x) = 21. A similar problem occurred when rounding upward.
The bug involves the following snippet copied from rint():
i>>=1;
if((i0&i)!=0) i0 = (i0&(~i))|((0x100000)>>j0);
The constant 0x100000 should be 0x200000. Apparently this case was
never tested.
It turns out that the bit manipulation is completely superfluous
anyway, so remove it. (It tries to simulate 90% of the rounding
process that the FPU does anyway.) Also, the special case of +-0 is
handled twice (in different ways), so remove the second instance.
Throw in some related simplifications from bde:
- Work around a bug where gcc fails to clip to float precision by
declaring two float variables as volatile. Previously, we
tricked gcc into generating correct code by declaring some
float constants as doubles.
- Remove additional superfluous bit manipulation.
- Minor reorganization.
- Include <sys/types.h> explicitly.
Note that some of the equivalent lines in rint() also appear to be
unnecessary, but I'll defer to the numerical analysts who wrote it,
since I can't test all 2^64 cases.
Discussed with: bde
permission), try to continue in FTS_DONTCHDIR mode. Of course this
won't work for long paths, but we can't descend more than one pathname
component beyond the directory anyway if we lack search permission.
Here is a transcript demonstrating the change, where oldls is ls(1)
linked with the old fts(3):
das@VARK:~> mkdir t && touch t/{a,b,c} && chmod u-x t
das@VARK:~> oldls t
a b c
das@VARK:~> oldls -l t
das@VARK:~> \ls t
a b c
das@VARK:~> \ls -l t
ls: a: Permission denied
ls: b: Permission denied
ls: c: Permission denied
I had forgotten about this patch until bde reminded me. He reports
using it without problems for over a year.
PR: 45723
writable. Affected callers include fwrite(), put?(), and *printf().
The issue of whether this is the right errno for funopened streams is
unresolved, but that's an obscure case, and some errno is better than
no errno.
Discussed with: bde, jkh
distinguish files from dirs (trailing '/' indicated a dir). Since
POSIX.1-1987, this convention is no longer necessary. However, there
are current tar programs that pretend to write POSIX-compliant
archives, yet store directories as "regular files", relying on this
old filename convention to save them. <sigh> So, move the check for
this old convention so it applies to all tar archives, not just those
identified as "old."
Pointed out by: Broken distfile for audio/faad port
it sees a truncated input the first time it gets called.
(In particular, files shorter than 512 bytes cannot be tar archives.)
This allows the top-level archive_read_next_header code to
generate a proper error message for unrecognized file types.
Pointed out by: numerous ports that expect tar to extract non-tar files ;-(
Thanks to: Kris Kennaway
It does not appear to be possible to cross-build arm from i386 at the
moment, and I have no ARM hardware anyway. Thus, I'm sure there are
bugs. I will gladly fix these when the arm port is more mature.
Reviewed by: standards@
features appear to work, subject to the caveat that you tell gcc you
want standard rather than recklessly fast behavior
(-mieee-with-inexact -mfp-rounding-mode=d).
The non-standard feature of delivering a SIGFPE when an application
raises an unmasked exception does not work, presumably due to a kernel
bug. This isn't so bad given that floating-point exceptions on the
Alpha architecture are not precise, so making them useful in userland
requires a significant amount of wizardry.
Reviewed by: standards@
version called the higher-level archive_read_data and
archive_read_data_skip functions, which screwed up state management of
those functions. This bit of mis-design has existed for a long time,
but became a serious issue with the recent changes to the
archive_read_data APIs, which added more internal state to the
high-level archive_read_data function. Most common symptom was a
failure to correctly read 'L' entries (long filename) from GNU-style
archives, causing the message ": Can't open: No such file or
directory" with an empty filename.
Pointed out by: Numerous port build failures
Thanks to: Kris Kennaway
that as end-of-archive. Otherwise, a short read at this point
generates an error. This accomodates broken tar writers (such as the
one apparently in use at AT&T Labs) that don't even write a single
end-of-archive block.
