(wchar_t is defined in stddef.h, and only two files need more than that.)
Portability: Since the wchar requirements are really quite modest,
it's easy to define basic replacements for wcslen, wcscmp, wcscpy,
etc, for use on systems that lack <wchar.h>. In particular, this allows
libarchive to be used on older OpenBSD systems.
The OpenFirmware console isn't used on real systems anymore and
I never get to multi-user mode in psim. There are problems with
zs that need to be resolved before these lines can be enabled.
This eliminates disconcerting warnings on boot.
MFC after: 2 days
is aligned with the sectorsize value returned by GEOM, before
doing a bread() of the superblock.
This eliminates a panic when trying the following on an empty CD-ROM drive:
mount_ext2fs /dev/acd0 /mnt
Reviewed by: phk
pmap_bootstrap by using the sync;isync big hammer to make sure
all prior operations have completed.
Reported by: Nathan Whitehorn <nathan at uchicago edu>
MFC after: 2 days
list of frame sniffers so that trapframes can be detected. The kluge
is needed because this version of gdb only supports appending a
sniffer to the list of sniffers and the moment kgdb gets a chance to
add its own frame sniffer, the target's default frame sniffer is
already in the list. Since the default frame sniffer claims any
frame thrown at it, kgdb's frame sniffer never gets to smell (a
process much akin to tasting, but with lesser chance of hurling :-)
This commit adds dummy frame sniffers that never claim a frame and
as such don't fix anything yet. However, we now have frame sniffers
and they are being called, so it's just a matter of adding meat to
the bones and we'll be able to properly unwind across trapframes.
MFC after: 1 week
* New definition CHN_F_HAS_VCHAN.
- channel.c
* Use CHN_F_HAS_VCHAN to mark channel with vchan capability instead
of relying on SLIST_EMPTY(&channel->children) == true for better
clarification and future possible usages of children (like
'slave' channel).
* Various fixes, including blocksize / format bps allignment,
better 24bit seeking (mplayer, others).
* Improve format chain building, it's now possible to record something
to a format non-native to the soundcard through various feeder format
converters or to higher sampling rate. This also gains another feature,
like doing vchan mixing on non s16le soundcard such as sb8.
- sound.c
* Increase robustness within various function that handle vchan
creation / termination (these function need a total rewrite, but
that would cause other major rewrite within various places too!).
As far as its robustness can be guaranteed, leave it as is.
* Optimize channel ordering, prefer *real* hardware playback
channels over virtual channels. cat /dev/sndstat should look
better.
* Increase sndstat verbosity to include bufsoft/bufhard allocation.
- vchan.c
* Fix LOR 119.
- http://sources.zabbadoz.net/freebsd/lor.html#119
* Reorder / increase robustness of vchan_create() / destroy().
Enforce destroy_dev() during destroy operation, fix possible
panic / dangling character device.
- http://lists.freebsd.org/pipermail/freebsd-current/2005-May/050308.html
* Tolerate a little bit more during mixing process, this should help
non s16le soundcards.
Note: Recoring in a non-native rate/format may result in overruns. A friendly
application is wavrec from audio/wavplay. The problem is under
investigation.
Submitted by: Ariff Abdullah <skywizard@MyBSD.org.my>
From the PR:
---snip---
The vibra16X supports full duplex. I traced the Windows driver, and what is
does is that it programs one DMA channel 8-bit, and the other 16-bit. There
might be some kind of auto detection logic here, because it always uses 8-bit
for playback, even if I play 16-bit sound ...
---snip---
PR: 80977
Submitted by: Hans Petter Selasky <hselasky@c2i.net>
locks were not aquired because the user buffers were not wired, thus it was
possible that that SYSCTL_OUT could sleep, causing a number of different
problems such as lock ordering issues and dead locks.
-Wire user supplied buffer to ensure SYSCTL_OUT will not sleep.
-Pickup ifnet locks to protect the list.
-Where applicable pickup address locks.
-Pickup radix node head locks.
-Remove splnet stubs
-Remove various comments about locking here, because they are no
longer needed.
It is the hope that these changes will make sysctl_rtsock MP safe.
MFC after: 3 weeks
termination with set -e if a command fails in a loop body inside a function
with an explicitely tested exit status, eg
f() {
for i in 1 2 3; do
false
done
}
f || true
Briefly reviewed by: cracauer
two cases of unwanted termination with set -e:
* if-commands containing several commands separated by semicolons, eg
if false; false; then [...]
* functions with an explicitely tested exit status that contain a failing
command which is not the last one, eg
f() {
false
false
}
f || true
PR: 77067, 85267
Briefly reviewed by: cracauer
has been done in icmp_input() already.
This fixes the ICMP_UNREACH_NEEDFRAG case where no MTU was
proposed in the ICMP reply.
PR: kern/81813
Submitted by: Vitezslav Novy <vita at fio.cz>
MFC after: 3 days
Reduce the size of ed a little by removing some CIS based entries (others
likely can be removed too):
o The D-Link DFE-670TXD doesn't need its own entry based on strings.
o The Xircom CompactCard appears to be a TDK design, so list it there by ID
and remove the strings.
Increase the size of ed a little:
o Add support for the Addtron AE-660CT and Addtron AE-660. This is a very
generic NE-2000 clone (so generic that its CIS tags say NE-2000 generic
card!).
take the lock from interrupt context, which causes an implicit
lock order reversal. We've been using the lock carefully enough
that making it a spin lock should not be harmful.
- The first "alias" "Yes" should be "No**".
- Made "builtin echo command" consistent with csh and sh manpages.
- In group of 3 interactive commands, 2 used .Pa instead of .Ic.
- "Name" section now has "builtin" and "built-in" for better apropos.
- Added these builtins: !, %, ., :, @, {, }, local, return
PR: docs/85065
Approved by: keramida
MFC after: 3 days
first interface is detached from parent and then bpfdetach() is called.
If the interface was the last carp(4) interface attached to parent, then
the mutex on parent is destroyed. When bpfdetach() calls if_setflags()
we panic on destroyed mutex.
To prevent the above scenario, clear pointer to parent, when we detach
ourselves from parent.
UMA boot pages.
Disable recursion on the general UMA lock now that startup_alloc() no
longer uses it.
Eliminate the variable uma_boot_free. It serves no purpose.
Note: This change eliminates a lock-order reversal between a system
map mutex and the UMA lock. See
http://sources.zabbadoz.net/freebsd/lor.html#109 for details.
MFC after: 3 days
renewal, or we lose link, be more forceful about clearing interface
state so another interface that connects to the same network has a
chance of working. This doesn't address attemping to connect to both at
once, but appears to allow unplugging from a wired interface and then
inserting a wireless card that associates with an AP bridged to the same
LAN.