Note that both star and pdtar behave this way as well.
In contrast, gtar doesn't complain in either case, and as a
result, will generate no warning for a lot of trashed archives.
Pointed out by: shells/ksh93 port (Thanks to Kris Kennaway)
push extract data down into archive_read_extract.c and out
of the library-global archive_private.h; push dir-specific
mode/time fixup down into dir restore function; now that the
fixup list is file-local, I can use somewhat more natural
naming.
Oh, yeah, update a bunch of comments to match current reality.
reflect src/libexec/rtld-elf/rtld.c rev. 1.68 - the globally-loaded
objects (RTLD_GLOBAL) are searched before the local object's DAG's.
PR: 62770
Submitted by: Kimura Fuyuki <fuyuki@nigredo.org>
We approximate pi with more than float precision using pi_hi+pi_lo in
the usual way (pi_hi is actually spelled pi in the source code), and
expect (float)0.5*pi_lo to give the low part of the corresponding
approximation for pi/2. However, the high part for pi/2 (pi_o_2) is
rounded to nearest, which happens to round up, while the high part for
pi was rounded down. Thus pi_o_2+(float)0.5*pi (in infinite precision)
was a very bad approximation for pi/2 -- the low term has the wrong
sign and increases the error drom less than half an ULP to a full ULP.
This fix rounds up instead of down for pi_hi. Consistently rounding
down instead of up should work, and is the method used in e_acosf.c
and e_asinf.c. The reason for the difference is that we sometimes
want to return precisely pi/2 in e_atan2f.c, so it is convenient to
have a correctly rounded (to nearest) value for pi/2 in a variable.
a_acosf.c and e_asinf.c also differ in directly approximating pi/2
instead pi; they multiply by 2.0 instead of dividing by 0.5 to convert
the approximation.
These complications are not directly visible in the double precision
versions because rounding to nearest happens to round down.
* New read_data_block is both sparse-file aware and uses zero-copy semantics
* Push read_data_block down into specific formats (opens door to
various encoded entry bodies, such as zip or gtar -S)
* Reimplement read_data, read_data_skip, read_data_into_fd in terms
of new read_data_block.
* Update documentation
It's unfortunate that I couldn't just call the new interface
archive_read_data, but didn't want to upset the API that much.
and not tanf() because float type can't represent numbers large enough
to trigger the problem. However, there seems to be a precedent that
the float versions of the fdlibm routines should mirror their double
counterparts.
Also update to the FDLIBM 5.3 license.
Obtained from: FDLIBM
Reviewed by: exhaustive comparison
where the exponent is an odd integer and the base is negative).
Obtained from: fdlibm-5.3
Sun finally released a new version of fdlibm just a coupe of weeks
ago. It only fixes 3 bugs (this one, another one in pow() that we
already have (rev.1.9), and one in tan(). I've learned too much about
powf() lately, so this fix was easy to merge. The patch is not verbatim,
because our base version has many differences for portability and I
didn't like global renaming of an unrelated variable to keep it separate
from the sign variable. This patch uses a new variable named sn for
the sign.
[t=p_l+p_h High]. We multiply t by lg2_h, and want the result to be
exact. For the bogus float case of the high-low decomposition trick,
we normally discard the lowest 12 bits of the fraction for the high
part, keeping 12 bits of precision. That was used for t here, but it
doesnt't work because for some reason we only discard the lowest 9
bits in the fraction for lg2_h. Discard another 3 bits of the fraction
for t to compensate.
This bug gave wrong results like:
powf(0.9999999, -2.9999995) = 1.0000002 (should be 1.0000001)
hex values: 3F7FFFFF C03FFFFE 3F800002 3F800001
As explained in the log for the previous commit, the bug is normally
masked by doing float calculations in extra precision on i386's, but
is easily detected by ucbtest on systems that don't have accidental
extra precision.
This completes fixing all the bugs in powf() that were routinely found
by ucbtest.
(1) The bit for the 1.0 part of bp[k] was right shifted by 4. This seems
to have been caused by a typo in converting e_pow.c to e_powf.c.
(2) The lower 12 bits of ax+bp[k] were not discarded, so t_h was actually
plain ax+bp[k]. This seems to have been caused by a logic error in
the conversion.
These bugs gave wrong results like:
powf(-1.1, 101.0) = -15158.703 (should be -15158.707)
hex values: BF8CCCCD 42CA0000 C66CDAD0 C66CDAD4
Fixing (1) gives a result wrong in the opposite direction (hex C66CDAD8),
and fixing (2) gives the correct result.
ucbtest has been reporting this particular wrong result on i386 systems
with unpatched libraries for 9 years. I finally figured out the extent
of the bugs. On i386's they are normally hidden by extra precision.
We use the trick of representing floats as a sum of 2 floats (one much
smaller) to get extra precision in intermediate calculations without
explicitly using more than float precision. This trick is just a
pessimization when extra precision is available naturally (as it always
is when dealing with IEEE single precision, so the float precision part
of the library is mostly misimplemented). (1) and (2) break the trick
in different ways, except on i386's it turns out that the intermediate
calculations are done in enough precision to mask both the bugs and
the limited precision of the float variables (as far as ucbtest can
check).
ucbtest detects the bugs because it forces float precision, but this
is not a normal mode of operation so the bug normally has little effect
on i386's.
On systems that do float arithmetic in float precision, e.g., amd64's,
there is no accidental extra precision and the bugs just give wrong
results.
there's no need to enable support for it separately
from 'tar.' (The call to enable gnutar support is
now just an alias for the tar support, left in to
avoid API breakage.)
multibyte representation in conversion state objects, store the
accumulated wide character, set number and number of bytes remaining
to avoid having to derive them every time mbrtowc() is called.
certain flags set (e.g., schg or uappend) would fail because the flags
were restored before the hardlink was created.
To address this, I've generalized the existing machinery for deferring
directory timestamp/mode restoration and used it to defer the
restoration of highly-restrictive flags to the end of the extraction,
after any links have been created.
Pointed out by: Pawel Jakub Dawidek (pjd@)
through byte by byte with mbrtowc(). In the usual case (buffer is big
enough to contain the multibyte character, character does not straddle
buffer boundary) this results in only one call to mbrtowc() for each
wide character read.
to the initial state when a stream is opened or seeked upon. Use the
stream's conversion state object instead of a freshly-zeroed one in
fgetwc(), fputwc() and ungetwc().
This is only a performance improvement for now, but it would also be
required in order to support state-dependent encodings.
followed are: Only 3 functions (pthread_cancel, pthread_setcancelstate,
pthread_setcanceltype) are required to be async-signal-safe by POSIX. None of
the rest of the pthread api is required to be async-signal-safe. This means
that only the three mentioned functions are safe to use from inside
signal handlers.
However, there are certain system/libc calls that are
cancellation points that a caller may call from within a signal handler,
and since they are cancellation points calls have to be made into libthr
to test for cancellation and exit the thread if necessary. So, the
cancellation test and thread exit code paths must be async-signal-safe
as well. A summary of the changes follows:
o Almost all of the code paths that masked signals, as well as locking the
pthread structure now lock only the pthread structure.
o Signals are masked (and left that way) as soon as a thread enters
pthread_exit().
o The active and dead threads locks now explicitly require that signals
are masked.
o Access to the isdead field of the pthread structure is protected by both
the active and dead list locks for writing. Either one is sufficient for
reading.
o The thread state and type fields have been combined into one three-state
switch to make it easier to read without requiring a lock. It doesn't need
a lock for writing (and therefore for reading either) because only the
current thread can write to it and it is an integer value.
o The thread state field of the pthread structure has been eliminated. It
was an unnecessary field that mostly duplicated the flags field, but
required additional locking that would make a lot more code paths require
signal masking. Any truly unique values (such as PS_DEAD) have been
reborn as separate members of the pthread structure.
o Since the mutex and condvar pthread functions are not async-signal-safe
there is no need to muck about with the wait queues when handling
a signal ...
o ... which also removes the need for wrapping signal handlers and sigaction(2).
o The condvar and mutex async-cancellation code had to be revised as a result
of some of these changes, which resulted in semi-unrelated changes which
would have been difficult to work on as a separate commit, so they are
included as well.
The only part of the changes I am worried about is related to locking for
the pthread joining fields. But, I will take a closer look at them once this
mega-patch is committed.
character, as some tar implementations incorrectly include a '/' with
the prefix.
Thanks to: Divacky Roman for the UnixWare 7 tarfile that
demonstrated this issue.
code available at tuhs.org, and found out that my chronology
is a bit off. In particular, Seventh Edition already used
the "linkflag" and "linkname" fields. Also, it appears that
there was no tar in Sixth Edition, contrary to what an earlier
tar.1 manpage claimed.
A few mdoc fixes also crept in here.
the size field for a hardlink entry. Specifically, ensure that
we do obey the size field for archives that we know are pax interchange
format archives, as required by POSIX.
Also, clarify the comment explaining why this is necessary and explain
the (very unusual) conditions under which it might fail.
a non-zero size but no body, some write a non-zero size and include
a body. To distinguish these cases, look for a valid tar header immediately
following a hardlink header with non-zero size.
of fcntl(2), flock(2), and lockf(3) advisory locks.
Add such a paragraph to the flock(2) manpage for the
sake of consistency.
Reviewed by: Cyrille Lefevre and Kirk McKusick on -arch
MFC after: 2 weeks
Correct my previous commit and add a comment to the manpage
indicating that the user must set errno to 0 if they wish to
distinguish "no such user" from "error".
Pointed out by: Jacques Vidrine (nectar@)
low bound, and the number of bytes remaining instead of storing the
raw byte sequence and deriving them every time mbrtowc() is called.
This is much faster -- about twice as fast in some crude benchmarks.
constants the wrong way on the VAX. Instead, use C99 hexadecimal
floating-point constants, which are guaranteed to be exact on binary
IEEE machines. (The correct hexadecimal values were already provided
in the source, but not used.) Also, convert the constants to
lowercase to work around a gcc bug that wasn't fixed until gcc 3.4.0.
Prompted by: stefanf
Main ones: mostly use conditional expressions in ifdefs instead of a
mixture of conditional expressions and nested ifdefs.
Nearby ones:
- don't do less than echo the code in the comment about libc_r
- fixed some internal insertion sort errors and indentation errors.
Remove "sys/types.h" as "sys/param.h" is already included
Use cast rather than back-pointer to convert from public to private
version of FTS data, and so avoid littering fts.h with any of the
details.
Pointed out By: bde, kientzle
"A trailing newline is added if none is present."
The code in syslogd, stderr, and console output always adds a newline
at the EOL. However, the existing code never actually removed a
trailing newline, and apparently relied on syslogd to convert it
into a space character. Thus, the existing newline was converted
to a trailing space at the EOL by syslogd, while stderr, and console
output resulted in an empty line.
MFC after: 2 weeks
RuneRange arrays. This is much faster when there are hundreds of
ranges (as is the case in UTF-8 locales) and was inspired by a
similar change made by Apple in Darwin.
of stat(2) calls by keeping an eye of the number of links a directory
has. It assumes that each subdirectory will have a hard link to its
parent, to represent the ".." node, and stops calling stat(2) when
all links are accounted for in a given directory.
This assumption is really only valid for UNIX-like filesystems: A
concrete example is NTFS. The NTFS "i-node" does contain a link
count, but most/all directories have a link count between 0 and 2
inclusive. The end result is that find on an NTFS volume won't
actually traverse the entire hierarchy of the directories passed
to it. (Those with a link count of two are not traversed at all)
The fix checks the "UFSness" of the filesystem before enabling the
optimisation.
Reviewed By: Tim Kientzle (kientzle@)
*printf() and *scanf(). Currently, this reduces the size of libc.so
by 9K on i386. But the real savings are for static binaries that use
*printf() or *scanf() but not strtod(); with an FP-disabled libc,
these binaries will not depend on the gdtoa routines, making each
binary about 22K smaller.
floating-point support, remove default definition of FLOATING_POINT
from the source, and change the compile-time option to
NO_FLOATING_POINT.
- Remove the HEXFLOAT option. It saves an insignificant amount of
space (<0.1% of the size of libc on i386) and complicates vfprintf()
and checkfmt().
-U flag to bsdtar. Essentially, this option breaks existing hard
links. According to SUSv2, tar is supposed to overwrite existing
files on extract by default which, in particular, preserves
existing hard links. Note that this is yet another bug in gtar; it
appears to always break existing links. (Maybe gtar's -U is broken?)
I'm unsure about how to handle this for other file types; the current
code always unlinks first unless the NO_OVERWRITE flag is specified.
I've commented this issue liberally and will come back to it later.
archive formats supported by libarchive, with some information about
the relative strengths and weaknesses of each format and notes about
issues with libarchive's support for those formats.
This page should make it unnecessary to list all of the libarchive
formats in the manpage of each program that uses libarchive.
Such programs can simply refer to libarchive-formats(5).
* little-endian old-style binary cpio archives
* big-endian old-style binary cpio archives
* SVR4 portable archives without CRC
* SVR4 portable archives with CRC
Note that I don't yet verify the CRC for the last one, and I'm
not quite certain I'm correctly parsing device numbers.
MS-CHAPv1 MPPE-keys).
- Added rad_demangle_mppe_key() for demangling mppe-keys (needed
for MPPE-keys).
- Added some typecasts for avoiding compiler warnings.
- Fix: better handle wrong usage of the lib (if the programmer
has not called rad_create_request() but rad_put_*(), then a
weird error message was returned).
- Added a new function for putting the Message-Authenticator.
- Verify the Message-Authenticator, if it was found inside a
response packet and silently drop the packet, if the validation
failed.
- Implicitly put the Message-Authenticator, if the EAP-Message
attribute was added.
- Added some missing defines.
Submitted by: Michael Bretterklieber
PR: 46555
The new fflags support in archive_entry supports Linux and FreeBSD
file flags and is a bit more gracious about unrecognized flag names
than strtofflags(3). This involves some minor API breakage.
The default tar format ("restricted pax") now enables pax extensions
when archiving files that have flags. In particular, copying dir
heirarchies with 'bsdtar cf - -C src . | bsdtar xpf - -C dest' now
preserves file flags. (Note the "p" on extract!)
While I'm here, fill in some additional explanation in the
archive_entry.3 manpage, fill in some missing MLINKS, mark some
overlooked internal functions 'static', and make a few minor style
fixes.
namespaces are visible. Previously, math.h failed to hide some C99-,
XSI-, and BSD-specific symbols in certain compilation environments.
The referenced PR has a nice listing of the appropriate conditions for
making symbols visible in math.h. The only non-stylistic difference
between the patch in the PR and this commit is that I superfluously
test for __BSD_VISIBLE in a few places to be more explicit about which
symbols have historically been part of the FreeBSD environment.
PR: 65939
Submitted by: Stefan Farfeleder <stefan@fafoe.narf.at>
makeing sure the spinlock isn't already in use might be a nice feature to
have in theory, it's hard to implement in practice since the passed in
pointer may not be NULL, but still be an invalid value (i.e. 1..2..3.. etc).
The original might have pointers to user-specified strings;
copying the string (instead of just the pointer) protects against
the client re-using their own buffers.
I'm trying hard to avoid dumping all of the 'set' string functions
in favor of slower, but more predictable 'copy' semantics.
after their change from an array of char to an array of enum.
This fixes problems that occurred when using positional arguments in
format strings, particularly with more than STATIC_ARG_TBL_SIZE (8)
of them.
PR: 65841
Submitted by: Steven Smith (mostly)
adjunct maps are used. One symtom of this bug is sshd saying:
login_get_lastlog: Cannot find account for uid X
when logging in. The problem here is caused by an incorrect reuse of the rv
variable when previous values are needed later.
High-resolution mtime/ctime/atime is not POSIX-standard, so hide
set/get of high-resolution time fields behind easily-mutable macros.
That makes it easier to change how those fields are accessed.
res_search only incremented got_servfail for h_errno == TRY_AGAIN *AND*
hp->rcode == SERVFAIL. However, there are cases such as timeouts where
rcode is not always set to SERVFAIL. This leads to inconsistent nameserver
operation during multi-domain and truncated dot searches, especially during
booting when portions of the network are being brought up simultanious with
dns lookups.
This patch attempts to correct the problem by unconditionally terminating
the search if TRY_AGAIN is returned (after res_query has gone through all
retries and name servers) instead of trying other domain elements in the
domain seach path.
This patch should fix reported problems (which I can reproduce) with some
NFS mounts failing during boot. This occured because mount_nfs thought the
host name lookup returned a definitive failure using a non-dotted host name
when, in fact, it timed out on the first part (host.search.domain.name) and
got a definitive host-not-found response on the second part (host.).
Generally speaking, search path name server timeouts can exceed 60 seconds
per element and most machines which consistently timeout on earlier portions
of a search path are effectively non-operational due to the imposed delays.
It is more important for DNS lookups to return the proper error code then
to be able to recover a valid lookup in later portions of the search path
in these situations.
Obtained from: DragonFly
MFC after: 3 weeks
Earlier versions of FreeBSD don't support ACLs.
Note that the ACL support code in archive_entry is standalone code and
unaffected by this. (In particular, it should be possible to
manipulate archives containing ACLs even if the ACLs cannot be
restored on the current system.)
* Re-use a single buffer for shar output formatting rather
than hammering the heap. (archive_write_set_format_shar.c)
* Fix a handful of minor memory leaks and clean up some of the
memory-management code.
try to set ACLs even if fflag restore fails, first cut at reading
Solaris tar ACLs
Code improvement: merge gnu tar read support into main tar reader;
this eliminates a lot of duplicate code and generalizes the tar
reader to handle formats with GNU-like extensions.
Style: Makefile cleanup, eliminate 'dmalloc' references, remove 'tartype'
from archive_entry (this makes archive_entry more format-agnostic)
Thanks to: David Magda for providing Solaris tar test files
mode (where the forked thread is the one and only thread and
is marked as system scope), set the system scope flag before
initializing the signal mask. This prevents trying to use
internal locks that haven't yet been initialized.
Reported by: Dan Nelson <dnelson at allantgroup.com>
Reviewed by: davidxu
* ACL storage is no longer erased before a group of entries are added.
* ACL text creation no longer tries to skip over non-existent text.
* UTF8 encoder no longer blows up on invalid wide characters.
* Fixed ACL state management for default ACLs.
Also, publicize function for obtaining text-format ACL in various
formats. The interface is now extensible through a "flags" argument
that allows you to select a variant format.
with 'star' ACL handling, though there's still a
bit more work needed in this area.
Added 'write_open_fd' and 'read_open_fd' to simplify, e.g.,
tar's u and r modes. Eliminated old 'write_open_file_position'
as a bad idea. (It required closing/reopening files to
do updates, which led to unpleasant implications.)
Various other minor fixes, API tweaks, etc.
on temporary nameserver failure. This is necessary to get
getipnodebyname(3) to correctly return h_errno=TRY_AGAIN instead
of HOST_NOT_FOUND.
Reviewed by: green, thomas
MFC after: 1 week
case where an /etc/nsswitch.conf file was present, but could not
be opened (e.g. due to permissions). Previously, the open failure
condition was suppressed, and the built-in defaults were used. In
revision 1.11, however, propagated the open failure causing all
nsdispatch() invocations to return NS_UNAVAIL, and thus many APIs
including getpwnam and gethostbyname unconditionally failed.
This commit restores the previous behavior.
Pointy hat: nectar (+1 for obstinance; ache had to use clue bat)
Reported by: ache
solved by a simple 'make world'. The signalcontext function was going
to the trouble of generating an even 16 byte alignment, but in fact it
needed to be odd aligned to simulate the 8-byte return address having
been pushed by the caller. This fixes yet another group of crashes in
applications using libpthread. And yet again, it was my fault all along.
While here, rename the duplicate internal ctx_wrapper() functions to
makectx_wrapper() and sigctx_wrapper() so that traces aren't ambiguous.
library, it may pull in that thread library at run time. If the
process started out single-threaded, this could cause attempts to
release locks that do not exist. Guard against this possibility by
checking __isthreaded before invoking thread primitives.
A similar problem remains if the process is linked against one thread
library, but the NSS module is linked against another. This can only
be avoided by careful design of the NSS module.
Submitted by: Sean McNeil <sean@mcneil.com> (mostly; bugs are mine)
functionality spelled out in SUSv3.
o Signal of 0 means do everything except send the signal
o Check that the signal is not invalid
o Check that the target thread is not dead/invalid
sigprocmask no longer needs to be wrapped.
o raise(3) is applied to the calling thread in a threaded program.
o In the sigaction wrapper reference the correct structure.
o Don't treat SIGTHR especially anymore (infact it won't exist in
a little while).
we still have to DTRT when an asynchronously cancellable thread is
cancelled while waiting for a mutex.
o While dequeueing a waiting mutex don't skip a thread if it has
a cancel pending. Only skip it if it is also async cancellable.
the cause of any bugs because it is *always* indirectly set
in the for...loop, but better to be explicit about it.
o Check the magic number of the passed in thread only after it has
been found in the active thread list. Otherwise, if the check is done
at the very beginning we may end up pointing to garbage if the
thread was once a valid thread, but has now been destroyed.
* Disabled shared-library building, as some API breakage is
still likely. (I didn't realize it was turned on by default.) If
you have an existing /usr/lib/libarchive.so.2, I recommend deleting it.
* Pax interchange format now correctly stores and reads UTF8
for extended attributes. In particular, pax format can portably
handle arbitrarily long pathnames containing arbitrary characters.
* Library compiles cleanly at -O2, -O3, and WARNS=6 on all
FreeBSD-CURRENT platforms.
* Minor portability improvements inspired by Juergen Lock
and Greg Lewis. (Less reliance on stdint.h, isolating of
various portability-challenged constructs.)
* archive_entry transparently converts multi-byte <-> wide character
strings, allowing clients and format handlers to deal with either
one, as appropriate.
* Support for reading 'L' and 'K' entries in standard tar archives
for star compatibility.
* Recognize (but don't yet handle) ACL entries from Solaris tar.
* Pushed format-specific data for format readers down into
format-specific storage and out of library-global storage. This
should make it easier to maintain individual formats without mucking
with the core library management.
* Documentation updates to track the above changes.
* Updates to tar.5 to correct a few mistakes and add some additional
information about GNU tar and Solaris tar formats.
Notes:
* The basic 'tar' reader is getting more general; there's not much
point in keeping the 'gnutar' reader separate. Merging the two
would lose a bunch of duplicate code.
* The libc ACL support is looking increasingly inadequate for my needs
here. I might need to assemble some fairly significant code for
parsing and building ACLs. <sigh>
ferror(), fileno() and clearerr(), using the value of __isthreaded to
decide between the fast inline single-threaded code and the more
general function equivalent. This gives most of the performance
benefits of the old unsafe macros while preserving thread safety.
addresses. For arch's with 64-bit longs, this is a nop, but for i386 this
allows sysinstall to properly handle disks and filesystems > 1 TB.
Changes from the original patch include:
- Use d_addr_t rather than inventing a blkcnt type based on int64_t.
- Use strtoimax() rather than strtoull() to parse d_addr_t's from config
files.
- Use intmax_t casts and %jd rather than %llu to printf d_addr_t values.
Tested on: i386
Tested by: kuriyama
Submitted by: julian
MFC after: 1 month
